preparing peanut worm homogenate and gel for fibrinogen-page to identify fibrinogenolytic agents

<meta charset="utf8"></head><body>Fibrinogen을 이용한 땅콩 벌레의 Fibrinogenolytic Agents 공개-PAGE

In recent years, due to the continued rise of thrombotic diseases, thrombotic diseases have become a new major global health problem1. At present, antithrombotic drugs are classified into three groups: anti-platelet aggregation drugs, anticoagulants, and thrombolytic drugs. Among them, thrombolytic drugs, such as urokinase (UK), tissue plasminogen activator (tPA), etc., are the only clinically used drugs that can hydrolyze thrombus2. Meanwhile, more safe and effective thrombolytic drugs are being developed by the identification of novel thrombolytic agents3.
However, the identification of novel thrombolytic agents is time-consuming and labor-intensive, which mainly involves the separation/purification and characterization/checking stages. The former is to separate each component, and the latter is to display their fibrino(geno)lytic activities4,5. In previous studies, despite the fact we have successfully isolated a novel fibrino(geno)lytic enzyme (sFE) from the peanut worm (Sipunculus nudus) by affinity chromatography and fibrin(ogen) plate assay6,7,8, these processes are such time and labor-consuming. First, it is necessary to determine whether the peanut worm homogenates have fibrino(geno)lytic activity by the fibrin(ogen) plate method and reaction products based on PAGE9. Then, a series of chromatography, such as ion exchange chromatography, gel filtration chromatography, affinity chromatography, and other methods, have to be carried out for separation and purification10,11. Subsequently, the fibrin plate assay is performed again to check the fibrinogenolytic activity of each separated component. Finally, native-PAGE and sodium dodecyl sulfate (SDS)-PAGE are performed to determine the molecular weight of the active fibrinogenolytic agents12. Therefore, it is critical to rapidly separate and display the active fibrinogenolytic agents.
To rapidly separate and display the active fibrinogenolytic agents in the peanut worm homogenates, a new fibrinogen-PAGE method was developed by combining the PAGE and fibrinogen plate methods, i.e., the substrates of fibrinogenolytic agents fibrinogen were added to the native-PAGE gel. After native-PAGE, the components were separated by their molecular weight. Meanwhile, each active fibrinogenolytic component can be displayed by staining. By this method, we successfully detected more than one active fibrinogenolytic agent of peanut worm&#160;homogenate within 6 h. Moreover, this fibrinogen-PAGE method is time and cost-friendly. Furthermore, this method could be used to study the fibrinogenolytic agents of the other organisms.

<meta charset="utf8"></head><body>저자 스포트라이트: Fibrinogenlytic 연구를 위한 시간 및 비용 효율적인 Fibrinogen-PAGE

Fibrinogen-Polyacrylamide Gel Electrophoresis를 통한 Sipunculus nudus 의 활성 Fibrinogenolytic Agents의 신속한 분리 및 표시

Our research is focused on the fibrinolytic system. In this study, we are trying to simplify the mass for screening of fibrinogenolytical agents in peanut worms using Fibrinogen-PAGE technique. We have developed a new Fibrinogen-PAGE method by combining the PAGE and Fibrinogen plate methods.Compared to the other technics currently used, our protocol consists of a 10 year study separate and display the active fibrinogenolytic genes within the same pathogen. Overall, this mass is time and cost effective. With our findings, the discovery of neuro-fibrinogenolytic agents will become simple and can speed up the development of novel drugs that can be used to treat a variety of cardiovascular and other diseases.Our laboratory will focus on studying the coagulation and the fibrinogenolytic systems in different organisms to isolate and screen for novel fibrinogenolytic agents that can be useful for therapeutics.

Fibrinogen-PAGE용 Peanut Worm Homogenate 및 Gel 제조하여 Fibrinogenolytic Agents 식별

preparing-peanut-worm-homogenate-gel-for-fibrinogen-page-to-identify

Research

JoVE Journal

Biochemistry

Preparing Peanut Worm Homogenate and Gel for Fibrinogen-PAGE to Identify Fibrinogenolytic Agents

139 조회수. 시작하려면 땅콩 벌레 50g의 무게를 측정하고 식염수 150ml와 함께 균질기에 넣으십시오. 24, 60 초 동안 000 분당 회전수에 균질화하십시오. 균질액을 원심분리하고 추가 공정을 위해 상층액을 수집합니다.피브리노겐 폴리아크릴아미드 겔 제제의 경우 50밀리리터 유리 비커에 0.01g의 피브리노겐 및 기타 시약을 추가합니다. 비커를 섭씨 37도에서 30?...

