Name: insect-machine hybrid system: remote radio control of a freely flying beetle (mercynorrhina torquata)
Uploaded: 2016-09-02T13:00:00
Description: Watch this Scientific Journal Video about Insect-machine Hybrid System: Remote Radio Control of a Freely Flying Beetle Mercynorrhina torquata at JoVE.com

This material is based on the works supported by Nanyang Assistant Professorship (NAP, M4080740), Agency for Science, Technology and Research (A*STAR) Public Sector Research Funding (PSF, M4070190), A*STAR-JST (The Japan Science and Technology Agency) joint grant (M4070198), and Singapore Ministry of Education (MOE2013-T2-2-049). The authors would like to thank Mr. Roger Tan Kay Chia, Prof. Low Kin Huat, Mr. Poon Kee Chun, Mr. Chew Hock See, Mr. Lam Kim Kheong and Dr. Mao Shixin at School of MAE for their support in setting up and maintaining the research facilities. The authors thank Prof. Michel Maharbiz (U.C. Berkeley) his advice and discussion, Prof. Kris Pister and his group (U.C. Berkeley) for their support in providing the GINA used in this study.

1. Study Animal
<ol>
	<li>Rear individual Mecynorrhina torquata beetles (6 cm, 8 g) in separate plastic containers with wood pellet bedding.</li>
	<li>Feed each beetle a cup of sugar jelly (12 ml) every 3 days.</li>
	<li>Keep the temperature and humidity of the rearing room at 25 &#176;C and 60%, respectively.</li>
	<li>Test the flight capability of each beetle before implanting thin wire electrodes.
	<ol>
		<li>Gently throw a beetle into the air. If the beetle can fly for longer than 10 sec for 5 consecutive trials, c...

