Name: scalable solution-processed fabrication strategy for high-performance, flexible, transparent electrodes with embedded metal mesh
Uploaded: 2017-06-23T15:00:00
Description: Watch this Scientific Journal Video about Scalable Solution-processed Fabrication Strategy for High-performance, Flexible, Transparent Electrodes with Embedded Metal Mesh at JoVE.com

This work was partially supported by the General Research Fund of the Research Grants Council of the Hong Kong Special Administrative Region (Award No. 17246116), the Young Scholar Program of the National Natural Science Foundation of China (61306123), the Basic Research Program-General Program from the Science and Technology Innovation Commission of Shenzhen Municipality (JCYJ20140903112959959), and the Key Research and Development Program from the Zhejiang Provincial Department of Science and Technology (2017C01058). The authors would like to thank Y.-T. Huang and S. P. Feng for their help with the optical measurements.

CAUTION: Please pay attention to electron beam safety. Please wear the correct protective glasses and clothes. Also, handle the all flammable solvents and solutions carefully.
1. Photolithography-based Fabrication of the EMTE
<ol>
	<li>Photolithography for fabricating the mesh pattern.
	<ol>
		<li>Clean FTO glass substrates (3 cm x 3 cm) with liquid detergent using cotton swab. Rinse them thoroughly with deionized (DI) water using a clean cotton swab. Further clean them usin...

