Name: atom probe tomography studies on the cu(in,ga)se2 grain boundaries
Uploaded: 2013-04-22T12:00:00
Description: Watch this Scientific Journal Video about Atom Probe Tomography Studies on the CuIn,GaSe2 Grain Boundaries at JoVE.com

This work is founded by the German Research Foundation (DFG) (Contract CH 943/2-1). The authors would like to thank Wolfgang Dittus, and Stefan Paetel from Zentrum f&uuml;r Sonnenenergie- und Wasserstoff-Forschung Baden-W&uuml;rttemberg for preparing the CIGS absorber layer for this work.

1. CIGS Layer Deposition
<ol>
 <li>Sputter-deposit 500 nm of molybdenum (back contact layer) onto a 3 mm thick soda lime glass substrate (SLG).</li>
 <li>Co-evaporate 2 &mu;m of CIGS in an inline multistage CIGS process 24. The obtained CIGS layer deposited on Mo back contact is shown in Figure 1.</li>
 <li>Measure the integral composition of CIGS layer by X-ray fluorescence spectrometry (XRF). The obtained CIGS composition is shown in Table 1.</li>
</ol>
<p class="jove_titl...

<ol>
	<li>Stanbery, B. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Copper+indium+selenides+and+related+materials+for+photovoltaic+devices.">Copper indium selenides and related materials for photovoltaic devices.</a> Crit. Rev. Solid State. 27, 73-117 (2002).</li><li>Kemell, M., Ritala, M., Leskel&#228;, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thin+film+deposition+methods+for+CuInSe2+solar+cells.">Thin film deposition methods for CuInSe2 solar cells.</a> Crit. Rev. Solid State. 30, 1-31 (2005).</li><li>Kazmerski, L. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Solar+photovoltaics+R&amp;D+at+the+tipping+point:+a+2005+technology+overview.">Solar photovoltaics R&amp;D at the tipping point: a 2005 technology overview.</a> J. Electron Spectrosc. 150 (2-3), 105-135 (2006).</li><li>Sadewasser, S., Glatzel, T., Schuler, S., Nishiwaki, S., Kaigawa, R., Lux-Steiner, M. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Kelvin+probe+force+microscopy+for+the+nano+scale+characterization+of+chalcopyrite+solar+cell+materials+and+devices.">Kelvin probe force microscopy for the nano scale characterization of chalcopyrite solar cell materials and devices.</a> Thin Solid Films. 431-432, 257-261 (2003).</li><li>Jiang, C. S., Noufi, R., AbuShama, J. A., Ramanathan, K., Moutinho, H. R., Pankow, J., Al-Jassim, M. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Local+built-in+potential+on+grain+boundary+of+Cu(In,Ga)Se2+thin-films.">Local built-in potential on grain boundary of Cu(In,Ga)Se2 thin-films.</a> Appl. Phys. Lett. 84, 3477-1-3477-3 (2004).</li><li>Abou-Ras, D., Koch, C. T., K&#252;stner, V., van Aken, P. A., Jahn, U., Contreras, M. A., Caballero, R., Kaufmann, C. A., Scheer, R., Unold, T., Schock, H. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Grain-boundary+types+in+chalcopyrite-type+thin+films+and+their+correlations+with+film+texture+and+electrical+properties.">Grain-boundary types in chalcopyrite-type thin films and their correlations with film texture and electrical properties.</a> Thin Solid Films. 517, 2545-2549 (2009).</li><li>Nichterwitz, M., Abou-Ras, D., Sakurai, K., Bundesmann, J., Unold, T., Scheer, R., Schock, H. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Influence+of+grain+boundaries+on+current+collection+in+Cu(In,Ga)Se2+thin-film+solar+cells.">Influence of grain boundaries on current collection in Cu(In,Ga)Se2 thin-film solar cells.</a> Thin Solid Films. 517, 2554-2557 (2009).</li><li>Abou-Ras, D., Schorr, S., Schock, H. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Grain+sizes+and+grain+boundaries+in+chalcopyrite-type+thin+films.">Grain sizes and grain boundaries in chalcopyrite-type thin films.</a> J. Appl. Cryst. 40, 841-848 (2007).</li><li>Niles, D. W., Al-Jassim, M., Ramanathan, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+observation+of+Na+and+O+impurities+at+grain+surfaces+of+CuInSe2+thin+films.">Direct observation of Na and O impurities at grain surfaces of CuInSe2 thin films.</a> J. Vac. Sci. Technol. A. 17, 291-296 (1998).