Name: ssvep-based experimental procedure for brain-robot interaction with humanoid robots
Uploaded: 2015-11-24T15:00:00.000+00:00
Duration: 11 min 1 s
Description: Watch this Scientific Journal Video about SSVEP-based Experimental Procedure for Brain-Robot Interaction with Humanoid Robots at JoVE.com

<p class="jove_content"> Los autores desean expresar su agradecimiento al Sr. Hong Hu por su ayuda en la realización de los experimentos reportados en este trabajo. Esta obra fue financiada en parte por la Fundación Nacional de Ciencias Naturales de China (N ° 61473207). </p>

<p class="jove_title"> 1. Adquisición de señales de EEG </p><ol><li> Explicar el procedimiento experimental para el tema y obtener el consentimiento informado por escrito para participar en experimentos. </li><li> Medir la circunferencia de la cabeza del sujeto utilizando una cinta métrica y seleccionar el tamaño del casquillo EEG que está cerca de la medición. La disposición de electrodos se basa en el &quot;Sistema de 10 hasta 20 Internacional&quot; <sup>12.</sup> </li><li> Mida la distancia entre el nasión y inion. Use un lápiz marcador para marcar la piel 10% de la distancia como una referencia para la alineación de la tapa, y marcar el punto medio de la distancia que el vértice en el cuero cabelludo del sujeto. </li><li> Coloque la tapa de EEG en la materia mediante la alineación de la marca de 10% con el punto medio de los electrodos FP1 y FP2. Posición electrodo Cz de la tapa en el vértice. </li><li> Asegúrese de que el Fz, Cz, Pz y Oz se encuentran en la línea media de la cabeza, y que cada par de electrodos situados a ambos lados de la línea media se encuentran en una línea horizontal. </li><li>Unte los electrodos REF1 y REF2 con gel conductor. Coloque los electrodos de referencia en los mastoides izquierda y derecha utilizando cinta médica. Apriete el barbijo. </li><li> Coloque una jeringa de punta roma en los soportes de electrodos e inyectar gel conductor en cada electrodo en el orden siguiente: primero, el electrodo de &quot;tierra&quot; en la frente y segundo, los cinco electrodos utilizados en el experimento, O2, O1, Oz, Pz y Cz. </li><li> Sentar al sujeto en una cómoda silla de 60 cm delante de un monitor de estímulo. Instruya al sujeto para mantener su / sus ojos en el mismo nivel horizontal con el centro de la pantalla. </li><li> Conectar los hilos de los electrodos para el sistema de adquisición de datos EEG. Configure la velocidad de muestreo de 1 kHz. </li><li> Examine la calidad de la señal EEG en la dedicada DPC. Si hay un problema con un electrodo particular, gel reinyectar para ajustar la impedancia de la canal. </li><li> Utilice el SPC dedicado a parpadear cuatro imágenes robot en las frecuencias de 4.615, 12, 15 y 20Hz como estímulos visuales en la interfaz de usuario, como se muestra <strong>en</strong> la Figura <strong>2.</strong> </li></ol><p class="jove_title"> 2. Desconectado SSVEP Analizar Características </p><ol><li> Llevar a cabo 32 ensayos de experimentos de formación fuera de línea para cada sujeto y registrar sus señales cerebrales adquiridas del sistema EEG durante todo este proceso. <br /> NOTA: este proceso sólo se lleva a cabo por los sujetos de primera vez del experimento para establecer sus vectores de características SSVEP y entrenar el clasificador. </li><li> Cuando se inicia un juicio, seleccione un estímulo como el objetivo al azar y mostrar una flecha amarilla por encima de ella. </li><li> 1 segundo después, parpadear los cuatro estímulos visuales en diferentes frecuencias en la interfaz de usuario durante 5 segundos. </li><li> Solicitar el objeto de centrarse en el objetivo de estímulo seleccionado, manteniendo su / su movimiento corporal al mínimo. </li><li> Después de cada ensayo, dar el sec tema 3 para relajarse, y luego empezar la siguiente prueba. </li><li> Cuando hayan terminado todos los ensayos, leer los datos guardados. Extracto de una época de datos 3-sec ser<html> entre 2 y 5 segundos después del disparo que selecciona un estímulo como el objetivo en cada ensayo. </li><li> Calcular la densidad espectral de potencia (PSD) de las épocas de datos utilizando el analizador de datos sin conexión en los scripts de MATLAB. Utilice el algoritmo de procesamiento se describe en detalles a continuación: <ol><li> Calcular los coeficientes de análisis de correlación canónica (CCA) de los datos de EEG multicanal con unos datos de referencia. CCA es un método estadístico multivariable utilizado para dos conjuntos de datos para encontrar su correlación subyacente <sup>13.</sup> Teniendo en cuenta el segmento 3s de EEG multicanal <em>X</em> de datos y datos de referencia <em>Y</em> de la misma longitud, utilice CCA para encontrar los vectores de ponderación, <em>W <sub>x</sub></em> y <em>W <sub>y,</sub></em> para maximizar el coeficiente de correlación <em>ρ</em> entre <em>x = X <sup>T</sup> W <sub>x</sub> e</em> y <em>= Y <sup>T</sup> W <sub>y.</sub></em> Establecer los datos de referencia para ser las señales periódicas en ciertas frecuencias de estímulo. <br />/ftp_upload/53558/53558eq1.jpg &quot;/&gt; <br /> <em>donde</em> f <em><sub>1,</sub> f <sub>2, 3</sub> f, f <sub>4</sub></em> son las frecuencias características de los cuatro estímulos visuales. </li><li> Filtrado espacialmente los datos de EEG multicanal <em>X</em> utilizando los coeficientes calculados CCA <em>W <sub>x</sub></em> para obtener una sola dimensión <em>x</em> de datos filtrados, que tiene la correlación más prominente con la combinación lineal de los datos de referencia. </li><li> Calcular la PSD de los <em>datos x</em> filtrados espacialmente utilizando Transformada Rápida de Fourier (FFT). <br /><img alt="Ecuación 2" src="/files/ftp_upload/53558/53558eq2.jpg" /><br /> <em>donde</em> N <em><sub>FFT</sub></em> es el tamaño de la muestra de datos <em>x,</em> y FFT <em>(x, N <sub>FFT)</sub> devuelve el</em> -point Fourier discreta <em>N <sub>FFT</sub></em> transformada de <em>x.</em> </li><li> Normalizar el PSD con respecto a su valor medio entre 3 y 30 Hz. <br /><img alt="Ecuación 3" src="/files/ftp_upload/53558/53558eq3.jpg" /><br /> dónde60; <img alt="Ecuación 3 Denominador" src="/files/ftp_upload/53558/53558eq3denominator.jpg" /> denota la media del espectro de potencia entre 3 y 30Hz. </li></ol></li><li> Calibrar los parámetros de clasificación de las cuatro frecuencias de estímulo. En primer lugar, observar el espectro PSD normalizado que corresponde a su objetivo de estímulo, y configurar manualmente la frecuencia con la amplitud PSD fuerte como la frecuencia característica. En base a la frecuencia característica, dividir los datos PSD normalizados en dos grupos: uno se adquiere cuando el estímulo correspondiente se selecciona como destino, y el otro se adquiere cuando se seleccionan los estímulos no objetivo. Calcular el valor medio de cada conjunto respectivamente. Determinar el umbral de la mediana de los dos valores medios para clasificar el objetivo y no objetivo establece <sup>14.</sup> </li></ol><p class="jove_title"> 3. Procesamiento Online señales cerebrales </p><ol><li> Abra el procesador de señal en línea como se muestra <strong>en</strong> la Figura <strong>3,</strong> que se desarrolla basándose sobre el medio ambiente OpenViBE y las secuencias de comandos de MATLAB, en la DPC para las señales cerebrales de procesamiento en línea. </li><li> Haga doble clic en el cuadro de la señal Adquirir y Proceso, que está marcado con un círculo rojo <strong>en</strong> la figura <strong>3,</strong> para abrir la ventana de configuración OpenViBE. Configure los parámetros de clasificación para el sujeto:. Establecer la velocidad de muestreo de 1 kHz, ajuste la longitud de tiempo para la FFT como 3 seg, y establecer las frecuencias características de acuerdo a los resultados de análisis fuera de línea, <em>por ejemplo,</em> 4.667, 24, 15 y 20 Hz . </li><li> Haga clic en el botón Empieza a funcionar el procesador de señal en línea, que procesa los datos en tiempo real utilizando el siguiente algoritmo en tres pasos. </li><li> En primer lugar, el algoritmo adquiere datos de EEG de los canales de Oz, O1, O2, Pz y CPZ del sistema de EEG cada 0,5 s, y extrae el segmento de datos de los últimos 3s para el procesamiento en línea. </li><li> En segundo lugar, el algoritmo procesa el segmento de datos 3-sec usando los algoritmos descritos en el paso 2.7, y calcula el tiempo real PSD para CLASIFICACción. </li><li> En tercer lugar, el algoritmo clasifica los patrones de ondas cerebrales de acuerdo con las amplitudes de PSD en las cuatro frecuencias de características. Cuando la amplitud de una frecuencia característica está por encima de un umbral dado, clasificar el estímulo parpadeo a la frecuencia correspondiente como el objetivo SSVEP. </li></ol><p class="jove_title"> 4. Conexión del robot humanoide </p><ol><li> Pulse el botón en el pecho del robot humanoide y esperar a que se inicie. <br /> NOTA: este proceso dura aproximadamente 1 min y se completa cuando el robot dice &quot;OGNAK GNOUK&quot;, mientras que en su botón en el pecho se convierte en blanco. </li><li> Establezca su conexión Wireless Fidelity (WiFi) a la DPC <sup>15.</sup> </li><li> Abra el controlador del robot programado en C ++ guiones visuales en la DPC. El controlador recibe los resultados de la clasificación del procesador de señal en línea a través de Virtual-realidad periférica Red de interfaz (VRPN), que se traduce en los comandos del robot, y controla los comportamientos correspondientes del humanoid robot a través de conexión inalámbrica. </li><li> Configure el controlador del robot introduciendo la dirección IP del robot de acuerdo con su conexión Wi-Fi, que define tres conjuntos de comportamientos del robot que se puede cambiar fácilmente para realizar las tres tareas diferentes, y el establecimiento de los parámetros de ejecución de estos comportamientos <em>(por</em> ejemplo., La velocidad al caminar o distancia) para adaptarse a la exigencia de tareas. <br /> NOTA: más detalles de estos comportamientos se describen en los pasos 5.2.1, 5.3.1, y 5.4.1. </li><li> Haga clic en el botón Generar de la plataforma Visual Studio para ejecutar el controlador del robot. </li><li> Abra el programa chorégraphe en el SPC. Haga clic en &quot;Conectar a&quot; botón para que aparezca un widget de conexión. Seleccione el robot para ser controlado en función de su dirección IP y, haga doble clic en su icono para conectarse a él. </li><li> Abra el monitor de video en el menú Ver en la barra de menú chorégraphe y mueva el monitor a la parte frontal de la interfaz de usuario para mostrar información de vídeo en directo desde la cámara del robot. </li></ol> &lt;p class = &quot;jove_title&quot;&gt; 5. La realización de experimentos de control y regulación </p><ol><li> Solicitar el sujeto para llevar a cabo tres tareas de control en lazo cerrado específicos dentro de diferentes entornos con el fin de evaluar el desempeño interacción cerebro-robot. <br /> NOTA: estas tareas, que son importantes en aplicaciones robóticas, ya que son útiles en la asistencia a las personas con discapacidad y de edad avanzada en su vida diaria, la necesidad de activar diferentes comportamientos del robot. </li><li> Llevar a cabo la primera tarea de control de circuito cerrado de telepresencia controlar el robot humanoide mediante señales cerebrales para caminar a través de los obstáculos y apretar un interruptor de la luz para encender la luz, como se muestra <strong>en</strong> la Figura <strong>4.</strong> <ol><li> Para llevar a cabo la primera tarea, controlar las conductas de robots que son codificadas por los cuatro estímulos SSVEP como: dando un paso adelante con una distancia fija de 0,15 m, girar a la izquierda con un radian fijo de 0,3 rad, girando a la derecha con un radian fijo de 0,3 rad, y empujando el interruptor utilizando su mano derecha. <br /> NOTA: la CONFIGURACIÓNproceso de se describe en el paso 4.4. </li><li> Informar al tema de la tarea objetivo y los cuatro comportamientos para ser controlado. </li><li> Ejecute el controlador del robot como en los pasos 4.5-4.7, y comenzar el experimento. Dar el tema de la libertad de percibir el entorno y tomar decisiones basadas en la retroalimentación de video en vivo, y para activar los comportamientos del robot por mirando a los estímulos correspondientes. <br /> NOTA: no Instrucción o la ayuda se debe dar al sujeto a no ser en situaciones de emergencia, <em>por ejemplo,</em> el robot está a punto de chocar con un obstáculo.. </li></ol></li><li> Llevar a cabo la segunda tarea de telepresencia controlar el robot humanoide a través de las señales del cerebro a caminar hacia la escalera siguiendo la señal de salida, como se muestra <strong>en</strong> la Figura <strong>5.</strong> Cuando confrontar los transeúntes, pida al sujeto para controlar el robot que decir &quot;perdón&quot; y esperar a que el transeúntes que dan paso. <ol><li> Controla los comportamientos del robot codificadas por los cuatro estímulos SSVEP como: caminar hacia adelante continuously a una velocidad de 0,05 m / seg, girando a la izquierda de forma continua a una velocidad de 0,1 rad / seg, girando a la derecha de forma continua a una velocidad de 0,1 rad / seg, y detener todos los comportamientos para caminar. </li><li> Cambie el controlador del robot a la función de control de la postura dependiente <sup>16.</sup> <br /> NOTA: cuando el robot está caminando, esta función utiliza el cuarto de estímulo como el comando de detener los comportamientos para caminar; cuando el robot no es caminar, usa el cuarto de estímulo para controlar el robot que decir &quot;perdón&quot;. La función se implementa en los scripts C ++ mediante la detección de estado de pie del robot. </li><li> Informar al tema de la tarea objetivo y los cinco comportamientos para ser controlado. </li><li> Ejecute el controlador del robot y empezar el experimento, como se describe en el paso 5.2.3. </li></ol></li><li> Llevar a cabo la tercera tarea de telepresencia controlar el robot humanoide a caminar hacia un objetivo globo, para recogerlo y entregarlo a la mano del sujeto, como se muestra <strong>en</strong> la Figura <strong>6</strong>. <ol><li> Controla los comportamientos del robot codificadas por los cuatro estímulos SSVEP como: dando un paso adelante con una distancia fija de 0,15 m, girar a la izquierda con un radian fijo de 0,3 rad, girando a la derecha con un radian fijo de 0,3 rad, y recoger objetos. </li><li> Active la función de control de la postura dependiente en el controlador del robot volver a utilizar el cuarto de estímulo como el mando de sofocar el objeto cuando ya ha sido recogido. </li><li> Informar al tema de la tarea objetivo y los cinco comportamientos para ser controlado. </li><li> Ejecute el controlador del robot y empezar el experimento, como se describe en el paso 5.2.3. </li></ol></li></ol>

