A Protocol for Lentiviral Transduction and Downstream Analysis of Intestinal Organoids

Podsumowanie

In this video protocol we give a step by step explanation of lentiviral transduction in organoids of primary intestinal epithelium and of processing and downstream analysis of these cultures by quantitative RT-PCR, RNA-microarray and immunohistochemistry.

Streszczenie

Intestinal crypt-villus structures termed organoids, can be kept in sustained culture three dimensionally when supplemented with the appropriate growth factors. Since organoids are highly similar to the original tissue in terms of homeostatic stem cell differentiation, cell polarity and presence of all terminally differentiated cell types known to the adult intestinal epithelium, they serve as an essential resource in experimental research on the epithelium. The possibility to express transgenes or interfering RNA using lentiviral or retroviral vectors in organoids has increased opportunities for functional analysis of the intestinal epithelium and intestinal stem cells, surpassing traditional mouse transgenics in speed and cost. In the current video protocol we show how to utilize transduction of small intestinal organoids with lentiviral vectors illustrated by use of doxycylin inducible transgenes, or IPTG inducible short hairpin RNA for overexpression or gene knockdown. Furthermore, considering organoid culture yields minute cell counts that may even be reduced by experimental treatment, we explain how to process organoids for downstream analysis aimed at quantitative RT-PCR, RNA-microarray and immunohistochemistry. Techniques that enable transgene expression and gene knock down in intestinal organoids contribute to the research potential that these intestinal epithelial structures hold, establishing organoid culture as a new standard in cell culture.

Wprowadzenie

The intestinal epithelium is one of the most rapidly proliferating bodily tissues, which has caused it to attract wide interest from research on cancer and stem cells. In 2009 a technique was published to generate long lasting cultures of small intestinal crypts in matrigel, conserving a 3 dimensional structure¹. These structures, termed intestinal organoids, can be cultured using standard techniques, with surrounding medium supplemented with a number of defined growth factors, including the Bmp-signaling pathway inhibitor noggin (Nog), the Wnt-signaling pathway enhancer rspondin 1 (Rspo1) and epidermal growth factor (Egf) all found to enhance intestinal proliferation^2-4.

Organoids surpass traditional cancer cell lines in the aspects that they are non-mutated, have maintained stem cell hierarchy, display intact cellular polarization and exhibit differentiation into all cell lineages found in the nascent small intestinal epithelium. Since they can be transduced to carry transgenes or RNA interference constructs⁵, they are used to study specific genetic elements, outweighing experiments using transgenic mice in facets of cost and speed. Transgenic expression in organoids can be performed using either murine retroviral or lentiviral vectors^6,7. Due to the limitations of murine retroviruses, capable of transducing mitotic cells exclusively⁸, lentiviral transduction is more frequently used for cells that are difficult to infect, such as organoids.

Virally transduced and stably expressing transgenic organoids can be used for a multitude of downstream analyses, including quantitative RNA analyses and immunohistochemistry. Taken together, culture of organoids from primary intestinal epithelial cells has evolved into a routine technique that is easy to implement without specific laboratory requirements, and has become the novel standard in cell culture in research on the intestinal epithelium.

Techniques of viral transduction and subsequent downstream analysis in organoids are tedious to perform and to aid organoid experiments we generated this video protocol, showing methods for lentiviral transduction of cultured organoids. We additionally show how correct processing of organoids can increase yield and therefore enhance performance of downstream analysis using RNA techniques or immunohistochemistry. In the protocol, organoids that are derived from small intestinal crypts were exclusively used, although the techniques described may be applied to colonic organoids as well.

Protokół

1. Preparation of Polyethylenimine (PEI) as Transfection Reagent

1. Dissolve approximately 150 mg of PEI into 100 ml of H₂O.
2. Adjust solution to pH 7.4 by adding HCl until solution becomes clear and stir until completely dissolved. This may take between 10 and 60 min and add water to an end concentration of 1 mg/ml.
3. When clear, filter the PEI solution through sterile 0.22 µm filter and store in a -80 °C freezer in aliquots of 5 ml.

2. Production of Lentiviral Particles

Day 1:

1. Split HEK293T cells to 60%-80% confluency in 162 cm² flask or large petri dish in cell line culture medium (DMEM supplemented with 10% FCS, 1% penicillin/streptomycin and 2 mM glutamine supplement).

Day 2:

2. Prepare DNA transfection solution containing 45 µg of total plasmid DNA by adding together lentiviral packaging vectors (7 µg of pVSVg; 5 µg of pRSV rev; 13 µg of pMDL) and 20 µg of lentiviral plasmid encoding the gene of interest or shRNA of interest. Adjust to a volume of 1 ml using DMEM.
3. Prepare PEI transfection solution by adding 90 µl of 1 mg/ml PEI to 930 µl of DMEM and incubate for 5 min at room temperature.
4. Add DNA transfection solution to PEI solution. Vortex or invert a number of times and incubate for 5 min at room temperature to obtain DNA transfection solution.
5. Drip 2 ml of the DNA transfection solution onto the HEK293T cells and incubate for 4 hr in a humidified cell culture incubator on 37 °C.
6. After 4 hr, refresh the culture medium to remove PEI. It is not necessary to wash cells before adding new medium.
   NOTE: PEI is cytotoxic and incubation times longer than 4 hr may cause harm to the HEK293T cells.