<ol>
	<li>Kutsch, W., Schwarz, G., Fischer, H., Kautz, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Wireless+Transmission+of+Muscle+Potentials+During+Free+Flight+of+a+Locust.">Wireless Transmission of Muscle Potentials During Free Flight of a Locust.</a> J. Exp. Biol. 185 (1), 367-373 (1993).</li><li>Fischer, H., Kautz, H., Kutsch, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Radiotelemetric+2-Channel+Unit+for+Transmission+of+Muscle+Potentials+During+Free+Flight+of+the+Desert+Locust,+Schistocerca+Gregaria.">A Radiotelemetric 2-Channel Unit for Transmission of Muscle Potentials During Free Flight of the Desert Locust, Schistocerca Gregaria.</a> J. Neurosci. Methods. 64 (1), 39-45 (1996).</li><li>Ando, N., Shimoyama, I., Kanzaki, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Dual-Channel+FM+Transmitter+for+Acquisition+of+Flight+Muscle+Activities+from+the+Freely+Flying+Hawkmoth,+Agrius+Convolvuli.">A Dual-Channel FM Transmitter for Acquisition of Flight Muscle Activities from the Freely Flying Hawkmoth, Agrius Convolvuli.</a> J. Neurosci. Methods. 115 (2), 181-187 (2002).</li><li>Sanchez, C. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Locomotion+control+of+hybrid+cockroach+robots.">Locomotion control of hybrid cockroach robots.</a> J. R. Soc. Interface. 12 (105), (2015).</li><li>Sato, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+cyborg+beetle:+insect+flight+control+through+an+implantable,+tetherless+microsystem.">A cyborg beetle: insect flight control through an implantable, tetherless microsystem.</a> , 164-167 (2008).</li><li>Bozkurt, A., Gilmour, R. F., Lal, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Balloon-Assisted+Flight+of+Radio-Controlled+Insect+Biobots.">Balloon-Assisted Flight of Radio-Controlled Insect Biobots.</a> IEEE Trans. Biomed. Eng. 56 (9), 2304-2307 (2009).</li><li>Sato, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Remote+Radio+Control+of+Insect+Flight.">Remote Radio Control of Insect Flight.</a> Front. Neurosci. 3, (2009).</li><li>Daly, D. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Pulsed+UWB+Receiver+SoC+for+Insect+Motion+Control.">A Pulsed UWB Receiver SoC for Insect Motion Control.</a> IEEE J. Solid-State Circuits. 45 (1), 153-166 (2010).</li><li>Maharbiz, M. M., Sato, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cyborg+Beetles.">Cyborg Beetles.</a> Sci. Am. 303 (6), 94-99 (2010).</li><li>Tsang, W. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Remote+control+of+a+cyborg+moth+using+carbon+nanotube-enhanced+flexible+neuroprosthetic+probe.">Remote control of a cyborg moth using carbon nanotube-enhanced flexible neuroprosthetic probe.</a> , 39-42 (2010).</li><li>Hinterwirth, A. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Wireless+Stimulation+of+Antennal+Muscles+in+Freely+Flying+Hawkmoths+Leads+to+Flight+Path+Changes.">Wireless Stimulation of Antennal Muscles in Freely Flying Hawkmoths Leads to Flight Path Changes.</a> PloS ONE. 7 (12), (2012).</li><li>Whitmire, E., Latif, T., Bozkurt, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Kinect-based+system+for+automated+control+of+terrestrial+insect+biobots.">Kinect-based system for automated control of terrestrial insect biobots.</a> , 1470-1473 (2013).</li><li>Sato, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Deciphering+the+Role+of+a+Coleopteran+Steering+Muscle+via+Free+Flight+Stimulation.">Deciphering the Role of a Coleopteran Steering Muscle via Free Flight Stimulation.</a> Curr. Biol. 25 (6), 798-803 (2015).</li><li>Erickson, J. C., Herrera, M., Bustamante, M., Shingiro, A., Bowen, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effective+Stimulus+Parameters+for+Directed+Locomotion+in+Madagascar+Hissing+Cockroach+Biobot.">Effective Stimulus Parameters for Directed Locomotion in Madagascar Hissing Cockroach Biobot.</a> PLoS ONE. 10 (8), e0134348 (2015).</li><li>Zhaolin, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+preliminary+study+of+motion+control+patterns+for+biorobotic+spiders.">A preliminary study of motion control patterns for biorobotic spiders.</a> , 128-132 (2014).</li><li>Feng, C., Chao, Z., Hao Yu, C., Sato, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Insect-machine+hybrid+robot:+Insect+walking+control+by+sequential+electrical+stimulation+of+leg+muscles.">Insect-machine hybrid robot: Insect walking control by sequential electrical stimulation of leg muscles.</a> , 4576-4582 (2015).</li><li>Cao, F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Biological+Micro+Actuator:+Graded+and+Closed-Loop+Control+of+Insect+Leg+Motion+by+Electrical+Stimulation+of+Muscles.">A Biological Micro Actuator: Graded and Closed-Loop Control of Insect Leg Motion by Electrical Stimulation of Muscles.</a> PLoS ONE. 9 (8), e105389 (2014).</li><li>Zhao, H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Neuromechanism+Study+of+Insect-Machine+Interface:+Flight+Control+by+Neural+Electrical+Stimulation.">Neuromechanism Study of Insect-Machine Interface: Flight Control by Neural Electrical Stimulation.</a> PLoS ONE. 9 (11), e113012 (2014).</li><li>Tsang, W. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Flexible+Split-Ring+Electrode+for+Insect+Flight+Biasing+Using+Multisite+Neural+Stimulation.">Flexible Split-Ring Electrode for Insect Flight Biasing Using Multisite Neural Stimulation.</a> IEEE Trans. Biomed. Eng. 57 (7), 1757-1764 (2010).</li><li>Barron, A. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Anaesthetising+Drosophila+for+behavioural+studies.">Anaesthetising Drosophila for behavioural studies.</a> J. Insect Physiol. 46 (4), 439-442 (2000).</li><li>Cooper, J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Anesthesia,+Analgesia,+and+Euthanasia+of+Invertebrates.">Anesthesia, Analgesia, and Euthanasia of Invertebrates.</a> ILAR Journal. 52 (2), 196-204 (2011).</li><li>Miller, T. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Insect neurophysiological techniques. , (2012).</li><li>Leary, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> AVMA guidelines for the euthanasia of animals. , (2013).</li><li>Heath, B., West, G., Heard, D., Caulkett, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mobile+Inhalant+Anesthesia+Techniques.">Mobile Inhalant Anesthesia Techniques.</a> in Zoo Animal and Wildlife Immobilization and Anesthesia. , 75-80 (2008).</li><li>Mischiati, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Internal+models+direct+dragonfly+interception+steering.">Internal models direct dragonfly interception steering.</a> Nature. 517 (7534), 333-338 (2015).</li><li>Kutsch, W., Berger, S., Kautz, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Turning+Manoeuvres+in+Free-Flying+Locusts:+Two-Channel+Radio-Telemetric+Transmission+of+Muscle+Activity.">Turning Manoeuvres in Free-Flying Locusts: Two-Channel Radio-Telemetric Transmission of Muscle Activity.</a> J. Exp. Zoolog. Part A Comp. Exp. Biol. 299 (2), 139-150 (2003).</li><li>Wang, H., Ando, N., Kanzaki, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Active+Control+of+Free+Flight+Manoeuvres+in+a+Hawkmoth,+Agrius+Convolvuli.">Active Control of Free Flight Manoeuvres in a Hawkmoth, Agrius Convolvuli.</a> J. Exp. Biol. 211 (3), 423-432 (2008).</li><li>Sato, H., Maharbiz, M. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+developments+in+the+remote+radio+control+of+insect+flight.">Recent developments in the remote radio control of insect flight.</a> Front. Neurosci. 4, (2010).</li><li>Tien Van, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Flight+behavior+of+the+rhinoceros+beetle+Trypoxylus+dichotomus+during+electrical+nerve+stimulation.">Flight behavior of the rhinoceros beetle Trypoxylus dichotomus during electrical nerve stimulation.</a> Bioinsp. Biomim. 7 (3), 036021 (2012).</li><li>Sane, S. P., Dickinson, M. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+control+of+flight+force+by+a+flapping+wing:+lift+and+drag+production.">The control of flight force by a flapping wing: lift and drag production.</a> J. Exp. Biol. 204 (15), 2607-2626 (2001).</li><li>de Croon, G. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design,+aerodynamics+and+autonomy+of+the+DelFly.">Design, aerodynamics and autonomy of the DelFly.</a> Bioinsp. Biomim. 7 (2), 025003 (2012).</li><li>Ma, K. Y., Chirarattananon, P., Fuller, S. B., Wood, R. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Controlled+Flight+of+a+Biologically+Inspired,+Insect-Scale+Robot.">Controlled Flight of a Biologically Inspired, Insect-Scale Robot.</a> Science. 340 (6132), 603-607 (2013).</li></ol>

The implantation process is important, as it affects the reliability of the experiment. The electrodes should be inserted into the muscle at a depth of 3 mm or less depending on the size of the beetle (avoiding contact with nearby muscles). If the electrodes touch the nearby muscles, undesirable motor actions and behaviors may occur owing to the contraction of nearby muscles. The two electrodes should be well aligned to ensure that no short circuits occur. When melting and reflowing beeswax using a soldering iron, the ex...