<ol>
	<li>McFarland, D. J., Wolpaw, J. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Brain-Computer+Interface+Operation+of+Robotic+and+Prosthetic+Devices.">Brain-Computer Interface Operation of Robotic and Prosthetic Devices.</a> <em style='font-style: italic'>Computer</em>. <b>41</b>, 52-56 (2008).</li><li>Lebedev, M. A., Nicolelis, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Brain-machine+interfaces:+Past,+present+and+future.">Brain-machine interfaces: Past, present and future.</a> <em style='font-style: italic'>Trends Neruosci</em>. <b>29</b> (9), 536-546 (2006).</li><li>Wolpaw, J. R., Birbaumer, N., McFarland, D. J., Pfurtscheller, G., Vaughan, T. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Brain-computer+interfaces+for+communication+and+control.">Brain-computer interfaces for communication and control.</a> <em style='font-style: italic'>Clin. Neurophysiol</em>. <b>113</b>, 767-791 (2002).</li><li>Bell, C. J., Shenoy, P., Chalodhorn, R., Rao, R. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Control+of+a+humanoid+robot+by+a+noninvasive+brain-computer+interface+in+humans.">Control of a humanoid robot by a noninvasive brain-computer interface in humans.</a> <em style='font-style: italic'>J. Neural. Eng</em>. <b>5</b>, 214-220 (2008).</li><li>Li, W., Li, M., Zhao, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Control+of+humanoid+robot+via+motion-onset+visual+evoked+potentials.">Control of humanoid robot via motion-onset visual evoked potentials.</a> <em style='font-style: italic'>Front. Syst. Neurosci</em>. <b>8</b>, 247 (2014).</li><li>Regan, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Some+characteristics+of+average+steady-state+and+transient+responses+evoked+by+modulated+light.">Some characteristics of average steady-state and transient responses evoked by modulated light.</a> <em style='font-style: italic'>Electroencephalogr. Clin. Neurophysiol</em>. <b>20</b>, 238-248 (1966).</li><li>Vialatte, F. B., Maurice, M., Dauwels, J., Cichocki, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Steady-state+visually+evoked+potentials:+focus+on+essential+paradigms+and+future+perspectives.">Steady-state visually evoked potentials: focus on essential paradigms and future perspectives.</a> <em style='font-style: italic'>Prog. Neurobiol</em>. <b>90</b>, 418-438 (2010).</li><li>Bin, G., Gao, X., Wang, Y., Li, Y., Hong, B., Gao, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+high-speed+BCI+based+on+code+modulation+VEP.">A high-speed BCI based on code modulation VEP.</a> <em style='font-style: italic'>J. Neural. Eng</em>. <b>8</b>, 025015 (2011).</li><li>Sutton, S., Braren, M., Zubin, J., John, E. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evoked-potential+correlates+of+stimulus+uncertainty.">Evoked-potential correlates of stimulus uncertainty.</a> <em style='font-style: italic'>Science</em>. <b>150</b>, 1187-1188 (1965).</li><li>Pfurtscheller, G., Lopes da Silva, H. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Event-related+EEG/MEG+synchronization+and+desynchronization:+basic+principles.">Event-related EEG/MEG synchronization and desynchronization: basic principles.</a> <em style='font-style: italic'>Clin. Neurophysiol</em>. <b>110</b>, 1842-1857 (1999).</li><li>Zhao, J., Meng, Q., Li, W., Li, M., Sun, F., Chen, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=OpenViBE-based+brainwave+control+system+for+Cerebot.">OpenViBE-based brainwave control system for Cerebot.</a> <em style='font-style: italic'>Proc. IEEE International Conference on Robotics and Biomimetics</em>. , 1169-1174 (2013).</li><li>Homan, R. W., Herman, J., Purdy, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cerebral+location+of+international+10-20+system+electrode+placement.">Cerebral location of international 10-20 system electrode placement.</a> <em style='font-style: italic'>Electroencephalogr. Clin. Neurophysiol</em>. <b>66</b>, 376-382 (1987).</li><li>Bin, G., Gao, X., Yan, Z., Hong, B., Gao, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+online+multi-channel+SSVEP-based+brain-computer+interface+using+a+canonical+correlation+analysis+method.">An online multi-channel SSVEP-based brain-computer interface using a canonical correlation analysis method.</a> <em style='font-style: italic'>J. Neural. Eng</em>. <b>6</b>, 046002 (2009).</li><li>Wang, Y., Wang, R., Gao, X., Hong, B., Gao, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+practical+VEP-based+brain-computer+interface.">A practical VEP-based brain-computer interface.</a> <em style='font-style: italic'>IEEE Trans. Neural Syst. Rehabil. Eng</em>. <b>14</b>, 234-239 (2006).</li><li>Chae, Y., Jeong, J., Jo, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Toward+brain-actuated+humanoid+robots:+asynchronous+direct+control+using+an+EEG-based+BCI.">Toward brain-actuated humanoid robots: asynchronous direct control using an EEG-based BCI.</a> <em style='font-style: italic'>IEEE T. Robot</em>. <b>28</b>, 1131-1144 (2012).</li><li>Croft, R. J., Barry, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Removal+of+ocular+artifact+from+the+EEG:+a+review.">Removal of ocular artifact from the EEG: a review.</a> <em style='font-style: italic'>Neurophysiol. Clin</em>. <b>30</b>, 5-19 (2000).</li><li>Hwang, H. J., Hwan Kim, D., Han, C. H., Im, C. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+new+dual-frequency+stimulation+method+to+increase+the+number+of+visual+stimuli+for+multi-class+SSVEP-based+brain-computer+interface+(BCI).">A new dual-frequency stimulation method to increase the number of visual stimuli for multi-class SSVEP-based brain-computer interface (BCI).</a> <em style='font-style: italic'>Brain Res</em>. <b>1515</b>, 66-77 (2013).</li><li>Wang, M., Daly, I., Allison, B., Jin, J., Zhang, Y., Chen, L., Wang, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+new+hybrid+BCI+paradigm+based+on+P300+and+SSVEP.">A new hybrid BCI paradigm based on P300 and SSVEP.</a> <em style='font-style: italic'>J Neurosci Methods</em>. <b>244</b>, 16-25 (2015).</li><li>Allison, B. Z., Jin, J., Zhang, Y., Wang, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+four-choice+hybrid+P300+SSVEP+BCI+for+improved+accuracy.">A four-choice hybrid P300 SSVEP BCI for improved accuracy.</a> <em style='font-style: italic'>Brain-Computer Interfaces</em>. <b>1</b>, 17-26 (2014).</li><li>Pan, J. H., Xie, Q., Herman, Y., Wang, F., Di, H., Laureys, S., Yu, R., Li, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Detecting+awareness+in+patients+with+disorders+of+consciousness+using+a+hybrid+brain-computer+interface.">Detecting awareness in patients with disorders of consciousness using a hybrid brain-computer interface.</a> <em style='font-style: italic'>J. Neural. Eng</em>. <b>11</b>, 056007 (2014).</li><li>Li, J., Ji, H., Cao, L., Zhang, D., Gu, R., Xia, B., Wu, Q. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+and+application+of+a+hybrid+brain+computer+interface+for+real+wheelchair+parallel+control+with+multi-degree+of+freedom.">Evaluation and application of a hybrid brain computer interface for real wheelchair parallel control with multi-degree of freedom.</a> <em style='font-style: italic'>Int J Neural Syst</em>. <b>24</b>, 1450014-14 (2014).</li><li>Zhao, J., Meng, Q., Li, W., Li, M., Chen, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=SSVEP-based+hierarchical+architecture+for+control+of+a+humanoid+robot+with+mind.">SSVEP-based hierarchical architecture for control of a humanoid robot with mind.</a> <em style='font-style: italic'>Proc. 11th World Congress on Intelligent Control and Automation</em>. , 2401-2406 (2014).</li><li>Zhu, D., Bieger, J., Molina, G. G., Aarts, R. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+survey+of+stimulation+methods+used+in+SSVEP-based+BCIs.">A survey of stimulation methods used in SSVEP-based BCIs.</a> <em style='font-style: italic'>Comput Intell Neurosci</em>. <b>2010</b>, 1-12 (2010).</li><li>Muller-Putz, G. R., Scherer, R., Brauneis, C., Pfurtscheller, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Steady-state+visual+evoked+potential+(SSVEP)-based+communication:+impact+of+harmonic+frequency+components.">Steady-state visual evoked potential (SSVEP)-based communication: impact of harmonic frequency components.</a> <em style='font-style: italic'>J Neural Eng</em>. <b>2</b>, 123-130 (2005).</li></ol>

<p class='jove_content'>The authors have nothing to disclose.</p>

<p class="jove_content"> Este trabajo presenta un procedimiento experimental basado en SSVEP para establecer el sistema de interacción cerebro-robot con robots humanoides mediante la integración de múltiples programas de software. Debido a que la intención humana se percibe mediante la interpretación de las señales de EEG en tiempo real, es crítico para verificar las conexiones de electrodo y cualidades señal del EEG antes de realizar el experimento. Si las señales adquiridas de todos los electrodos son de cualidades pobres, es necesar...

