electroactive-polymer-nanoparticles-exhibiting-photothermal-properties

Electroactive Polymer Nanoparticles Exhibiting Photothermal Properties

A method for the synthesis of electroactive polymers is demonstrated, starting with the synthesis of extended conjugation monomers using a three-step ...

Texas State University

The lack of specificity of chemotherapeutic agents to cancer tissue commonly leads to dose-limiting side effects and poor therapeutic results. Drug delivery systems promise to improve the deficiencies of chemotherapeutic treatment by modifying the biodistribution and pharmacokinetics of the drug in vivo. Here, we report the preparation, characterization and in vitro evaluation of a carrier for the chemotherapeutic drug doxorubicin based on acid-capped poly(lactic-co-glycolic acid) nanoparticles.

Doxorubicin-loaded PLGA nanoparticles by nanoprecipitation: preparation, characterization and in vitro evaluation.

Micro- and nanofabrication techniques have revolutionized the pharmaceutical and medical fields as they offer the possibility for highly reproducible mass-fabrication of systems with complex geometries and functionalities, including novel drug delivery systems and bionsensors. The principal micro- and nanofabrication techniques are described, including photolithography, soft lithography, film deposition, etching, bonding, molecular self assembly, electrically induced nanopatterning, rapid prototyping, and electron, X-ray, colloidal monolayer, and focused ion beam lithography. Application of these techniques for the fabrication of drug delivery and biosensing systems including injectable, implantable, transdermal, and mucoadhesive devices is described.

Micro- and nanofabrication methods in nanotechnological medical and pharmaceutical devices.

Nanoparticle-based drug delivery systems are considered promising for the delivery of imaging agents and drugs for the detection and treatment of illnesses, including cancer. Investigation of nanoparticle interactions with the diseased cells can lead to better designs. In this work, poly(lactic-co-glycolic acid) nanoparticles loaded with rhodamine 6G were prepared by nanoprecipitation with high encapsulation efficiency. In vitro release studies demonstrated that rhodamine escaped from the nanoparticles at a very slow rate at physiological pH, thus making it ideal for imaging studies. At acidic pH this agent was released quickly, suggesting charge interactions between the polymer and rhodamine. Microscopy and flow cytometry studies show higher uptake in MDA-MB-231 breast cancer cells when exposed to rhodamine-loaded nanoparticles than to rhodamine in solution.

Rhodamine-loaded poly(lactic-co-glycolic acid) nanoparticles for investigation of in vitro interactions with breast cancer cells.

The objective of this review is to outline current major cancer targets for nanoparticle systems and give insight into the direction of the field. The major targeting strategies that have been used for the delivery of therapeutic or imaging agents to cancer have been broken into three sections. These sections are angiogenesis-associated targeting, targeting to uncontrolled cell proliferation markers, and tumor cell targeting. The targeting schemes explored for many of the reported nanoparticle systems suggest the great potential of targeted delivery to revolutionize cancer treatment.

Active targeting schemes for nanoparticle systems in cancer therapeutics.

This work evaluates various techniques for the incorporation of poly(ethylene glycol) (PEG) onto biodegradable nanoparticles (NPs) of poly(lactic-co-glycolic acid) (PLGA) or poly(lactic acid) (PLA) with the purpose of providing a functional site for surface conjugation of targeting agents and for improving surface properties. The techniques compared were based on NP preparation with blends of PLGA and poloxamer or with block copolymers of PLGA/PLA with PEG. Blending of PLGA with poloxamer 407 resulted in the incorporation of the latter to up to a 43 wt % content. Direct conjugation of heterofunctional NH2-PEG-COOH to the surface of premade NPs was not highly effective. Preparation of copolymers of PLGA with PEG was determined to be more effective and versatile by polymerization of lactide and glycolide dimers onto the hydroxyl group of heterofunctional OH-PEG-COOH than by conjugation of the premade polymers with carbodiimide chemistry. NPs prepared with these copolymers confirmed the surface localization of PEG and proved to be useful for conjugation of mouse immumoglobulin as a model targeting agent.

PEGylation strategies for active targeting of PLA/PLGA nanoparticles.

Effective oral delivery of proteins is impeded by steep pH gradients and proteolytic enzymes in the gastrointestinal tract, as well as low absorption of the proteins into the bloodstream because of their size, charge, or solubility. In this work, pH-responsive complexation hydrogels of poly(itaconic acid) (PIA) with poly(ethylene glycol) (PEG) grafts were synthesized for applications in oral drug delivery. These hydrogels were expected to be in collapsed configuration at low pH because of hydrogen bonding between PIA carboxyl groups and PEG, and to swell with increasing pH because of charge repulsion between deprotonated carboxylic acid groups. Hydrogels were prepared by UV-initiated free radical polymerization using tetraethylene glycol as the crosslinking agent and Irgacure 2959 as the initiator. The effect of monomer ratios, crosslinking ratio, and solvent amount on the properties of the hydrogels were investigated. The composition of the hydrogels was confirmed by Fourier transform infrared spectroscopy. Equilibrium swelling studies in the pH range of 1.2-7 revealed that the extent of swelling increased with increasing pH up to a pH of about 6, when no further carboxylic acid deprotonation occurred. Studies in Caco-2 colorectal carcinoma cells confirmed the cytocompatibility of these materials at concentrations of up to 5 mg/mL.

Characterization of pH-responsive hydrogels of poly(itaconic acid-g-ethylene glycol) prepared by UV-initiated free radical polymerization as biomaterials for oral delivery of bioactive agents.

