miRNA Expression Analyses in Prostate Cancer Clinical Tissues

Podsumowanie

Here we describe a simplified protocol for microRNA (miRNA) expression analyses in archived Formalin-Fixed, Paraffin-Embedded (FFPE) or fresh frozen prostate cancer (PCa) clinical tissues employing quantitative real-time PCR (RT-PCR) and in situ hybridization (ISH).

Streszczenie

A critical challenge in prostate cancer (PCa) clinical management is posed by the inadequacy of currently used biomarkers for disease screening, diagnosis, prognosis and treatment. In recent years, microRNAs (miRNAs) have emerged as promising alternate biomarkers for prostate cancer diagnosis and prognosis. However, the development of miRNAs as effective biomarkers for prostate cancer heavily relies on their accurate detection in clinical tissues. miRNA analyses in prostate cancer clinical specimens is often challenging owing to tumor heterogeneity, sampling errors, stromal contamination etc. The goal of this article is to describe a simplified workflow for miRNA analyses in archived FFPE or fresh frozen prostate cancer clinical specimens using a combination of quantitative real-time PCR (RT-PCR) and in situ hybridization (ISH). Within this workflow, we optimize the existing methodologies for miRNA extraction from FFPE and frozen prostate tissues and expression analyses by Taqman-probe based miRNA RT-PCR. In addition, we describe an optimized method for ISH analyses formiRNA detection in prostate tissues using locked nucleic acid (LNA)- based probes. Our optimized miRNA ISH protocol can be applied to prostate cancer tissue slides or prostate cancer tissue microarrays (TMA).

Wprowadzenie

Cancer of the prostate gland is a commonly diagnosed male malignancy that is one of the leading causes of cancer related mortality among men. In US, an estimated 220,800 new cases and 27,540 deaths will be reported in 2015¹.

Prostate cancer is a heterogeneous disease with highly variable disease course- tumors can be indolent or very aggressive. A critical challenge in prostate cancer clinical management is posed by the inadequacy of currently used methods/biomarkers for disease screening, diagnosis, prognosis and treatment². Current screening methods include prostate specific antigen (PSA) testing and a digital rectal examination (DRE) followed by prostate biopsies³. Prostate specific antigen (PSA) is the most widely used prostate cancer biomarker that has significantly revolutionized clinical management and improved survival rates⁴. However, due to inherent limitations of PSA including lack of specificity, PSA-based screening has led to over diagnosis and over treatment of the disease. In view of this, intensive efforts are being directed towards a search for alternate prostate cancer biomarkers, particularly those which can predict the aggressiveness of the disease and drive better treatment decisions^4,5. Over the last few years, microRNAs (miRNAs) have emerged as promising alternate prostate cancer biomarkers.

MicroRNAs (miRNAs) constitute an evolutionarily conserved class of small non-coding RNAs that suppress gene expression post-transcriptionally via sequence-specific interactions with the 3’- untranslated regions (UTRs) of cognate mRNA targets. It is estimated that >60% of mRNAs are conserved targets of miRNAs⁶. miRNA genes are located in intergenic regions or within introns or exons of protein/non-protein coding genes⁷. These genes are preferentially transcribed by RNA Polymerase II into primary miRNAs (pri-miRNAs, several kilobases long) that form hairpin shaped stem loop secondary structures. These pri-miRNAs are processed into precursor miRNAs (pre-miRNAs, 60-75 nucleotide long) that are exported to the cytoplasm and further processed into mature miRNAs (18-25 nucleotide long)^8-10. miRNAs regulate key cellular processes including proliferation, development, differentiation and apoptosis¹¹. Studies suggest a widespread dysregulation of miRNA expression profiles in various human malignancies including prostate cancer^12-15. miRNA expression profiles have been reported to be widely dysregulated in primary and metastatic prostate cancer. Altered miRNA expression have been linked with prostate cancer progression, aggressiveness and recurrence highlighting the prognostic potential of miRNAs^12,14,16-19. A growing body of evidence indicates that miRNAs play important mechanistic roles in prostate cancer initiation, development, progression and metastasis. Overall, miRNAs are emerging as promising alternate biomarkers for prostate cancer diagnosis and prognosis that can distinguish between normal and cancer tissues and aid in stratification of prostate tumors¹². Also, miRNAs are important targets for development of effective therapeutics against prostate cancer²⁰.