<ol>
	<li>Hecht, D. S., Hu, L., Irvin, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Emerging+Transparent+Electrodes+Based+on+Thin+Films+of+Carbon+Nanotubes,+Graphene,+and+Metallic+Nanostructures.">Emerging Transparent Electrodes Based on Thin Films of Carbon Nanotubes, Graphene, and Metallic Nanostructures.</a> Adv Mater. 23 (13), 1482-1513 (2011).</li><li>Bonaccorso, F., Sun, Z., Hasan, T., Ferrari, A. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Graphene+photonics+and+optoelectronics.">Graphene photonics and optoelectronics.</a> Nat Photonics. 4 (9), 611-622 (2010).</li><li>Kirchmeyer, S., Reuter, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Scientific+importance,+properties+and+growing+applications+of+poly(3,4-ethylenedioxythiophene).">Scientific importance, properties and growing applications of poly(3,4-ethylenedioxythiophene).</a> J Mater Chem. 15 (21), 2077-2088 (2005).</li><li>Vosgueritchian, M., Lipomi, D. J., Bao, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Highly+Conductive+and+Transparent+PEDOT:PSS+Films+with+a+Fluorosurfactant+for+Stretchable+and+Flexible+Transparent+Electrodes.">Highly Conductive and Transparent PEDOT:PSS Films with a Fluorosurfactant for Stretchable and Flexible Transparent Electrodes.</a> Adv Funct Mater. 22 (2), 421-428 (2012).</li><li>Zhang, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Strong,+Transparent,+Multifunctional,+Carbon+Nanotube+Sheets.">Strong, Transparent, Multifunctional, Carbon Nanotube Sheets.</a> Science. 309 (5738), 1215-1219 (2005).</li><li>De, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Silver+Nanowire+Networks+as+Flexible,+Transparent,+Conducting+Films:+Extremely+High+DC+to+Optical+Conductivity+Ratios.">Silver Nanowire Networks as Flexible, Transparent, Conducting Films: Extremely High DC to Optical Conductivity Ratios.</a> ACS Nano. 3 (7), 1767-1774 (2009).</li><li>van de Groep, J., Spinelli, P., Polman, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Transparent+Conducting+Silver+Nanowire+Networks.">Transparent Conducting Silver Nanowire Networks.</a> Nano Lett. 12 (6), 3138-3144 (2012).</li><li>Hong, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Highly+Stretchable+and+Transparent+Metal+Nanowire+Heater+for+Wearable+Electronics+Applications.">Highly Stretchable and Transparent Metal Nanowire Heater for Wearable Electronics Applications.</a> Adv Mater. 27 (32), 4744-4751 (2015).</li><li>Bari, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Simple+hydrothermal+synthesis+of+very-long+and+thin+silver+nanowires+and+their+application+in+high+quality+transparent+electrodes.">Simple hydrothermal synthesis of very-long and thin silver nanowires and their application in high quality transparent electrodes.</a> J Mater Chem A. 4 (29), 11365-11371 (2016).</li><li>Hyunjin, M., Phillip, W., Jinhwan, L., Seung Hwan, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Low-haze,+annealing-free,+very+long+Ag+nanowire+synthesis+and+its+application+in+a+flexible+transparent+touch+panel.">Low-haze, annealing-free, very long Ag nanowire synthesis and its application in a flexible transparent touch panel.</a> Nanotechnol. 27 (29), 295201 (2016).</li><li>Lee, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Highly+Stretchable+and+Transparent+Supercapacitor+by+Ag-Au+Core-Shell+Nanowire+Network+with+High+Electrochemical+Stability.">Highly Stretchable and Transparent Supercapacitor by Ag-Au Core-Shell Nanowire Network with High Electrochemical Stability.</a> ACS Appl Mater Interfaces. 8 (24), 15449-15458 (2016).</li><li>Cairns, D. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Strain-dependent+electrical+resistance+of+tin-doped+indium+oxide+on+polymer+substrates.">Strain-dependent electrical resistance of tin-doped indium oxide on polymer substrates.</a> Appl Phys Lett. 76 (11), 1425-1427 (2000).</li><li>Bel Hadj Tahar, R., Ban, T., Ohya, Y., Takahashi, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tin+doped+indium+oxide+thin+films:+Electrical+properties.">Tin doped indium oxide thin films: Electrical properties.</a> J Appl Phys. 83 (5), 2631-2645 (1998).</li><li>Kumar, A., Zhou, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Race+To+Replace+Tin-Doped+Indium+Oxide:+Which+Material+Will+Win?.">The Race To Replace Tin-Doped Indium Oxide: Which Material Will Win?.</a> ACS Nano. 4 (1), 11-14 (2010).</li><li>Hong, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nonvacuum,+Maskless+Fabrication+of+a+Flexible+Metal+Grid+Transparent+Conductor+by+Low-Temperature+Selective+Laser+Sintering+of+Nanoparticle+Ink.">Nonvacuum, Maskless Fabrication of a Flexible Metal Grid Transparent Conductor by Low-Temperature Selective Laser Sintering of Nanoparticle Ink.</a> ACS Nano. 7 (6), 5024-5031 (2013).</li><li>Wu, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Transparent+Electrode+Based+on+a+Metal+Nanotrough+Network.">A Transparent Electrode Based on a Metal Nanotrough Network.</a> Nat Nanotechnol. 8 (6), 421-425 (2013).</li><li>Han, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Uniform+Self-Forming+Metallic+Network+as+a+High-Performance+Transparent+Conductive+Electrode.">Uniform Self-Forming Metallic Network as a High-Performance Transparent Conductive Electrode.</a> Adv Mater. 26 (6), 873-877 (2014).</li><li>Kim, H. -. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-Durable+AgNi+Nanomesh+Film+for+a+Transparent+Conducting+Electrode.">High-Durable AgNi Nanomesh Film for a Transparent Conducting Electrode.</a> Small. 10 (18), 3767-3774 (2014).</li><li>Kwon, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Low-Temperature+Oxidation-Free+Selective+Laser+Sintering+of+Cu+Nanoparticle+Paste+on+a+Polymer+Substrate+for+the+Flexible+Touch+Panel+Applications.">Low-Temperature Oxidation-Free Selective Laser Sintering of Cu Nanoparticle Paste on a Polymer Substrate for the Flexible Touch Panel Applications.