An insect-machine hybrid system, often referred to as a cyborg insect or biobot, is the fusion of a living insect platform with a miniature mounted electronic device. The electronic device, which is wirelessly commanded by a remote user, outputs an electrical signal to electrically stimulate neuromuscular sites in the insect via implanted wire electrodes to induce user desired motor actions and behaviors. In the early stages of this research field, researchers were limited to conducting wireless recording of the muscular action of an insect, using simple analog circuits comprised of surface-mounted components1-3. The development of system-on-a-chip technology with radio frequency functionality enabled not only the wireless recording of neuromuscular signals but also the electrical stimulation of the neuromuscular sites in living insects. At present, a built-in radio microcontroller is small enough to be mounted on living insects without causing any obstructions to their locomotion4-13.
The development of the built-in radio microcontroller allows researchers to determine electrical stimulation protocols to induce desired motor actions to control the locomotion of the insect of interest. On the ground, researchers have demonstrated walking control by stimulating the neuromuscular sites of cockroaches4,12,14, spiders15, and beetles16,17. In the air, the initiation and cessation of flight were achieved using different methods such as the stimulation of the optic lobes (the massive neural cluster of a compound eye) in beetles7,9 and brain sub-regions in bees18, whereas turning control has been demonstrated by stimulating the antennae muscles and nervous system of the abdomens in moths11,19 and the flight muscles of beetles7,9,13. In most cases, a built-in radio microcontroller was integrated on a custom-designed printed circuit board to produce a miniature wireless stimulator (backpack), which was mounted on the insect of interest. This allows wireless electrical stimulation to be applied to a freely walking or flying insect. Such a microcontroller-mounted insect is what is referred to as an insect-machine hybrid system. 
This study describes the experimental protocols for building an insect-machine hybrid system, wherein a living beetle is employed as the insect platform, and instructs on how to operate the robot and test its flight control systems. The third axillary sclerite (3Ax) muscle was chosen as the muscle of interest for electrical stimulation and demonstration of left or right turning control13. A pair of thin silver wire electrodes was implanted in both the left and right 3Ax muscles. Moreover, a backpack was mounted on the living beetle. The other ends of the wire electrode were connected to the output pins of the microcontroller. The backpack was small enough for the beetle to carry in flight. Thus, this allows an experimentalist to remotely stimulate the muscle of interest of an insect in free flight and investigate its reactions to the stimulations.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>Mecynorrhina torquata beetle</td>
			<td>Kingdom of Beetle Taiwan</td>
			<td></td>
			<td>10 g, 8 cm, pay load capacity is 30% of the body mass 
			Aproval of importing and using by Agri-Food and Veterinary Authority of Singapore (AVA; HS code: 01069000, product code: ALV002).</td>
		</tr>
		<tr>
			<td>Wireless backpack stimulator</td>
			<td>Custom</td>
			<td></td>
			<td>TI CC2431 micocontroler 
			The board is custom made based on the GINA board from Prof. Kris Pister&#8217;s lab. The layout of GINA board can be found at&#160;&#160;&#160; https://openwsn.atlassian.net/wiki/display/OW/GINA</td>
		</tr>
		<tr>
			<td>Wii Remote control</td>
			<td>Nintendo</td>
			<td></td>
			<td>Bluetooth remote control to send the command to the operator laptop</td>
		</tr>
		<tr>
			<td>BeetleCommander v1.8</td>
			<td>Custom. Maharbiz group at UC Berkeley and Sato group at NTU</td>
			<td></td>
			<td>Establish the wireless communication of the backpack and the operator laptop. Configure the stimulus parameters and log the positional data. Visualize the flight data.</td>
		</tr>
		<tr>
			<td>GINA base station</td>
			<td>Kris Pister group at UC Berkeley</td>
			<td></td>
			<td>TI MSP430F2618 and AT86RF231</td>
		</tr>
		<tr>
			<td>Motion capture system</td>
			<td>VICON</td>
			<td>T160</td>
			<td>8 cameras for a flight arena of 12.5 x 8 x 4 m</td>
		</tr>
		<tr>
			<td>Motion capture system</td>
			<td>VICON</td>
			<td>T40s</td>
			<td>12 cameras for a flight arena of 12.5 x 8 x 4 m</td>
		</tr>
		<tr>
			<td>Micro battery</td>
			<td>Fullriver</td>
			<td>&#160;201013HS10C&#160;</td>
			<td>3.7V, 10 mAh</td>
		</tr>
		<tr>
			<td>Retro reflective tape</td>
			<td>Reflexite</td>
			<td>V92-1549-010150</td>
			<td>V92 reflective tape, silver color</td>
		</tr>
		<tr>
			<td>PFA-Insulated Silver Wire&#160;</td>
			<td>A-M systems</td>
			<td>786000</td>
			<td>127 &#181;m bare, 177.8 &#181;m coated, 3 mm bare silver flame exposed at tips</td>
		</tr>
		<tr>
			<td>SMT Micro Header&#160;</td>
			<td>SAMTEC</td>
			<td>FTSH-110-01-L-DV</td>
			<td>0.3 x 6 mm, bend to make a 3 mm long slider to secure the electrode into the PCB header.</td>
		</tr>
		<tr>
			<td>Beeswax</td>
			<td></td>
			<td></td>
			<td>Secure the electrodes</td>
		</tr>
		<tr>
			<td>Dental Wax</td>
			<td>Vertex</td>
			<td></td>
			<td>Immobilize the beetle</td>
		</tr>
		<tr>
			<td>Insect pin</td>
			<td>ROBOZ</td>
			<td>RS-6082-30</td>
			<td>Size&#160; 00; 0.3mm Rod diameter; 0.03 mm tip width; 38 mm Length&#160; 
			Make electrode guiding holes on cuticle</td>
		</tr>
		<tr>
			<td>Tweezers</td>
			<td>DUMONT</td>
			<td>RS-5015</td>
			<td>Pattern #5; .05 X .01mm Tip Size; 110mm Length 
			Dissecting and implantation</td>
		</tr>
		<tr>
			<td>Scissors</td>
			<td>ROBOZ</td>
			<td>RS-5620</td>
			<td>Vannas Micro Dissecting Spring Scissors; Straight; 3mm Cutting Edge; 0.1mm Tip Width; 3&#34; Overall Length&#160; 
			Dissecting and implantation</td>
		</tr>
		<tr>
			<td>Potable soldering iron</td>
			<td>DAIYO</td>
			<td>DS241</td>
			<td>Reflow beeswax</td>
		</tr>
		<tr>
			<td>Hotplate&#160;</td>
			<td>CORNING</td>
			<td>PC-400D</td>
			<td>Melting beeswax and dental wax</td>
		</tr>
		<tr>
			<td>Flourescent lamp</td>
			<td>Philips</td>
			<td>TL5 14W</td>
			<td>Light the entire flight arena with 30 panels (60 x 60 cm2). Each panel has 3 lamps. 
			14 W, 549 mm x 17 mm&#160;</td>
		</tr>
	</tbody>
</table>