<p class="jove_content"> Cerebro-Robot Interaction (BRI), que proporciona una innovadora vía de comunicación entre el ser humano y un dispositivo robótico a través de las señales del cerebro, es posible en ayudar a las personas con discapacidad en su vida diaria <sup>1,2.</sup> Una variedad de métodos son capaces de adquirir las señales del cerebro, ya sea invasiva o no invasiva, como electrocorticografía (ECoG), electroencefalograma (EEG), la resonancia magnética funcional (fMRI), etc. El método no invasivo más utilizado para la construcción de la sistema BRI es adquirir señales EEG de electrodos colocados en el cuero cabelludo. Este método es barato, fácil de usar, y proporciona una resolución temporal aceptable <sup>3.</sup> Entre una variedad de dispositivos robóticos, los robots humanoides son avanzados, ya que se crean para imitar algunas de las mismas tareas físicas y mentales que los seres humanos se someten a diario. BRI con un robot humanoide jugará un papel importante en la asistencia a los enfermos y ancianos, así como la realización de trabajos insalubres o peligrosos. Pero el controlde un robot humanoide a través del sistema BRI es muy difícil, ya que se desarrolla el robot humanoide con el movimiento de todo el cuerpo para realizar tareas complejas, tales como la asistencia personal <sup>4, 5.</sup> </p><p class="jove_content"> Steady-State potencial evocado visual (SSVEP) es un tipo de señal cerebral evocada por la modulación del estímulo visual a una frecuencia dada <sup>6.</sup> Contiene sinusoides a las frecuencias fundamentales y armónicas de estímulo parpadeo, y destacada aparece en toda la corteza visual en la región occipital del cuero cabelludo <sup>7.</sup> La razón para elegir las señales SSVEP es que el sistema BRI basado en SSVEP rendimientos relativamente alta tasa de transferencia de información y requiere menos formación <sup>8.</sup> Otros tipos de ondas cerebrales, como los potenciales evocados (ERPs) <sup>9</sup> o motor imaginería (MI) Potenciales <sup>10,</sup> también puede ser embebido en este procedimiento experimental. </p><p class="jove_content"> Nuestro procedimiento para la interacción cerebro-robot con humanoiderobots se basa en Cerebot - una plataforma robot humanoide con control mental - que consiste en un sistema de adquisición de datos de EEG y un robot humanoide <sup>11.</sup> El sistema EEG es capaz de registrar, pre-proceso y señales bio-potencial de visualización adquiridos por varios tipos de electrodos. Proporciona analógico múltiples E / S y E / S digitales y es capaz de grabar hasta 128 canales de señal simultáneamente a una velocidad de muestreo de 30 kHz con una resolución de 16 bits. Sus kits de desarrollo de software en C ++ y MATLAB son fáciles para los usuarios diseñar los procedimientos experimentales. El robot humanoide tiene 25 grados de libertad y está equipado con varios sensores, incluyendo 2 cámaras, 4 micrófonos, 2 telémetros de sonar, 2 IR emisores y receptores, 1 tablero inercial, 9 sensores táctiles, y 8 sensores de presión. Proporciona chorégraphe y C ++ SDK para la creación y edición de los movimientos y comportamientos de robots interactivos. </p><p class="jove_content"> El objetivo general de este método es establecer un proce experimental basada en SSVEPmiento mediante la integración de múltiples programas de software, como OpenViBE, Choregraph, software Central, así como los programas desarrollados por el usuario escritas en C ++ y MATLAB, para que el estudio de la interacción cerebro-robot con robots humanoides <sup>11.</sup> <strong>La figura 1 muestra</strong> la estructura del sistema. El ordenador presentación del estímulo específico (SPC) muestra la interfaz de usuario para proporcionar al sujeto con estímulos visuales, instrucciones y evaluaciones ambientales. El equipo de procesamiento de datos dedicada (DPC) corre el Registrador de Datos y el analizador de datos sin conexión en el proceso de capacitación fuera de línea, y ejecuta el procesador de señal en línea y el controlador del robot para el control en línea del robot humanoide. En comparación con otros sistemas de control basados ​​en SSVEP, nuestro sistema es más confiable, más flexible, y sobre todo más conveniente para ser reutilizado y actualizado a medida que se desarrolla mediante la integración de una serie de paquetes de software estandarizados, como OpenViBE, Choregraph, software central, y módulos escritos en C ++y MATLAB. </p><p class="jove_content"> El siguiente procedimiento fue revisado y aprobado por Tianjin universidad médica comité de ética del hospital general y todos los sujetos dieron su consentimiento por escrito. </p>

<table><tbody><tr><td>Cerebus EEG Data Acquisition System</td><td>Blackrock Microsystems</td><td>4176-9967</td><td></td></tr><tr><td>NAO humanoid robot</td><td>Aldebaran Robotics</td><td>H25</td><td></td></tr><tr><td>EEG cap</td><td>Neuroscan</td><td>8732</td><td></td></tr><tr><td>Ten20 Conductive gel</td><td>Weaver and company</td><td>10-20-8</td><td></td></tr></tbody></table>

ssvep-based experimental procedure for brain-robot interaction with humanoid robots

<p class='jove_content'>Brain-Robot Interaction (BRI), which provides an innovative communication pathway between human and a robotic device via brain signals, is prospective in helping the disabled in their daily lives. The overall goal of our method is to establish an SSVEP-based experimental procedure by integrating multiple software programs, such as OpenViBE, Choregraph, and Central software as well as user developed programs written in C++ and MATLAB, to enable the study of brain-robot interaction with humanoid robots.</p>
<p class='jove_content'>This is achieved by first placing EEG electrodes on a human subject to measure the brain responses through an EEG data acquisition system. A user interface is used to elicit SSVEP responses and to display video feedback in the closed-loop control experiments. The second step is to record the EEG signals of first-time subjects, to analyze their SSVEP features offline, and to train the classifier for each subject. Next, the Online Signal Processor and the Robot Controller are configured for the online control of a humanoid robot. As the final step, the subject completes three specific closed-loop control experiments within different environments to evaluate the brain-robot interaction performance.</p>
<p class='jove_content'>The advantage of this approach is its reliability and flexibility because it is developed by integrating multiple software programs. The results show that using this approach, the subject is capable of interacting with the humanoid robot via brain signals. This allows the mind-controlled humanoid robot to perform typical tasks that are popular in robotic research and are helpful in assisting the disabled.</p>

<p class="jove_content" fo:keep-together.within-page="1"> Los resultados aquí presentados se obtuvieron a partir de un sujeto masculino que tiene corregida a la versión normal. <strong>La Figura 7</strong> muestra el procedimiento de procesamiento de datos de EEG, incluyendo la extracción de una época de datos multicanal <strong>(Figura</strong> 7A), filtrando espacialmente los datos utilizando coeficientes de CCA <strong>(Figura 7B)</strong> , y calculando el PSD normalizado <strong>(Figura 7C).</strong> </p><p class="jove_content" fo:keep...

Watch this Scientific Journal Video about SSVEP-based Experimental Procedure for Brain-Robot Interaction with Humanoid Robots at JoVE.com

SSVEP-based Experimental Procedure for Brain-Robot Interaction with Humanoid Robots

<p class='jove_content'>The overall goal of this method is to establish an SSVEP-based experimental procedure by integrating multiple software programs to enable the study of brain-robot interaction with humanoid robots, which is prospective in assisting the sick and elderly as well as performing unsanitary or dangerous jobs.</p>

SSVEP basada Procedimiento Experimental para la interacción cerebro-Robot con Humanoid Robots

Brain-Robot Interaction (BRI), which provides an innovative communication pathway between human and a robotic device via brain signals, is prospective in ...

ssvep-based-experimental-procedure-for-brain-robot-interaction-with

Research

Education

JoVE Core

JoVE Journal

Electrical Engineering

Engineering

Unit 1

Introduction to Control Systems

SCIENTISTS IN ACTION

13.1K vistas.  Tianjin University. The overall goal of this method is to establish an SSVEP-based experimental procedure by integrating multiple software programs to enable the study of brain-robot interaction with humanoid robots, which is prospective in assisting the sick and elderly as well as performing unsanitary or dangerous jobs.

Video: SSVEP-based Experimental Procedure for Brain-Robot Interaction with Humanoid Robots

Eusociality and Division of Labor

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Simulating Eusocial and Solitary Behavior
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">Note: In this simulation, you will portray either a eusocial or solitary animal. The goal of this simulation is to maximize your fitness by reproducing as many offspring as possible during the allotted five minutes. To do this, you must forage for resources and reproduce within the constraints of your assigned role.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Assuming a class size of 10, 4 individuals should form the solitary, or the carpenter bee group, and the remaining 6 students should form the eusocial, or the honeybee group. Note: The eusocial honeybee group will include one queen, one drone, and four workers. The queen and the drone will reproduce and protect the resources, while the workers will forage and steal resources. The solitary carpenter bee students must perform all of the tasks in this activity, with the exception of reproduction, by themselves.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Store your resources for reproduction in the nest bowl provided by your instructor. These resources are represented by assorted beans that can be collected by foraging in the environment buckets or by stealing from other nests.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">The blue cups are male and the red cups are female, and they will be used to produce offspring. This is done by combining all four bean types in one red or blue cup to symbolize the resources needed to reproduce, and then stacking one completed cup inside a cup of the opposite color that also contains one of each bean type, to simulate a mating that produces two-cup offspring, one from each parent.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">To reproduce, the solitary students will need to seek out another solitary student with an opposite-colored cup. Conversely, the eusocial queen and drone always reproduce with each other. HYPOTHESES: The hypotheses for this lab activity are based on the possible benefits of eusocial groups over solitary individuals. The alternate hypothesis could be that one group, either eusocial or solitary, will have an advantage over the other, given the ecological constraints, and this will be reflected in the number of offspring per capita. The null hypothesis might be that there will be advantage conferred by either of the strategies.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">If you are a worker in the honeybee group or a solitary student in the carpenter bee group, walk to the other side of the room to search through the rice on the foraging side of the room for one bean and bring the bean back to your bowl on the nest side of the room. Note: Even though this activity has a 5-minute time limit, running is not permitted. 
</div></li><li data-sub-note-item="1-7"><div class="lab-step">If a solitary student is not present at a neighboring bowl, you can try to steal one bean at a time, using a cup to scoop up the bean without touching the bean or the bowl with anything but the cup. You must immediately stop trying to steal if the solitary student makes it back to their bowl before you finish stealing. Note: Neighbors cannot steal from eusocial nests because the queen and drone do not leave their nest.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">You can create offspring at any time during the activity. Remember to label each cup that is contributed to an offspring with your name to keep track of your reproduction.  Note: Eusocial groups produce two offspring for their group every time they reproduce, while solitary students produce only one offspring per reproductive coupling.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">If you were a solitary carpenter bee, record the number of offspring you produced in the appropriate row of the table. <a href="https://www.jove.com/CDNSource/lm/labs/36/Table_1_Eusociality_and_division_of_labor.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="2-2"><div class="lab-step">If you were a part of the eusocial honeybee group, record the number of offspring produced by your queen and drone.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">To calculate the fitness for a solitary carpenter bee student, simply count the number of offspring that the student produced.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">To calculate the fitness for a eusocial honeybee student, divide the number of offspring produced by the queen and drone by the number of members in the group, in this case 6, to get a per-student fitness value.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">When each student has calculated their respective fitness value, calculate the average number of offspring produced for each social category and plot these as a bar graph. <a href="https://www.jove.com/CDNSource/lm/labs/36/Table_2_Eusociality_and_division_of_labor.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="2-6"><div class="lab-step">Next, use Hamilton&#39;s equation to analyze the data. To do this, set r equal to the degree of relatedness, B to the class average eusocial fitness, and C to the class average solitary fitness.  r * B > C
</div></li><li data-sub-note-item="2-7"><div class="lab-step">Use these results to determine if altruistic behavior should persist in your eusocial honeybee group. Discuss the variables in Hamilton&#39;s equation that may contribute to this observation. Consider circumstances under which you would expect to see different results. 
</div></li></ul></li></ol>