</a> ACS Appl Mater Interfaces. 8 (18), 11575-11582 (2016).</li><li>Suh, Y. D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanowire+reinforced+nanoparticle+nanocomposite+for+highly+flexible+transparent+electrodes:+borrowing+ideas+from+macrocomposites+in+steel-wire+reinforced+concrete.">Nanowire reinforced nanoparticle nanocomposite for highly flexible transparent electrodes: borrowing ideas from macrocomposites in steel-wire reinforced concrete.</a> J Mater Chem C. 5 (4), 791-798 (2017).</li><li>Bao, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+Situ+Fabrication+of+Highly+Conductive+Metal+Nanowire+Networks+with+High+Transmittance+from+Deep-Ultraviolet+to+Near-Infrared.">In Situ Fabrication of Highly Conductive Metal Nanowire Networks with High Transmittance from Deep-Ultraviolet to Near-Infrared.</a> ACS Nano. 9 (3), 2502-2509 (2015).</li><li>van Osch, T. H. J., Perelaer, J., de Laat, A. W. M., Schubert, U. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Inkjet+Printing+of+Narrow+Conductive+Tracks+on+Untreated+Polymeric+Substrates.">Inkjet Printing of Narrow Conductive Tracks on Untreated Polymeric Substrates.</a> Adv Mater. 20 (2), 343-345 (2008).</li><li>Ahn, B. Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Omnidirectional+Printing+of+Flexible,+Stretchable,+and+Spanning+Silver+Microelectrodes.">Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes.</a> Science. 323 (5921), 1590-1593 (2009).</li><li>Khan, A., Rahman, K., Hyun, M. -. T., Kim, D. -. S., Choi, K. -. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multi-nozzle+electrohydrodynamic+inkjet+printing+of+silver+colloidal+solution+for+the+fabrication+of+electrically+functional+microstructures.">Multi-nozzle electrohydrodynamic inkjet printing of silver colloidal solution for the fabrication of electrically functional microstructures.</a> Appl Phys A. 104 (4), 1113-1120 (2011).</li><li>Khan, A., Rahman, K., Kim, D. S., Choi, K. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+printing+of+copper+conductive+micro-tracks+by+multi-nozzle+electrohydrodynamic+inkjet+printing+process.">Direct printing of copper conductive micro-tracks by multi-nozzle electrohydrodynamic inkjet printing process.</a> J Mater Process Technol. 212 (3), 700-706 (2012).</li><li>Ellmer, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Past+achievements+and+future+challenges+in+the+development+of+optically+transparent+electrodes.">Past achievements and future challenges in the development of optically transparent electrodes.</a> Nat Photonics. 6 (12), 809-817 (2012).</li><li>Choi, H. -. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Uniformly+embedded+silver+nanomesh+as+highly+bendable+transparent+conducting+electrode.">Uniformly embedded silver nanomesh as highly bendable transparent conducting electrode.</a> Nanotechnol. 26 (5), 055305 (2015).</li><li>Khan, A., Li, S., Tang, X., Li, W. -. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanostructure+Transfer+Using+Cyclic+Olefin+Copolymer+Templates+Fabricated+by+Thermal+Nanoimprint+Lithography.">Nanostructure Transfer Using Cyclic Olefin Copolymer Templates Fabricated by Thermal Nanoimprint Lithography.</a> J Vac Sci Technol B. 32 (6), (2014).</li><li>Khan, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-Performance+Flexible+Transparent+Electrode+with+an+Embedded+Metal+Mesh+Fabricated+by+Cost-Effective+Solution+Process.">High-Performance Flexible Transparent Electrode with an Embedded Metal Mesh Fabricated by Cost-Effective Solution Process.</a> Small. 12 (22), 3021-3030 (2016).</li><li>Moon Kyu, K., Jong, G. O., Jae Yong, L., Guo, L. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Continuous+phase-shift+lithography+with+a+roll-type+mask+and+application+to+transparent+conductor+fabrication.">Continuous phase-shift lithography with a roll-type mask and application to transparent conductor fabrication.</a> Nanotechnol. 23 (34), 344008 (2012).</li><li>Chou, S. Y., Krauss, P. R., Renstrom, P. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Imprint+of+sub-25+nm+vias+and+trenches+in+polymers.">Imprint of sub-25 nm vias and trenches in polymers.</a> Appl Phys Lett. 67 (21), 3114-3116 (1995).</li><li>Manfrinato, V. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Resolution+Limits+of+Electron-Beam+Lithography+toward+the+Atomic+Scale.">Resolution Limits of Electron-Beam Lithography toward the Atomic Scale.</a> Nano Lett. 13 (4), 1555-1558 (2013).</li><li>Khan, A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Solution-processed+Transparent+Nickel-mesh+Counter+Electrode+with+In-situ+Electrodeposited+Platinum+Nanoparticles+for+Full-Plastic+Bifacial+Dye-sensitized+Solar+Cells.">Solution-processed Transparent Nickel-mesh Counter Electrode with In-situ Electrodeposited Platinum Nanoparticles for Full-Plastic Bifacial Dye-sensitized Solar Cells.</a> ACS Appl Mater Interfaces. 9 (9), 8083-8091 (2017).</li><li>Lee, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+dual-scale+metal+nanowire+network+transparent+conductor+for+highly+efficient+and+flexible+organic+light+emitting+diodes.">A dual-scale metal nanowire network transparent conductor for highly efficient and flexible organic light emitting diodes.</a> Nanoscale. 9 (5), 1978-1985 (2017).</li><li>Khan, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+patterning+and+electrospray+deposition+through+EHD+for+fabrication+of+printed+thin+film+transistors.">Direct patterning and electrospray deposition through EHD for fabrication of printed thin film transistors.</a> Current Appl Phys. 11 (1), S271-S279 (2011).</li></ol>