insect-machine hybrid system: remote radio control of a freely flying beetle (mercynorrhina torquata)

The rise of radio-enabled digital electronic devices has prompted the use of small wireless neuromuscular recorders and stimulators for studying in-flight insect behavior. This technology enables the development of an insect-machine hybrid system using a living insect platform described in this protocol. Moreover, this protocol presents the system configuration and free flight experimental procedures for evaluating the function of the flight muscles in an untethered insect. For demonstration, we targeted the third axillary sclerite (3Ax) muscle to control and achieve left or right turning of a flying beetle. A thin silver wire electrode was implanted on the 3Ax muscle on each side of the beetle. These were connected to the outputs of a wireless backpack (i.e., a neuromuscular electrical stimulator) mounted on the pronotum of the beetle. The muscle was stimulated in free flight by alternating the stimulation side (left or right) or varying the stimulation frequency. The beetle turned to the ipsilateral side when the muscle was stimulated and exhibited a graded response to an increasing frequency. The implantation process and volume calibration of the 3 dimensional motion capture camera system need to be carried out with care to avoid damaging the muscle and losing track of the marker, respectively. This method is highly beneficial to study insect flight, as it helps to reveal the functions of the flight muscle of interest in free flight.

The electrode implantation procedure is presented in Figure 2. Thin silver wire electrodes were implanted into the 3Ax muscle of the beetle through small holes pierced on the soft cuticle on the muscle (Figures 2d-e). This soft cuticle is found just above the apodema of the basalar muscle after removing the anterior part of the metepisternum (Figures 2d-c). The electrodes were then secured using beeswax (...

Watch this Scientific Journal Video about Insect-machine Hybrid System: Remote Radio Control of a Freely Flying Beetle Mercynorrhina torquata at JoVE.com

Insect-machine Hybrid System: Remote Radio Control of a Freely Flying Beetle Mercynorrhina torquata

This protocol describes the process of constructing an insect-machine hybrid system and carrying out wireless electrical stimulation of the flight muscles required to control the turning motion of a flying insect.

Insect-machine Hybrid System: Remote Radio Control of a Freely Flying Beetle (Mercynorrhina torquata)

The rise of radio-enabled digital electronic devices has prompted the use of small wireless neuromuscular recorders and stimulators for studying in-flight ...