</li><li>Rockett, A., Granath, K., Asher, S., Al Jassim, M. M., Hasoon, F., Matson, R., Basol, B., Kapur, V., Britt, J. S., Gillespie, T., Marshall, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Na+incorporation+in+Mo+and+CuInSe2+from+production+processes.">Na incorporation in Mo and CuInSe2 from production processes.</a> Sol. Energy. 59, 255-264 (1999).</li><li>Heske, C., Eich, D., Fink, R., Umbach, E., Kakar, S., van Buuren, T., Bostedt, C., Terminello, L. J., Grush, M. M., Callcott, T. A., Himpsel, F. J., Ederer, D. L., Perera, R. C. C., Riedl, W., Karg, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Localization+of+Na+impurities+at+the+buried+CdS/Cu(In,+Ga)Se2+heterojunction.">Localization of Na impurities at the buried CdS/Cu(In, Ga)Se2 heterojunction.</a> Appl. Phys. Lett. 75, 2082-2084 (1999).</li><li>Braunger, D., Hariskos, D., Bilger, G., Rau, U., Schock, H. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Influence+of+Na+on+the+growth+of+polycrystalline+Cu(In,Ga)Se2+thin+films.">Influence of Na on the growth of polycrystalline Cu(In,Ga)Se2 thin films.</a> Thin Solid Films. 361, 161-166 (2000).</li><li>Cerezo, A., Godfrey, T. J., Sijbrandij, S. J., Smith, G. D. W., Warren, P. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Performance+of+an+energy-compensated+three-dimensional+atom+probe.">Performance of an energy-compensated three-dimensional atom probe.</a> Rev. Sci. Instrum. 69, 49-58 .</li><li>Blavette, D., Bostel, A., Sarrau, J. M., Deconihout, B., Menand, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+atom-probe+for+three+dimensional+tomography.">An atom-probe for three dimensional tomography.</a> Nature. 363, 432-435 (1993).</li><li>Gault, B., Vurpillot, F., Vella, A., Gilbert, M., Menand, A., Blavette, D., Deconihout, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design+of+a+femtosecond+laser+assisted+tomographic+atom+probe.">Design of a femtosecond laser assisted tomographic atom probe.</a> Rev. Sci. Instrum. 77, 043705-1-043705-8 (2006).</li><li>Kelly, T. F., Miller, M. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Atom+probe+tomography.">Atom probe tomography.</a> Rev. Sci. Instrum. 78, 031101-1-031101-20 (2007).</li><li>Thompson, K., Lawrence, D., Larson, D. J., Olson, J. D., Kelly, T. F., Gorman, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+situ+site-specific+specimen+preparation+for+atom+probe+tomography.">In situ site-specific specimen preparation for atom probe tomography.</a> Ultramicroscopy. 107 (2-3), 131-139 (2007).</li><li>Cadel, E., Barreau, N., Kessler, J., Pareige, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Atom+probe+study+of+sodium+distribution+in+polycristalline+Cu(In,Ga)Se2+thin+film.">Atom probe study of sodium distribution in polycristalline Cu(In,Ga)Se2 thin film.</a> Acta Material. 58, 2634-2637 (2010).</li><li>Schlesiger, R., Oberdorfer, C., W&#252;rz, R., Greiwe, G., Stender, P., Artmeier, M., Pelka, P., Spaleck, F., Schmitz, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design+of+a+laser-assisted+tomographic+atom+probe+at+M&#252;nster+University.">Design of a laser-assisted tomographic atom probe at M&#252;nster University.</a> Rev. Sci. Instr. 81, 043703 (2010).</li><li>Cojocaru-Mir&#233;din, O., Choi, P., Abou-Ras, D., Schmidt, S. S., Caballero, R., Raabe, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterization+of+grain+boundaries+in+Cu(In,Ga)Se2+films+using+atom-probe+tomography.">Characterization of grain boundaries in Cu(In,Ga)Se2 films using atom-probe tomography.</a> IEEE J. Photovolt. 1 (2), 207-212 (2011).</li><li>Cojocaru-Mir&#233;din, O., Choi, P., Wuerz, R., Raabe, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Atomic-scale+characterization+of+the+CdS/CuInSe2+interface+in+thin-film+solar+cells.">Atomic-scale characterization of the CdS/CuInSe2 interface in thin-film solar cells.</a> Appl. Phys. Lett. 98, 103504-1-103504-3 (2011).