Name: micro-masonry for 3d additive micromanufacturing
Uploaded: 2014-08-01T15:00:00
Description: Watch this Scientific Journal Video about Micro-masonry for 3D Additive Micromanufacturing at JoVE.com

This work was supported by the NSF (CMMI-1351370).

1. Design Masks for Fabrication of Donor Substrate
<ol>
	<li>Design a mask with desired geometry. To fabricate 100 &#956;m x 100 &#956;m square silicon individual units, draw an array of 100 &#956;m x 100 &#956;m squares.</li>
	<li>Design a second mask with an identical geometry, with each side extending out an additional 15 &#956;m. For the array of 100 &#956;m x 100 &#956;m squares, draw an array of 130 &#956;m x 130 &#956;m squares that can cover the squares in step 1.1.</li>
	<li>Design the anchor geometry. Draw fo...

<ol>
	<li>Stix, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Toward+&#8220;Point+one.">Toward &#8220;Point one.</a> Sci Am. Feb. , 90-95 (1995).</li><li>Appenzeler, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Man+Who+Dared+to+Think+Small.">The Man Who Dared to Think Small.</a> Science. 254, 1300-1301 (1991).</li><li>Madou, M. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fundamentals+of+Microfabrications+The+Science+of+Miniaturization.">Fundamentals of Microfabrications The Science of Miniaturization.</a> , (2002).</li><li>Xia, Y., Whitesides, G. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Soft+Lithography.">Soft Lithography.</a> Angew Chem Int Ed. 38, 551-575 (1998).</li><li>Judy, J. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microelectromechanical+systems+(MEMS)+fabrication,+design+and+applications.">Microelectromechanical systems (MEMS) fabrication, design and applications.</a> Smart Mater Struct. 10, 1134-1154 (2001).</li><li>Jain, V. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Micromanufacturing Process. , (2012).</li><li>Keum, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Silicon+micro-masonry+using+elastomeric+stamps+for+three-dimensional+microfabrication.">Silicon micro-masonry using elastomeric stamps for three-dimensional microfabrication.</a> J Micromech Microeng. 22, 55018 (2012).</li><li>Keum, H., Chung, H., Kim, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrical+Contact+at+The+Interface+between+Silicon+and+Transfer-Printed+Gold+Films+by+Eutectic+Joining.">Electrical Contact at The Interface between Silicon and Transfer-Printed Gold Films by Eutectic Joining.</a> ACS Appl Mater Interfaces. 5, 6061 (2013).</li><li>Keum, H., Seong, M., Sinha, S., Kim, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrostatically+Driven+Collapsible+Au+Thin+Films+Assembled+Using+Transfer+Printing+for+Thermal+Switching.">Electrostatically Driven Collapsible Au Thin Films Assembled Using Transfer Printing for Thermal Switching.</a> Appl Phys Lett. 100, 211904 (2012).</li><li>Klaassen, E. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Silicon+fusion+bonding+and+deep+reactive+ion+etching:+a+new+technology+for+microstructures.">Silicon fusion bonding and deep reactive ion etching: a new technology for microstructures.</a> Sens Actuators A. 52, 132-139 (1996).</li><li>Barth, P. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Silicon+fusion+bonding+for+fabrication+of+sensors+actuators+and+microstructures.">Silicon fusion bonding for fabrication of sensors actuators and microstructures.</a> Sens Actuators. A21 - A23, 919-926 (1990).</li></ol>

Micro-masonry, presented in Figure 4, involves silicon fusion bonding in a material bonding step. Silicon fusion bonding is achieved by placing the sample in a rapid thermal annealing furnace (RTA furnace) and heating the sample at 950 &#176;C for 10 min. This annealing condition is both adoptable between Si &#8211; Si and Si &#8211; SiO2 bonding10,11. Alternatively, the Au bonded with a Si strip as found in Figure 5C&#160;adopts eutectic bonding, and therefore, the...

