Name: ultrasound-guided microinjection into the mouse forebrain in utero at e9.5
Uploaded: 2010-11-13T17:00:00
Duration: 7 min 47 s
Description: Watch this Scientific Journal Video about Ultrasound-Guided Microinjection into the Mouse Forebrain In Utero at E9.5 at JoVE.com

Part 1. Prepare the Surgical Area
<ol>
<li>If working with biohazardous reagents (e.g. retroviral vectors), the surgery should be performed inside a Biosafety II cabinet (BSC). The ultrasound backscatter microscope (UBM) should sit next to the BSC, with the transducer inside the BSC, and held in place by a motor controlled support on a specially designed surgical stage. The components needed to construct the stage shown in the video are listed on line. This list, together with images of the stage from several angles (available on request), should permit construction.</li>
<li>The opening and closing of the laparotomy (surgical procedure in which the abdominal cavity is cut open to permit access to the internal organs) is usually performed on an absorbent pad with plastic backing. Prior to surgery all of the necessary tools (e.g. razor, surgical scissors, forceps, loaded autoclip applier, etc), and materials (e.g. PBS, sutures, anesthetic, the mouse holder and overlying plate, etc) should be sterilized and placed in the surgical area. Limiting the amount of time the incision is open is important for maximizing the chances of success with the surgery. All animal handling should be performed with gloves that have been disinfected with MB-10 solution, or the equivalent. Repeated disinfection should be performed as needed to assure that the gloves are sterile.</li>
</ol>
Part 2. Mouse Anesthesia
<ol>
<li>Fill a 1 cc syringe with the anesthetic solution containing 1 part Nembutal (50 mg/ml pentobarbital) to 4 parts filtered sterilized 25 mg/ml magnesium sulfate in PBS. This will result in a solution that is 10 mg/ml pentobarbital and 20 mg/ml magnesium sulfate. Each mouse should be weighted individually, and injected with 90 mg of pentobarbital per kg of bodyweight (e.g., a 28 gm mouse would be injected with 250 &mu;L).</li>
<li>Inject into the abdomen (intraperitoneal, IP) of a pregnant mouse at embryonic day (E) 9.5 (can use other ages as needed) penetrating both the skin and abdominal muscle. Allow 8-12 minutes for the mouse to become non-responsive. Adequate anesthesia should be confirmed by the relaxed posture of the animal, and lack of movement in response to tail and toe pinches. Gently pinching between the finger nails is highly sensitive, and lack of any response to such pinching indicates that the animals is sufficiently anesthetized. Note even animals that are completely unresponsive to tail and toe pinches may some times twitch slightly in response to the initial surgical incision. However, this is a reflexive response and does not indicate inadequate anesthesia. Petroleum-based ophthalmic balm should be applied to the eyes of the mouse to avoid drying during surgery.</li>
<li>Set-up the surgical area and the ultrasound machine while waiting for the mouse to become anesthetized. Since the use of retrovirus or lentivirus requires BSL2 containment, as stated above the viral injections should be performed in a Biosafety II Cabinet. In addition, all solutions and disposable materials that comes into contact with the virus should be decontaminated with a 10% bleach solution. The surgical tools and ultrasound equipment should be treated with a sterilizing solution such as MB-10 (<a href="http://www.quiplabs.com/mb10.htm">http://www.quiplabs.com/mb10.htm</a>), or an equivalent used by the facility in question.</li>
</ol>
Part 3. Exposure of the Embryos
<ol>
<li>If possible (depending upon the constraints of the given animal facility and available space) it is preferred to have the surgical preparation area in a separate location from the surgical area. This will minimize the chances for cross-contamination between animals. To initiate the surgery, place the animal onto its back on a sterile absorbent surface and wash the abdominal area thoroughly with 70% ethanol. More extensive presurgical treatments can be employed (e.g., successive rounds of Betadine and 70% ethanol washes), but in our experience this is not necessary for this type of rodent survival surgery. Using a double edge razor, shave the hair from the abdomen in an area of approximately 1 inch wide and 1.5 inches long. Use short quick motions with the razor at approximately a 45&deg; angle. It is important that the surgical area be suitably treated, but not subjected to excessive wetting, as this can result in needless chilling of the animal, and possibly even hypothermia.</li>
<li>Using fine surgical scissors make a 1" longitudinal incision through the skin first, and then through the abdominal muscle of the animal (cutting through connective tissue holding the skin to the muscle will help with the second incision). Note that throughout the procedure care should be taken to assure that the surgical tools remain sterile, and treatment with disinfectant should be performed as needed (i.e. if the tool tips come in contact with non-sterile material).</li>
<li>Using forceps carefully draw out uterine horns, and record the number of embryos on each side. While leaving two adjacent embryos exposed (selection of which two will depend upon the configuration on each side), place most of the uterine horns back into the animal. In this context, two embryos will be exposed at a given time and bathed in PBS, while the mother remains on her back.</li>
<li>Place the animal on its back into the plexiglass holder where it will be during the surgery (Figure1A)*. Next, lower the 10cm tissue culture dish** (which should be disinfected with MB-10 prior to use) down over the mother, with a pair of forceps placed slightly through the green silastic membrane (made using L RTV silicone rubber base, and curing agent; Dow-Corning product numbers 3142761 and 2156946, respectively). As you lower the plate down over the animal, use the forceps to grip the uterine tissue between the two embryos to be injected, and gently pull them through the membrane. At the same time, the plate is lowered completely down onto the holder, and the thumbtacks are pushed in to hold it in place. Pre-warmed (to 37&deg;C) PBS is then added to the dish to completely cover the embryos.</li>
<li>Place the injection stage containing the animal and exposed embryos under the ultrasound probe (Figure1A) to create real-time imaging of the exposed embryos through the uterine wall (Figure1B). The probe is then lowered (using the motorized controls) into the PBS bath directly over the embryos to be imaged. Images can be obtained when the probe is approximately 2-3 mm away from the embryos. It is very important to make sure that the probe head does not hit the embryos as it oscillates back and forth to collect images.</li>
</ol>
* The holder the mother rests in during surgery can easily be made by a machine shop. It should include a wide plexiglass base, with two plexiglass sides glued on top, and a space in between them (wide enough for the mouse to fit while lying on its back). The sides should have a valley ground out of them, which is then filled with black wax (e.g. from a dissection tray). That wax serves as the material into which thumbtacks will be pressed to hold down the plate of PBS that the embryos are bathed in during injection.

