We are grateful to the other members of the lab for their technical assistance in developing the CSE damage assay, and their support and advice during the development of this assay. In addition, we are grateful to the Holy Cross Fenwick Scholar Committee for their support of Nicholas Cormier, and the Holy Cross College Honors program for their support of Alexander Yeo.

Note: For this study, lung mesenchymal stromal cells (LR-MSCs) from distal lung tissue were isolated either based on their expression of cell surface markers (CD45neg, CD31neg, Sca-1high, Epcamneg) 14,15, using explant out-growth 16, or using enzymatic digestion 17. Adherent LR-MSCs were cultured in DMEM with high glucose and no glutamine, 15% FBS, 1x antibiotic/antimycotic, and 2 mM glutamine (henceforth complete media) and incubated at 37 &#176;C, 5%CO2. LR-MSCs were passaged 3-4 times to ensure a population of cells with relatively homogenous growth characteristics for the migration assay.
1. Preparing a Confluent Monolayer
<ol>
	<li>To detach MSCs from standard 100 mm culture dishes, wash cells with 10 ml of 37 &#176;C pre-warmed PBS, aspirate the PBS and add 4 ml of trypsin (0.25%). Incubate 3-5 min in a 37 &#176;C incubator. Aspirate the cells into a conical tube, add equal volume of complete media and centrifuge at 300 g for 5 min to pellet down the cells. 
	Note: Longer incubation in trypsin can alter the cell surface receptors and potentially affect migration.</li>
	<li>Aspirate media and resuspend cells in fresh complete media. Count cells, excluding dead cells using trypan blue exclusion and plate 500,000 mesenchymal stromal cells in 4 ml of complete media on a 60 mm cell culture dish. 
	Note: Depending on the source of the cells, tests may be necessary to determine the optimal number of cells needed.</li>
	<li>Incubate cells until plates are 90% confluent for optimal cell attachment and proliferation, usually 48-72 hr for MSCs. 
	Note: 100% confluence is not recommended, since many anchorage-dependent cells experience contact inhibition, which may alter their migratory capacity. Plates with less than 80% confluence will result in unusable photos because the image analysis software will interpret gaps between cells as part of the perimeter of the scratch (see Figure 1D).</li>
	<li>After the cells have reached 90% confluence, damage the cells as appropriate for the application. To assess cell damage after exposure to soluble cigarette smoke extract (CSE), generate 100% CSE by drawing the smoke from 1 University of Kentucky research cigarette (3R4F) through 25 ml of complete media in a B&#252;chner flask over 2 min 18.</li>
	<li>Incubate the cells for 24 hr in 4 ml 1-4% CSE diluted in complete media. After incubation, wash the cells twice with 4 ml of warm sterile PBS, before replacing with 4 ml fresh complete media. 
	Note: Damaging cells with high concentrations of cigarette smoke extract (&#62;5%) may substantially reduce confluence.</li>
</ol>
2. Creating the Scratch
<ol>
	<li>In a sterile environment, remove the lid from the 60 mm plate of damaged MSCs, and lay a straight edge (for example a sterilized plastic ruler) across the top rim of the plate. Without removing the media, use a sterile 200 &#181;l pipet tip guided by the sterile straight-edge to make one to four parallel scratches across the plate approximately 5 mm apart and 50 mm long. 
	Note: A straight edge minimizes the amount of rotational adjustments needed to the plate when it is on the microscope stage. It is imperative that the scratches appear completely vertical (or horizontal) on the screen. Generating multiple scratches on a 60 mm plate does not alter the microenvironment in a way that affects cell migration (data not shown), but may be a consideration for other cell types. The use of smaller wells is not recommended since the variability of cells growing close to the edge of the well becomes more pronounced and may affect uniform generation of scratches.</li>
	<li>Aspirate the media and gently wash the plates with 2 ml of pre-warmed complete media to prevent cells from adhering to the center of the scratch, and to remove cells that have been loosened by the scratching. Replace with 4 ml of fresh complete media.</li>
	<li>Using a sterile permanent marker, label each scratch from 1-4 on the underside of the plate at location that will not interfere with imaging the scratches. 
	Note: It is important that images from the same scratch are compared before and after migration, since there can be variation in scratch width.</li>
</ol>
3. Taking Initial Images of the Scratch
Note: If the scratch assay is performed on multiple plates, it is recommended that initial images of all the scratches on a single plate are taken before scratches are made on the next plate.