Eusocialidad y división del trabajo

Simulating Eusocial and Solitary Behavior
ExpandNote: In this simulation, you will portray either a eusocial or solitary animal. The goal of this ...

Educación

JoVE Lab Manual

Biología

Ecología

Lab Manual Sub Articles

Extinction

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Diversity and Extinction during the Paleogene Epoch
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">Begin this procedure by reading the extinction reading supplement that has been printed out for you. <br /><strong>NOTE:</strong> Alternatively, you may download the reading supplement at the link below.&nbsp; <a href="https://www.jove.com/CDNSource/lm/labs/24/Lab_20_Reading Supplement.docx" style="display:block;margin:20px;" target="_blank">Click here to download the extinction reading supplement</a>
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Using the information contained in the extinction reading supplements pertaining to the taxa of interest and the Chicxulub impact event, make predictions for each taxon listed in Table 1. Consider whether diversity in each taxon increased, decreased, or stayed the same immediately following the Cretaceous-Paleogene boundary and later on in the Paleogene epoch. <a href="https://www.jove.com/CDNSource/lm/labs/24/Table_1_Extinction.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Then, fill out the reasons for each of your predictions in the Contributing Factors column. HYPOTHESES: The experimental hypothesis is that many of the different taxa will show changes in diversity after the Cretaceous-Paleogene event, and again at the end of the Paleogene, with some increasing in diversity, while others decrease. The null hypothesis is that there will be no changes in diversity between taxa following the Cretaceous-Paleogene event, or at the end of the Paleogene.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Gather diversity data by going to the Paleobiology Database: <a href="http://www.paleobiodb.org" target="_blank">www.paleobiodb.org</a>.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">In the center of the screen, click the yellow box labeled Download Data. Under the italicized heading, &#8220;What do you want to download?&#8221;, select Diversity over time on the left side and Comma-separated values on the right side.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Scroll down to the heading &#8220;Select by taxonomy&#8221;.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">In the first box labeled 'Taxon or taxa to include', type in the name of the taxon that data is being gathered on.  NOTE: Ensure the spelling is correct.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Now, go to the dropdown menu right below that box labeled &#8220;Taxonomic resolution&#8221;, and select genera.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Under the next heading, Select by time, type Maastrichtian into the first box and Chattian in the box directly below. Make sure the dropdown menu labeled Time rule is set to major and the Temporal resolution is set to stage.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">Select &#8220;Assume extant taxa range through to present&#8221;. Scroll back up to the middle of the page and click download. A save window will open.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">Save the .csv file to a safe and accessible place and rename it to make it easy to identify.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Open the file and scroll down to the main dataset under Records.  NOTE: The data are arranged in reverse time order by geological stage. The second column, interval_name, gives the accepted name of the stage in question. The next two columns give the appropriate dates of the stage in millions of years before the present. The final column, number of occurrences, gives a total count of the genera extant during that geological stage as determined from occurrence of fossils.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">To more easily work with this data, copy and paste each column into a new sheet. Be sure to label this sheet with the taxon in question, the data and time the data were obtained, and the data source.
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Repeat this process for each of the taxa in Table 1 (steps 4 &#8211; 12). NOTE: Data from multiple taxa can be kept on the same sheet, so long as they are kept distinct and labeled appropriately.
</div></li><li data-sub-note-item="1-15"><div class="lab-step">To create line plots for each of the taxa showing the change in diversity over time, select the max_ma column and the number of occurrences column simultaneously.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">In Excel, select Insert from the top toolbar and find the section labeled Charts. Select the bottom center icon, Insert Scatter Chart.
</div></li><li data-sub-note-item="1-17"><div class="lab-step">Then, select the Scatter with Straight Lines and Markers and a graph should appear. NOTE: Since the axis of this graph is in units of millions of years ago, the axis is in the reverse direction of time when put in numerical order.
</div></li><li data-sub-note-item="1-18"><div class="lab-step">To fix this, click on the green plus sign in the top-right corner of the graph and hover over Axes. This should reveal a small black arrow. Click the arrow to open up a small menu and select More Options.
</div></li><li data-sub-note-item="1-19"><div class="lab-step">This will open the Axis Options menu. Under Axis Options, click the box next to Values in reverse order. NOTE: It is also possible to change the axis scales from this menu, which can be used to eliminate the excess time that is not being analyzed in this lab. Keep any changes consistent between different graphs.
</div></li><li data-sub-note-item="1-20"><div class="lab-step">Double-click on the title at the top of the graph and change it to the taxon being represented.
</div></li><li data-sub-note-item="1-21"><div class="lab-step">Make a separate graph for each of the taxa in Table 1. Keep them organized and in one location. A separate sheet for graphs is recommended.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">For each graph, identify the location of the Cretaceous-Paleogene boundary and draw a vertical line through the graph at this point.
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Using the information from the graphs, fill out Table 2. In some cases, it may be helpful to go back to the original dataset and compare actual values, particularly when they are small. <a href="https://www.jove.com/CDNSource/lm/labs/24/Table_2_Extinction.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Compare these values to the predictions made in Table 1 and discuss if the original contributing factors are still likely candidates.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Using the dataset, calculate the percentage of total taxa that went extinct over the Cretaceous-Paleogene boundary using this equation.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">There is an event in the middle of the Paleogene known as the Paleocene-Eocene Thermal Maximum about 55.5 million years ago. This represents a high point in temperature during the Paleogene epoch at approximately 8 &#176;C higher than today&#39;s average temperature. Does this point seem to have an effect on diversity for any of the taxa? If yes, then which ones?
</div></li></ul></li></ol>

Extinction: Diversity and Extinction during the Paleogene Epoch - Procedure

Extinción

Diversity and Extinction during the Paleogene Epoch
ExpandBegin this procedure by reading the extinction reading supplement that has been printed out for ...

Group Behavior

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">The Hawk-Dove Game
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">NOTE: In this activity, you will play the hawk and dove game with a single partner and then with multiple partners to observe hypothetical costs and benefits of the antagonist or cooperative behavior respectively. 
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Before the activity starts, review the cost-benefit table so that you understand how to score the game. <a href="https://www.jove.com/CDNSource/lm/labs/33/Table_1_Group_behavior.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="1-3"><div class="lab-step">HYPOTHESES: The experimental hypothesis for this exercise could be that the dove strategy will become more frequent between repeated partners, and the hawk strategy will become more frequent when interactions are with a variety of partners. The null hypothesis could be that there will be no change in strategy over time with repeat or different partner combinations. NOTE: Benefit can be determined by looking at the left column and choosing the row that corresponds to the card you played. The box that corresponds to the choice of your partner can be found in the top row. For the purposes of this game, B equals four and C equals three. So depending on the cards played, player one here, which is you, would gain a score of two, four, zero or one half. 
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Collect a set of two game cards. 
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Take out the cards labeled hawk and dove and place them face down on the table or conceal them in your hands. 
</div></li><li data-sub-note-item="1-6"><div class="lab-step">When the instructor gives the signal show either of the two cards to the student sitting across from you. Try to strategize how to receive the highest benefit from every interaction on your own but do not communicate with your partner. 
</div></li><li data-sub-note-item="1-7"><div class="lab-step">In the Single Partner Recording Table (Table 2) provided by your instructor, note the cards played as well as the benefit you received for that round.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Repeat showing cards to the same partner and determining benefit on your instructor&#39;s signal for a total of 15 rounds.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">At the end of those rounds, the student with the highest total benefit value was determined to be the &#8220;winner&#8221;, or the most fit.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">As a class, determine the percentages of hawks and doves played as well as the average benefit received for each round, using this formula: Class average benefit=(sum total benefit)/(number of players)
</div></li><li data-sub-note-item="1-11"><div class="lab-step">For the second game, and then for each round of play, one row of students should rotate to their right, leaving all players with a new partner.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Continue playing for 15 rounds or until students end up back in their starting positions, recording the data in the Multiple Partner Recording Table (Table 3) given to you by your instructor.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">For each round, determine the percentages of hawks and doves played that round, as well as the average benefit received.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Cheating and Cooperation Exercise
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">NOTE: In this activity, you will exchange benefits, represented by colored or similar items, with your classmates. In this simulation, a cheater is defined as a person who gives fewer benefits than they receive. During this activity, you will observe the frequency of cheating behavior over time. 
</div></li><li data-sub-note-item="2-2"><div class="lab-step">HYPOTHESES: The experimental hypothesis is that cheaters will receive fewer benefits over time and cooperators will continue to provide equal benefits to one another. The null hypothesis is that the frequency of cheaters and cooperators does not change over time. 
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Each person should collect beads of one color to represent a tangible benefit, as well as one paper bag and a three-ring binder.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Get into a group of three so that all members have objects of the same color.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Now find another group with a different color to pair with. In each round, partners will exchange benefits without knowing what they are receiving from their partner and without discussion within their group.  NOTE: Benefits of a different color from your starting color are worth twice as much.
</div></li><li data-sub-note-item="2-6"><div class="lab-step">Turn face to face with a member from the other group while still being able to conceal the objects in your possession.  TIP:<strong> </strong>Setting up a screen using a notebook or sitting behind a desk can be helpful here.
</div></li><li data-sub-note-item="2-7"><div class="lab-step">When given a signal from the instructor, place zero to two benefits into the paper bag and pass it to your partner.
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Simultaneously, receive the bag from your partner and then remove the benefits from the bag.
</div></li><li data-sub-note-item="2-9"><div class="lab-step">Make a note of how many benefits you gave away and how many you received in the Cheating and Cooperation Table (Table 4) provided by your instructor.
</div></li><li data-sub-note-item="2-10"><div class="lab-step">Turn to a new member from the other group and repeat the exchange.
</div></li><li data-sub-note-item="2-11"><div class="lab-step">Rotate through all of the members of the other group for as many rounds as the instructor determines - which will not be revealed until the game ends so as not to alter player behavior.
</div></li><li data-sub-note-item="2-12"><div class="lab-step">Once the game has ended, note for each round in the cheating and cooperation table whether you gave more than your partner, received more from them or if you gave the same amount.
</div></li><li data-sub-note-item="2-13"><div class="lab-step">Now total up all of the benefits in your possession, with benefits you&#39;ve received from the other group being worth twice as much.
</div></li><li data-sub-note-item="2-14"><div class="lab-step">For each round, the whole class should total up the number of cheaters - with cheaters defined as those who gave less than they received.
</div></li></ul></li><li data-note-item="3" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="3-1"><div class="lab-step">For both the single partner hawk-dove game and the multiple partners hawk-dove game, use the whole class data to plot the percentages as two separate lines - one for the percentage of hawks, and one for the percentage of doves, for each of the 15 rounds.
</div></li><li data-sub-note-item="3-2"><div class="lab-step">Take note of whether the cards played changed as more rounds were played.
</div></li><li data-sub-note-item="3-3"><div class="lab-step">Manipulate the values for B and C to see if you can find the point at which values of B and C would render the hawk strategy no longer effective (this would be the point when there is no benefit to choosing the hawk strategy over always choosing the dove strategy).
</div></li><li data-sub-note-item="3-4"><div class="lab-step">As a class, use the data from the cheating and cooperation activity to make a graph showing the percentage of rounds each individual player cheated versus the amount of benefits they ended with.
</div></li><li data-sub-note-item="3-5"><div class="lab-step">Consider whether it is better to be a cheater or a cooperator in this scenario and discuss as a class what makes this scenario different from the hawk-dove game.
</div></li><li data-sub-note-item="3-6"><div class="lab-step">Now, use the class data to graph the percentage of cheaters against the number of rounds, and look for any trends over time.
</div></li><li data-sub-note-item="3-7"><div class="lab-step">Consider which type of strategy would most likely evolve in a setting where partners interact repeatedly.
</div></li><li data-sub-note-item="3-8"><div class="lab-step">Then, note which tactic might be beneficial for a species that relies on cooperation. 
</div></li><li data-sub-note-item="3-9"><div class="lab-step">Discuss as a class what would likely happen if you increased or decreased the relative value of the benefits you receive.
</div></li></ul></li></ol>