** 10cm bacterial dishes should have a hole (approx. 2cm in diameter) punched out of the center of the bottom (this can be done with a Heavy Duty Portable Punch and a 13/16th inch circular die: <a href="http://roperwhitney.com/punching/2-1011.cfm">http://roperwhitney.com/punching/2-1011.cfm</a>). In addition, two small holes on either side of the center hole (about 1.5cm away) should be burned out with a flame-heated needle (or they could be made with a drill of course). These holes are then covered with vacuum grease and will be where the thumbtacks that hold the plate onto the holder push through into the black wax. The vacuum grease is to prevent the PBS from leaking out.

Part 4. Loading Virus into a Microinjection Needle
<ol>
<li>Fashion a microinjection needle by beveling a 1mm (inner diameter) pulled glass capillary. The sharpness of the needle is critical, and working with an insufficiently sharp needle can seriously compromise penetration of the uterine wall and the amnionic sac, and can lead to experimental failure. The sharpened needle is then placed into the pipette holder, which is connected via tubing to a 25 &mu;L microsyringe mounted in a manual infusion/withdrawal pump (other devices can be used to regulate the loading and discharging of the needle, but this is what is shown in the video). For optimal responsiveness (to avoid the expansion and compression associated with an air filled system), the microsyringe, tubing, and needle should be filled with mineral oil.</li>
<li>Prior to loading the needle make sure there are no air bubbles in the system from the syringe all the way to the tip of the needle. Then draw back a small air bubble (1-2 mm in length) into the needle prior to starting to load virus. This air pocket helps maintain separation between the virus and the mineral oil. The viral stock to be injected should contain polybrene at a final concentration of 0.08 mg/ml (for more information on virus production please refer to references 1, 2). Note that concentrated retroviral stocks generally contain a significant amount of particulate matter, which contains the majority of the infectious material, and so cannot be filtered out without a 5- to 10-fold drop in titer. Also, depending upon the preparation, the viral stock may be viscous from the genomic DNA of lysed packaging cells (especially true if using 293 cells to generate MLV/VSV pseudotyped virus). If the aliquot of virus is viscous, a small amount of DNAse I can and should be added to loosen the stock, or loading the needle will be extremely difficult. A droplet of the viral stock (8-10 &mu;L) should be placed on a sterile piece of parafilm in preparation for needle loading. Then, using the withdrawal pump, carefully load the needle paying attention to avoid clogs. Place the loaded needle into the micromanipulator position in the injection area, being careful not to break the needle on the embryos, or the ultrasound probe. Note that if for some reason the needle is loaded significantly before the injection is to occur it can be helpful to draw a small amount of air into the tip, which can be discharged prior to starting the injections. This air pocket can protect against the viral stock drying at the tip of the needle (an occurrence that will almost always render that loaded needle useless).</li>
</ol>
Part 5. Ultrasound Guided Viral Injection
<ol>
<li>The real-time image created by the ultrasound probe is visualized on the video monitor, and can be used to guide the microinjection needle into the embryo. Using this system virus can be injected into the amniotic sac at E8.5 or either the amniotic sac or the ventricular system from E9.5-E11.5 (Figure1B). This is the most difficult part of the procedure and requires a significant amount of hands on experience to master (on the order of 5-20 hours depending upon the investigator). The needle tip is evident in the ultrasound image as the brightest spot on the screen, and should be seen moving in accordance with the adjustments of the probe position (using the motorized controls in the y and z planes, and the manual control in the x plane). It is critically important that the oscillation direction of the probe be parallel to the length of the needle. This will assure that the needle tip remains in the image plane during movements to position it for injection into the embryo.</li>
<li>The embryo should be positioned such that the target region (in this case the forebrain ventricle) is readily visible and is accessible to the needle with the least amount of uterine material in the injection path. In addition, it is critical not to inject through the placenta. Once the target brain region is lined up with the direction of needle advancement (using the knob on the micromanipulator), the needle should be just touching the uterine wall, and then a short quick jab forward should penetrate the tissue. A similar approach is used to penetrate the amnionic sac and then the brain. In some cases, and experienced investigator can hit the ventricle in one motion, especially if the needle is very sharp. The mechanics of moving the probe, the needle, and the embryos (by moving the mother on the stage), require hands-on practice to master.</li>
<li>Once the desired number of embryos has been injected, close the abdominal wall with 5.0 silk sutures. The mechanics of suturing are not specific to this type of surgery. Finally, use veterinary autoclips to staple the skin together over the stitches in the abdominal muscle. Suturing the skin is not recommended because the mouse will chew out the stitches. Analgesia should be applied to the incision area to reduce the amount of pain experienced by the mouse as it awakens. It is recommended that a 0.25% Bupivacaine solution be injected (0.8 ml/kg, or 2 mg/kg) subcutaneously every few millimeters along the incision site.</li>
<li>While the mouse recovers gently lay the animal on absorbent paper in a clean cage containing a gel pack (to facilitate feeding and hydration). Place the cage onto a slide warmer set at 37&deg;C to maintain body temperature. When awakened, place the mouse and the gel pack into a clean cage and return to the animal rack.</li>
<li>The following day check the mouse for any vaginal bleeding, abdominal contractions, and/or an overall distressed look, all of which indicate abortion. If this is the case, euthanize the mouse immediately. Well groomed hair and an overall healthy appearance indicate successful recovery from surgery. The injected embryos can be sacrificed embryonically or postnatally for further analysis. If the virus expresses a reporter gene, such as human alkaline phosphatase (PLAP) or GFP, a staining will reveal areas of positive viral infection (Figure1C). </li>
</ol>
Representative Results
Injected embryos can be sacrificed 1-2 days post injection all the way through to adulthood. If the virus expresses a reporter gene, such as PLAP or GFP, then reporter expression serves to identify virally infected cells and clones of those cells. For example, shown in Figure 1C is a tissue section of a postnatal brain that was infected in utero at E9.5 with a retroviral vector expressing PLAP. Infected cells are visualized as purple clusters after histochemical staining. In addition to identifying virally infected cells, reporter expression allows one to examine cell morphology and position, as well as gene expression status.
 <img src="/files/ftp_upload/2047/2047fig1.jpg" alt="Figure 1" /> 
Figure 1. Viral injection into the E9.5 mouse forebrain ventricles. A. The anesthetized animal is placed on the injection stage. Two embryos would be exposed and positioned under the ultrasound probe where indicated (arrow). The microinjection needle filled with virus is located near the embryos and lined up with the ultrasound probe. B. Screen capture of an real-time ultrasound image from an E9.5 mouse embryo. V, ventricle; AS, amniotic sac; UW, uterine wall. C. Embryos were injected with a PLAP-expressing virus at E10.5. Histochemical staining for PLAP reveals the location of viral infection events.