<ol>
	<li>Use an inverted phase contrast microscope with a camera to generate the images needed for analysis.</li>
	<li>Position the culture plate on the microscope, and use the low power objective (10X) to locate scratch #1. If condensation on the lid of the culture plate is impeding a clear image of the cells, use a heated stage set to 37 &#176;C.</li>
	<li>Keeping the scratch completely horizontal and in the center of the field of view, obtain as many images as necessary to encompass 90% of the scratch&#39;s length. Obtain images of distinct portions of the scratch with no overlap between images. 
	Note: The refraction of light at the edges of the culture dish overexposes the images, making them impossible to analyze. Therefore, do not take images from the first and last 5% of the scratch&#39;s length.</li>
	<li>Save images from each scratch in a separate folder.</li>
	<li>Repeat steps 3.2-3.4 for scratches 2, 3, and 4.</li>
	<li>Return plates to the incubator immediately after initial imaging. Let cells migrate for 4-7 hr. 
	Note: 7 hr is optimal when assessing MSCs damaged with CSE. Incubating cells for greater than 7 hr is not recommended because cell proliferation can act as a confounding variable for cell migration (see Optional Note 8.2 below).</li>
</ol>
4. Analyzing Initial Scratch Images
<ol>
	<li>Download ImageJ and install the Wound Healing Tool plugin (refer to the Table of Materials/Equipment).</li>
	<li>Open the image file in ImageJ, then click &#34;Process&#34; and &#34;Find Edges&#34; to highlight the cells surrounding the scratch for the Wound Healing Tool to calculate the scratch area (Figure 2B). Next, click &#34;Image&#34;, &#34;Adjust&#34;, &#34;Color Threshold&#34; and in the dropdown menu labeled &#34;Threshold Color&#34; change the value to &#34;B&#38;W.&#34;</li>
	<li>Within the &#34;Color Threshold&#34; menu, adjust both brightness threshold sliders until optimal contrast between the scratch and cell front is achieved. To allow for the greatest range when trying to create contrast in the image, move the bottom slider completely to the right (completely black image), and then adjust the top slider to generate maximum contrast.</li>
	<li>Slowly adjust the top brightness slider from left to right until the image cleanly displays the contour of the scratch (Figure 2C). Once the edges of the scratch have been identified, click &#34;More Tools&#34; in the ImageJ toolbar, select &#34;MRI_Wound_Healing_Tool&#34; from the dropdown menu, and press the &#34;m&#34; button (that will appear in the ImageJ toolbar) to highlight the scratch area and output the computed area in a results pop-out window (Figure 2D).</li>
	<li>Copy and paste all numbers from the results window (Figure 2E) into an excel spreadsheet. Make sure to separate data from individual scratches.</li>
</ol>
5. Taking Final Images of the Scratch
<ol>
	<li>After the cells have migrated (4-7 hr), repeat steps 3.2-3.4. Image the plates in the same order they were scratched so that cells on each plate have had equal time to migrate. 
	Note: The cells can be imaged at multiple time points, depending on their sensitivity to both temperature and pH changes. Alternatively, live cell imaging can used to follow the cells in real time as they migrate.</li>
</ol>
6. Analyzing Final Scratch Images
<ol>
	<li>Repeat steps 4.2-4.5 for final scratch images.</li>
</ol>
7. Calculating the Scratch Area to Quantify Migration
<ol>
	<li>Compute the mean pre-migration area by averaging the initial area values of the respective scratches.</li>
	<li>Compute the total amount of migration by subtracting the final migration area for each image, calculated in step 6, from the average pre-migration area (step 7.1). Generate a list of values for each scratch representing the change in migration.</li>
	<li>Pool the data from multiple scratches within the same test group (i.e. all plates and all scratches on cells exposed to 0% CSE). Use an Analysis of Variance test to analyze the differences between experimental groups.</li>
	<li>If the cells are slow to migrate and require a longer incubation time after scratching (greater than 10-12 hr), perform a BrDU or EdU incorporation assay 19 to determine whether cells are undergoing any proliferation during the period in which the migration assay is occurring. Choose a migration assay time to avoid significant cell proliferation.</li>
</ol>
8. Optional
<ol>
	<li>To assess whether significant cell senescence is occurring as a result of the scratching procedure, perform a senescence-associated Beta-Galactosidase assay on a test plate at predetermined times after scratching 19.</li>
</ol>

<ol>