Group Behavior: Hawk-Dove Game and Trading Exercise - Procedure

Comportamiento grupal

The Hawk-Dove Game
ExpandNOTE: In this activity, you will play the hawk and dove game with a single partner and then with multiple partners to observe ...

Optimal Foraging

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Simulating Foraging with Artificial Habitats and Prey
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">NOTE: The foragers will hunt for prey represented by pinto beans in four buckets of rice with varying prey densities. Without knowing what these densities are, foragers must obtain as many prey items as possible in as little time as possible. 
</div></li><li data-sub-note-item="1-2"><div class="lab-step">HYPOTHESES: In this experiment, the experimental hypothesis could be that foragers will catch the most prey in the higher prey density bucket and also spend the most time foraging there.  The null hypothesis would then be that foragers will catch an equal number of prey in each bucket and that foragers will spend an equal amount of time foraging in each patch. 
</div></li><li data-sub-note-item="1-3"><div class="lab-step">To begin the foraging activity, record the names and role of each participant at the top of the student data collection sheet.  NOTE: Before starting the experiment, the forager is allowed to become familiar with the foraging process &#8211; the following steps are a practice round. 
</div></li><li data-sub-note-item="1-4"><div class="lab-step">The forager should kneel or sit in front of the average density bucket. 
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Once the timer says start, the forager may begin looking for the pinto beans representing the prey. The forager can spend as much time as they like foraging in this bucket. 
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Once a prey item is located, the forager must signal that one has been found and place the prey in the cup next to the bucket.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Once they believe they have acquired most of the prey in the patch, they should tell the timer to stop the time and the practice round is over. 
</div></li><li data-sub-note-item="1-8"><div class="lab-step">To begin the simulation proper, the forager should sit or kneel in front of bucket A. 
</div></li><li data-sub-note-item="1-9"><div class="lab-step">The timer must be ready to start the stopwatch. 
</div></li><li data-sub-note-item="1-10"><div class="lab-step">The recorder should be ready to record the time each prey item is located, in addition to the time that the forager arrived at and left each bucket. 
</div></li><li data-sub-note-item="1-11"><div class="lab-step">When all parties are ready, the timer should start the stopwatch and say &#8220;start&#8221;,  and the forager should begin foraging. NOTE: The stopwatch will run through the rest of the round for buckets B and C.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">As the forager signals finding pinto beans and places them in the cup next to the bucket, the timer should tell the recorder the time.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">The recorder should then write the time in the student data collection sheet.  <a href="https://www.jove.com/CDNSource/lm/labs/34/Table_1_Optimal_foraging.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Once the forager has decided to move on to the next bucket, they should tell the timer &#8220;done&#8221;, and begin moving to the next patch. 
</div></li><li data-sub-note-item="1-15"><div class="lab-step">The recorder should record the time the forager left and the time they arrived at bucket B in the student data collection sheet.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">Repeat the same procedure for buckets B and C. Once the forager has completed the activity, it is time for the next forager to begin using the same procedure. 
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">Before performing any data analysis, review the data collection sheet and compile your individual data for captured prey, foraging time, and travel time for each bucket in your student calculations table. <a href="https://www.jove.com/CDNSource/lm/labs/34/Table_2_Optimal_foraging.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="2-2"><div class="lab-step">After this, calculate your individual capture rate for each bucket by dividing the number of prey captured by the sum of the foraging time and travel time and record these values in your table. Individual capture rate =  Number of prey captured / (foraging time + travel time)
</div></li><li data-sub-note-item="2-3"><div class="lab-step">To calculate your Giving-Up-Time or a GUT for each bucket, subtract the time that the last prey item was acquired from the time you left the bucket.  GUT = time forager left bucket  -  time last prey item acquired
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Next, calculate the mean GUT for your foraging group and record the values in your table.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Finally, calculate your scaled GUT for each bucket by dividing the bucket GUT by your group&#39;s mean GUT. Scaled GUT =  Bucket GUT / Group mean GUT NOTE: The scaled GUT will allow class data to be pooled later on without differences in individual foragers skewing the data. 
</div></li><li data-sub-note-item="2-6"><div class="lab-step">The instructor should now compile the data into the classroom spreadsheet.  <a href="https://www.jove.com/CDNSource/lm/labs/34/Table_3_Optimal_foraging.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 3</a>
</div></li><li data-sub-note-item="2-7"><div class="lab-step">Plot a bar graph of the average number of prey collected in each bucket. On the x-axis, A should represent the low prey density bucket, B should represent the medium prey density bucket, and C the high prey density bucket. Plot the y-axis as the number of prey items caught. 
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Next, plot the graph of the class average scaled GUT, where the x-axis represents the buckets with varying levels of prey density and the y-axis shows the values for the average scaled GUT. 
</div></li><li data-sub-note-item="2-9"><div class="lab-step">Plot a third graph of the average time spent foraging in each bucket. 
</div></li><li data-sub-note-item="2-10"><div class="lab-step">Now review the Marginal Value Theorem (MVT) from the concepts video and examine the three graphs that you generated from your class data. Take note of whether the graphs conform to the predictions of MVT. 
</div></li></ul></li></ol>

Optimal Foraging: Foraging with Artificial Habitats and Prey - Procedure

Forrajeo óptimo

Simulating Foraging with Artificial Habitats and Prey
ExpandNOTE: The foragers will hunt for prey represented by pinto beans in four buckets of rice with ...

