VIGS-Mediated Forward Genetics Screening for Identification of Genes Involved in Nonhost Resistance

Summary

Virus-induced gene silencing is an useful tool for identifying genes involved in nonhost resistance of plants. We demonstrate the use of bacterial pathogens expressing GFPuv in identifying gene silenced plants susceptible to nonhost pathogens. This approach is easy, fast and facilitates large scale screening and similar protocol can be applied to studying various other plant-microbe interactions.

Abstract

Nonhost disease resistance of plants against bacterial pathogens is controlled by complex defense pathways. Understanding this mechanism is important for developing durable disease-resistant plants against wide range of pathogens. Virus-induced gene silencing (VIGS)-based forward genetics screening is a useful approach for identification of plant defense genes imparting nonhost resistance. Tobacco rattle virus (TRV)-based VIGS vector is the most efficient VIGS vector to date and has been efficiently used to silence endogenous target genes in Nicotiana benthamiana.

In this manuscript, we demonstrate a forward genetics screening approach for silencing of individual clones from a cDNA library in N. benthamiana and assessing the response of gene silenced plants for compromised nonhost resistance against nonhost pathogens, Pseudomonas syringae pv. tomato T1, P. syringae pv. glycinea, and X. campestris pv. vesicatoria. These bacterial pathogens are engineered to express GFPuv protein and their green fluorescing colonies can be seen by naked eye under UV light in the nonhost pathogen inoculated plants if the silenced target gene is involved in imparting nonhost resistance. This facilitates reliable and faster identification of gene silenced plants susceptible to nonhost pathogens. Further, promising candidate gene information can be known by sequencing the plant gene insert in TRV vector. Here we demonstrate the high throughput capability of VIGS-mediated forward genetics to identify genes involved in nonhost resistance. Approximately, 100 cDNAs can be individually silenced in about two to three weeks and their relevance in nonhost resistance against several nonhost bacterial pathogens can be studied in a week thereafter. In this manuscript, we enumerate the detailed steps involved in this screening. VIGS-mediated forward genetics screening approach can be extended not only to identifying genes involved in nonhost resistance but also to studying genes imparting several biotic and abiotic stress tolerances in various plant species.

Introduction

Nonhost resistance is the resistance of all plant species against races of a particular pathogen^1,2. This imparts broad spectrum and durable disease resistance in plants^2,3. However, its mechanism, particularly against bacterial pathogens, is not well understood⁴. Screening for mutants or silenced plants that compromise nonhost resistance, and high throughput transcript profiling for identification of differentially expressed genes during nonhost resistance^5-9 are two major approaches previously used for dissecting bacterial nonhost resistance. Because nonhost resistance is controlled by a complex mechanism(s)⁴ with the involvement of many genes, a high throughput functional genomic approach for gene identification is critical for better understanding the nonhost resistance mechanism(s).

Virus-induced gene silencing (VIGS) has been successfully used to silence endogenous plant genes in many plant species^10,11. Nicotiana benthamiana is one of the best suited plants for VIGS^10,12 and its draft genome sequence is now available¹³. Tobacco rattle virus (TRV)-based VIGS has been widely used as reverse genetics tool to characterize genes involved in nonhost resistance^2,4,14. This VIGS vectors and derivatives are now available through Arabidopsis Biological Resource Center (ABRC, http://www.arabidopsis.org/abrc/catalog/individ_cloned_gene_1.html). VIGS has also been used as a forward genetics tool for identifying genes involved in plant immunity^15-17, especially nonhost resistance^6,18. Assessing hypersensitive response (HR)-mediated cell death induced by plants against a specific nonhost pathogen and assessing the disease induced cell death are two major assays mainly used for identifying susceptible gene silenced plants. However, HR cell death is induced only against type-II nonhost pathogens and not against the type-I nonhost pathogens². Hence, HR assays cannot be universally used to identify nonhost resistance strategies used by plants, especially against wide range of type-I nonhost pathogens. Also, partial loss of nonhost resistance in a gene silenced plant does not always lead to disease symptoms⁶ and hence disease scoring cannot be used for identifying plants compromising nonhost resistance. In contrary, assessing the growth of nonhost pathogens in the gene silenced plants is a better method for studying the loss of nonhost resistance in gene silenced plants.