<ol>
	<li>Yee, J. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Generation+of+high-titer+pseudotyped+retroviral+vectors+with+very+broad+host+range.">Generation of high-titer pseudotyped retroviral vectors with very broad host range.</a> Methods Cell Biol. 43, 99-112 (1994).</li><li>Gaiano, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+method+for+rapid+gain-of-function+studies+in+the+mouse+embryonic+nervous+system.">A method for rapid gain-of-function studies in the mouse embryonic nervous system.</a> Nat Neurosci. 2, 812-819 (1999).</li></ol>

No conflicts of interest declared.

Viral injections using ultrasound guidance can be conducted from E8.5-E11.5, where only the amniotic sac can be injected at E8.5, while both the amniotic sac and ventricular system can be injected from E9.5-E11.5. When performed correctly, viral particles injected into the ventricular system using ultrasound guidance have access to the cells lining the ventricular system and, therefore, can infect the various structures of the forebrain (neocortex, basal ganglia, diencephalon, eye, etc.), midbrain, and hindbrain (Figure1C). Virus injected into the amniotic sac has access to the cells on the exterior of the embryo. In addition to virus, ultrasound guidance can also be used to inject cells into the developing embryo. Therefore, this technique provides multiple options to choose from (developmental time period, structure, virus/cells) when designing an experiment.
It is critical that the injected virus or cells express a reporter for easy identification of infected/injected cells. Historically, human placental alkaline phosphatase (PLAP) or GFP have been used. From experience, we have found PLAP can be a very useful reporter gene because both PLAP histochemical and immunohistochemical staining yields a sharp and distinct single cell stain that allows one to analyze cell morphology and position, and to conduct a clonal analysis. Since viral GFP expression can be faint, a GFP reporter may not be ideal for staining tissue, but is useful if one wants to obtain single cells by fluorescence activated cell sorting (FACS).