This video describes the process of constructing an insect-machine hybrid system for wireless electrical stimulation of the flight muscles in a freely flying insect. This method can help answer key question in insect research field, such as function of insect flight muscle in flight. The main advantage of this technique is that we can investigate the effect of activating special flight muscle on the flight of three different insect by using a tiny remote stimulator.Through this method, kind of our insight into the function of the fly muscles in beetles. It can also be applied to other insects or other muscle groups, such as in the leg or antenna. To begin, test the flight capability of the beetles to identify ones suitable for experimentation.Select a beetle and gently throw it into the air in a large enclosed room. To recapture a beetle, just make the room dark, which will cause it to stop flying. If the beetle flies for more than 10 seconds on five consecutive trials, then it may be used for the experiment.First, anesthetize the beetle using a carbon dioxide chamber. Leave it there for a minute. Next, soften some dental wax in hot water for 10 seconds.Then, place the anesthetized beetle on a wooden block, and immobilize it with the wax. Next, cut insulated silver wire into 25-millimeter lengths to function as electrodes. At both ends, expose three millimeters of bare silver wire using a flame.Now, dissect the top surface of the beetle's cuticle with fine-tipped scissors to create a small four by four-millimeter window in the metepisternum, exposing the soft brown-colored cuticle beneath. Just beneath the cuticle is the 3AX muscle. Next, using a double-zero insect pin, pierce two holes in the brown cuticle two millimeters apart.Then, insert a wire electrode through each hole and into each 3AX muscle. Penetrate each wire three millimeters into the tissue. Any mistake in this process can lead to long reaction or muscle deficit, so identify the muscle of interest carefully, and implant the electrode precisely.Now, secure the electrodes using beeswax to avoid contacts and short circuits. If needed, reflow the beeswax over the cuticle by remelting it with a soldering iron. Now, to check if the implantation is correct, lift the electra of the beetle to observe the movement of the 3AX muscle while stimulating it with an electrode.Details on the backpack device are provided in the text protocol. To attach it, first, clean the wax layer off of the pronotum surface using double-sided tape. Then, attach the backpack using double-sided tape.Next, connect the ends of the implanted electrodes to the outputs of the backpack. Then, wrap retro-reflective tape around the microbattery, and attach it to the top of the backpack using more double-sided tape. Ensure that the terminals are accessible.This tape-wrapped battery will function as a marker for the motion capture cameras. The wireless control system includes a receiver for the remote controller, a laptop computer to run the custom flight control software, a base station, the backpack, and the motion capture system. First, connect the base station and receiver of the remote controller to the laptop computer using USB connections.Then, switch on the motion capture system and connect it to the laptop computer via the ethernet port. Now, in the software, perform a volume calibration using the manufacturer supplied calibration wand. In the software, click and drag to select all the cameras on the system menu of the resources panel.Then, click on the 3D Perspective menu, and select Camera to change to the camera view. Next, click on the Camera tab on the Tools panel to show the calibration set-up, and select Start from the Create Camera Masks menu to eliminate noise from the cameras. Once the noise is masked, shown in blue, stop the process.Now, from the Wand menu, select 5 Marker Wand L-Frame. Then, go to the L-Frame menu on the Camera tab and do the same. Next, set the wand count to 2500.Then, click Start on the Calibrate Cameras menu, and wave the calibration wand through the entire motion capture space. The calibration process stops when the wand count reaches 2500. After the calibration, put the wand on the floor in the middle of the motion capture space.Then, click on Start on the Set Volume Origin menu to set the origin of the motion capture space. Then, start a test by clicking on the Capture tab in the Tools panel, and then clicking Start from the Capture menu. Now, check that the system works by recording the motion path of a marker while it is waved by a user.To check the quality of the recording, click on Runs the Reconstruct Pipeline to reconstruct the positions of the marker and check the quality of the recording. If the marker is lost for distances exceeding 200 millimeters, recalibrate the system. Now, check that the system on the beetle works.Connect the terminals of the microbattery to the power pins of the backpack. Then, click the Start command on the software, and check for a displayed connection status. If it is registering, a free flight experiment can now be made.Carry out the free flight experiment in a flight arena. In this example, the arena measures 16 by eight by four cubic meters, with part of the arena outside of the motion tracking area. In the flight software, input the appropriate parameters, including the voltage, pulse width, frequency, and stimulation duration.Now, release the backpack-mounted beetle into the flight arena, and wait until the beetle enters the motion capture space to manually trigger the stimulation. Press the appropriate command button on the remote to stimulate the target muscle on the left or right side of the beetle, and observe the beetle's reaction. Later, reconstruct the data using 3D graphing software.Select one of the trials recorded in the data list of the beetle display window, and click Export Panda to copy the data of that trial to the Analysis folder. In the graphing software, press N on the keyboard to combine the stimulus signal with the recorded trajectory. Press I to show the trajectory of the beetle with the highlighted stimulation periods.The activation of the 3AX muscle was found to cause a reduction in the wing beat amplitude of the ipsilateral side, thus resulting in the beetle performing an ipsilateral turn in free flight. The turning rate of the beetle was then graded as a function of the stimulation frequency. Notice that the frequency of stimulation of the right side muscle neatly coordinated with the degree of turning to the right side.Once mastered, this technique can be done in 20 minutes if it's performed properly. While attempting this procedures, it's important to remember to identify the muscle correctly and position the implant correctly to avoid isolating his house. Following this procedure, the auto-fly muscle lie supular muscle or basular muscle, can be stimulated to produce different behavior of the insect.After its development, this technique paves a way for researchers in the field of insect-related research to explore the function of their flight muscle of 3D flying insects.

insect-machine-hybrid-system-remote-radio-control-freely-flying

Research

JoVE Journal

Neuroscience

Localizing Protein in 3D Neural Stem Cell Culture: a Hybrid Visualization Methodology