비디오: Fibrinogen-PAGE용 Peanut Worm Homogenate 및 Gel 제조하여 Fibrinogenolytic Agents 식별

Rapid Separation and Display of Active Fibrinogenolytic Agents in Sipunculus nudus through Fibrinogen-Polyacrylamide Gel Electrophoresis

Fibrinogenolytic agents that can dissolve fibrinogen directly have been widely used in anti-coagulation treatment. Generally, identifying new fibrinogenolytic agents requires the separation of each component first and then checking their fibrinogenolytic activities. Currently, polyacrylamide gel electrophoresis (PAGE) and chromatography are mostly used in the separating stage. Meanwhile, the fibrinogen plate assay and reaction products based PAGE are usually adopted to display their fibrinogenolytic activities. However, because of the spatiotemporal separation of those two stages, it is impossible to separate and display the active fibrinogenolytic agents with the same gel. To simplify the separating and displaying processes of fibrinogenolytic agent identification, we constructed a new fibrinogen-PAGE method to rapidly separate and display the fibrinogenolytic agents of peanut worms (Sipunculus nudus)&#160;in this study. This method includes fibrinogen-PAGE preparation, electrophoresis, renaturation, incubation, staining, and decolorization. The fibrinogenolytic activity and molecular weight of the protein can be detected simultaneously. According to this method, we successfully detected more than one active fibrinogenolytic agent of peanut wormhomogenate within 6 h. Moreover, this fibrinogen-PAGE method is time and cost-friendly. Furthermore, this method could be used to study the fibrinogenolytic agents of the other organisms.

Here, we present a fibrinogen-polyacrylamide gel electrophoresis (PAGE) protocol to rapidly separate and display the fibrinogenolytic agents of Sipunculus nudus.

Fibrinogenolytic agents that can dissolve fibrinogen directly have been widely used in anti-coagulation treatment. Generally, identifying new ...

연구

생화학

To begin, weigh 50 grams of peanut worms and add them into the homogenizer, along with 150 milliliters of saline. Homogenize at 24, 000 RPM for 60 seconds. Centrifuge the homogenate and collect the supernatant for further processes.For fibrinogen polyacrylamide gel preparation, add 0.01 grams of fibrinogen and other reagents into a 50 milliliter glass beaker. Warm the beaker at 37 degrees Celsius for 30 minutes. After adding acrylamide, pour the separating gel mixture into a 10 well gel mold.Then add two milliliters of double distilled water to the gel mold and incubate it for 30 minutes. Invert the mold to remove the water. Next, prepare the loading gel similarly, and pour it onto the same mold as earlier.Finally, insert the comb for well formation.

Fibrinogen-PAGE for Fibrinogenolytic Agent Analysis in Peanut Worm Homogenate

To begin, prepare a gel for fibrinogen phage and place it in the electrophoresis tank together with the glue mold. Pour 1, 300 milliliters of electrophoresis solution into the tank and take out the comb from the gel. Mix 5 microliters of 5x non-denaturing loading buffer with 20 microliters each of fibrinogenolytic enzyme and peanut worm homogenate.Load the mixture into the prepared gel and initiate the electrophoresis at 80 volts for 30 minutes or 120 volts for 20 minutes. Remove the gel from the glue mold and transfer it into a plastic box. Add Tris-HCL and Triton into the box and incubate it on a shaker at 60 to 70 RPM for 10 minutes.Remove the wash buffer and incubate the gel with 50 milliliters of 0.05 molar Tris-HCL. After removing the buffer, incubate the gel with 50 milliliters of staining, followed by de-colorization solution at 60 to 70 RPM for 30 minutes each. The peanut worm homogenate displayed bands corresponding to molecular weights of 25, 33, 43, and 70 kilo-daltons or higher.