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>Micromanipulator </td>
<td>&nbsp;</td>
<td>Narishige</td>
<td>91084361683D</td>
<td>&nbsp;</td>
<tr>
<td>HI-7 pipette holder</td>
<td>&nbsp;</td>
<td>Narishige</td>
<td>9108436141</td>
<td>&nbsp;</td>
<tr>
<td>10 mm support arm</td>
<td>&nbsp;</td>
<td>Carl Zeiss</td>
<td>9108436206</td>
<td>&nbsp;</td>
<tr>
<td>IP iron base plate</td>
<td>&nbsp;</td>
<td>Carl Zeiss</td>
<td>9108436167</td>
<td>&nbsp;</td>
<tr>
<td>CI-1 connector for pipette holder</td>
<td>&nbsp;</td>
<td>Carl Zeiss</td>
<td>9108436257</td>
<td>&nbsp;</td>
<tr>
<td>1mm ID tubing</td>
<td>&nbsp;</td>
<td>Carl Zeiss</td>
<td>911013</td>
<td>&nbsp;</td>
<tr>
<td>3-way luer lock stopcock (pkg 10)</td>
<td>&nbsp;</td>
<td>Carl Zeiss</td>
<td>K420163-4503</td>
<td>&nbsp;</td>
<tr>
<td>Motor controller, 2-4 axes</td>
<td>&nbsp;</td>
<td>Newport</td>
<td>860-c2</td>
<td>&nbsp;</td>
<tr>
<td>Joystick</td>
<td>&nbsp;</td>
<td>Newport</td>
<td>PMC200-J</td>
<td>&nbsp;</td>
<tr>
<td>Micrometer adapter</td>
<td>&nbsp;</td>
<td>Newport</td>
<td>ADAPT-BM17-375	</td>
<td>&nbsp;</td>
<tr>
<td>Motorized drive</td>
<td>&nbsp;</td>
<td>Newport</td>
<td>CMA-25CC</td>
<td>&nbsp;</td>
<tr>
<td>Cable assembly</td>
<td>&nbsp;</td>
<td>Newport</td>
<td>860I-10</td>
<td>&nbsp;</td>
<tr>
<td>25 mm translation stage</td>
<td>&nbsp;</td>
<td>Newport</td>
<td>UMR8-25	</td>
<td>&nbsp;</td>
<tr>
<td>Micrometer</td>
<td>&nbsp;</td>
<td>Newport</td>
<td>BM17-25</td>
<td>&nbsp;</td>
<tr>
<td>Base plate</td>
<td>&nbsp;</td>
<td>Newport</td>
<td>M-PBN8</td>
<td>&nbsp;</td>
<tr>
<td>Inner mounting bracket</td>
<td>&nbsp;</td>
<td>Newport</td>
<td>EQ80-I</td>
<td>&nbsp;</td>
<tr>
<td>Outer mounting bracket</td>
<td>&nbsp;</td>
<td>Newport</td>
<td>EQ80-E</td>
<td>&nbsp;</td>
<tr>
<td>Man. infusion/withdrawl pump</td>
<td>&nbsp;</td>
<td>Stoelting</td>
<td>51222</td>
<td>&nbsp;</td>
<tr>
<td>25 &mu;l microsyringe</td>
<td>&nbsp;</td>
<td>Stoelting</td>
<td>51113</td>
<td>&nbsp;</td>
<tr>
<td>24"x12"x0.5" metric board plate</td>
<td>&nbsp;</td>
<td>Edmund</td>
<td>NT03-640</td>
<td>&nbsp;</td>
<tr>
<td>Set of self-adjusting feet</td>
<td>&nbsp;</td>
<td>Edmund</td>
<td>NT34-841	</td>
<td>&nbsp;</td>
<tr>
<td>Bar-type lens holder	</td>
<td>&nbsp;</td>
<td>Edmund</td>
<td>NT03-669		</td>
<td>&nbsp;</td>
<tr>
<td>Right angle post clamp</td>
<td>&nbsp;</td>
<td>Edmund</td>
<td>NT53-357		</td>
<td>&nbsp;</td>
<tr>
<td>2" post holder</td>
<td>&nbsp;</td>
<td>Edmund</td>
<td>NT03-646		</td>
<td>&nbsp;</td>
<tr>
<td>4&#x201D; steel post	</td>
<td>&nbsp;</td>
<td>Edmund</td>
<td>NT36-499		</td>
<td>&nbsp;</td>
<tr>
<td>6&#x201D; steel post</td>
<td>&nbsp;</td>
<td>Edmund</td>
<td>NT36-503		</td>