	<li>Gough, W., Hulkower, K. I., Lynch, R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+quantitative,+facile,+and+high-throughput+image-based+cell+migration+method+is+a+robust+alternative+to+the+scratch+assay.">A quantitative, facile, and high-throughput image-based cell migration method is a robust alternative to the scratch assay.</a> J. Biomol. Screen. 16 (2), 155-163 (2011).</li><li>Ridley, A. J., Schwartz, M. A., Burridge, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cell+migration:+integrating+signals+from+front+to+back.">Cell migration: integrating signals from front to back.</a> Science. 302 (5651), 1704-1709 (2013).</li><li>Sharma, R. R., Pollock, K., Hubel, A., McKenna, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mesenchymal+stem+or+stromal+cells:+a+review+of+clinical+applications+and+manufacturing+practices.">Mesenchymal stem or stromal cells: a review of clinical applications and manufacturing practices.</a> Transfusion. 54 (5), 1418-1437 (2014).</li><li>Booth-Gauthier, E. A., Du, V., Ghibaudo, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hutchinson-Gilford+progeria+syndrome+alters+nuclear+shape+and+reduces+cell+motility+in+three+dimensional+model+substrates.">Hutchinson-Gilford progeria syndrome alters nuclear shape and reduces cell motility in three dimensional model substrates.</a> Integr. Biol. (Camb). 5 (3), 569-577 (2013).</li><li>Keese, C. R., Wegener, J., Walker, S. R., Giaever, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrical+wound-healing+assay+for+cells+in+vitro.">Electrical wound-healing assay for cells in vitro.</a> Proc. Natl. Acad. Sci. U.S.A. 101 (6), 1554-1559 (2004).</li><li>Pinco, K. A., He, W., Yang, J. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Alpha4beta1+Integrin+Regulates+Lamellipodia+Protrusion+Via+a+Focal+Complex/focal+Adhesion-Independent+Mechanism.">Alpha4beta1 Integrin Regulates Lamellipodia Protrusion Via a Focal Complex/focal Adhesion-Independent Mechanism.</a> Mol. Biol. Cell. 13 (9), 3203-3217 (2002).</li><li>Fronza, M., Heinzmann, B., Hamburger, M., Laufer, S., Merfort, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Determination+of+the+wound+healing+effect+of+Calendula+extracts+using+the+scratch+assay+with+3T3+fibroblasts.">Determination of the wound healing effect of Calendula extracts using the scratch assay with 3T3 fibroblasts.</a> J. Ethnopharmacol. 126 (3), 463-467 (2009).</li><li>Justus, C. R., Leffler, N., Ruiz-Echevarria, M., Yang, L. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vitro+cell+migration+and+invasion+assays.">In vitro cell migration and invasion assays.</a> J. Vis. Exp. (88), (2014).</li><li>Walter, M. N., Wright, K. T., Fuller, H. R., MacNeil, S., Johnson, W. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mesenchymal+stem+cell-conditioned+medium+accelerates+skin+wound+healing:+an+in+vitro+study+of+fibroblast+and+keratinocyte+scratch+assays.">Mesenchymal stem cell-conditioned medium accelerates skin wound healing: an in vitro study of fibroblast and keratinocyte scratch assays.</a> Exp. Cell Res. 316 (7), 1271-1281 (2010).</li><li>Goetsch, K. P., Niesler, C. U. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optimization+of+the+scratch+assay+for+in+vitro+skeletal+muscle+wound+healing+analysis.">Optimization of the scratch assay for in vitro skeletal muscle wound healing analysis.</a> Anal. Biochem. 411 (1), 158-160 (2011).</li><li>Chung, C. A., Chen, C. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+effect+of+cell+sedimentation+on+measuring+chondrocyte+population+migration+using+a+Boyden+chamber.">The effect of cell sedimentation on measuring chondrocyte population migration using a Boyden chamber.</a> J. Theor. Biol. 261 (4), 610-625 (2009).</li><li>Fabbri, M., Bianchi, E., Fumagalli, L., Pardi, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Regulation+of+lymphocyte+traffic+by+adhesion+molecules.">Regulation of lymphocyte traffic by adhesion molecules.</a> Inflamm. Res. 48 (5), 239-246 (1999).</li><li>Saez, A., Ghibaudo, M., Buguin, A., Silberzan, P., Ladoux, B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rigidity-driven+growth+and+migration+of+epithelial+cells+on+microstructured+anisotropic+substrates.">Rigidity-driven growth and migration of epithelial cells on microstructured anisotropic substrates.</a> Proc. Natl. Acad. Sci. U.S.A. 104 (20), 8281-8286 (2007).</li><li>Paxson, J. A., Gruntman, A. M., Davis, A. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Age+Dependence+of+Lung+Mesenchymal+Stromal+Cell+Dynamics+Following+Pneumonectomy.">Age Dependence of Lung Mesenchymal Stromal Cell Dynamics Following Pneumonectomy.</a> Stem Cells Dev. 22 (24), 3214-3225 (2013).