To perform the grip strength test in the previously developed distal MCAO model, grasp the posterior section of a mouse tail and gradually lower the mouse until it holds the horizontal bar with both forepaws. Keeping the body horizontal, pull the mouse backward at a constant speed of two centimeters per second. When the mouse releases its forepaws from the bar, record the peak force in grams.
For the pole test, place the mouse vertically on the top of a wooden pole. Record the time taken by the mouse to turn around and the total time to climb down the pole with a 60-second cutoff time. To conduct the adhesive test, attach a patch of adhesive tape to the right forepaw of the mouse.
Put the mouse back into the rearing cage and record the time taken by the mouse to remove the adhesive with a 60-second cutoff time. To conduct a cylinder test, wipe an open top clear glass cylinder with 75%ethanol, and place the mouse in it. Using a camera, record its spontaneous standing exploratory behavior for three minutes.
The distal MCAO mice showed a significant reduction in grip strength and contralateral forepaw usage rate as compared to the sham operated group. Further, the occluded mice showed a significant increase in the descent time in the pole test, and in the time taken to remove the adhesive.