Sexual Selection and Mate Choice

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Sexual Selection Class Simulation
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">Note: In this activity, you and your classmates will portray a sexually reproducing population consisting of an equal number of male and female animals. You will simulate several different mating scenarios to determine how relative quality, attractiveness, sex, and parental commitment affect mate choice and reproductive success. The goal of this activity is to maximize your progeny. 
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Hypotheses: There are several overall hypotheses for female and male behavior for this activity. The main experimental hypothesis for female behavior is that females will mate with males of high quality more frequently than those of low quality, yielding a higher reproductive success. The null hypothesis is that females will not demonstrate preference towards high- or low-quality males in any of the four rounds of mating. For males, one experimental hypothesis is that males with a higher visible score will have greater reproductive success. Another could be that males will be more selective for females in scenarios in which they join females to care for offspring as opposed to scenarios in which they exhibit no parental commitment. The null hypothesis for male behavior might be that males will not demonstrate preference towards high- or low-quality females in any of the four rounds of mating. 
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Activity Overview: To begin, each student will be assigned a sex as well as a relative quality and attractiveness score. Remember - the goal is to maximize your reproductive success in each round. You do this by mating with partners of the highest possible quality which is rated on a scale of one to three with three being the highest possible score. Attractiveness scores, which follow the previously described scoring paradigm, correlate with quality but do not exactly predict the score. Though useful, they are not a perfect way to choose the best mate.  If you are assigned a male ID holder, you will have 16 gametes. However, if you are assigned a female ID holder, you will only have four. A successful mating occurs when one sperm and one egg are paper-clipped together and deposited at the fertilization area. 
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Note - Rules of the activity: 
<ul>
	<li>Assigned male and female identities for these experiments are not representative of students&#39; personal gender identities. </li>
	<li>Running is not permitted. </li>
	<li>Talking is not permitted.</li>
	<li>Hidden values cannot be shared but individuals can attempt to hide their visible scores. </li>
	<li>Respect the space around each individual and remain an arm&#39;s length away. </li>
	<li>Offspring will only be counted towards an individual score if both gametes are paper-clipped together and dropped off in the designated fertilization area before the end of the two-minute round. </li>
</ul>
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Round 1 &#8211; Hidden Quality Score
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">To begin the first simulation, take the clip-on ID holder you were randomly assigned and make sure it contains four gametes if you are assigned female or sixteen gametes if male. Males should also have a strip of white paper and two paperclips. 
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Next, males should paperclip the white strip of paper over their quality score to hide it, but keep the attractiveness score visible. 
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Record your ID number for round one in table two.  <a href="https://www.jove.com/CDNSource/lm/labs/35/Table_2_sexual_selection.xlsx" style="display:block;margin:20px;" target="_blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Next, clip on the ID holder and move to the designated mating area. 
</div></li><li data-sub-note-item="2-5"><div class="lab-step">When the instructor says begin, you may commence the mating simulation. You will have exactly two minutes to produce as many offspring as possible. Males may freely give their sperm to females, and females may choose to use these sperm immediately after which they would walk to the fertilization area and paperclip it to one of their eggs, or they may choose to wait until they receive other sperm to do so. 
</div></li><li data-sub-note-item="2-6"><div class="lab-step">Once the gametes have been deposited in the fertilization area, females may resume mating. 
</div></li><li data-sub-note-item="2-7"><div class="lab-step">When the two minutes have elapsed, all matings must stop and any gametes not in the fertilization area at this time will not be counted. 
</div></li><li data-sub-note-item="2-8"><div class="lab-step">The instructor should now tally all of the matings and record the numbers of the individuals who produced each offspring.
</div></li><li data-sub-note-item="2-9"><div class="lab-step">Now, find all the gametes that came with your ID holder and repackage them for the next round. 
</div></li></ul></li><li data-note-item="3" data-parent-collapse="">Round 2 &#8211; Hidden Attractiveness Score
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="3-1"><div class="lab-step">For the second round, obtain a new randomly assigned ID holder and again ensure it contains the proper number of gametes. 
</div></li><li data-sub-note-item="3-2"><div class="lab-step">Next, males should use the paperclip and strip of white paper to hide their attractiveness score (instead of the quality score, which was covered in round one).
</div></li><li data-sub-note-item="3-3"><div class="lab-step">Record the ID number of your clip in table two under round two.  Note: The mating simulation process for round two will be the same as round one.
</div></li><li data-sub-note-item="3-4"><div class="lab-step">Move to the designated mating area and with for the instructor to signal the start of the round. As before, males may freely give away their sperm while females will choose to use it now or wait for different sperm. When a female decides to fertilize an egg, she will walk to the fertilization area and paperclip the gametes together. 
</div></li><li data-sub-note-item="3-5"><div class="lab-step">Proceed with the simulation for two minutes, and at the signal from the instructor all mating activity should stop. 
</div></li><li data-sub-note-item="3-6"><div class="lab-step">The instructor should now tally all of the matings from this second round.
</div></li><li data-sub-note-item="3-7"><div class="lab-step">Now, find and return the gametes to your ID holder, and then return the holder to the instructor.
</div></li></ul></li><li data-note-item="4" data-parent-collapse="">Round 3 &#8211; Visible Quality and Attractiveness Scores
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="4-1"><div class="lab-step">For the third simulation, you should again obtain a new clip-on ID holder and check that it contains the appropriate number of gametes. Record the ID number of your clip in table two.
</div></li><li data-sub-note-item="4-2"><div class="lab-step">For this round, leave both attractiveness and quality scores visible on male IDs. Note: The mating simulation process for round three will be the same as the previous two rounds.
</div></li><li data-sub-note-item="4-3"><div class="lab-step">Move to the mating area and wait for the signal to begin the simulation.
</div></li><li data-sub-note-item="4-4"><div class="lab-step">Once the instructor starts the timer and gives the signal, commence mating. As before, males are allowed to freely give away their sperm to females and females may use the sperm immediately or wait for different sperm. Again, fertilized eggs only count if placed in the fertilization area. 
</div></li><li data-sub-note-item="4-5"><div class="lab-step">After the two-minute time limit, the instructor should tally all matings. 
</div></li><li data-sub-note-item="4-6"><div class="lab-step">Now, find and return the gametes to your ID holder, and then return the holder to the instructor.
</div></li></ul></li><li data-note-item="5" data-parent-collapse="">Round 4 &#8211; Increased Male Parental Care
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="5-1"><div class="lab-step">In the final round, males will again leave their attractiveness and quality scores visible. 
</div></li><li data-sub-note-item="5-2"><div class="lab-step">Obtain an ID holder and ensure it contains the appropriate number of gametes. 
</div></li><li data-sub-note-item="5-3"><div class="lab-step">Clip on the ID holder and move to the mating area. Note: As before, males may freely give away their sperm to females. However, in this round, once a female chooses to mate with a male, both the male and female will walk to the fertilization area to paperclip their gametes together. After placing the paper-clipped gametes on the table, both male and female actors may return to the mating area. 
</div></li><li data-sub-note-item="5-4"><div class="lab-step">The instructor should signal the start of the round and begin the timer &#8211; at this point participants can begin the simulation.
</div></li><li data-sub-note-item="5-5"><div class="lab-step">Once the two-minute time limit is up, all matings must stop. 
</div></li><li data-sub-note-item="5-6"><div class="lab-step">The instructor should tally all mating events.
</div></li><li data-sub-note-item="5-7"><div class="lab-step">Find and return the gametes to your ID holder. Give your ID holder to the instructor and notify them if any gametes or supplies are missing. 
</div></li></ul></li><li data-note-item="6" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="6-1"><div class="lab-step">To analyze the data generated during the mating activities, first split up into groups of four. 
</div></li><li data-sub-note-item="6-2"><div class="lab-step">Collect the class data from the instructor for ONE of the four rounds of mating. Note: In this activity, there were several types of females and males distinguished by different letters. These letter types correspond to specific combinations of quality and attractiveness scores. In the compiled data, the average number of matings and reproductive success has already been sorted by letter type for you by the instructor. 
</div></li><li data-sub-note-item="6-3"><div class="lab-step">Use these data to generate four graphs for the round you were assigned. First plot two graphs for the average number of matings against female and male type. 
</div></li><li data-sub-note-item="6-4"><div class="lab-step">Then plot the reproductive success for males and females against male or female type, giving a total of four graphs.
</div></li><li data-sub-note-item="6-5"><div class="lab-step">Once these graphs are complete, each group should present their data to the class, making sure to state the original hypothesis for your assigned round and whether or not the hypothesis was upheld.
</div></li><li data-sub-note-item="6-6"><div class="lab-step">After each group presents, discuss the overall results of the four rounds together. 
</div></li><li data-sub-note-item="6-7"><div class="lab-step">Note the affect that hiding the quality score had on the overall quality of mates chosen.
</div></li><li data-sub-note-item="6-8"><div class="lab-step">Note how hiding or revealing the attractiveness score affected the results.
</div></li><li data-sub-note-item="6-9"><div class="lab-step">Discuss the effect of male parental investment on the number and overall quality of mating pairs.
</div></li></ul></li></ol>

Selección sexual y elección de pareja

Sexual Selection Class Simulation
ExpandNote: In this activity, you and your classmates will portray a sexually reproducing population consisting of an ...

Evolutionary Relationships

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Forming an Evolutionary Hypothesis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">NOTE: A cladogram is an important tool for forming an evolutionary hypothesis. A cladogram is a tree-shaped chart used to depict the hypothetical genealogical relationships between species. The tips or leaves of the chart represent specific species and the branches of the tree are different lengths. The different lengths represent the degree of change between each of the species. The common ancestor of all of the species that a specific line branches from is located at a node, where the branches intersect. Species that share a node are called a sister group.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">To begin, look at the provided blank cladogram and make a hypothesis about where the assigned animals should be placed on the tree. If a blank cladogram has not been provided please <a target="_blank" href="/files/ftp_upload/10562/Blank_Cladogram.png">download one here</a>.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Next, observe the image of the fossilized animal.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Using the morphology, or physical characteristics, of the fossil, make a hypothesis about where on your cladogram it should be placed. Add a new line or mark to indicate your proposed position for the fossil.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Comparing Gene Sequences Using BLAST
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">NOTE: Historically, cladograms have been constructed through the comparison of morphology. Now, genetic sequences can also be compared between species of interest to construct cladograms. DNA sequences are not usually preserved in fossils, so for this lab you will use the BLAST database to compare the DNA sequences of living species that are closely related to the fossil to thousands of other living species.
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Before beginning this lab, your instructor will have downloaded the three preserved gene sequences to a folder on your desktop.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Navigate to the BLAST homepage, which the instructor should have left open in your browser, and click on Saved Strategies from the menu at the top of the page.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Click Open on the Evolutionary_Relationships_Gene1.txt file.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Then, click View to go to the Standard Nucleotide BLAST search page. You should be able to see the DNA sequence in the Query Sequence box at the top-right of the screen.
</div></li><li data-sub-note-item="2-6"><div class="lab-step">Scroll to the bottom of the screen and click the BLAST button. Note: It will take a few moments to process and analyze the data. 
</div></li><li data-sub-note-item="2-7"><div class="lab-step">When the data has been processed, a graphic summary will appear.  NOTE: Your query sequence is represented by the blue line at the top of the box. Each of the lines below the blue line represents another sequence in the BLAST database that matches your query. The length and location of these bars represent where and how much of the sequence match up to the query. The color of the bar represents its score, or how identical the sequence is to the query. Below the graphic summary is the Sequences producing significant alignments list, which contains descriptions of the DNA sequences retrieved from the database that most closely align with the query sentence. These are listed in descending order, from the most similar at the top to the least similar at the bottom. On the right, there are several statistics on how closely related each database sequence is to the experimental sequence. The higher the Max, Total, Query Coverage, and Identity scores are, the more similar the query and retrieved sequences are to each other. Similarly, the lower the E value number, the less likely the sequences match was found by random chance and more significantly the alignment is accurate. An E value of 0 indicates a highly significant match.
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Click on the name of the description of the most similar alignment listed. This will take you further down the page to the exact DNA sequence alignment between the retrieved sequence and the query sequence.
</div></li><li data-sub-note-item="2-9"><div class="lab-step">Click on the Sequence ID number. This will open a new tab with more specific information on the retrieved gene sequence.
</div></li><li data-sub-note-item="2-10"><div class="lab-step">Identify and record the scientific and common names of the organism, which should be listed next to Source.
</div></li><li data-sub-note-item="2-11"><div class="lab-step">Identify and record the protein that the gene codes for, which should be listed next to Definition.
</div></li><li data-sub-note-item="2-12"><div class="lab-step">Close the tab and hit Back to return to the Sequences producing significant alignments list.
</div></li><li data-sub-note-item="2-13"><div class="lab-step">Then, repeat steps 7 &#8211; 9 for the next most similar sequences.
</div></li><li data-sub-note-item="2-14"><div class="lab-step">After collecting several species names, return to the Sequences producing significant alignments list and click Select: All to check all of the boxes next to the names of each listed alignment sequence.
</div></li><li data-sub-note-item="2-15"><div class="lab-step">Click on Distance of tree results to create a phylogram based on the similarity of all of the BLAST result gene sequences to the query gene sequence.  Note: Your query fossil relative sequence will be highlighted in yellow.
</div></li><li data-sub-note-item="2-16"><div class="lab-step">Record your sequence&#8217;s location in relation to the other taxon groups shown in the tree.
</div></li><li data-sub-note-item="2-17"><div class="lab-step">Finally, return to the Saved Strategies tab and upload the next saved gene sequence.
</div></li><li data-sub-note-item="2-18"><div class="lab-step">Query the remaining two fossil relative DNA sequences as previously demonstrated (steps 1 &#8211; 16).
</div></li></ul></li><li data-note-item="3" data-parent-collapse="">Data Analysis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="3-1"><div class="lab-step">Based on your gene sequence results, come up with a second hypothesis about where your fossil specimen fit in the original cladogram.
</div></li><li data-sub-note-item="3-2"><div class="lab-step">Compare this placement with your first hypothesis.
</div></li><li data-sub-note-item="3-3"><div class="lab-step">Compare your tree with your classmates&#8217;. If any of your classmates put the fossil on a different branch, ask them how they came to that decision.
</div></li></ul></li></ol>

Evolutionary Relationships: Using BLAST to Test Evolutionary Hypotheses - Procedure

Relaciones evolutivas

Forming an Evolutionary Hypothesis
ExpandNOTE: A cladogram is an important tool for forming an evolutionary hypothesis. A cladogram is a tree-shaped chart ...

