Heterogeneous Removal of Water-Soluble Ruthenium Olefin Metathesis Catalyst from Aqueous Media Via Host-Guest Interaction

A highly efficient transition metal catalyst removal method is developed. The water-soluble catalyst contains a newly-designed NHC ligand for the catalyst ...

Florida State University

A new terpolymer adhesive, poly(2-methoxyethyl acrylate-co-N-methacryloyl 3,4-dihydroxyl-l-phenylalanine-co-heptaisobutyl substituted polyhedral oligomeric silsesquioxane propyl methacrylate) (poly(MEA-co-MDOPA-co-MPOSS) was synthesized by thermally initiated radical polymerization. In this study, we investigated the effect of the POSS component on adhesion, mechanical, and optical properties of the catechol-group containing bioinspired adhesives. The terpolymer contains the catechol group which is known to improve the adhesion properties of polymers. Only a very small amount of the POSS-containing monomer, MPOSS, was included, 0.5 mol %. In the presence of POSS, the synthesized poly(MEA-co-MDOPA-co-MPOSS) demonstrated strong adhesion properties, 23.2 ± 6.2 J/m with 0.05 N preloading and 300 s holding time, compared to many previously prepared catechol-containing adhesives. The mechanical properties (Young's modulus and stress at 10% strain) of the POSS-containing terpolymer showed significant increases (6-fold higher) over the control polymer, which does not contain POSS. Optical transmittance of the synthesized terpolymer was also improved significantly in the visible light range, 450-750 nm. Cell testing with human embryonic kidney cells (HEK293A) indicates that the new terpolymer is a promising candidate in biomedical adhesives without acute cytotoxicity. The synthesized poly(MEA-co-MDOPA-co-MPOSS) is the first example of POSS-containing pressure sensitive bioinspired adhesive for biomedical applications. The study of poly(MEA-co-MDOPA-co-MPOSS) demonstrated a convenient method to enhance two important properties, mechanical and optical properties, by the addition of a very small amount of POSS. Based on this study, it was found that POSS can be used to strengthen mechanical properties of bioinspired adhesive without the need for a covalent cross-linking step.

POSS-Containing Bioinspired Adhesives with Enhanced Mechanical and Optical Properties for Biomedical Applications.

A bioinspired, modular terpolymer adhesive, poly(N-methacryloyl-3,4-dihydroxyl-l-phenylalanine-co-9-(acryloyloxy)butyl anthracene-9-carboxylate-co-acrylic acid), has been synthesized containing three different functionalities: a photo-cross-linking segment, a wet interfacial adhesion segment, and a water-soluble segment. The synthesized adhesive polymer is the first example of a single-phase, photo-cross-linkable adhesive which does not require additional photoinitiator or other cross-linking agents. The terpolymer demonstrates strong adhesion when it swells in water and/or ethanol. The terpolymer is composed of three repeating units: N-methacryloyl-3,4-dihydroxyl-l-phenylalanine (MDOPA), which has been known to generate strong adhesion under wet conditions, poly(acrylic acid), which has been known to increase water solubility of polymers, and a photo-cross-linking segment consisting of an anthracene-based monomer used for enhancement of cohesion properties via UV irradiation (352 nm). A photomediated [4 + 4] cycloaddition reaction of anthracene results in the cross-linking of individual polymer chains after interfacial adhesion between substrates and adhesive polymers. Chemically, the covalent photo-cross-linking was confirmed by UV-vis, H NMR, and gel permeation chromatography (GPC). The cross-linking-fortified cohesion of the adhesive polymer network yields strengthened cohesion properties of the bulk material. The photoreaction was conveniently controlled via the duration of UV-irradiation. The adhesion properties of new adhesives were characterized by lap shear strength on transparent Mylar film and glasses after the adhesive was swollen in biologically friendly solvents including water and ethanol. The adhesion strength (J/m) was enhanced by 850% under 352 nm UV-irradiation. Multiple application variables were tested to determine the optimal conditions, such as solvent, concentration, polymer composition, and substrate. The best adhesion properties were obtained from a 1:1 weight ratio of polymer:solvent in water on a Mylar film surface. As a single-phase system, the synthesized terpolymer is very convenient to use, and its adhesion strength can be easily modified by UV light. Additionally, the terpolymer's high water compatibility makes it ideally suited for application in the biomedical field.

Single-Phase Photo-Cross-Linkable Bioinspired Adhesive for Precise Control of Adhesion Strength.

A highly removable N-heterocyclic carbene ligand for a transition-metal catalyst in aqueous media via host-guest interactions has been developed. Water-soluble adamantyl tethered ethylene glycol in the ligand leads a hydrophobic inclusion into the cavity of β-cyclodextrin. Ruthenium (Ru) olefin metathesis catalyst with this ligand demonstrated excellent performance in various metathesis reactions in water as well as in CHCl, and removal of residual Ru was performed via filtration utilizing a host-guest interaction and extraction.

Hoyong Chung

Department of Chemical and Biomedical Engineering

Florida State University

Heterogeneous Removal of Water-Soluble Ruthenium Olefin Metathesis Catalyst from Aqueous Media Via Host-Guest Interaction

Hoyong Chung

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Department of Chemical and Biomedical Engineering

Florida State University

Heterogeneous Removal of Water-Soluble Ruthenium Olefin Metathesis Catalyst from Aqueous Media Via Host-Guest Interaction

Department of Chemical and Biomedical Engineering