We developed synthetic chemistry to access the marine alkaloid rigidins and over 40 synthetic analogues based on the 7-deazaxanthine, 7-deazaadenine, 7-deazapurine, and 7-deazahypoxanthine skeletons. Analogues based on the 7-deazahypoxanthine skeleton exhibited nanomolar potencies against cell lines representing cancers with dismal prognoses, tumor metastases, and multidrug resistant cells. Studies aimed at elucidating the mode(s) of action of the 7-deazahypoxanthines in cancer cells revealed that they inhibited in vitro tubulin polymerization and disorganized microtubules in live HeLa cells. Experiments evaluating the effects of the 7-deazahypoxanthines on the binding of [(3)H]colchicine to tubulin identified the colchicine site on tubulin as the most likely target for these compounds in cancer cells. Because many microtubule-targeting compounds are successfully used to fight cancer in the clinic, we believe the new chemical class of antitubulin agents represented by the 7-deazahypoxanthine rigidin analogues have significant potential as new anticancer agents.

Exploring natural product chemistry and biology with multicomponent reactions. 5. Discovery of a novel tubulin-targeting scaffold derived from the rigidin family of marine alkaloids.

Nanotechnology offers the possibility of creating multi-functional structures that can provide solutions for biomedical problems. The nanoprobes herein described are an example of such structures, where nano-scaled particles have been designed to provide high specificity and contrast potential for optical detection of cancer. Specifically, enzymatically activated fluorescent nanoprobes (EANPs) were synthesized as cancer-specific contrast agents for optical imaging.

Enzymatically activated near infrared nanoprobes based on amphiphilic block copolymers for optical detection of cancer.

Significant research has focused on investigating the potential of hydrogels in various applications and, in particular, in medicine. Specifically, hydrogels that are biodegradable lend promise to many therapeutic and biosensing applications. Endonucleases are critical for mechanisms of DNA repair. However, they are also known to be overexpressed in cancer and to be present in wounds with bacterial contamination. In this work, we set out to demonstrate the preparation of DNA-enabled hydrogels that could be degraded by nucleases. Specifically, hydrogels were prepared through the reaction of dibenzocyclooctyne-functionalized multi-arm poly(ethylene glycol) with azide-functionalized single-stranded DNA in aqueous solutions via copper-free click chemistry. Through the use of this method, biodegradable hydrogels were formed at room temperature in buffered saline solutions that mimic physiological conditions, avoiding possible harmful effects associated with other polymerization techniques that can be detrimental to cells or other bioactive molecules. The degradation of these DNA-cross-linked hydrogels upon exposure to the model endonucleases Benzonase(®) and DNase I was studied. In addition, the ability of the hydrogels to act as depots for encapsulation and nuclease-controlled release of a model protein was demonstrated. This model has the potential to be tailored and expanded upon for use in a variety of applications where mild hydrogel preparation techniques and controlled material degradation are necessary including in drug delivery and wound healing systems.

Biodegradable DNA-enabled poly(ethylene glycol) hydrogels prepared by copper-free click chemistry.

Docking studies of tubulin-targeting C2-substituted 7-deazahypoxanthine analogues of marine alkaloid rigidins led to the design and synthesis of compounds containing linear C2-substituents. The C2-alkynyl analogue was found to have double- to single-digit nanomolar antiproliferative IC50 values and showed statistically significant tumor size reduction in a colon cancer mouse model at nontoxic concentrations. These results provide impetus and further guidance for the development of these rigidin analogues as anticancer agents.

Novel Microtubule-Targeting 7-Deazahypoxanthines Derived from Marine Alkaloid Rigidins with Potent in Vitro and in Vivo Anticancer Activities.

Chlorine and fluorine substituted hydroxyapatites (HA-Cl-F) with different degrees of ion replacement were successfully prepared by the one step mechanochemical activation method. X-ray diffraction (XRD) and FT-IR spectra indicated that substitution of these anions in milled powders resulted in the formation of pure hydroxyapatite phase except for the small observed change in the lattice parameters and unit cell volumes of the resultant hydroxyapatite. Microscopic observations showed that the milled product had a cluster-like structure made up of polygonal and spherical particles with an average particle size of approximately ranged from 20±5 to 70±5nm. The zeta potential of milled samples was performed at three different pH (5, 7.4, and 9). The obtained zeta potential values were negative for all three pH values. Negative zeta potential was described to favor osseointegration, apatite nucleation, and bone regeneration. The bioactivity of samples was investigated on sintered pellets soaked in simulated body fluid (SBF) solution and apatite crystals formed on the surface of the pellets after being incubated for 14days. Zeta potential analysis and bioactivity experiment suggested that HA-Cl-F will lead to the formation of new apatite particles and therefore be a potential implant material.

Tania Betancourt

Materials Science,
Engineering,
and Commercialization Program,
Department of Chemistry and Biochemistry,
Materials Science, Engineering, and Commercialization Program

Texas State University

Electroactive Polymer Nanoparticles Exhibiting Photothermal Properties

Tania Betancourt

.css-o250i3{font-size:18px;font-family:Open Sans,sans-serif;line-height:21.6px;}Materials Science,Engineering,and Commercialization Program,Department of Chemistry and Biochemistry,Materials Science, Engineering, and Commercialization Program

Texas State University

Electroactive Polymer Nanoparticles Exhibiting Photothermal Properties

Materials Science,
Engineering,
and Commercialization Program,
Department of Chemistry and Biochemistry,
Materials Science, Engineering, and Commercialization Program