</li><li>Couzinie-Devy, F., Cadel, E., Barreau, N., Arzel, L., Pareige, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Atom+probe+study+of+Cu-poor+to+Cu-rich+transition+during+Cu(In,Ga)Se2+growth.">Atom probe study of Cu-poor to Cu-rich transition during Cu(In,Ga)Se2 growth.</a> Appl. Phys. Lett. 99, 232108-1-232108-3 (2011).</li><li>Voorwinden, G., Jackson, P., Kniese, R., Powalla, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In-line+Cu(In,Ga)Se2+co-evaporation+process+on+30+cm+x+30+cm+substrates+with+multiple+deposition+stages.">In-line Cu(In,Ga)Se2 co-evaporation process on 30 cm x 30 cm substrates with multiple deposition stages.</a> , 2115-2118 (2007).</li><li>Miller, M. K., Russell, K. F., Thompson, K., Alvis, R., Larson, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Review+of+atom+probe+FIB-based+specimen+preparation+methods.">Review of atom probe FIB-based specimen preparation methods.</a> Microscopy Microanal. 13 (6), 428-436 (2007).</li><li>J, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Modeling+image+distortions+in+3DAP.">Modeling image distortions in 3DAP.</a> Microscopy and Microanalysis. 10 (3), 384-390 (2008).</li><li>Kellog, G. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Determining+the+field+emitter+temperature+during+laser+irradiation+in+the+pulsed+laser+atom+probe.">Determining the field emitter temperature during laser irradiation in the pulsed laser atom probe.</a> J. Appl. Phys. 52, 5320 (1981).</li><li>. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> IVASTM 3.6.2 User Guide 2012. , (2012).</li><li>Persson, C., Zunger, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Compositionally+induced+valence-band+offset+at+the+grain+boundary+of+polycrystalline+chalcopyrites+creates+a+hole+barrier.">Compositionally induced valence-band offset at the grain boundary of polycrystalline chalcopyrites creates a hole barrier.</a> Appl. Phys. Lett. 87, 211904-1-211904-3 (2005).</li><li>Zhang, S. B., Wei, S. -. H., Zunger, A., Katayama-Yoshida, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Defect+physics+of+the+CuInSe2+chalcopyrite+semiconductor.">Defect physics of the CuInSe2 chalcopyrite semiconductor.</a> Phys. Rev. B. 57, 9642-9656 (1998).</li><li>Cahn, J. W., Johnson, W. C., Blakely, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Interfacial Segregation. , 3-23 (1979).</li><li>Miller, M. K., Jayaram, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Some+factors+affecting+analysis+in+atom+probe.">Some factors affecting analysis in atom probe.</a> Surf. Sci. 266, 458-462 (1992).</li><li>Wuerz, R., Eicke, A., Kessler, F., Paetel, S., Efimenko, S., Schlegel, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=CIGS+thin-film+solar+cells+and+modules+on+enamelled+steel+substrates.">CIGS thin-film solar cells and modules on enamelled steel substrates.</a> Sol. Energy. 100, 132-137 (2012).</li><li>De Geuser, F., Lefebvre, W., Danoix, F., Vurpillot, F., Forbord, B., Blavette, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+improved+reconstruction+procedure+for+the+correction+of+local+magnification+effects+in+three-dimensional+atom-probe.">An improved reconstruction procedure for the correction of local magnification effects in three-dimensional atom-probe.</a> Surf. Interf. Anal. 39, 268-272 (2007).</li><li>Kingham, D. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+post-ionization+of+field+evaporated+ions:+A+theoretical+explanation+of+multiple+charge+states.">The post-ionization of field evaporated ions: A theoretical explanation of multiple charge states.</a> Surf. Sci. 116, 273-301 (1982).</li><li>Letellier, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Etude des joints de grains et interphases dans les superalliages Astroloy par microscopie electronique et tomographie atomique [dissertation]. , (1994).</li><li>Hoummada, I., Mangelinck, K., Chow, D., Lee, J., Bernardini, <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Original+methods+for+diffusion+measurements+in+polycrystalline+thin-films.">Original methods for diffusion measurements in polycrystalline thin-films.</a> Defect and Diffusion Forum. 322, 129-150 (2012).</li></ol>