Owing to their small size and resistance to endogenous RNase activity, miRNAs are stable biomarkers that can be readily detected in formalin-fixed tissues²¹ and in prostate biopsies²². Moreover, the expression profiles of miRNAs have been compared in frozen and formalin fixed tissues and have been found to be strongly correlated²¹. However, miRNA expression profiling in prostate cancer clinical tissues is often challenging owing to tumor heterogeneity, sampling errors, stromal contamination etc. The development of miRNAs as effective biomarkers for prostate cancer heavily relies on their accurate detection in clinical tissues. Here we describe a simplified workflow used in our lab for miRNA expression profiling in archived FFPE or fresh frozen prostate cancer clinical specimens. We employ a combination of quantitative real-time PCR and in situ hybridization for miRNA analyses of clinical specimens, with the former yielding more quantitative information and the latter for visualizing the differential expression of potential miRNA biomarkers in an array of tissues. Within this workflow, we optimize the existing methodologies for miRNA extraction from FFPE and frozen prostate tissues, expression analyses by Taqman-probe based miRNA RT-PCR and miRNA in situ hybridization technique using locked nucleic acid (LNA)-based probes²³. LNA-based probes offer increased sensitivity and specificity compared to DNA- or RNA- based probes and enables robust detection of all miRNA sequences, regardless of their GC content and also allow discrimination of miRNA families. Our optimized miRNA ISH protocol can be applied to prostate cancer tissue slides or prostate cancer tissue microarrays (TMA), with the latter offering the potential to accelerate miRNA biomarker discovery.

Access restricted. Please log in or start a trial to view this content.

Protokół

Formalin-fixed, paraffin-embedded (FFPE) or fresh frozen prostate cancer samples were obtained from the SFVAMC. Samples were from prostate cancer patients who underwent radical prostatectomy at SFVAMC. Written informed consent was obtained from all patients and the study was approved by the UCSF Committee on Human Research. Alternatively, prostate cancer tissues microarrays were procured from commercial sources and used for miRNA analyses by ISH. Clinicopathological and follow up information for analyzed prostate cancer patients was collected.

1. Tissue Samples

1. Cut prostate cancer tissue samples into 10 µm sections using a microtome and stain with H & E following the manufacturer’s protocol.
2. Review stained slides for the identification of prostate cancer foci as well as adjacent normal glandular epithelium.
   Note: A board certified pathologist should review the H & E stained slides and mark for tumor and normal areas. Use the marked slides as guides in the subsequent sections for miRNA analyses from tumor vs normal areas.

2. miRNA Expression Analyses by Quantitative Real-time PCR

Note: This workflow involves the following steps: Laser Capture microdissection, isolation of total RNA (including miRNA and mRNA), assaying of mature miRNAs using the TaqMan MicroRNA expression assays as detailed in the following sections.