Day 4:

7. Replace supernatant with new culture medium. Keep supernatant (containing virus); this will be used in step 2.10.
8. Put supernatant in 15 ml flask. To remove dead cells, centrifuge for 5 min at 500 x g.
9. Push supernatant through 0.45 µm filter using a large 60 ml syringe. Store overnight at 4 °C.

Day 5:

10. Collect the second batch of supernatant; centrifuge and filter as in steps 2.8-2.9.
11. Pool the supernatants from steps 2.9 and 2.10 in ultracentrifuge tubes and centrifuge at 50,000 x g in an ultracentrifuge for 90 min.
12. Take out capsules containing the ultracentrifuge tubes very carefully and put into a laminar flow hood, remembering the orientation of the tube inside the centrifuge.
13. Open capsule holding ultracentrifuge tube and decant medium carefully in such a fashion that the pellet is on the upper side of the tube. Since viral pellets may be difficult to visualize, remember on what side of the tube a pellet will have formed. Take a micropipette and remove last bit of medium while taking care not to agitate the opaque brown pellet that is visible on the side of the bottom of the ultracentrifuge tube.
14. Resuspend this pellet in 500 µl of organoid culture medium supplemented with 10 mM nicotinamide, 10 µM Chir99021, 10 µM Y27632 and 8 µg/ml polybrene. Resuspension in this medium is important since high titer virus is used to transduct organoids directly.
15. Optionally: freeze the virus in this medium aliquoted in two batches of 250 µl in -80 °C.

3. Lentiviral Transduction of Organoids

Day 0:

1. Split a full 0.95 cm² well of organoids two days prior to transduction into a new well, aiming to obtain approximately 50 small organoids. Split organoids according to previously published protocol¹ (Figure 3A, B).
2. Supplement organoid culture medium with 10 µM Chir99021 and 10 mM nicotinamide to obtain cystic hyper proliferative crypts (Figure 3C).
   NOTE: Cystic crypts will develop best when freshly split organoids are grown in the presence of Chir99021.

Day 2:

3. Harvest organoids by pipetting up and down the matrigel and medium, thereby disrupting the mixture with a p1000 micropipette. Place the mixture in a 15 ml tube.
4. Disrupt further using Pasteur pipet in which the distal opening has been decreased by melting. Centrifuge organoids to pellet for 5 min at 100 x g.
   NOTE: Dependent on the size of the centrifuge, use a different centrifuge speed. It is necessary to find the exact speed in which disrupted organoids are separated from the mixture.
5. Remove the supernatant and add 500 µl of pre-warmed 1x trypsin (similar to 0.25% trypsin). Resuspend organoids in trypsin and incubate 3 min in a 37 °C water bath.
6. Inactivate trypsin by adding 3.5 ml of cell line culture medium (DMEM supplemented with 10% FCS, 1% penicillin/streptomycin and glutamine). Centrifuge for 5 min at 500 x g.
7. Remove the supernatant to leave pellet in approximately 20 µl of medium. Transfer the organoids in this last small amount of medium into a well on a 48-wells plate.
8. Add high titer lentivirus in transduction medium as described in step 2.14, resuspend and continue to step 3.10. When encountering low transduction efficacy, step 3.9 may be added.
   NOTE: For efficient transduction, typically add one aliquot of 250 µl of high titer lentivirus to one well of organoids. This represents 50% of all harvested lentivirus from a single production as described in step 2 of this protocol.
9. Optionally: to enhance transduction efficacy, perform spinoculation by putting the 48 well plate containing organoids in a pre-warmed centrifuge on 32 °C and rotate at 600 x g for 1 hr.
10. Put organoid-virus mixture in culture incubator and incubate for 1 hr at 37 °C in a culture incubator to allow transduction.
11. Optionally: to further enhance transduction efficacy, incubate organoids for additional 3 hr at 37 °C in a culture incubator.
12. Add 1 ml of organoid culture medium and resuspend the organoid-virus mixture, transfer into a microcentrifuge tube and centrifuge in a microcentrifuge for 5 min at 850 x g to pellet organoids.
13. Remove the supernatant and resuspend the pellet in 20 µl of ice-cold matrigel. Since the material solidifies when it becomes warmer, use pipette tips that are chilled by pipetting up and down ice cold PBS for a number of times.
14. Put the droplet in the middle of a well in a 48 wells plate and incubate in culture incubator at 37 °C for 15 min to solidify.
15. After 15 min, carefully add 250 µl of organoid culture medium supplemented with 10 mM nicotinamide, 10 µM Chir99021 and 10 µM Y27632. Small disrupted organoid fragments will form into small cystic organoids within 24 hr.

Day 5:

16. Refresh medium and supplement with a selection antibiotic (for puromycin, use 4 µg/ml).

Day 7:

17. Replace medium for standard organoid culture medium, supplemented with selection antibiotic.
    NOTE: Budding will be complete 2-3 weeks after Chir99021 withdrawal. After selection, organoids may be grown without selection antibiotic.