In the current work, we have presented APT results on a random HAGB in CIGS, a compound semiconductor material used for photovoltaic application. Furthermore, we have also shown that APT in conjunction with complementary techniques, such as EBSD and TEM, is a powerful tool to elucidate the structure-composition properties relationship for the CIGS solar cells. Unfortunately, the correlation between APT and EDX/EELS in TEM was not possible because firstly, EDX/EELS has not sufficient resolution to detect low Na and O conc...

Thin-film solar cells based on the chalcopyrite-structured compound semiconductor Cu(In,Ga)Se2 (CIGS) as the absorber material have been under development for more than two decades because of their high efficiency, radiation hardness, long-term stable performance, and low production costs 1-3. These solar cells can be fabricated with only little material consumption due to the favorable optical properties of the CIGS absorber layer, namely, a direct bandgap and a high absorption coefficient 1,2. Absorber films of only a few micrometers in thickness are sufficient to generate a high photocurrent. Since the diffusion paths of photogenerated charge carriers to the electrodes are relatively short, CIGS absorbers can be produced in polycrystalline form. The maximum efficiency of a Cu(In,Ga)Se2 (CIGS) solar cell achieved so far is 20.4% 4, which is the highest value among all thin-film solar cells.
To further establish the CIGS thin-film photovoltaic technology, both the reduction of production costs and the enhancement of solar cell efficiency are essential. The latter is strongly dependent on the microstructure and chemical composition of the CIGS absorber layer. Internal interfaces, in particular grain boundaries (GBs) within the absorber, play a pivotal role, as they can affect the transport of photogenerated charge carriers.
One of the main unresolved issues with respect to CIGS solar cells is the benign nature of CIGS GBs, i.e. polycrystalline CIGS absorber films yield outstanding cell efficiencies despite a high density of GBs and lattice defects.
Several authors studied GBs in solar-grade CIGS films with respect to their electrical properties 5,6, character and misorientation 7-9 as well as impurity segregation 10-13. However, no clear link between these properties could be established so far. In particular, there is a substantial lack of information regarding the local chemical composition and impurity content of the GBs.
In the past two decades, Atom Probe Tomography (APT) has emerged as one of the promising nano-analytical techniques 14-17. Until recently APT studies of solar cells have been largely restricted by difficulties in the sample preparation process and the limited capability of analyzing semiconductor materials using conventional pulsed-voltage atom probes. These restrictions have been largely overcome by the development of the 'lift-out method' based on focused ion beam (FIB) milling 18 and the introduction of pulsed laser APT 16. Several papers about APT characterization of CIGS solar cells have been published 19-23, which are strongly encouraging for further investigations.
This paper gives a guideline of how to study internal interfaces in CIGS thin-film solar cells by the atom probe tomography technique.

atom probe tomography studies on the cu(in,ga)se2 grain boundaries

Compared with the existent techniques, atom probe tomography is a unique technique able to chemically characterize the internal interfaces at the nanoscale and in three dimensions. Indeed, APT possesses high sensitivity (in the order of ppm) and high spatial resolution (sub nm).
Considerable efforts were done here to prepare an APT tip which contains the desired grain boundary with a known structure. Indeed, site-specific sample preparation using combined focused-ion-beam, electron backscatter diffraction, and transmission electron microscopy is presented in this work. This method allows selected grain boundaries with a known structure and location in Cu(In,Ga)Se2 thin-films to be studied by atom probe tomography.
Finally, we discuss the advantages and drawbacks of using the atom probe tomography technique to study the grain boundaries in Cu(In,Ga)Se2 thin-film solar cells.

Figure 3 shows a side view (x-z slice) elemental map of the random high-angle GB (HAGB) 28.5&deg;-&lt;511&gt;cub selected in Figure 2 by site-specific preparation method. Co-segregation of Na, K, and O at a CIGS HAGB is directly mapped using APT. These impurities most likely diffused out of the SLG substrate into the absorber layer during the deposition of the CIGS layer at ~ 600 &deg;C.
Figure 4a shows the Cu, In, Ga, and Se concen...