<td>&nbsp;</td>
<tr>
<td>12/pk set screws, 1/4-20 x 1/2"</td>
<td>&nbsp;</td>
<td>Edmund</td>
<td>NT03-644		</td>
<td>&nbsp;</td>
<tr>
<td>Additional Materials:</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>PBS, pH7.4</td>
<td>&nbsp;</td>
<td>Invitrogen</td>
<td>10010049</td>
<td>&nbsp;</td>
<tr>
<td>Slide warmer</td>
<td>&nbsp;</td>
<td>Fisher Scientific</td>
<td>Numerous options</td>
<td>&nbsp;</td>
<tr>
<td>Double Edge Razor Blades</td>
<td>&nbsp;</td>
<td>Electron Microscopy Sciences</td>
<td>72000</td>
<td>&nbsp;</td>
<tr>
<td>Borosilicate Glass O.D: 1.0mm, I.D.: 0.05mm</td>
<td>&nbsp;</td>
<td>Sutter Instruments</td>
<td>B100-50-10</td>
<td>&nbsp;</td>
<tr>
<td>1cc Insulin Syringe U-100 27G5/8</td>
<td>&nbsp;</td>
<td>Becton Dickinson</td>
<td>329412</td>
<td>&nbsp;</td>
<tr>
<td>Autoclip Applier</td>
<td>&nbsp;</td>
<td>Becton Dickinson</td>
<td>427630</td>
<td>&nbsp;</td>
<tr>
<td>Autoclips, 9mm (to close skin incision)</td>
<td>&nbsp;</td>
<td>Becton Dickinson</td>
<td>427631</td>
<td>&nbsp;</td>
<tr>
<td>5.0 Silk sutures</td>
<td>&nbsp;</td>
<td>Fisher</td>
<td>S-1173</td>
<td>&nbsp;</td>
<tr>
<td>Sterilube ophthalmic ointment</td>
<td>&nbsp;</td>
<td>Fera pharmaceuticals</td>
<td>48102-012-35</td>
<td>&nbsp;</td>
<tr>
<td>MB-10 or equivalent disinfectant</td>
<td>&nbsp;</td>
<td>Quip labs</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>10% bleach</td>
<td>&nbsp;</td>
<td>Multiple sources</td>
<td>&nbsp;</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>
			<div>
			"One of the following ultrasound backscatter microscopes can be used for this procedure. Although in the video the P40 from Paradigm-Medical is used, the P40 is no longer commercially available, and has been replaced by the P60, which is similarly priced and can be used for the same application. The additional materials described for stage construction are for use with Paradigm-Medical device(s). The Vevo 2100 comes with equipment for small animal imaging.
<ol>
<li>P60 Ultrasound BioMicroscope (UBM) from Paradigm-Medical 
(<a href="http://www.paradigm-medical.com/ubms.html">http://www.paradigm-medical.com/ubms.html</a>).</li>
<li>Vevo 2100 from VisualSonics (<a href="http://www.visualsonics.com/">http://www.visualsonics.com/</a>)</li>
</ol>
Anesthetic and Analgesic
The Nembutal solution (50 mg/mL injectable sodium pentobarbital; produced by Abbott laboratories) can be obtained from Bulter Schein Animal Health. Note that this is a schedule II controlled substance and requires a Drug Enforcement Agency (DEA) license to obtain.
The Bupivacaine solution (0.25%; produced by Hospira, Inc, among others) can be obtained from a number of distributors, including Moore Medical.		</div>