4. Organoid RNA Preparation for Quantitative RT-PCR or Microarray

1. For RNA preparation, use a commercial kit according to manufacturer’s protocol. Remove the medium from organoids and add 350 µl of buffer RLT, supplemented with β-mercaptoethanol straight on the dome of matrigel containing organoids. Resuspend the material in RLT by pipetting using p1000 micropipette.
2. Perform further RNA prep according to manufacturer’s protocol.
3. Optionally: increase RNA yield by amplification using Ovation Pico WTA system, requiring initial input of 50 µg total RNA according to manufacturer’s protocol.
4. Optionally: for quality control prior to RNA microarray, run samples on a 2100 bioanalyzer using an eukaryote total RNA nano chip, aiming for an RNA integrity number (RIN) of 8.5 or more (Figure 5) according to manufacturer’s protocol.

5. Processing Organoids for Paraffin Embedding and Immunohistochemistry

1. Prior to initiation of organoid embedding pre-warm an aluminum block with holes fitting 12 mm diameter glass tubes in incubator at 70 °C to keep paraffin liquid.
2. Take a single well with full-grown organoids and remove the medium, leaving the embedded organoids intact.
3. Add 1 ml of 4% paraformaldehyde in PBS straight to well and fix at 4 °C anywhere from 1 hr to overnight.
4. Replace paraformaldehyde with 1 ml of ice cold PBS.
   Optionally: keep fixed organoids in PBS up to 1 week at 4 °C after this step.
5. Resuspend fixed organoids in 1 ml of PBS and place into glass vial.
6. Let organoids sink to bottom for 1 min, decant PBS and replace with 70% ethanol in which a couple of droplets of eosin solution are dissolved to enable visualization of organoids throughout the embedding process.
7. Leave organoids in 70% ethanol at room temperature. After 30 min, remove 70% ethanol by carefully decanting, being able to visualize the organoids by eye because of slight pinkish eosin color. Replace embedding solution with 96% ethanol.
8. Repeat step 5.7, each time replacing the embedding solution with the next one. Pass organoids through the following solutions subsequently: 70% ethanol, 90% ethanol, 96% ethanol, 100% ethanol, 100% ethanol, xylene, xylene.
9. Decant the last xylene wash and pour paraffin into the tube. Put the tube immediately in the pre warmed aluminum block at 70 °C for 30 min and replace paraffin with new clean paraffin.
10. Pour paraffin off and pipet organoids into the paraffin block mold using a pre-warmed Pasteur pipet with large opening. Keep Pasteur pipet warm using a Bunsen burner. Place all organoids in the paraffin block mold in a small layer of liquid paraffin.
11. As much as possible, try to manipulate all organoids towards the center of the paraffin block mold using a warmed dissection needle. Keep dissection needle warm using Bunsen burner.
12. When localization of organoids in the mold is satisfactory, chill mold slightly to solidify the paraffin layer.
13. Finish the block by pouring more paraffin on top and add a standard histological embedding cassette.

Wyniki

Organoid lentiviral transduction

The technique of organoid transduction using lentiviral particles depends on correct handling of organoids prior and during transduction. Organoids (Figure 3A) were cultured and they were disrupted into single crypts (Figure 3B). As previously reported, these single crypts, when cultured in the presence of the GSK3 inhibitor Chir99021 became cystic crypts⁹ (Figure 3C). Subsequently organoids...

Dyskusje

The current video protocol describes lentiviral transduction of organoids from primary intestinal epithelium and downstream analysis of these organoids using quantitative RNA techniques and immunohistochemistry.

Lentiviral transduction is often performed in adherent or floating cells in culture plates. Since the three-dimensional structure of organoids renders them difficult to penetrate by viral particles, a number of methods to increase efficacy are used. Pretreatment of organoids using Chir...

Materiały

Name	Company	Catalog Number	Comments
Polyethylene imine	Polysciences	23966-2
DMEM medium	Lonza	BE12-614F
Fetal calf serum	Lonza	DE14-801F
Penicillin-streptomycin	Invitrogen	15140-122
Glutamin	Invitrogen	25030-024
matrigel	BD	BD 356231
Advanced DMEM-F12	Gibco	12634-010
N2	Invitrogen	17502-048
B27	Invitrogen	17504-044
N-acetyl cysteine	Sigma	A9165-1G
mouse Egf	Invitrogen	PMG8045
Hepes 1 M	Invitrogen	15630-056
glutamax 100x	Invitrogen	35050-038
Chir 99021	Axon	1386
Y27632	Sigma	Y0503-5MG
polybrene	Sigma	107689
nicotinamide	Sigma	N0636
Trypsin	Lonza	BE02-007E
puromycin	Sigma	P 7255
Rneasy mini kit	Qiagen	74106
β-mercaptoethanol	Merck	8,057,400,250
Ovation Pico WTA system	NuGen	3300-12
paraformaldehyde	Sigma	252549-1L
glass vial conical 12 mm x 75 mm 5 ml	VWR	LSUKM12
Eosin Yellowish	VWR	1,159,350,025