Watch this Scientific Journal Video about Atom Probe Tomography Studies on the CuIn,GaSe2 Grain Boundaries at JoVE.com

Atom Probe Tomography Studies on the CuIn,GaSe2 Grain Boundaries

In this work, we describe the use of the atom-probe tomography technique for studying the grain boundaries of the absorber layer in a CIGS solar cell. A novel approach to prepare the atom probe tips containing the desired grain boundary with a known structure is also presented here.

Atom Probe Tomography Studies on the Cu(In,Ga)Se2 Grain Boundaries

Compared with the existent techniques, atom probe tomography is a unique technique able to chemically characterize the internal interfaces at the ...

atom-probe-tomography-studies-on-the-cuingase2-grain-boundaries

Research

JoVE Journal

Engineering

Scanning-probe Single-electron Capacitance Spectroscopy

The integration of low-temperature scanning-probe techniques and single-electron capacitance spectroscopy represents a powerful tool to study the electronic quantum structure of small systems - including individual atomic dopants in semiconductors. Here we present a capacitance-based method, known as Subsurface Charge Accumulation (SCA) imaging, which is capable of resolving single-electron charging while achieving sufficient spatial resolution to image individual atomic dopants. The use of a capacitance technique enables observation of subsurface features, such as dopants buried many nanometers beneath the surface of a semiconductor material1,2,3. In principle, this technique can be applied to any system to resolve electron motion below an insulating surface.
As in other electric-field-sensitive scanned-probe techniques4, the lateral spatial resolution of the measurement depends in part on the radius of curvature of the probe tip. Using tips with a small radius of curvature can enable spatial resolution of a few tens of nanometers. This fine spatial resolution allows investigations of small numbers (down to one) of subsurface dopants1,2. The charge resolution depends greatly on the sensitivity of the charge detection circuitry; using high electron mobility transistors (HEMT) in such circuits at cryogenic temperatures enables a sensitivity of approximately 0.01 electrons/Hz&frac12; at 0.3 K 5.

Scanning-probe single-electron capacitance spectroscopy facilitates the study of single-electron motion in localized subsurface regions. A sensitive charge-detection circuit is incorporated into a cryogenic scanning probe microscope to investigate small systems of dopant atoms beneath the surface of semiconductor samples.

The integration of low-temperature scanning-probe techniques and single-electron capacitance spectroscopy represents a powerful tool to study the ...

Experiments on Ultrasonic Lubrication Using a Piezoelectrically-assisted Tribometer and Optical Profilometer

Friction and wear are detrimental to engineered systems. Ultrasonic lubrication is achieved when the interface between two sliding surfaces is vibrated at a frequency above the acoustic range (20 kHz). As a solid-state technology, ultrasonic lubrication can be used where conventional lubricants are unfeasible or undesirable. Further, ultrasonic lubrication allows for electrical modulation of the effective friction coefficient between two sliding surfaces. This property enables adaptive systems that modify their frictional state and associated dynamic response as the operating conditions change. Surface wear can also be reduced through ultrasonic lubrication. We developed a protocol to investigate the dependence of friction force reduction and wear reduction on the linear sliding velocity between ultrasonically lubricated surfaces. A pin-on-disc tribometer was built which differs from commercial units in that a piezoelectric stack is used to vibrate the pin at 22 kHz normal to the rotating disc surface. Friction and wear metrics including effective friction force, volume loss, and surface roughness are measured without and with ultrasonic vibrations at a constant pressure of 1 to 4 MPa and three different sliding velocities: 20.3, 40.6, and 87 mm/sec. An optical profilometer is utilized to characterize the wear surfaces. The effective friction force is reduced by 62% at 20.3 mm/sec. Consistently with existing theories for ultrasonic lubrication, the percent reduction in friction force diminishes with increasing speed, down to 29% friction force reduction at 87 mm/sec. Wear reduction remains essentially constant (49%) at the three speeds considered.

We present a protocol for using a piezoelectrically-assisted tribometer and optical profilometer to investigate the dependence of ultrasonic wear and friction reduction on linear velocity, contact pressure, and surface properties.

Friction and wear are detrimental to engineered systems. Ultrasonic lubrication is achieved when the interface between two sliding surfaces is vibrated at ...