Our fabrication method can be further modified to allow for scalability of the feature sizes and areas of the sample and for the use of various materials. The successful fabrication of sub-micrometer-linewidth (Figure 3a-3c) copper EMTEs using EBL proves that EMTE structure and key steps in LEIT fabrication, including electroplating and imprint transfer, can be reliably scaled down to a sub-micrometer range. Similarly, other large-area lithography processes, such as phase-shift photolith...

Worldwide, studies are being conducted to look for replacements for rigid transparent conductive oxides (TCOs), such as indium tin oxide and fluorine-doped tin oxide (FTO) &#64257;lms, in order to fabricate flexible/stretchable TEs to be used in future flexible/stretchable optoelectronic devices1. This necessitates novel materials with new fabrication methods.
Nanomaterials, such as graphene2, conducting polymers3,4, carbon nanotubes5, and random metal nanowire networks6,7,8,9,10,11, have been studied and have demonstrated their capabilities in flexible TEs, addressing the shortcomings of existing TCO-based TEs, including &#64257;lm fragility12, low infrared transmittance13, and low abundance14. Even with this potential, it is still challenging to attain high electrical and optical conductance without deterioration under continuous bending.
In this framework, regular metal meshes15,16,17,18,19,20 are evolving as a promising candidate and have accomplished remarkably high optical transparency and low sheet resistance, which can be tunable on demand. However, the extensive use of metal mesh-based TEs has been hindered due to numerous challenges. First, fabrication often involves the expensive, vacuum-based deposition of metals16,17,18,21. Second, the thickness may easily cause electrical short-circuiting22,23,24,25 in thin-film organic optoelectronic devices. Third, the weak adhesion with the substrate surface results in poor flexibility26,27. The abovementioned limitations have created a demand for novel metal mesh-based TE structures and scalable approaches for their fabrication.
In this study, we report a novel structure of flexible TEs that contains a metal mesh completely embedded in a polymer film. We also describe an innovative, solution-based, and low-cost fabrication approach that combines lithography, electrodeposition, and imprint transfer. FoM values as high as 15k have been achieved on sample EMTEs. Due to the embedded nature of EMTEs, remarkable chemical, mechanical, and environmental stability were observed. Furthermore, the solution-processed fabrication technique established in this work can potentially be used for the low-cost and high-throughput production of the proposed EMTEs. This fabrication technique is scalable to finer metal-mesh linewidths, larger areas, and a range of metals.

