JoVE Logo
Sportello unico per docenti

Accedi

Nanocrystalline Alloys and Nano-grain Size Stability

Panoramica

Source: Sina Shahbazmohamadi and Peiman Shahbeigi-Roodposhti-Roodposhti, School of Engineering, University of Connecticut, Storrs, CT

Alloys with grain size less than 100 nm are known as nanocrystaline alloys. Due to their enhanced physical and mechanical properties, there is an ever-increasing demand to employ them in various industries such as semiconductor, biosensors and aerospace. 

To improve the processing and application of nanocrystalline alloys, it is necessary to develop close to 100% dense bulk materials which requires a synergistic effect of elevated temperature and pressure. By increasing the applied temperature and pressure, small grains start to grow and lose their distinguished properties. Thus, it is technologically important to reach a compromise between inter-particle bonding with minimum porosity and loss of nano-scale grain size during consolidating at elevated temperatures.

In this study we aim to eliminate oxygen from solid solution to improve the nano-grain size stability at elevated temperatures. Nano-crystalline Fe-14Cr-4Hf alloy will be synthesized in a protected environment to avoid oxide particles formation.

Procedura
  1. File the high purity low oxygen content bulk materials (Fe, Cr and Hf targets) in the glove box using a reciprocating mechanical filing machine in order to minimize oxygen contamination in the starting powders.
  2. Load the powder mixture for a specific alloy (Fe14Cr4Hf wt.% in this study) into a stainless-steel vial along with 440C stainless steel milling balls (Fig. 1). The diameters of the milling balls are 6.4 and 7.9 mm and the ball powder-to-weight ratio is 10:1. The sealed vial needs to be kept under prot

Log in or to access full content. Learn more about your institution’s access to JoVE content here

Risultati

Fig. 3 shows the XRD data for ball-milled OF-Fe14Cr4Hf annealed for one hour at 900°C. There is sharpening of the peaks along with slight peak shifts. It is due to relaxation of lattice strain as the annealing temperature rises. When the annealing temperature rises, several small peaks are revealed between the four major BCC peaks. These would indicate the formation of secondary phases.
Fig. 4a-c shows TEM images and diffraction pattern for OF-Fe14Cr4Hf annealed for 1 hour at

Log in or to access full content. Learn more about your institution’s access to JoVE content here

Tags
Nanocrystalline AlloysNano grain Size StabilitySemiconductor IndustryBiosensors IndustryAerospace IndustryPhysical PropertiesMechanical PropertiesGrain SizeNanocrystalline PowdersElevated TemperatureElevated PressureDense Bulk MaterialsNanograinsInterparticle BondingPorosityFe14Cr4Hf AlloyNanomaterialsMechanical ProcessingThermodynamic PropertiesGrain BoundaryGibbs Free EnergyMechanical Alloying Techniques

Vai a...

0:08

Overview

1:16

Principles of Grain Size Stabilization Mechanisms

4:05

Procedure

5:38

Applications

6:31

Summary

JoVE Logo

Riservatezza

Condizioni di utilizzo

Politiche

Ricerca

Didattica

CHI SIAMO

Copyright © 2024 MyJoVE Corporation. Tutti i diritti riservati