JoVE Logo
Centre de ressources universitaires

S'identifier

Prescribed 3-D Direct Writing of Suspended Micron/Sub-micron Scale Fiber Structures via a Robotic Dispensing System

DOI :

10.3791/52834-v

10:36 min

June 12th, 2015

June 12th, 2015

7,722 Views

1Bioengineering Department, University of Louisville

Here, we present a protocol to fabricate freely-suspended, micron/sub-micron scale polymer fibers and “web-like” structures generated via automated direct writing procedure by means of a 3-axis dispensing system.

Tags

Keywords 3D Direct Writing

-- Vues

Vidéos Connexes

article

Fabrication of Uniform Nanoscale Cavities via Silicon Direct Wafer Bonding

article

Writing and Low-Temperature Characterization of Oxide Nanostructures

article

Writing Bragg Gratings in Multicore Fibers

article

A Robotic Platform to Study the Foreflipper of the California Sea Lion

article

Three-Dimensional Ultrasonic Needle Tip Tracking with a Fiber-Optic Ultrasound Receiver

article

Conducting Elevated Temperature Normal and Combined Pressure-Shear Plate Impact Experiments Via a Breech-end Sabot Heater System

article

A Random-displacement Measurement by Combining a Magnetic Scale and Two Fiber Bragg Gratings

article

Design and Implementation of a Bespoke Robotic Manipulator for Extra-corporeal Ultrasound

article

A Rapid Method for Modeling a Variable Cycle Engine

article

Characterization of SiN Integrated Optical Phased Arrays on a Wafer-Scale Test Station

JoVE Logo

Confidentialité

Conditions d'utilisation

Politiques

Recherche

Enseignement

À PROPOS DE JoVE

Copyright © 2024 MyJoVE Corporation. Tous droits réservés.