ultrasound-guided microinjection into the mouse forebrain in utero at e9.5

In utero survival surgery in mice permits the molecular manipulation of gene expression during development. However, because the uterine wall is opaque during early embryogenesis, the ability to target specific parts of the embryo for microinjection is greatly limited. Fortunately, high-frequency ultrasound imaging permits the generation of images that can be used in real time to guide a microinjection needle into the embryonic region of interest. Here we describe the use of such imaging to guide the injection of retroviral vectors into the ventricular system of the mouse forebrain at embryonic day (E) 9.5. This method uses a laparotomy to permit access to the uterine horns, and a specially designed plate that permits host embryos to be bathed in saline while they are imaged and injected. Successful surgeries often result in most or all of the injected embryos surviving to any subsequent time point of interest (embryonically or postnatally). The principles described here can be used with slight modifications to perform injections into the amnionic fluid of E8.5 embryos (thereby permitting infection along the anterior posterior extent of the neural tube, which has not yet closed), or into the ventricular system of the brain at E10.5/11.5. Furthermore, at mid-neurogenic ages (~E13.5), ultrasound imaging can be used direct injection into specific brain regions for viral infection or cell transplantation. The use of ultrasound imaging to guide in utero injections in mice is a very powerful technique that permits the molecular and cellular manipulation of mouse embryos in ways that would otherwise be exceptionally difficult if not impossible.