The Measurement of Unsteady Surface Pressure Using a Remote Microphone Probe

Microphones are widely applied to measure pressure fluctuations at the walls of solid bodies immersed in turbulent flows. Turbulent motions with various characteristic length scales can result in pressure fluctuations over a wide frequency range. This property of turbulence requires sensing devices to have sufficient sensitivity over a wide range of frequencies. Furthermore, the small characteristic length scales of turbulent structures require small sensing areas and the ability to place the sensors in very close proximity to each other. The complex geometries of the solid bodies, often including large surface curvatures or discontinuities, require the probe to have the ability to be set up in very limited spaces. The development of a remote microphone probe, which is inexpensive, consistent, and repeatable, is described in the present communication. It allows for the measurement of pressure fluctuations with high spatial resolution and dynamic response over a wide range of frequencies. The probe is small enough to be placed within the interior of typical wind tunnel models. The remote microphone probe includes a small, rigid, and hollow tube that penetrates the model surface to form the sensing area. This tube is connected to a standard microphone, at some distance away from the surface, using a "T" junction. An experimental method is introduced to determine the dynamic response of the remote microphone probe. In addition, an analytical method for determining the dynamic response is described. The analytical method can be applied in the design stage to determine the dimensions and properties of the RMP components.

Here, we present a protocol to measure, with high spatial resolution, the unsteady surface pressure in turbulent flows. This method demonstrates the construction of a remote microphone probe (RMP) and the determination of its frequency-dependent, complex transfer function. An analytical determination of the dynamic response is presented and validated.

Microphones are widely applied to measure pressure fluctuations at the walls of solid bodies immersed in turbulent flows. Turbulent motions with various ...

Probing C84-embedded Si Substrate Using Scanning Probe Microscopy and Molecular Dynamics

This paper reports an array-designed C84-embedded Si substrate fabricated using a controlled self-assembly method in an ultra-high vacuum chamber. The characteristics of the C84-embedded Si surface, such as atomic resolution topography, local electronic density of states, band gap energy, field emission properties, nanomechanical stiffness, and surface magnetism, were examined using a variety of surface analysis techniques under ultra, high vacuum (UHV) conditions as well as in an atmospheric system. Experimental results demonstrate the high uniformity of the C84-embedded Si surface fabricated using a controlled self-assembly nanotechnology mechanism, represents an important development in the application of field emission display (FED), optoelectronic device fabrication, MEMS cutting tools, and in efforts to find a suitable replacement for carbide semiconductors. Molecular dynamics (MD) method with semi-empirical potential can be used to study the nanoindentation of C84-embedded Si substrate. A detailed description for performing MD simulation is presented here. Details for a comprehensive study on mechanical analysis of MD simulation such as indentation force, Young&#39;s modulus, surface stiffness, atomic stress, and atomic strain are included. The atomic stress and von-Mises strain distributions of the indentation model can be calculated to monitor deformation mechanism with time evaluation in atomistic level.

Probing C84-embedded Si Substrate Using Scanning Probe Microscopy and Molecular Dynamics

This paper reports the nanomaterial fabrication of a fullerene Si substrate inspected and verified by nanomeasurements and molecular dynamic simulation.

This paper reports an array-designed C84-embedded Si substrate fabricated using a controlled self-assembly method in an ultra-high vacuum chamber. The ...

Microfluidic Imaging Flow Cytometry by Asymmetric-detection Time-stretch Optical Microscopy (ATOM)

Scaling the number of measurable parameters, which allows for multidimensional data analysis and thus higher-confidence statistical results, has been the main trend in the advanced development of flow cytometry. Notably, adding high-resolution imaging capabilities allows for the complex morphological analysis of cellular/sub-cellular structures. This is not possible with standard flow cytometers. However, it is valuable for advancing our knowledge of cellular functions and can benefit life science research, clinical diagnostics, and environmental monitoring. Incorporating imaging capabilities into flow cytometry compromises the assay throughput, primarily due to the limitations on speed and sensitivity in the camera technologies. To overcome this speed or throughput challenge facing imaging flow cytometry while preserving the image quality, asymmetric-detection time-stretch optical microscopy (ATOM) has been demonstrated to enable high-contrast, single-cell imaging with sub-cellular resolution, at an imaging throughput as high as 100,000 cells/s. Based on the imaging concept of conventional time-stretch imaging, which relies on all-optical image encoding and retrieval through the use of ultrafast broadband laser pulses, ATOM further advances imaging performance by enhancing the image contrast of unlabeled/unstained cells. This is achieved by accessing the phase-gradient information of the cells, which is spectrally encoded into single-shot broadband pulses. Hence, ATOM is particularly advantageous in high-throughput measurements of single-cell morphology and texture &#8211; information indicative of cell types, states, and even functions. Ultimately, this could become a powerful imaging flow cytometry platform for the biophysical phenotyping of cells, complementing the current state-of-the-art biochemical-marker-based cellular assay. This work describes a protocol to establish the key modules of an ATOM system (from optical frontend to data processing and visualization backend), as well as the workflow of imaging flow cytometry based on ATOM, using human cells and micro-algae as the examples.