<table border="0" cellpadding="0" cellspacing="0" width="1139">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">Acetone</td>
			<td style="width:251px;">Sigma-Aldrich</td>
			<td style="width:119px;">W332615</td>
			<td style="width:528px;">Highly flammable</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">Isopropanol</td>
			<td style="width:251px;">Sigma-Aldrich</td>
			<td style="width:119px;">190764</td>
			<td>Highly flammable</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">FTO Glass Substrates</td>
			<td style="width:251px;">South China Xiang S&#38;T, China</td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">Photoresist&#160;</td>
			<td style="width:251px;">Clariant, Switzerland</td>
			<td style="width:119px;">54611L11</td>
			<td>AZ 1500 Positive tone resist (20cP)</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">UV Mask Aligner&#160;</td>
			<td style="width:251px;">Chinese Academy of Sciences, China</td>
			<td>URE-2000/35</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">Photoresist Developer&#160;</td>
			<td style="width:251px;">Clariant, Switzerland</td>
			<td style="width:119px;">184411</td>
			<td>AZ 300 MIF Developer</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:241px;">Cu, Ag, Au, Ni, and Zn Electroplating solutions</td>
			<td style="width:251px;">Caswell, USA</td>
			<td style="width:119px;"></td>
			<td>Ready to use solutions (PLUG N&#39; PLATE)</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">Keithley 2400 SourceMeter</td>
			<td style="width:251px;">Keithley, USA</td>
			<td style="width:119px;">41J2103</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">COC Plastic Films</td>
			<td style="width:251px;">TOPAS, Germany</td>
			<td style="width:119px;">F13-19-1</td>
			<td>Grade 8007 (Glass transition temperature: 78 &#176;C)</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">Hydraulic Press&#160;</td>
			<td style="width:251px;">Specac Ltd., UK</td>
			<td style="width:119px;">GS15011</td>
			<td>With low tonnage kit ( 0-1 ton guage)</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">Temperature Controller&#160;</td>
			<td style="width:251px;">Specac Ltd., UK</td>
			<td style="width:119px;">GS15515</td>
			<td>Water cooled heated platens and controller</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">Chiller&#160;</td>
			<td style="width:251px;">Grant Instruments, UK</td>
			<td style="width:119px;">T100-ST5</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">Polymethyl Methacrylate (PMMA)</td>
			<td style="width:251px;">Sigma-Aldrich</td>
			<td style="width:119px;">200336</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">Anisole</td>
			<td style="width:251px;">Sigma-Aldrich</td>
			<td style="width:119px;">96109</td>
			<td>Highly flammable</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">EBL Setup</td>
			<td style="width:251px;">Philips, Netherlands</td>
			<td style="width:119px;">FEI XL30</td>
			<td>Scanning electron microscope equipped with a JC Nabity pattern generator&#160;&#160;</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">Isopropyl Ketone&#160;</td>
			<td style="width:251px;">Sigma-Aldrich</td>
			<td style="width:119px;">108-10-1</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">Silver Paste</td>
			<td style="width:251px;">Ted Pella, Inc, USA</td>
			<td style="width:119px;">16031</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:241px;">UV&#8211;Vis Spectrometer&#160;</td>
			<td style="width:251px;">Perkin Elmer, USA</td>
			<td style="width:119px;">L950</td>
			<td></td>
		</tr>
	</tbody>
</table>

scalable solution-processed fabrication strategy for high-performance, flexible, transparent electrodes with embedded metal mesh