Evolución

Energy Dynamics

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Caterpillar Energy Dynamics
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">NOTE: In this lab you will grow caterpillars in conditions with and without food to examine the transfer of biomass in a typical trophic system.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Weigh and record the wet mass of enough leaves of cabbage to line the bottom of a plastic tub.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Then, collect two batches of five caterpillars from their cabbage habitat, and weigh and record the wet mass of each batch separately in individual weigh boats. Make sure to tare the balance before each measurement. HYPOTHESES: The experimental hypothesis is that only a fraction of energy will be transferred between the trophic levels of the cabbage and the caterpillars and a significant amount will be lost as waste and heat energy. The null hypothesis is that there will be no significant difference between the energy input from the cabbage, and the obtained energy stored as biomass in the caterpillars.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Place the weighed cabbage and five caterpillars in a plastic tub lined with damp paper towels, leaving the lid slightly cracked open for ventilation, but not wide enough for the animals to escape.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Place the other five caterpillars in a second clean container prepared the same way, but with no cabbage.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">After three days, transfer the caterpillars to new weigh boats, and weigh and record the final wet mass of both groups of caterpillars and the cabbage.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Then place the caterpillar waste, or frass, and cabbage into two separate dishes, and put both dishes into a 37 &#176;C incubator to dry for 48 hours.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Euthanize the weighed caterpillars by putting them into a minus 20 &#176;C freezer for 24 hours.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Then, transfer the dishes to a 37 &#176;C incubator for 48 hours.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">After drying, weigh and record the dry mass of the uneaten cabbage, the two groups of caterpillars, and the frass, and use these data to calculate the percent biomass of the caterpillars.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">Finally, discard all of the dried organisms and plates into the hazardous waste bin, and wipe down your workspace with 70% ethanol.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">Take a look at the data you collected. Ensure the initial wet mass, the final wet mass, and the final dry mass columns are accurately filled out in your table. <a href="https://www.jove.com/CDNSource/lm/labs/13/Table_1_Energy_Dynamics.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="2-2"><div class="lab-step">NOTE: Remember an object&#39;s biomass is equal to its dry mass. Therefore, percent biomass for each group is the final dry mass divided by the final wet mass times 100. For example, obtain the percent biomass of the cabbage by dividing the final dry mass by the final wet mass and multiplying by 100. This means that approximately 15% of the cabbage&#39;s total weight is biomass.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">After this, estimate the initial biomass of the cabbage and caterpillars by multiplying the percent biomass by the initial wet mass, and put the values in this new table. NOTE: Remember, biomass equals dry mass. Therefore, the final dry mass is equal to the final biomass of each group.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">To calculate the approximate initial and final energy in the form of kilocalories within the cabbage, caterpillars, and frass, multiply the biomass values recorded in your table by the conversions, and record the calculated values in the table. <a href="https://www.jove.com/CDNSource/lm/labs/13/Table_2_Energy_Dynamics.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="2-5"><div class="lab-step">After this, subtract the initial energy from the final energy to obtain the change in energy for each group.
</div></li><li data-sub-note-item="2-6"><div class="lab-step">NOTE: The negative sign denotes loss in energy, and positive indicates gain.
</div></li><li data-sub-note-item="2-7"><div class="lab-step">Using your data table, calculate the energy in kilocalories that the fed caterpillars lost to respiration. The formula is the energy gained from cabbage, which is the positive of the energy lost by cabbage, minus the biomass gained from cabbage, minus the energy lost via frass. <a href="https://www.jove.com/CDNSource/lm/labs/13/Table_3_Energy_Dynamics.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 3</a>
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Then, repeat the same calculation for the unfed group of caterpillars. Make another column in the table and note this down.
</div></li><li data-sub-note-item="2-9"><div class="lab-step">Finally, add up all of the energy gained via biomass and cabbage consumption, and the energy lost via frass and respiration for each group of caterpillars. NOTE: For both groups of caterpillars the net energy is zero, meaning that this experiment obeyed the first law of thermodynamics.
</div></li></ul></li></ol>

Studying Energy Dynamics and Productivity - Procedure

Dinámica de la energía

Caterpillar Energy Dynamics
ExpandNOTE: In this lab you will grow caterpillars in conditions with and without food to examine the transfer of biomass in a ...

Animal Behavior

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Making Choice Chambers
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">Before beginning the experiments, use one of the Sharpies from the lab table to trace a line around the circumference of the bottom of both bottles. One line should be 1 cm from the base of the bottle and the other should be 1.5 cm from the base of the bottle.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Use a razor blade to make a small cut in each bottle at the mark. 
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Then, insert the scissors and carefully cut along the line until the bottoms of the bottles are removed completely.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Fit one bottle bottom into the other.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Tape the bottles together to make a secure chamber.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Use the razor blade and scissors to poke a hole into the center of the chamber. 
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Take a piece of tape and fold the edge onto itself to make a tab and place the tape over the hole.  Note: The tab helps with easy removal and reattachment of the tape to the chamber.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Use the Sharpie to label one side of the chamber A and the other side B.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Upon receiving the colony of <em>Drosophila</em>, perform a count to make sure there are 40 living individuals in the vial.
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Geotaxis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">To perform a geotaxis assay, first attach a clean, empty bottle cap to each end of the choice chamber and turn the fly vial upside down onto its lid.
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Open the tape flap in the center of the choice chamber.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Insert the funnel into the hole and tap all of the flies into the chamber. HYPOTHESES: The alternate hypothesis is that more flies will be moving against gravity, or up, regardless of the orientation of the choice chamber. Alternatively, if the flies are positively geotactic, then more flies will move down, or with gravity. The null hypothesis is that the flies will have no preference with regard to gravity and will move randomly within the chamber. 
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Once the <em>Drosophila</em> are in the chamber, close the tape flap, rotate the chamber so that it stands vertically with side A on the bottom, and start the timer.
</div></li><li data-sub-note-item="2-5"><div class="lab-step">Immediately, count the number of <em>Drosophila</em> that are moving up and the number that are moving down. Record these data for time point 0 in the table. 
</div></li><li data-sub-note-item="2-6"><div class="lab-step">After 30 seconds, rotate the chamber so that side B is on the bottom and count the number of <em>Drosophila</em> that are moving up or down. Record these data for time point 30 in the table.
</div></li><li data-sub-note-item="2-7"><div class="lab-step">After 60 seconds, rotate the chamber so that side A is on the bottom again and record the number of moving flies for time point 60.  <a href="https://www.jove.com/CDNSource/lm/labs/15/Table_1_Animal_behavior.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 1</a>
</div></li><li data-sub-note-item="2-8"><div class="lab-step">Hold the chamber over the fly vial and carefully open the cap to return all of the <em>Drosophila</em> back to their empty vial. 
</div></li></ul></li><li data-note-item="3" data-parent-collapse="">Phototaxis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="3-1"><div class="lab-step">To perform a phototaxis analysis, first cover side A of the choice chamber with tin foil, taking care that the foil reaches to the exact center between the two sides. 
</div></li><li data-sub-note-item="3-2"><div class="lab-step">Ensure the caps are secured on both ends of the chamber.  HYPOTHESES: In this exercise, the alternative hypothesis is that more flies will be found in the light side of the choice chamber, if the flues are attracted to light, or on the dark side if they are repelled by light. The null hypothesis is that <em>Drosophila</em> will have no preference with regard to either stimulus. Therefore, equal numbers of flies will be found on either side of the choice chamber.
</div></li><li data-sub-note-item="3-3"><div class="lab-step">Open the tape flap in the center of the choice chamber, insert the funnel into the hole, and tap all 40 flies into the chamber as previously described.
</div></li><li data-sub-note-item="3-4"><div class="lab-step">Set the timer to sound an alarm at 10 minutes.
</div></li><li data-sub-note-item="3-5"><div class="lab-step">When the alarm sounds, stop the timer, and count the number of flies in the open side B of the chamber.
</div></li><li data-sub-note-item="3-6"><div class="lab-step">Subtract that number from the total number of flies added to the choice chamber to calculate the number of flies in the covered side A.
</div></li><li data-sub-note-item="3-7"><div class="lab-step">Record these data in the table for time point 10.  <a href="https://www.jove.com/CDNSource/lm/labs/15/Table_2_Animal_behavior.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 2</a>
</div></li><li data-sub-note-item="3-8"><div class="lab-step">Carefully, return all of the flies back to their empty vial.
</div></li></ul></li><li data-note-item="4" data-parent-collapse="">Chemotaxis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="4-1"><div class="lab-step">HYPOTHESES: In this exercise, the alternative hypothesis is that more flies will be found on the side of the chamber with the apple cider vinegar if the flies are attracted to the odor. Or, if the flies are repelled by the vinegar, then more of them will be found on the side of the chamber presenting the odorless water. The null hypothesis is that <em>Drosophila</em> will have no preference with regard to either stimulus and will move randomly in the chamber.  Use an individual disposable plastic pipette to dispense two drops of the apple cider vinegar onto one cotton ball for side A of the chamber. 
</div></li><li data-sub-note-item="4-2"><div class="lab-step">Use an individual disposable plastic pipette to dispense two drops of the distilled water onto a cotton ball for side B of the chamber. 
</div></li><li data-sub-note-item="4-3"><div class="lab-step">Fold two pieces of tape over themselves to create individual pieces of double-sided tape and use the tape to attach each cotton ball to the inside of the single bottle cap.
</div></li><li data-sub-note-item="4-4"><div class="lab-step">Screw the bottle caps with the cotton balls onto their corresponding sides of the chamber.
</div></li><li data-sub-note-item="4-5"><div class="lab-step">Transfer all of the flies into the chamber and set the timer to sound an alarm after 10 minutes. 
</div></li><li data-sub-note-item="4-6"><div class="lab-step">When the alarm sounds, stop the timer and record the number of flies in each side of the chamber. <a href="https://www.jove.com/CDNSource/lm/labs/15/Table_3_Animal_behavior.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Table 3</a>
</div></li><li data-sub-note-item="4-7"><div class="lab-step">At the end of the final experiment, funnel the flies into a morgue tube containing 70% ethanol. 
</div></li><li data-sub-note-item="4-8"><div class="lab-step">Dismantle the choice chambers for recycling.  NOTE: Since all of the chemicals used in these experiments are lab safe, the liquids can be disposed of down the sink, the chambers rinsed, and the solids can be thrown away in the trash. 
</div></li></ul></li><li data-note-item="5" data-parent-collapse="">Results
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="5-1"><div class="lab-step">Gather all of the data collected for the geotaxis, phototaxis, and chemotaxis experiments.
</div></li><li data-sub-note-item="5-2"><div class="lab-step">Plot these values as bar graphs for different conditions and different time points.
</div></li><li data-sub-note-item="5-3"><div class="lab-step">Use these data to draw inferences about the behavior of <em>drosophila melanogaster</em>. 
</div></li></ul></li></ol>

Animal Behavior: Studying Taxis Behavior of Drosophila - Procedure

Comportamiento Animal

Making Choice Chambers
ExpandBefore beginning the experiments, use one of the Sharpies from the lab table to trace a line around the circumference of the ...