The importance of 3-dimensional (3D) topography in influencing neural stem and progenitor cell (NPC) phenotype is widely acknowledged yet challenging to study. When dissociated from embryonic or post-natal brain, single NPCs will proliferate in suspension to form neurospheres. Daughter cells within these cultures spontaneously adopt distinct developmental lineages (neurons, oligodendrocytes, and astrocytes) over the course of expansion despite being exposed to the same extracellular milieu. This progression recapitulates many of the stages observed over the course of neurogenesis and gliogenesis in post-natal brain and is often used to study basic NPC biology within a controlled environment. Assessing the full impact of 3D topography and cellular positioning within these cultures on NPC fate is, however, difficult. To localize target proteins and identify NPC lineages by immunocytochemistry, free-floating neurospheres must be plated on a substrate or serially sectioned. This processing is required to ensure equivalent cell permeabilization and antibody access throughout the sphere. As a result, 2D epifluorescent images of cryosections or confocal reconstructions of 3D Z-stacks can only provide spatial information about cell position within discrete physical or digital 3D slices and do not visualize cellular position in the intact sphere. Here, to reiterate the topography of the neurosphere culture and permit spatial analysis of protein expression throughout the entire culture, we present a protocol for isolation, expansion, and serial sectioning of post-natal hippocampal neurospheres suitable for epifluorescent or confocal immunodetection of target proteins. Connexin29 (Cx29) is analyzed as an example. Next, using a hybrid of graphic editing and 3D modelling softwares rigorously applied to maintain biological detail, we describe how to re-assemble the 3D structural positioning of these images and digitally map labelled cells within the complete neurosphere. This methodology enables visualization and analysis of the cellular position of target proteins and cells throughout the entire 3D culture topography and will facilitate a more detailed analysis of the spatial relationships between cells over the course of neurogenesis and gliogenesis in vitro.
Both Imbeault and Valenzuela contributed equally and should be considered joint first authors.

Here, we describe how to produce, expand, and immunolabel postnatal hippocampal neural progenitor cells (NPCs) in three-dimensional (3D) culture. Next, using hybrid visualization technologies, we demonstrate how digital images of immunolabelled cryosections can be used to reconstruct and map the spatial position of immunopositive cells throughout the entire 3D neurosphere.

The importance of 3-dimensional (3D) topography in influencing neural stem and progenitor cell (NPC) phenotype is widely acknowledged yet challenging to ...

A Simplified Method for Ultra-Low Density, Long-Term Primary Hippocampal Neuron Culture

Culturing primary hippocampal neurons in vitro facilitates mechanistic interrogation of many aspects of neuronal development. Dissociated embryonic hippocampal neurons can often grow successfully on glass coverslips at high density under serum-free conditions, but low density cultures typically require a supply of trophic factors by co-culturing them with a glia feeder layer, preparation of which can be time-consuming and laborious. In addition, the presence of glia may confound interpretation of results and preclude studies on neuron-specific mechanisms. Here, a simplified method is presented for ultra-low density (~2,000 neurons/cm2), long-term (&#62;3 months) primary hippocampal neuron culture that is under serum free conditions and without glia cell support. Low density neurons are grown on poly-D-lysine coated coverslips, and flipped on high density neurons grown in a 24-well plate. Instead of using paraffin dots to create a space between the two neuronal layers, the experimenters can simply etch the plastic bottom of the well, on which the high density neurons reside, to create a microspace conducive to low density neuron growth. The co-culture can be easily maintained for &#62;3 months without significant loss of low density neurons, thus facilitating the morphological and physiological study of these neurons. To illustrate this successful culture condition, data are provided to show profuse synapse formation in low density cells after prolonged culture. This co-culture system also facilitates the survival of sparse individual neurons grown in islands of poly-D-lysine substrates and thus the formation of autaptic connections.

Low density cultures of primary hippocampal neurons usually require glia feeder layer to supply neurotrophic factors and sustain longevity. We describe here a simplified method to culture ultra-low density neurons on glass coverslips in the presence of a high density neuronal feeder layer, which facilitates investigation of specific neuronal-autonomous mechanisms.

Culturing primary hippocampal neurons in vitro facilitates mechanistic interrogation of many aspects of neuronal development. Dissociated embryonic ...

Optical Control of a Neuronal Protein Using a Genetically Encoded Unnatural Amino Acid in Neurons

Photostimulation is a noninvasive way to control biological events with excellent spatial and temporal resolution. New methods are desired to photo-regulate endogenous proteins expressed in their native environment. Here, we present an approach to optically control the function of a neuronal protein directly in neurons using a genetically encoded unnatural amino acid (Uaa). By using an orthogonal tRNA/aminoacyl-tRNA synthetase pair to suppress the amber codon, a photo-reactive Uaa 4,5-dimethoxy-2-nitrobenzyl-cysteine (Cmn) is site-specifically incorporated in the pore of a neuronal protein Kir2.1, an inwardly rectifying potassium channel. The bulky Cmn physically blocks the channel pore, rendering Kir2.1 non-conducting. Light illumination instantaneously converts Cmn into a smaller natural amino acid Cys, activating Kir2.1 channel function. We express these photo-inducible inwardly rectifying potassium (PIRK) channels in rat hippocampal primary neurons, and demonstrate that light-activation of PIRK ceases the neuronal firing due to the outflux of K+ current through the activated Kir2.1 channels. Using in utero electroporation, we also express PIRK in the embryonic mouse neocortex in vivo, showing the light-activation of PIRK in neocortical neurons. Genetically encoding Uaa imposes no restrictions on target protein type or cellular location, and a family of photoreactive Uaas is available for modulating different natural amino acid residues. This technique thus has the potential to be generally applied to many neuronal proteins to achieve optical regulation of different processes in brains. The current protocol presents an accessible procedure for intricate Uaa incorporation in neurons in vitro and in vivo to achieve photo control of neuronal protein activity on the molecular level.