1. RNA Extraction
   1. Isolation of miRNA from Prostate Cancer FFPE Tissues
      1. Laser capture microdissection (LCM)
         Note: Perform steps 2.1.1.1.1- 2.1.1.1.4 in a chemical fume hood.
         1. Prepare tissue slides (10 µm sections) for LCM. Deparrafinize tissue sections by soaking in Xylene (2x), for 10 min each, then rehydrate the tissues by incubating the slides for 5 min each in graded ethanol (100%, 95%, 90%, 80%, 70%) followed by distilled water (5 min).
         2. Following rehydration, stain sections with hematoxylin for 30 sec followed by water.
         3. Place tissues in graded ethanol (70%, 95% 90%, 80%, 70%) (5 min each) and xylene (5 min).
         4. Dry slides in a fume hood and then place in the LCM instrument for microdissection.
         5. Perform microdissections with the LCM System in accordance with the manufacturer’s instructions²⁴. Use pathologist marked up slides as guides for the identification of prostate cancer foci as well as adjacent normal tissue. Use the laser beam at a 10-20 µm diameter pulses with a power of 70-90 mW.
         6. Capture areas of interest with infrared laser pulses onto LCM caps. Combine cells from 2-5 caps for miRNA extraction per sample. To ensure integrity of extracted RNA, immediately process captured cells for miRNA extraction.
         7. Alternatively, lyse cells in the miRNA extraction buffer (according to manufacturer’s protocol) and store lysates at -80 ºC.
      2. miRNA Extraction and Analyses from LCM Microdissected Tissues
         1. Extract total RNA from microdissected FFPE tissues using a commercial kit following the manufacturer’s instructions.
            Note: The yield of RNA from laser capture miscrodissection is typically low. Therefore, RNA is eluted into low volumes (20-30 µl) and used for expression profiling using Taqman microRNA expression assays following manufacturer’s instructions (also described in section 2.2). Optimization of input RNA for real time PCR detection of mature miRNAs suggests that 5 µl of the eluted RNA is optimal for each miRNA-specific reverse transcription reaction. As an endogenous control, RNU48/RNU24 is used. For control reactions, 2 µl of the eluted RNA is used for the reverse transcription reaction.
   2. Isolation of miRNA from Prostate Cancer Frozen Tissues
      1. Homogenize frozen resected prostate tissues by grinding the tissues in liquid nitrogen using a mortar and pestle. Transfer homogenized tissue to a microcentrifuge tube using a cooled spatula. Maintain the mortar/pestle and spatula at the same temperature by dipping in liquid nitrogen so homogenized tissue can be easily transferred.
      2. Add commercial guanidine isothiocyanate-phenol reagent (1 ml/0.1 g of tissue) to the homogenized tissue and incubate at room temperature for 5 min.
         Note: Homogenized tissues in the commercial guanidine isothiocyanate-phenol reagent can be stored at -80 ºC for several months.
      3. Add chloroform to the homogenate (0.2 ml chloroform/ml) and shake vigorously for 30 sec. Incubate samples at RT for 3-5 min followed by centrifugation at 10,000 x g for 20 min at 4 ºC.
      4. Transfer the upper aqueous phase to a fresh sterile RNase-free 1.5 ml tube.
      5. Add an equal volume of isopropyl alcohol. Mix and incubate for 10 min at RT followed by centrifugation at 12,000 x g for 20 min at 4 ºC to pellet the RNA.
      6. Aspirate the supernatant and wash the RNA pellet with 1 mL of 70% ethanol. Centrifuge at 12,000 x g for 10 min at 4 ºC.
      7. Carefully aspirate the supernatant. Dry RNA pellets at RT for 5-10 min. Dissolve RNA in 50-100 µl nuclease-free water.
      8. Perform quantification of RNA using a nanodrop spectrophotometer and determine RNA integrity with a bioanalyzer. Adjust RNA concentrations to 10 ng/µl. Use 10-50 ng RNA for miRNA- specific cDNA reaction followed by real-time PCR analyses (Section 2.2).
2. Quantitative Real-time PCR for miRNA Expression Analyses
   Note: Assay mature miRNAs using a two-step RT-PCR protocol as described below.
   1. Reverse Transcription (RT)
      1. Reverse transcribe cDNA from RNA using a miRNA reverse transcription kit in accordance with the manufacturer's instructions. Use 10-50 ng of total RNA with miRNA specific primer from the MicroRNA Assays and RT kit. Use RNU48/RNU24/RNU6B as controls. Dilute cDNA 1:5 to 1:10 (depending on the abundance of the analyzed miRNA) and use in Real-time PCR detection as described in the following step.
   2. Real-time PCR for Detection of Mature miRNA
      1. Amplify PCR products from cDNA samples using the MicroRNA assays with a Fast Universal master mix in accordance with manufacturer’s instructions. Normalize samples to RNU48/RNU24/RNU6B control. Use the comparative Ct (threshold cycle) method to calculate the relative changes in gene expression on the Fast Real Time PCR System. Analyze each sample in triplicate.

3. miRNA Expression Analyses by In Situ Hybridization (ISH)