Compared to conventional growth assay^6,19, a faster method for assessing nonhost bacterial growth on the gene silenced plants can shorten the time required for forward genetics screening. We earlier reported a method for observing bacterial pathogen growth on leaves by naked eye under ultraviolet (UV) light using bacteria expressing green fluorescent protein (GFP)¹⁹. In this manuscript we demonstrate the usefulness of GFPuv expressing nonhost bacterial pathogens for easy identification of gene silenced plants that are compromised for nonhost resistance. This methodology is accurate for identification of susceptible plants and amenable for high throughput screening.

Protocol

1. Plant Growth and Target Gene Silencing

1. Plant growth conditions:
   1. Sow N. benthamiana seeds on soil-less potting mixture, Metro-Mix 350 and germinate the seeds in a growth chamber. Any other soil or soil-less medium can also be used instead of Metro-Mix.
   2. Transplant three-week old seedlings into individual pots and grow them in a greenhouse maintained at 21±2 °C along with other growth conditions as detailed in previous literature¹². Two to three days after transplanting, plants can be used for TRV inoculation.
2. Growing TRV2 clones:
   TRV is a bipartite virus and its genome consists of RNA1 and RNA2. RNA1 encodes an RNA-dependent RNA polymerase and a movement protein^20,21. RNA2 encodes a coat protein (CP) and two nonstructural proteins from the subgenomic RNAs²¹. Both RNA1 and RNA2 are required for the formation of matured virus particles and their spread^20,21. cDNA library construction in TRV2 vector is described in previous literature^22,23. Briefly, VIGS library used in this study was constructed from the RNA extracted from leaf tissues exposed to various biotic and abiotic elicitors.
   1. Take out Agrobacterium (GV2260 strain) containing the cDNA clones in TRV2 vector (a 96-well plate) from the freezer. Gradually thaw them and after the cultures reach room temperature, inoculate the individual Agrobacterium culture onto Luria-Bertani (LB) agar plate with rifampicin (10 μg/ml) and kanamycin (50 μg/ml) using a 96-pin replicator.
   2. Incubate the plates at 28 °C for two days. We usually grow four replicate colonies for each clone so that adequate Agrobacterium inoculum is available for prick inoculation of two plants. Perform all the steps under sterile conditions.
3. VIGS:
   1. Grow Agrobacterium (GV2260) carrying TRV1 at 28 °C in LB liquid medium with antibiotics mentioned above. Harvest cells by centrifugation from overnight grown cultures, re-suspend in the inoculation buffer (10 mM MES, pH 5.5; 200 μM acetosyringone), and incubate for 3 hr at room temperature on a shaker at 50 rpm.
   2. Harvest the cells by centrifugation and re-suspend in 5 mM MES buffer (pH 5.5) and inoculate (OD₆₀₀ = 0.3) into abaxial side of 3-4 N. benthamiana leaves using a needleless syringe. Detailed inoculation procedure is demonstrated in previous literature²⁴. Later, at the site of TRV1 inoculation, inoculate respective TRV2 colonies by pricking the leaves with a toothpick.
   3. Maintain the plants with adequate nutrition as vigorous growth is important for efficient VIGS¹². About two weeks post inoculation the transcripts of targeted genes will begin to reduce and the plants are ready for pathogen inoculation at three weeks after TRV inoculation.

2. Preparation of Nonhost Pathogen Cultures and Plant Inoculation

1. Details of pathogens used in this study:
   Pseudomonas syringae pv. tabaci, P. syringae pv. tomato T1, P. syringae pv. glycinea and Xanthomonas campestris pv. vesicatoria are used in this study. Grow P. syringae strains in King's B (KB) liquid medium supplemented with rifampicin (10 μg/ml), kanamycin (50 μg/ml) at 28 °C for 12 hr. Grow X. campestris pv. vesicatoria in LB liquid medium for 16 hr. All pathogens harbor a plasmid that can express GFPuv as described in previous literature¹⁹.
2. Preparation of pathogen cultures for plant inoculation:
   1. Harvest bacterial cells by centrifugation and confirm the presence of green fluorescence using long wavelength UV lamp in the dark. Wash the cells twice with sterile water and re-suspend them to the desired concentration using sterile water.
   2. Inoculate the respective pathogen(s) on to abaxial side of target gene silenced leaves (5^th to 8^th) as spots (about 1.5 cm diameters). Several nonhost pathogens can be simultaneously tested for their growth in the target gene silenced plants. Simultaneously inoculate the host pathogen as this can be used as a positive control for viewing in planta bacterial growth. Also inoculate vector control (TRV::00) plants.