Here, a procedure to selectively activate a neuronal protein with a short pulse of light by genetically encoding a photo-reactive unnatural amino acid into a target neuronal protein expressed in neurons in culture or in vivo is presented.

Photostimulation is a noninvasive way to control biological events with excellent spatial and temporal resolution. New methods are desired to ...

Neuropharmacological Manipulation of Restrained and Free-flying Honey Bees, Apis mellifera

Honey bees demonstrate astonishing learning abilities and advanced social behavior and communication. In addition, their brain is small, easy to visualize and to study. Therefore, bees have long been a favored model amongst neurobiologists and neuroethologists for studying the neural basis of social and natural behavior. It is important, however, that the experimental techniques used to study bees do not interfere with the behaviors being studied. Because of this, it has been necessary to develop a range of techniques for pharmacological manipulation of honey bees. In this paper we demonstrate methods for treating restrained or free-flying honey bees with a wide range of pharmacological agents. These include both noninvasive methods such as oral and topical treatments, as well as more invasive methods that allow for precise drug delivery in either systemic or localized fashion. Finally, we discuss the advantages and disadvantages of each method and&#160;describe common hurdles and how to best overcome them. We conclude with a discussion on the importance of adapting the experimental method to the biological questions rather than the other way around.

Neuropharmacological Manipulation of Restrained and Free-flying Honey Bees, Apis mellifera

This manuscript describes several protocols for administering pharmacological agents to honey bees, including simple noninvasive methods for free-flying bees, as well as more invasive variants that allow precise localized treatment of restrained bees.

Honey bees demonstrate astonishing learning abilities and advanced social behavior and communication. In addition, their brain is small, easy to visualize ...

Recording EEG in Freely Moving Neonatal Rats Using a Novel Method

EEG is a useful method to detect electrical activity in the brain. Moreover, it is a widely used diagnostic tool for various neurological conditions, such as epilepsy and neurodegenerative disorders. However, it is technically difficult to obtain EEG recordings in neonates as it requires specialized handling and great care. Here, we present a novel method to record EEG in neonatal rat pups (P8-P15). We designed a simple and reliable electrode using computer pin loci; it can be easily implanted into the skull of a rat pup to record high-quality EEG signals in the normal and epileptic brain. Pups were given an intraperitoneal (i.p.) injection of the neurotoxin kainic acid (KA) to induce epileptic seizures. The surgical implantation performed in this procedure is less expensive than other EEG procedures for neonates. This method allows one to record high-quality and stable EEG signals for more than 1 week. Furthermore, this procedure can also be applied to adult rats and mice to study epilepsy or other neurological disorders.

Here, we introduce a novel technique designed to record electroencephalography (EEG) in freely moving neonatal epileptic pups and describe its procedures, features, and applications. This method allows one to record EEG for more than 1 week.

EEG is a useful method to detect electrical activity in the brain. Moreover, it is a widely used diagnostic tool for various neurological conditions, such ...

Simultaneous Recordings of Cortical Local Field Potentials, Electrocardiogram, Electromyogram, and Breathing Rhythm from a Freely Moving Rat

Monitoring the physiological dynamics of the brain and peripheral tissues is necessary for addressing a number of questions about how the brain controls body functions and internal organ rhythms when animals are exposed to emotional challenges and changes in their living environments. In general experiments, signals from different organs, such as the brain and the heart, are recorded by independent recording systems that require multiple recording devices and different procedures for processing the data files. This study describes a new method that can simultaneously monitor electrical biosignals, including tens of local field potentials in multiple brain regions, electrocardiograms that represent the cardiac rhythm, electromyograms that represent awake/sleep-related muscle contraction, and breathing signals, in a freely moving rat. The recording configuration of this method is based on a conventional micro-drive array for cortical local field potential recordings in which tens of electrodes are accommodated, and the signals obtained from these electrodes are integrated into a single electrical board mounted on the animal's head. Here, this recording system was improved so that signals from the peripheral organs are also transferred to an electrical interface board. In a single surgery, electrodes are first separately implanted into the appropriate body parts and the target brain areas. The open ends of all of these electrodes are then soldered to individual channels of the electrical board above the animal's head so that all of the signals can be integrated into the single electrical board. Connecting this board to a recording device allows for the collection of all of the signals into a single device, which reduces experimental costs and simplifies data processing, because all data can be handled in the same data file. This technique will aid the understanding of the neurophysiological correlates of the associations between central and peripheral organs.

This study introduces a method for the simultaneous recording of local field potentials in the brain, electrocardiograms, electromyograms, and breathing signals of a freely moving rat. This technique, which reduces experimental costs and simplifies data analysis, will contribute to the understanding of the interactions between the brain and peripheral organs.