Watch this Scientific Journal Video about Ultrasound-Guided Microinjection into the Mouse Forebrain In Utero at E9.5 at JoVE.com

Ultrasound-Guided Microinjection into the Mouse Forebrain In Utero at E9.5

In utero survival surgery in mice permits the molecular manipulation of gene expression during development. Here we describe the use of high-frequency ultrasound imaging to guide the injection of retroviral vectors into the mouse brain at embryonic day (E) 9.5.

Ultrasound-Guided Microinjection into the Mouse Forebrain In Utero at E9.5

In utero survival surgery in mice permits the molecular manipulation of gene expression during development.  However, because the uterine wall is opaque ...

Research

JoVE Journal

Neuroscience

Time-lapse Live Imaging of Clonally Related Neural Progenitor Cells in the Developing Zebrafish Forebrain

Precise patterns of division, migration and differentiation of neural progenitor cells are crucial for proper brain development and function1,2. To ...

Efficient Gene Delivery into Multiple CNS Territories Using In Utero Electroporation

Efficient Gene Delivery into Multiple CNS Territories Using In Utero Electroporation

The ability to manipulate gene expression is the cornerstone of modern day experimental embryology, leading to the elucidation of multiple developmental ...

Mouse in Utero Electroporation: Controlled Spatiotemporal Gene Transfection

Mouse in Utero Electroporation: Controlled Spatiotemporal Gene Transfection

In order to understand the function of genes expressed in specific region of the developing brain, including signaling molecules and axon guidance ...

Time-lapse Imaging of Neuroblast Migration in Acute Slices of the Adult Mouse Forebrain

There is a substantial body of evidence indicating that new functional neurons are constitutively generated from an endogenous pool of neural stem cells ...

Visualization and Genetic Manipulation of Dendrites and Spines in the Mouse Cerebral Cortex and Hippocampus using In utero Electroporation

Visualization and Genetic Manipulation of Dendrites and Spines in the Mouse Cerebral Cortex and Hippocampus using In utero Electroporation

In utero electroporation (IUE) has become a powerful technique to study the development of different regions of the embryonic nervous system 1-5. To date ...

Hippocampal Insulin Microinjection and In vivo Microdialysis During Spatial Memory Testing

Hippocampal Insulin Microinjection and In vivo Microdialysis During Spatial Memory Testing

Glucose metabolism is a useful marker for local neural activity, forming the basis of methods such as 2-deoxyglucose and functional magnetic resonance ...

Forebrain Electrophysiological Recording in Larval Zebrafish

Epilepsy affects nearly 3 million people in the United States and up to 50 million people worldwide. Defined as the occurrence of spontaneous unprovoked ...

Genetic Manipulation of the Mouse Developing Hypothalamus through In utero Electroporation

Genetic Manipulation of the Mouse Developing Hypothalamus through In utero Electroporation

Genetic  modification of specific regions of the developing mammalian brain is a very  powerful experimental approach. However, generating novel mouse ...

Stereotaxic Infusion of Oligomeric Amyloid-beta into the Mouse Hippocampus

Alzheimer&#8217;s disease is a neurodegenerative disease affecting the aging population. A key neuropathological feature of the disease is the ...

Inducing Cre-lox Recombination in Mouse Cerebral Cortex Through In Utero Electroporation

Inducing Cre-lox Recombination in Mouse Cerebral Cortex Through In Utero Electroporation

Cell-autonomous neuronal functions of genes can be revealed by causing loss or gain of function of a gene in a small and sparse population of neurons. To ...