1. Pre-Treatment of Tissues
   1. Cut 5 µm sections from FFPE prostate cancer tissue blocks using a microtome.
   2. Fix tissue sections by incubating the slides at 56 °C for 1 hr.
      Note: Slides can be stored at RT for several weeks for miRNA analyses.
   3. Deparrafinize the tissues by soaking the slides with xylene (2x), for 15 min each.
   4. Rehydrate the tissues by incubating the slides for 5 min each in graded ethanol (100% (2x), 95%, 90%, 80%, 70%) followed by distilled water (5 min).
   5. Fix the slides with 4% paraformaldehyde in PBS at room temperature for 20 min.
   6. Wash the slides with PBS (2x) at room temperature for 5 min each.
   7. Treat the slides with 10 µg/ml Proteinase K at 37 ºC for 10 min in pre-warmed proteinase K buffer (5 mM Tris-HCL pH 7.4, 1 mM EDTA, 1 mM NaCl).
   8. Following Proteinase-K treatment, rinse the slides with 0.2% glycine in PBS for 30 sec.
   9. Wash slides in PBS (1x) at room temperature for 5 min.
   10. Fix the slides with 4% Paraformaldehyde in PBS for 15 min.
   11. Rinse slides with PBS for 5 min.
2. Hybridization
   1. Pre-hybridize the slides with pre-hybridization solution for 3-4 hr at 55 ºC in a humidified chamber. Use tissue lab wipes soaked in 50% formamide/50% 5x SSC to keep the chamber humidified.
   2. Use 5’ digoxigenin labeled probes at a concentration of 20-50 nM in hybridization buffer. Dilute miRNA-specific probe (20-50 nM) and small nuclear RNA U6 control probe (20 nM), heat at 90 ºC for 4 min, place it on ice, and add to ice cold hybridization buffer (2-4 ng/µl).
   3. Remove pre-hybridization solution, add hybridization solution (probe + hybridization buffer, 100 µl per slide), incubate for 12-16 hr at probe-specific hybridization temperature (Hybridization temperature =Tm probe-21 ºC). Perform hybridizations in a humidified chamber (50% formamide/50% 5x SSC).
3. Washing Steps
   1. Wash the slides with 2x SSC for 10 min at 45 ºC.
   2. Wash the slides with 1.5x SSC for 10 min at 45 ºC.
   3. Wash the slides with 0.2x SSC (2x) at 37 ºC for 20 min each.
   4. Incubate slides with 1x blocking solution for 1-2 hr at room temperature
4. Detection
   1. Incubate the slides with 1:100 PBS diluted AP-conjugated anti-digoxigenin antibody for 1-4 hr or overnight at 4 ºC.
   2. Wash the slides with PBS (3x) at room temp for 10 min each.
   3. Wash the slides (2x) with Alkaline Phosphatase buffer (100 mM Tris pH 9.5, 50 mM MgCl₂, 100 mM NaCl, 0.1% Tween-20) at RT for 5 min each.
   4. Incubate the slides in BM Purple AP substrate in the dark at RT for 1-20 hr.
   5. Rinse the slides with PBS containing 0.1% Tween-20 and wash (2x) in water.
   6. Mount the slides using an aqueous mounting media and examine under a microscope.

Access restricted. Please log in or start a trial to view this content.

Wyniki

Expression profiling of miR-203 in LCM primary prostate cancer clinical specimens by RT-PCR analyses (Figure 1)

RT-PCR analyses of relative miR-203 expression in LCM primary prostate cancer tissues and the matched adjacent normal regions was carried out as described in Saini et al.¹⁵ RNU48 was used as a control. The Table below summarizes the relative miR-203 expression in prostate cancer tumor tissues relative to adjacent normal tissues.

Access restricted. Please log in or start a trial to view this content.

Dyskusje

In this article, we describe a simplified workflow for miRNA expression profiling in archived FFPE or fresh frozen prostate cancer clinical tissues. In prostate cancer, several studies suggest an important role of microRNAs in prostate cancer initiation, progression and metastasis. However, conflicting results are often obtained on a specific miRNA²² since the miRNA extraction and analyses methods differ widely. In view of the emerging evidence supporting the potential application of miRNAs as alternative pros...

Access restricted. Please log in or start a trial to view this content.

Materiały

Name	Company	Catalog Number	Comments
Microtome	Leica Biosystems	RM2255
Arcturus Autopix for LCM	Arcturus/ Life Technologies	LCM1621/LCM1110	Alternatively, Arcutus Xt system from Life Technolgies can be used.
CapSure Macro LCM Caps	Life Technologies	LCM0211
miRNeasy FFPE Kit	Qiagen	217504
7500 Fast Real-time PCR System	Applied Biosystems/ Life Technologies	4351106
Taqman MicroRNA Reverse Transcription kit	Applied Biosystems/ Life Technologies	4366596
Taqman Fast Universal PCR master mix	Applied Biosystems/ Life Technologies	4352042
DIG labeled LNA probe for U6	Exiqon	99002-01
BM Purple AP substrate	Roche	11442074001
Pre-hybridization solution	Biochain	K2191050-1
Hybridization solution	Biochain	K2191050-2
Blocking solution	Biochain	K2191050-8
AP-conjugated anti-digoxigenin antibody	Biochain	K2191050-7
Aqueous mounting media	Vector Laboratories	H-5501
Trizol (guanidine isothiocyanate-phenol reagent)	Life Technologies	15596-018
Harris hematoxylin	Statlab	SL200
Eosin	Statlab	SL201