Monitoring the physiological dynamics of the brain and peripheral tissues is necessary for addressing a number of questions about how the brain controls ...

Noninvasive EEG Recordings from Freely Moving Piglets

The method allows the recording of high-quality electroencephalograms (EEGs) from freely moving piglets directly in the pigpen. We use a one-channel telemetric electroencephalography system in combination with standard self-adhesive hydrogel electrodes. The piglets are calmed down without the use of sedatives. After their release into the pigpen, the piglets behave normally&#8212;they drink and sleep in the same cycle as their siblings. Their sleep phases are used for the EEG recordings.

Here, we present a protocol to record telemetric electroencephalograms (EEGs) from freely moving piglets directly in the pigpen without the use of a sedative, making it possible to record typical EEG patterns during non-REM sleep, like spindle bursts.

The method allows the recording of high-quality electroencephalograms (EEGs) from freely moving piglets directly in the pigpen. We use a one-channel ...

Long-term Sensory Conflict in Freely Behaving Mice

Long-term sensory conflict protocols are a valuable means of studying motor learning. The presented protocol produces a persistent sensory conflict for experiments aimed at studying long-term learning in mice. By permanently wearing a device fixed on their heads, mice are continuously exposed to a sensory mismatch between visual and vestibular inputs while freely moving in home cages. Therefore, this protocol readily enables the study of the visual system and multisensory interactions over an extended timeframe that would not be accessible otherwise. In addition to lowering the experimental costs of long-term sensory learning in naturally behaving mice, this approach accommodates the combination of in vivo and in vitro experiments. In the reported example, video-oculography is performed to quantify the vestibulo-ocular reflex (VOR) and optokinetic reflex (OKR) before and after learning. Mice exposed to this long-term sensory conflict between visual and vestibular inputs presented a strong VOR gain decrease but exhibited few OKR changes. Detailed steps of device assembly, animal care, and reflex measurements are hereby reported.

The presented protocol produces a persistent sensory conflict for experiments aimed at studying long-term learning. By permanently wearing a fixed device on their heads, mice are continuously exposed to a sensory mismatch between visual and vestibular inputs while freely moving in home cages.

Long-term sensory conflict protocols are a valuable means of studying motor learning. The presented protocol produces a persistent sensory conflict for ...

Hybrid Microdrive System with Recoverable Opto-Silicon Probe and Tetrode for Dual-Site High Density Recording in Freely Moving Mice

Multi-regional neural recordings can provide crucial information to understanding fine-timescale interactions between multiple brain regions. However, conventional microdrive designs often only allow use of one type of electrode to record from single or multiple regions, limiting the yield of single-unit or depth profile recordings. It also often limits the ability to combine electrode recordings with optogenetic tools to target pathway and/or cell type specific activity. Presented here is a hybrid microdrive array for freely moving mice to optimize yield and a description of its fabrication and reuse of the microdrive array. The current design employs nine tetrodes and one opto-silicon probe implanted in two different brain areas simultaneously in freely moving mice. The tetrodes and the opto-silicon probe are independently adjustable along the dorsoventral axis in the brain to maximize the yield of unit and oscillatory activities. This microdrive array also incorporates a set-up for light, mediating optogenetic manipulation to investigate the regional- or cell type-specific responses and functions of long-range neural circuits. In addition, the opto-silicon probe can be safely recovered and reused after each experiment. Because the microdrive array consists of 3D-printed parts, the design of microdrives can be easily modified to accommodate various settings. First described is the design of the microdrive array and how to attach the optical fiber to a silicon probe for optogenetics experiments, followed by fabrication of the tetrode bundle and implantation of the array into a mouse brain. The recording of local field potentials and unit spiking combined with optogenetic stimulation also demonstrate feasibility of the microdrive array system in freely moving mice.

This protocol describes the construction of a hybrid microdrive array that allows implantation of nine independently adjustable tetrodes and one adjustable opto-silicon probe in two brain regions in freely moving mice. Also demonstrated is a method for safely recovering and reusing the opto-silicon probe for multiple purposes.

Multi-regional neural recordings can provide crucial information to understanding fine-timescale interactions between multiple brain regions. However, ...

Wireless Electrophysiological Recording of Neurons by Movable Tetrodes in Freely Swimming Fish

The neural mechanisms governing fish behavior remain mostly unknown, although fish constitute the majority of all vertebrates. The ability to record brain activity from freely moving fish would advance research on the neural basis of fish behavior considerably. Moreover, precise control of the recording location in the brain is critical to studying coordinated neural activity across regions in fish brain. Here, we present a technique that records wirelessly from the brain of freely swimming fish while controlling for the depth of the recording location. The system is based on a neural logger associated with a novel water-compatible implant that can adjust the recording location by microdrive-controlled tetrodes. The capabilities of the system are illustrated through recordings from the telencephalon of goldfish.

A novel wireless technique for recording extracellular neural signals from the brain of freely swimming goldfish is presented. The recording device is composed of two tetrodes, a microdrive, a neural data logger, and a waterproof case. All parts are custom-made except for the data logger and its connector.

The neural mechanisms governing fish behavior remain mostly unknown, although fish constitute the majority of all vertebrates. The ability to record brain ...