Artificial Selection

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Observing Artificial Selection in Plants 
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">To begin the experiment, collect five two-week old grown plants from the generation one population that appear healthy. Note: Plants should appear green, not wilted, and not have damaged leaves. Experimental Hypothesis: The experimental hypothesis for this lab might be that the number of lead trichomes varies naturally, but the average number will increase over generations if only plants with the highest number of trichomes are interbred or decrease if those with the least are interbred. Null Hypothesis: The null hypothesis might be that the average number of trichomes will not change over subsequent generations after artificial selection.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Label each plant with a letter from A to E and with both partners&#8217; names.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Record any natural differences you see between your plant samples. Note: All of the plants are the same age, so any observed variation is due to expressed phenotype, not development.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Use a hand lens to count the number of trichomes found on the petiole of the lowest leaf, not including the round, first-grown cotyledons for each plant. Note: It can be helpful to shine a light onto the plant and to hold it against a dark background, such as a lab bench, during the trichome analysis. 
</div></li><li data-sub-note-item="1-5"><div class="lab-step">Both partners will conduct counts on each plant independently and compare answers. If the counts are different, enlist a third counter or take the average of the two results.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">After this, determine the median number of trichomes for the entire class.  <a target="__blank" style="display:block;padding:20px;" href="https://www.jove.com/CDNSource/lm/labs/2/Lab_2_Table_A.xlsx">Click Here to download Table A</a>
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Determine the top and bottom 10% of the plants from the class trichome count. These groups will make up the two artificially selected lines: high hairiness and low hairiness, respectively.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">If more than 10% of the plants have no trichomes, select 10% of those plants randomly for the low hairiness plant line.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Separate the two groups of selected plants and label them clearly.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">Move the plants to a well-lit area and keep them well watered until they develop flowers. Note: Flowers typically develop around 14 days.
</div></li><li data-sub-note-item="1-11"><div class="lab-step">When the flowers are fully developed, use a pollination wand or paintbrush to rub the stigma and anther of one plant&#8217;s flowers for a few seconds.
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Using the same wand or brush, rub the inside of each flower of every other plant in the same selection line.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">Using a different wand or brush, repeat steps 11 through 12 on the other line. Note: Take care not to cross the lines. Spread the pollen only among the appropriately selected plants.
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Return the generation one plants to the growing areas. When the plants reach approximately 1 month old, they should produce mature seed pods.
</div></li><li data-sub-note-item="1-15"><div class="lab-step">Allow the plants to dry out once the seed pods turn yellow.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">Break the seed pods open and collect the seeds.
</div></li><li data-sub-note-item="1-17"><div class="lab-step">Obtain new pots for the generation two seeds.
</div></li><li data-sub-note-item="1-18"><div class="lab-step">Fill the pots with moist potting soil about halfway and add a fertilizer pellet to each pot.
</div></li><li data-sub-note-item="1-19"><div class="lab-step">Fill the pots with more soil to fill just below the lip.
</div></li><li data-sub-note-item="1-20"><div class="lab-step">Make a shallow depression in the soil of each pot with a probe.
</div></li><li data-sub-note-item="1-21"><div class="lab-step">Touch a clean toothpick to a gluestick and use the toothpick to transplant the seeds into the soil one by one.
</div></li><li data-sub-note-item="1-22"><div class="lab-step">Cover the seeds with a thin layer of soil.
</div></li><li data-sub-note-item="1-23"><div class="lab-step">Label the pots with their hairiness line and place them in the designated growing area.
</div></li><li data-sub-note-item="1-24"><div class="lab-step">Use a plastic dropper to water the plants as needed to ensure they do not dry out.
</div></li><li data-sub-note-item="1-25"><div class="lab-step">When the plants are two weeks old, collect five plants from each line and label them A to E.
</div></li><li data-sub-note-item="1-26"><div class="lab-step">Then, count the trichomes on these plants as previously described (steps 4- 5).
<a target="__blank" style="display:block;padding:20px;" href="https://www.jove.com/CDNSource/lm/labs/2/Lab_2_Table_B.xlsx">Click Here to download Table B</a>
</div></li></ul></li><li data-note-item="2" data-parent-collapse="">Data Analysis
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="2-1"><div class="lab-step">Create a frequency graph based on the generation one class data with the trichome count on the x axis and the number of plants on the y axis. Label the mean. 
</div></li><li data-sub-note-item="2-2"><div class="lab-step">Then, create frequency graphs for both of the selected hairiness lines.
</div></li><li data-sub-note-item="2-3"><div class="lab-step">Compare the frequency graphs for generation one and both hairiness lines.
</div></li><li data-sub-note-item="2-4"><div class="lab-step">Take note of phenotypic shifts observed in the selected hairiness lines.
</div></li></ul></li></ol>

Artificial Selection: Visualization in Plants and Data Analysis - Procedure

Selección artificial

Observing Artificial Selection in Plants 
ExpandTo begin the experiment, collect five two-week old grown plants from the generation one population that ...

Natural Selection

<ol class="note-items"><li data-note-item="1" data-parent-collapse="">Simulating Natural Selection
<button class="expand">Expand</button><ul class="lab-items"><li data-sub-note-item="1-1"><div class="lab-step">To begin, cut the white, black, and gray pipe cleaners into quarters, which should produce a total of 100 pieces that are 3 inches long.
</div></li><li data-sub-note-item="1-2"><div class="lab-step">Then, cut the green pipe cleaners in the quantities and lengths specified in the video, taking care to minimize waste. This approximates a normal distribution of lengths and should result in an additional 100 pieces total. NOTE: One 12-inch pipe cleaner should yield multiple lengths, for example, a 5-inch piece and a 7-inch piece. Use this advantage to reduce waste.
</div></li><li data-sub-note-item="1-3"><div class="lab-step">Now, cut one sheet of black and one sheet of white construction paper into approximately 3-inch strips measured along the long edge of the paper.
</div></li><li data-sub-note-item="1-4"><div class="lab-step">Tape these strips down to cover the base of a dissecting tray to create an alternating pattern of black and white strips. NOTE: In the first simulation, you will use the white, gray, and black pipe cleaner segments against a black and white background to simulate different selection pressures due to predation on a population. You will select your prey using two different strategies, eyes-open and eyes-closed. For each of these strategies, you will perform four rounds consisting of 25 selections, alternating between two partners. After each round you will restore the population back to its original size using the proportions of phenotypes present after selection.
</div></li><li data-sub-note-item="1-5"><div class="lab-step">To begin the first scenario, count out 12 white, 12 black, and 26 gray pipe cleaner segments with your partner. Hypotheses: Here the experimental hypothesis might be that different predation strategies, such as having the eyes open or closed, will result in distinct selection pressures on the populations. Further, different phenotypes may be positively selected in the alternate scenarios. The null hypothesis might be that different predation strategies will have no effect on the populations or phenotypes.
</div></li><li data-sub-note-item="1-6"><div class="lab-step">Mix the pipe cleaner segments together as best as possible. Then, sprinkle them into the papered tray. NOTE: Ideally, the pipe cleaners will be spread out. However, this may not occur due to their self-adhering nature.
</div></li><li data-sub-note-item="1-7"><div class="lab-step">Once the segments are in the tray, separate them as best as possible without moving them too far from where they landed. As few segments as possible should be touching.
</div></li><li data-sub-note-item="1-8"><div class="lab-step">Have the first partner close their eyes. When given an audible signal by the second partner, the first should open their eyes and grab the first pipe cleaner they see from the tray as quickly as possible.
</div></li><li data-sub-note-item="1-9"><div class="lab-step">Set the removed pipe cleaner to the side.
</div></li><li data-sub-note-item="1-10"><div class="lab-step">Alternating partners, repeat this process a total of 25 times (steps 8 &#8211; 9).
</div></li><li data-sub-note-item="1-11"><div class="lab-step">Count the remaining pipe cleaners by color and record this in the data collection table for Scenario 1. <a href="https://www.jove.com/CDNSource/lm/labs/23/Lab_23_Tables_1_and_2.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Tables 1 and 2</a>
</div></li><li data-sub-note-item="1-12"><div class="lab-step">Then, restore the population to 50 by adding one pipe cleaner of the same color for each of the remaining pipe cleaners. Hold these to the side until they are all gathered.
</div></li><li data-sub-note-item="1-13"><div class="lab-step">Then, sprinkle the pipe cleaners into the tray as previously described (steps 6-7). Repeat this process for three more rounds consisting of 25 selections each and record the counts for each of the rounds in the data collection table for Scenario 1.
</div></li><li data-sub-note-item="1-14"><div class="lab-step">Remove all pipe cleaners from the tray after the fourth round.
</div></li><li data-sub-note-item="1-15"><div class="lab-step">For Scenario 2, again count out 12 white, 12 black, and 26 gray pipe cleaner segments and sprinkle them randomly into the tray.
</div></li><li data-sub-note-item="1-16"><div class="lab-step">Follow the same protocol as in Scenario 1. However, when given the signal, the grabbing partner should keep their eyes closed. To aid in accuracy, it may help to position the hand near to the tray before grabbing.
</div></li><li data-sub-note-item="1-17"><div class="lab-step">Repeat this process 25 times, switching partner roles, and record the remaining pipe cleaner amounts in the data collection table for Scenario 2.
</div></li><li data-sub-note-item="1-18"><div class="lab-step">Then, restore the population to 50 based on that count. Do this for all four rounds. NOTE: In the second simulation, you will be using the eyes-open and eyes-closed predation strategies as previously described to select pipe cleaners of various lengths.
</div></li><li data-sub-note-item="1-19"><div class="lab-step">For Scenario 3, gather all 100 of the pipe cleaners that have been cut to varying lengths to represent different phenotypes.
</div></li><li data-sub-note-item="1-20"><div class="lab-step">One partner should hold all the pipe cleaners upright and loosely in one hand resting on the tabletop, such that the bottom end of each pipe cleaner rests against the tabletop.
</div></li><li data-sub-note-item="1-21"><div class="lab-step">Now, the partner that is not holding the pipe cleaners should close their eyes. When given an audible signal, the partner should open their eyes and grab the first pipe cleaner they see from their partner&#39;s hand.
</div></li><li data-sub-note-item="1-22"><div class="lab-step">Repeat this process 50 times (step 21). However, the partners should not switch roles during the round this time. The partner holding the pipe cleaners should always be the one giving the signal and never grabbing from the bunch.
</div></li><li data-sub-note-item="1-23"><div class="lab-step">After the first round consisting of 50 selections, count the remaining pipe cleaners by length. Then, record this information in the data collection table for scenario three. <a href="https://www.jove.com/CDNSource/lm/labs/23/Lab_23_Tables_3_and_4.xlsx" style="display:block;margin:20px;" target="__blank">Click Here to download Tables 3 and 4</a>
</div></li><li data-sub-note-item="1-24"><div class="lab-step">Add one pipe cleaner of the same length as each of the remaining ones to restore the population to 100. This will likely require more pipe cleaners than were originally cut. Try to use scraps from the class to reduce waste.
</div></li><li data-sub-note-item="1-25"><div class="lab-step">Repeat this for three more rounds, alternating which partner holds or grabs each round.
</div></li><li data-sub-note-item="1-26"><div class="lab-step">To perform Scenario 4, gather the varied-length pipe cleaners in their original proportions.
</div></li><li data-sub-note-item="1-27"><div class="lab-step">Now repeat the grabbing process, as described in Scenario 3. However, only remove 30 pipe cleaners instead of 50.
</div></li><li data-sub-note-item="1-28"><div class="lab-step">Divide the count at the end of each round by two for each phenotype 4 inches or below, rounding fractions down.
</div></li><li data-sub-note-item="1-29"><div class="lab-step">Then, record these values in the data recording table for Scenario 4.
</div></li><li data-sub-note-item="1-30"><div class="lab-step">Use the relative proportions of the phenotypes in the final population to restore the population to 100. When restoring the population to 100, it may be necessary to calculate relative proportions of phenotypes.
</div></li><li data-sub-note-item="1-31"><div class="lab-step">Repeat this for three more rounds, again alternating holding and grabbing the pipe cleaners.
</div></li><li data-sub-note-item="1-32"><div class="lab-step">For each scenario calculate the survival for each phenotype, that is the proportion of the phenotype surviving.
</div></li><li data-sub-note-item="1-33"><div class="lab-step">Then, calculate the relative fitness, or w, between each round. As reproductive rate does not vary in this simulation, this should always be considered equal, or 1.
</div></li><li data-sub-note-item="1-34"><div class="lab-step">Also, calculate the selection coefficients for each phenotype.
</div></li><li data-sub-note-item="1-35"><div class="lab-step">Now, use the relative frequencies of each phenotype to create histograms with appropriately labeled axes for each scenario showing the population before any selection took place and then alongside these in a different color after four rounds of selection.
</div></li><li data-sub-note-item="1-36"><div class="lab-step">Identify the type of selection taking place in each scenario and label the graphs. 
</div></li><li data-sub-note-item="1-37"><div class="lab-step">Develop a hypothesis to explain your observations. 
</div></li></ul></li></ol>

Natural Selection: Calculating Fitness and Selection - Procedure

Selección natural

Simulating Natural Selection
ExpandTo begin, cut the white, black, and gray pipe cleaners into quarters, which should produce a total of 100 pieces that ...