3. Observation of in planta Growth of Bacterial Pathogens

1. Expose the inoculated leaves to a long wavelength UV light in the dark. Bacterial colonies can be viewed as green fluorescent dots in the abaxial side of the leaf in the background of red fluorescence emitted by leaf surface.
2. Observe pathogen growth from 2 days post inoculation (dpi) to 5 dpi. Everyday observation during this time interval is necessary.
3. After the first screen, short list the clones whose silencing results in growth of one or more nonhost pathogen(s).
4. Repeat VIGS for the selected clones and again test the response of gene silenced plants to nonhost pathogen(s). This second level of screening is done to remove the false positives obtained during the first screen.

4. Confirmation of Shortlisted Plants for Compromised Nonhost Resistance

1. Silence the cDNA clones selected from the screen as described above. Inoculate the whole plant with nonhost pathogen(s) by submerging the plants with respective pathogen cultures with 0.01% (v/v) Silwet L-77 and subjecting the submerged plants to vacuum for 3 - 5 min. Quantify the bacterial growth by conventional growth assay^6,18,19 as described below.
2. At 0 hr post inoculation (hpi), 3 dpi and 5 dpi, collect two leaf samples from five biological replicates for each nonhost pathogen(s) inoculated leaves using a leaf punch (0.5 cm²). Grind the leaf samples, serial dilute and plate the sap on KB agar medium supplemented with appropriate antibiotics and incubate at 28 °C for 2 days. Count the bacterial colonies using a colony counter and calculate the bacterial growth in the leaves as described in previous literature⁶.
3. Plants susceptible to nonhost pathogen(s) should show higher number of pathogen growth compared to vector control.

5. Sequencing the Insert and Identification of Target Gene

1. Perform colony PCR for the selected clone using attB1 and attB2 primers or using the primers flanking the cloning site in the TRV2 vector. Run the PCR product on the gel and check for amplification of the single band.
2. Plant gene insert in the TRV2 vector can be sequenced using attB primers or primers flanking the cloning site.
3. Perform BLAST using the sequence and identify the gene details.
4. Obtain full length gene sequence along with the un-translated regions (UTRs).
5. Select 300-400 bp fragments from three different regions of the sequence and clone them into TRV2 vector. Independently perform VIGS using all three VIGS constructs and confirm the compromise of nonhost resistance in all three gene silenced plants.

النتائج

Major aim of this study is to demonstrate a method for easy and accurate identification of gene silenced N. benthamiana plants that are compromised for nonhost resistance. There are four major steps in this methodology. First step is to individually silence large number of genes using TRV-VIGS. We had silenced about 5,000 genes^6,18 over a period of about 1.5 years using the protocol depicted in Figure 1. Some of the gene silenced plants showed various phenotypic alterations includin...

Discussion

Plant immunity limits the growth of nonhost pathogens and hence, little or no green fluorescence is emitted from vector control plant leaves inoculated with nonhost pathogen under long wavelength UV light (Figure 3D). However, when a gene involved in nonhost resistance is silenced, the gene silenced plants favor the growth of nonhost pathogen and green fluorescence is seen (Figure 3E). This is the basic principle involved in the method described in this manuscript. This methodology has...

Materials

Name	Company	Catalog Number	Comments
96-well U-bottom plates	Becton Dickinson Labware (Franklin Lakes, NJ, USA)	35-3077
96-pin replicator stainless steel	Nalge Nunc International (Naperville, IL, USA)	250520
High Intensity UV Inspection Lamps, Model B-100ap	Thomas scientific (Swedesboro, NJ, USA)	6283K50	Manufacturer ID 95-0127-01
Stuart SC6 colony counter	Bibby Scientific Limited, Staffordshire, UK	SC6PLUS
Soil-less potting mixture, Metro-Mix 350	SUNGRO Horticulture Distribution, Inc., (Bellevue, WA, USA)
Primers: attB1 (GGGGACAAGTTTGTACAAAAAAGCAGGCT) attB2 (GGGGACCACTTTGTACAAGAAAGCTGGGT)	Integrated DNA Technologies, Inc (Coralville, IA, USA)	Custom synthesized
MES, Monohydrate	VWR international (Radnor, PA, USA)	CAS No. 145224-94-8
Acetosyringone (Dimethoxy-4’-hydroxyacetophenone)	Sigma Aldrich (St. Louis, MO, USA)	D134406
Vac-In-Stuff (Silwet L-77)	Lehle Seeds (Round Rock, TX, USA)	VIS-30