Here, the authors report the embedded metal-mesh transparent electrode (EMTE), a new transparent electrode (TE) with a metal mesh completely embedded in a polymer film. This paper also presents a low-cost, vacuum-free fabrication method for this novel TE; the approach combines lithography, electroplating, and imprint transfer (LEIT) processing. The embedded nature of the EMTEs offers many advantages, such as high surface smoothness, which is essential for organic electronic device production; superior mechanical stability during bending; favorable resistance to chemicals and moisture; and strong adhesion with plastic film. LEIT fabrication features an electroplating process for vacuum-free metal deposition and is favorable for industrial mass production. Furthermore, LEIT allows for the fabrication of metal mesh with a high aspect ratio (i.e., thickness to linewidth), significantly enhancing its electrical conductance without adversely losing optical transmittance. We demonstrate several prototypes of flexible EMTEs, with sheet resistances lower than 1 &#937;/sq and transmittances greater than 90%, resulting in very high figures of merit (FoM) &#8211; up to 1.5 x 104 &#8211; which are amongst the best values in the published literature.

Figure 1 displays the schematic and fabrication flowchart of the EMTE samples. As presented in Figure 1a, the EMTE consists of a metal mesh fully embedded in a polymer film. The upper face of the mesh is on the same level as the substrate, displaying a generally smooth platform for subsequent device production. The fabrication technique is schematically explained in Figure 1b-e. Afte...

Watch this Scientific Journal Video about Scalable Solution-processed Fabrication Strategy for High-performance, Flexible, Transparent Electrodes with Embedded Metal Mesh at JoVE.com

Scalable Solution-processed Fabrication Strategy for High-performance, Flexible, Transparent Electrodes with Embedded Metal Mesh

This protocol describes a solution-based fabrication strategy for high-performance, flexible, transparent electrodes with fully-embedded, thick metal mesh. Flexible transparent electrodes fabricated by this process demonstrate among the highest reported performances, including ultra-low sheet resistance, high optical transmittance, mechanical stability under bending, strong substrate adhesion, surface smoothness, and environmental stability.

Here, the authors report the embedded metal-mesh transparent electrode (EMTE), a new transparent electrode (TE) with a metal mesh completely embedded in a ...