Microfluidic Imaging Flow Cytometry by Asymmetric-detection Time-stretch Optical Microscopy ATOM

This protocol describes the implementation of an asymmetric-detection time-stretch optical microscopy system for single-cell imaging in ultrafast microfluidic flow and its applications in imaging flow cytometry.

Scaling the number of measurable parameters, which allows for multidimensional data analysis and thus higher-confidence statistical results, has been the ...

In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for Cu(In,Ga)Se2 Solar Cells

The levelized cost of electricity (LCOE) of photovoltaic (PV) systems is determined by, among other factors, the PV module reliability. Better prediction of degradation mechanisms and prevention of module field failure can consequently decrease investment risks as well as increase the electricity yield. An improved knowledge level can for these reasons significantly decrease the total costs of PV electricity. 
In order to better understand and minimize the degradation of PV modules, the occurring degradation mechanisms and conditions should be identified. This should preferably happen under combined stresses, since modules in the field are also simultaneously exposed to multiple stress factors. Therefore, two 'Combined Stress test with in situ measurement' setups have been designed and constructed. These setups allow the simultaneous use of humidity, temperature, illumination, and electrical biases as independently controlled stress factors on solar cells and minimodules. The setups also allow real-time monitoring of the electrical properties of these samples. This protocol presents these setups and describes the experimental possibilities. Moreover, results obtained with these setups are also presented: various examples about the influence of both deposition and degradation conditions on the stability of thin film Cu(In,Ga)Se2 (CIGS) as well as Cu2ZnSnSe4 (CZTS) solar cells are described. Results on the temperature dependency of CIGS solar cells are also presented.

In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for CuIn,GaSe2 Solar Cells

Two &#39;Combined Stress test with in situ measurement&#39; setups, which allow real-time monitoring of accelerated degradation of solar cells and modules, were designed and constructed. These setups allow the simultaneous use of humidity, temperature, electrical biases, and illumination as independently controlled stress factors. The setups and various experiments executed are presented.

The levelized cost of electricity (LCOE) of photovoltaic (PV) systems is determined by, among other factors, the PV module reliability. Better prediction ...

Fabrication of Magnetic Nanostructures on Silicon Nitride Membranes for Magnetic Vortex Studies Using Transmission Microscopy Techniques

Electron and x-ray magnetic microscopies allow for high-resolution magnetic imaging down to tens of nanometers. However, the samples need to be prepared on transparent membranes which are very fragile and difficult to manipulate. We present processes for the fabrication of samples with magnetic micro- and nanostructures with spin configurations forming magnetic vortices suitable for Lorentz transmission electron microscopy and magnetic transmission x-ray microscopy studies. The samples are prepared on silicon nitride membranes and the fabrication consists of a spin coating, UV and electron-beam lithography, the chemical development of the resist, and the evaporation of the magnetic material followed by a lift-off process forming the final magnetic structures. The samples for the Lorentz transmission electron microscopy consist of magnetic nanodiscs prepared in a single lithography step. The samples for the magnetic x-ray transmission microscopy are used for time-resolved magnetization dynamic experiments, and magnetic nanodiscs are placed on a waveguide which is used for the generation of repeatable magnetic field pulses by passing an electric current through the waveguide. The waveguide is created in an extra lithography step.

A protocol for the fabrication of magnetic micro- and nanostructures with spin configurations forming magnetic vortices suitable for transmission electron microscopy (TEM) and magnetic transmission x-ray microscopy (MTXM) studies is presented.

Electron and x-ray magnetic microscopies allow for high-resolution magnetic imaging down to tens of nanometers. However, the samples need to be prepared ...