Microelectromechanical systems (MEMS), such as the miniaturization of large scale ordinary 3D machines, are indispensable for advancing modern technologies by providing performance enhancements and manufacturing cost reduction1,2. However, the current rate of technological advancement in MEMS cannot be maintained without continuous innovations in manufacturing technologies3-6. Common monolithic microfabrication primarily relies on layer-by-layer processes developed for the manufacture of integrated circuits (IC). This method has been quite successful at enabling mass production of high performance MEMS devices. However, owing to its complex layer-by-layer and electrochemically subtractive nature, manufacturing of diversely-shaped 3D MEMS structures and devices, while easy in the macroworld, is very challenging to achieve using this monolithic microfabrication. To enable more flexible 3D microfabrication with less process complexity, we developed a 3D additive micromanufacturing strategy (termed &#8216;micro/nano-masonry&#8217;) which involves a transfer printing-based assembly of micro/nanoscale materials in conjunction with rapid thermal annealing-enabled material bonding techniques.
Transfer printing is a method to transfer solid microscale materials (i.e.,&#160;&#8216;solid inks&#8217;) from a substrate where they are generated or grown to a different substrate by using controlled dry adhesion of elastomeric stamps. The typical procedure of micro-masonry starts with transfer printing. Prefabricated solid inks are transfer printed using a microtip stamp that is an advanced form of elastomeric stamps and the printed structures are subsequently annealed using rapid thermal annealing (RTA) to enhance ink-ink and ink-substrate adhesion. This manufacturing approach enables the construction of unusual microscale structures and devices that cannot be accommodated using other existing methods7.
Micro-masonry provides several attractive features not present in other methods: (a) the ability to integrate functional and structural solid inks of dissimilar materials to assemble MEMS sensors and actuators all integrated within the 3D structure; (b) the interfaces of assembled solid inks can function as electrical and thermal contacts9,10; (c) the assembly spatial resolution can be high (~1 &#956;m) by utilizing highly-scalable and well-understood lithographic processes for generating solid inks and highly-precise mechanical stages for transfer printing7; and (d) functional and structural solid inks can be integrated on both rigid and flexible substrates in planar or curvilinear geometries.

<table border="0" cellpadding="0" cellspacing="0" width="758">
	<tbody>
		<tr height="20">
			<td height="20" style="height:20px;width:217px;">Name of Material / Equipment</td>
			<td style="width:97px;">Company</td>
			<td style="width:97px;"></td>
			<td style="width:347px;">Comments / Description</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Az 5214</td>
			<td>Clariant</td>
			<td></td>
			<td>1.5 mm thick photoresist</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Su8-100</td>
			<td>Microchem</td>
			<td></td>
			<td>100 mm Photoresist used in mold</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Sylgard 184</td>
			<td>Dow Corning</td>
			<td></td>
			<td>PDMS mixed to fabricate stamp</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Hydrofluoric Acid</td>
			<td>Honeywell</td>
			<td></td>
			<td>Acid to etch silicon oxide layer</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">Silicon on insulator</td>
			<td>Ultrasil</td>
			<td></td>
			<td>Donor substrate was fabricated</td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;">trichlorosilane</td>
			<td>Sigma-Aldrich</td>
			<td></td>
			<td>Chemical used to help pealing of PDMS from mold</td>
		</tr>
	</tbody>
</table>

micro-masonry for 3d additive micromanufacturing

Transfer printing is a method to transfer solid micro/nanoscale materials (herein called &#8216;inks&#8217;) from a substrate where they are generated to a different substrate by utilizing elastomeric stamps. Transfer printing enables the integration of heterogeneous materials to fabricate unexampled structures or functional systems that are found in recent advanced devices such as flexible and stretchable solar cells and LED arrays. While transfer printing exhibits unique features in material assembly capability, the use of adhesive layers or the surface modification such as deposition of self-assembled monolayer (SAM) on substrates for enhancing printing processes hinders its wide adaptation in microassembly of microelectromechanical system (MEMS) structures and devices. To overcome this shortcoming, we developed an advanced mode of transfer printing which deterministically assembles individual microscale objects solely through controlling surface contact area without any surface alteration. The absence of an adhesive layer or other modification and the subsequent material bonding processes ensure not only mechanical bonding, but also thermal and electrical connection between assembled materials, which further opens various applications in adaptation in building unusual MEMS devices.