The overall goal of this procedure is to use a solution-based fabrication process that combines lithography, electric deposition, and imprint transfer to produce a high performance, flexible, transparent conductive film with a self-anchored, fully embedded micro metal mesh. This mesh can help address key challenges facing future metal-mesh based flexible electronic devices, such as non-flat surface typography, low fabrication throughput, and high manufacturing cost. Embedded metal mesh provides several advantages, such as crucial self-smoothness, mechanical stability, and a high-burning stress, strong adhesion to the flexible substrate, and resistance against moisture, oxygen, and chemicals.Our process will place this by based the metal deposition with solution-based electric deposition, and is simple for pursuing high throughput, like volume and low cost production. My group helped Dr.Wendy Lee's group to test the dimensional stabilities of metal-mesh fabrication process by patterning 400 nanometer metal-mesh with our home built, electro beam lithography system. My assistant Xiong Ze is going to demonstrate the electro beam patterning process.To begin EMTE fabrication, clean a three centimeter by three centimeter piece of flooring-doped tin oxide coated glass with liquid detergent and a cotton swab. Thoroughly rinse the glass substrate with deionized water, and remove traces of detergent with another swab. Sonicate the FTO glass in isopropanol for 30 seconds at 40 kilohertz.Then dry the clean glass with compressed air. Next, place the clean, dry FTO glass in a spin-coater and apply 100 microliters of positive photo-resist. Spin-coat the glass at 4, 000 RPM for 60 seconds to produce a 1.8 micron-thick film.Bake the coated glass at 100 degrees Celsius for 50 seconds. Cover the coated glass with a mesh-pattern mask, and expose the photo-resist to sufficient UV light to achieve a radiant fluence of 20 millijoules per square centimeter. Then, immerse the coated glass in the appropriate developer for 50 seconds to remove the exposed photo-resist.Rinse the sample in deionized water and dry it under a stream of compressed air. Next, place 100 miloliters of acquiesce copper electro-plating solution in a 250 milliliter beaker. Immerse the sample in the plating solution.And connect it to the negative terminal of a two-electrode electro-deposition apparatus. Then, connect a copper metal bar to the positive terminal of the apparatus. Apply a constant five milliamp current to achieve a current density of three milliamps per square centimeter for 15 minutes, to deposit a 1.5 micron thick layer of copper on the sample.The croqueting is the critical step in the fabrication. Current density and electroplating time effect the morphology of the metal mesh and the final performance, and should be tested and optimized with your own samples. Thoroughly rinse the electroplated sample with deionized water, and dry it under a stream of compressed air.Immerse the sample in acetone for five minutes to dissolve the remaining photo resist to leave a bare metal mesh atop the FTO glass surface. Rinse and dry the sample with deionized water and compressed air. Next, place the sample on the platen of a hydraulic press with the metal mesh facing up.Cover the sample with a 100 micron thick cyclic olefin copolymer film with a glass transition temperature of 78 degrees Celsius. Heat the platens to 100 degrees Celsius, and then apply 15 millipascals of imprint pressure to the sample for five minutes. Pull the platens to 40 degrees Celsius before releasing the imprint pressure.Pressure and temperature are important prime interests in the imprint transfer step. Make sure your imprint and pressure is uniform and high enough for complete transfer. The temperature should be approximately 20 degrees higher than the substrate material glass transition temperature.Carefully peel the polymer film with the embedded mesh from the FTO glass surface to obtain the EMTE. To begin preparing a submicron EMTE, clean a three centimeter by three centimeter piece of FTO glass with liquid detergent and deionized water followed by sonication in isopropanol. Place the clean, dry FTO glass in a spin-coater, and apply 100 microliters of 4%by weight PMMA in anastole.Spin-coat the glass at 2500 RPM for 60 seconds to produce a 150 nanometer thick film. Bake the film at 170 degrees Celsius for 30 minutes, then start the electron beam lithography system and prepare a mesh pattern with a pattern generator. Place the sample in the electron beam lithography system and run the patterning process.Develop the PMMA by immersion in a one to three mixture of methyl-isopropyl-ketone and isopropanol for 60 seconds. Rinse the patterned sample with deionized water and dry it under a stream of compressed air. Next, place the patterned sample in copper-electroplating solution and connect the sample to the negative terminal of a two electrode electrodeposition apparatus.Connect the positive terminal to a copper, metal bar. Apply a constant current to achieve a current density of three milliamps per square centimeter for two minutes to plate 200 nanometers of copper on the sample. Rinse the sample with deionized water and immerse the sample in acetone for five minutes to dissolve the PMMA.Next, place the sample on the platen of a hydraulic press. Cover the sample with a 100 micron thick cyclic olefin co-polymer film with a glass transition temperature of 78 degrees Celsius. Heat the platens to 100 degrees Celsius and apply 15 millipascals of imprint pressure for five minutes.Cool the platens to 40 degrees Celsius before releasing the pressure. Carefully peel the film from the FTO glass to obtain the submicron EMTE. To begin sheet resistance measurements, first spread silver past on opposite edges of the EMTE and allow the paste to dry.Place the four probes of the sheet resistance measurement device on the lines of silver paste per the device manufacturer's instructions. Measure and record the sheet resistance. To perform optical transmission measurements, first place the EMTE on the sample holder of a calibrated UV vis spectrophotometer set to 100%transmittance.Align the sample perpendicular to the beam. Acquire a transmission spectrum of the EMTE to assess the electro-transparency. Copper EMTEs were fabricated with various grid patterns to evaluate the effect of the grid geometry on the electrode properties.The ratio of electrical conductance to optical conductance for copper EMTEs at 550 nanometers was over 1.5 times 10 to the fourth. Thicker meshes corresponded to lower optical transmittance and sheet resistance. Larger pitches corresponded to greater sheet resistance and transmittance.EMTEs were fabricated with various metals using a 50 micron pitch mesh, all of which showed flat, featureless transmittance spectra. With the same relationship between mesh thickness and transmittance, the transmittance and sheet resistance can first be tuned by adjusting the geometry and composition of the mesh. The sheet resistance of copper EMTEs was evaluated with respect to compressive and tensile bending tests.No significant change was observed for four millimeter and five millimeter compressive bending tests. Sheet resistance is gradually increased with tensile bending tests. No degradation and sheet resistance was observed over 24 hours of exposure to water isopropanol or a hot and humid atmosphere.New students can learn this technique within a few days. Once mastered, the whole fabrication process can be done in two to three hours and the equipment is ready. This technique paves the way for using scalable solution process fabrication methods to develop novel micro and nano structured devices, such as our self-anchored, high aspect ratio micro metal-mesh, embedded in flexible substrate.Many applications such as touch panels, displace sensors, and solar cells can benefit from our high performance, embedded metal mesh transparent electrodes. After watching this video, you should have a good understanding of how to use this solution-based fabrication process to produce metal-mesh transparent actuals. Thanks for watching, we're open to collaborations.