Fabrication of Robust Nanoscale Contact between a Silver Nanowire Electrode and CdS Buffer Layer in Cu(In,Ga)Se2 Thin-film Solar Cells

Silver nanowire transparent electrodes have been employed as window layers for Cu(In,Ga)Se2 thin-film solar cells. Bare silver nanowire electrodes normally result in very poor cell performance. Embedding or sandwiching silver nanowires using moderately conductive transparent materials, such as indium tin oxide or zinc oxide, can improve cell performance. However, the solution-processed matrix layers can cause a significant number of interfacial defects between transparent electrodes and the CdS buffer, which can eventually result in low cell performance. This manuscript describes how to fabricate robust electrical contact between a silver nanowire electrode and the underlying CdS buffer layer in a Cu(In,Ga)Se2 solar cell, enabling high cell performance using matrix-free silver nanowire transparent electrodes. The matrix-free silver nanowire electrode fabricated by our method proves that the charge-carrier collection capability of silver nanowire electrode-based cells is as good as that of standard cells with sputtered ZnO:Al/i-ZnO as long as the silver nanowires and CdS have high-quality electrical contact. The high-quality electrical contact was achieved by depositing an additional CdS layer as thin as 10 nm onto the silver nanowire surface.

Fabrication of Robust Nanoscale Contact between a Silver Nanowire Electrode and CdS Buffer Layer in CuIn,GaSe2 Thin-film Solar Cells

In this protocol, we describe the detailed experimental procedure for the fabrication of a robust nanoscale contact between a silver nanowire network and CdS buffer layer in a CIGS thin-film solar cell.

Silver nanowire transparent electrodes have been employed as window layers for Cu(In,Ga)Se2 thin-film solar cells. Bare silver nanowire electrodes ...

Visualization of Failure and the Associated Grain-Scale Mechanical Behavior of Granular Soils under Shear using Synchrotron X-Ray Micro-Tomography

The rapid development of X-ray imaging techniques with image processing and analysis skills has enabled the acquisition of CT images of granular soils with high-spatial resolutions. Based on such CT images, grain-scale mechanical behavior such as particle kinematics (i.e., particle translations and particle rotations), strain localization and inter-particle contact evolution of granular soils can be quantitatively investigated. However, this is inaccessible using conventional experimental methods. This study demonstrates the exploration of the grain-scale mechanical behavior of a granular soil sample under triaxial compression using synchrotron X-ray micro-tomography (&#956;CT). With this method, a specially fabricated miniature loading apparatus is used to apply confining and axial stresses to the sample during the triaxial test. The apparatus is fitted into a synchrotron X-ray tomography setup so that high-spatial resolution CT images of the sample can be collected at different loading stages of the test without any disturbance to the sample. With the capability of extracting information at the macro scale (e.g., sample boundary stresses and strains from the triaxial apparatus setup) and the grain scale (e.g., grain movements and contact interactions from the CT images), this procedure provides an effective methodology to investigate the multi-scale mechanics of granular soils.

The protocol describes procedures to acquire high-spatial resolution computed tomography (CT) images of a granular soil during triaxial compression, and to apply image processing techniques to these CT images to explore the grain-scale mechanical behavior of the soil under loading.

The rapid development of X-ray imaging techniques with image processing and analysis skills has enabled the acquisition of CT images of granular soils ...

Improving the Combustion Performance of a Hybrid Rocket Engine using a Novel Fuel Grain with a Nested Helical Structure

A technique to improve the combustion performance of a hybrid rocket engine using a novel fuel grain structure is presented. This technique utilizes the different regression rates of acrylonitrile butadiene styrene and paraffin-based fuels, which increase the exchanges of both matter and energy by swirl flow and recirculation zones formed at the grooves between the adjacent vanes. The centrifugal casting technique is used to cast the paraffin-based fuel into an acrylonitrile butadiene styrene substrate made by three-dimensional printing. Using oxygen as the oxidizer, a series of tests were conducted to investigate the combustion performance of the novel fuel grain. In comparison to paraffin-based fuel grains, the fuel grain with a nested helical structure, which can be maintained throughout the combustion process, showed significant improvement in the regression rate and great potential in improvement of combustion efficiency.

A technique utilizing a solid fuel grain with a novel nested helical structure to improve the combustion performance of a hybrid rocket engine is presented.

A technique to improve the combustion performance of a hybrid rocket engine using a novel fuel grain structure is presented. This technique utilizes the ...