Micro-masonry enables heterogeneous material integration to generate MEMS structures that are very challenging or impossible to achieve by monolithic microfabrication processes. In order to demonstrate its capability, a structure (called a &#8216;micro teapot&#8217;) is fabricated solely through micro-masonry. Figure 4A&#160;is an optical microscope image of fabricated Si inks on a donor substrate. The designed inks are discs with different dimensions made of single crystalline silicon, which are the bui...

Watch this Scientific Journal Video about Micro-masonry for 3D Additive Micromanufacturing at JoVE.com

Micro-masonry for 3D Additive Micromanufacturing

This paper introduces a 3D additive micromanufacturing strategy (termed &#8216;micro-masonry&#8217;) for the flexible fabrication of microelectromechanical system (MEMS) structures and devices. This approach involves transfer printing-based assembly of micro/nanoscale materials in conjunction with rapid thermal annealing-enabled material bonding techniques.

Transfer printing is a method to transfer solid micro/nanoscale materials (herein called &#8216;inks&#8217;) from a substrate where they are generated to ...

Research

Education

JoVE Core

JoVE Journal

Civil Engineering

Engineering

Unit 1

Masonry

SCIENTISTS IN ACTION

High-resolution, High-speed, Three-dimensional Video Imaging with Digital Fringe Projection Techniques

Digital fringe projection (DFP) techniques provide dense 3D measurements of dynamically changing surfaces.&#160;Like the human eyes and brain, DFP uses ...

Scalable Nanohelices for Predictive Studies and Enhanced 3D Visualization

Spring-like materials are ubiquitous in nature and of interest in nanotechnology for energy harvesting, hydrogen storage, and biological sensing ...

Novel 3D/VR Interactive Environment for MD Simulations, Visualization and Analysis

The increasing development of computing (hardware and software) in the last decades has impacted scientific research in many fields including materials ...

Energy Dispersive X-ray Tomography for 3D Elemental Mapping of Individual Nanoparticles

Energy dispersive X-ray spectroscopy within the scanning transmission electron microscope (STEM) provides accurate elemental analysis with high spatial ...

3D Printing of Biomolecular Models for Research and Pedagogy

The construction of physical three-dimensional (3D) models of biomolecules can uniquely contribute to the study of the structure-function relationship. 3D ...

A 3D-printed Chamber for Organic Optoelectronic Device Degradation Testing

In this manuscript, we outline the manufacture of a small, portable, easy-to-use atmospheric chamber for organic and perovskite optoelectronic devices, ...

Multi-material Ceramic-Based Components &#8211; Additive Manufacturing of Black-and-white Zirconia Components by Thermoplastic 3D-Printing (CerAM - T3DP)

To combine the benefits of Additive Manufacturing (AM) with the benefits of Functionally Graded Materials (FGM) to ceramic-based 4D components (three ...

Additive Manufacturing of Functionally Graded Ceramic Materials by Stereolithography

An additive manufacturing technology is applied to obtain functionally graded ceramic parts. This technology, based on digital light ...

Manufacturing, Control, and Performance Evaluation of a Gecko-Inspired Soft Robot

This protocol presents a method for manufacturing, control, and evaluation of the performance of a soft robot that can climb inclined flat surfaces with ...

3D Printing - Evaluating Particle Emissions of a 3D Printing Pen

Three-dimensional (3D) printing as a type of additive manufacturing shows continuing increase in application and consumer popularity. The fused filament ...