Research

Education

JoVE Core

JoVE Journal

Physics

Engineering

Unit 1

Gauss's Law

SCIENTISTS IN ACTION

Fabrication of Nano-engineered Transparent Conducting Oxides by Pulsed Laser Deposition

Nanosecond Pulsed  Laser Deposition (PLD) in the presence of a background gas allows the deposition  of metal oxides with tunable morphology, structure, ...

Picoinjection of Microfluidic Drops Without Metal Electrodes

Existing methods for picoinjecting reagents into microfluidic drops require metal electrodes integrated into the microfluidic chip. The integration of ...

Research and Development of High-performance Explosives

Developmental testing of high explosives for military applications involves small-scale formulation, safety testing, and finally detonation performance ...

Fabrication of Fully Solution Processed Inorganic Nanocrystal Photovoltaic Devices

We demonstrate a method for the preparation of fully solution processed inorganic solar cells from a spin and spray coating deposition of nanocrystal ...

Probing C84-embedded Si Substrate Using Scanning Probe Microscopy and Molecular Dynamics

Probing C84-embedded Si Substrate Using Scanning Probe Microscopy and Molecular Dynamics

This paper reports an array-designed C84-embedded Si substrate fabricated using a controlled self-assembly method in an ultra-high vacuum chamber. The ...

A High Performance Impedance-based Platform for Evaporation Rate Detection

This paper describes the method of a novel impedance-based platform for the detection of the evaporation rate. The model compound hyaluronic acid was ...

Detecting the Water-soluble Chloride Distribution of Cement Paste in a High-precision Way

To improve the accuracy of the chloride distribution along the depth of cement paste under cyclic wet-dry conditions, a new method is proposed to obtain a ...

Flow-assisted Dielectrophoresis: A Low Cost Method for the Fabrication of High Performance Solution-processable Nanowire Devices

Flow-assisted dielectrophoresis (DEP) is an efficient self-assembly method for the controllable and reproducible positioning, alignment, and selection of ...

Fabrication of Flexible Image Sensor Based on Lateral NIPIN Phototransistors

Flexible photodetectors have been intensely studied for the use of curved image sensors, which are a crucial component in bio-inspired imaging systems, ...

Fabrication of Superhydrophobic Metal Surfaces for Anti-Icing Applications

Several ways to produce superhydrophobic metal surfaces are presented in this work. Aluminum was chosen as the metal substrate due to its wide use in ...