</li><li>McQualter, J. L., Brouard, N., Williams, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Endogenous+fibroblastic+progenitor+cells+in+the+adult+mouse+lung+are+highly+enriched+in+the+sca-1+positive+cell+fraction.">Endogenous fibroblastic progenitor cells in the adult mouse lung are highly enriched in the sca-1 positive cell fraction.</a> Stem Cells. 27 (3), 623-633 (2009).</li><li>Hoffman, A. M., Paxson, J. A., Mazan, M. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Lung-Derived+Mesenchymal+Stromal+Cell+Post-Transplantation+Survival,+Persistence,+Paracrine+Expression,+and+Repair+of+Elastase-Injured+Lung.">Lung-Derived Mesenchymal Stromal Cell Post-Transplantation Survival, Persistence, Paracrine Expression, and Repair of Elastase-Injured Lung.</a> Stem Cells Dev. 20 (10), 1779-1792 (2011).</li><li>Beane, O. S., Fonseca, V. C., Cooper, L. L., Koren, G., Darling, E. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Impact+of+aging+on+the+regenerative+properties+of+bone+marrow-,+muscle-,+and+adipose-derived+mesenchymal+stem/stromal+cells.">Impact of aging on the regenerative properties of bone marrow-, muscle-, and adipose-derived mesenchymal stem/stromal cells.</a> PLoS One. 9 (12), e115963 (2014).</li><li>Chen, L., Ge, Q., Tjin, G., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effects+of+cigarette+smoke+extract+on+human+airway+smooth+muscle+cells+in+COPD.">Effects of cigarette smoke extract on human airway smooth muscle cells in COPD.</a> Eur. Respir. J. 44 (3), 634-646 (2014).</li><li>Itahana, K., Campisi, J., Dimri, G. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Methods+to+detect+biomarkers+of+cellular+senescence:+the+senescence-associated+beta-galactosidase+assay.">Methods to detect biomarkers of cellular senescence: the senescence-associated beta-galactosidase assay.</a> Methods Mol. Biol. 371, 21-31 (2007).</li></ol>

The authors declare that they have no competing financial interests.

The protocol described here provides a quantitatively robust, standardized method to perform and analyze scratch assays. Simple scratch assays are routinely used in many different areas of study to examine cellular migration. However, traditionally the scratch assay has lacked a standardized set-up and quantification protocol, which has led to issues with reproducibility 7,10. Many of the modifications and optimizations for improving the scratch assay have reduced these issues, including individual live-cell i...

Cell migration is highly coordinated and vital to many physiological processes such as tissue development, repair, and regeneration, as well as pathological processes such as cancer metastasis and arteriosclerosis 1. An understanding of cell migration is particularly relevant to emerging therapies used to repair damaged tissues and treat pathological conditions, including cell transplantation technologies and artificial tissue grafting 2. Given the current interest in the role of mesenchymal stromal cells (MSCs) in mediating tissue repair 3, quantifying the migratory capacity of these cells using an assay that is rigorously quantifiable, adaptable, and cost-effective is of interest. Importantly, such an assay must be sufficiently sensitive to detect relatively subtle changes in cellular migratory capacity after damage. Current methods for quantifying cell migration, including scratch assays, trans-well migration assays (Boyden chambers), micropillar arrays, and cell exclusion zone assays possess a range of limitations in reproducibility, customizability, quantification, and cost-effectiveness 1,4,5. The optimized scratch assay described here demonstrates robust outcomes, quantifiable and image-based analysis capabilities, cost-effectiveness, and adaptability to other applications.
Scratch assays have been used in multiple capacities to assess cell migration and proliferation under different experimental conditions 5. The assay entails seeding the designated cells, growing them to complete or near confluence, and scratching the resultant monolayer with a sterile needle or pipet tip 6. Analysis is most commonly performed by comparing the width of the scratch over multiple time points at randomly selected locations 7-9. Despite its prominent use, the scratch assay is confounded by issues with reproducibility and quantification. Variability in generation of the scratch not only alters the microenvironment of the cells, but can also impede cell migration by damaging the plate surface and underlying extracellular-matrix 5. Assays are frequently conducted over 7 to 12 hr, however for cell lines displaying slower migration and longer assay times, proliferation becomes a confounding variable 7,10. Lastly, senescent cells generated by the scratching process can release factors that interfere with the extracellular signaling required to close the gap in the monolayer 1. Optimizing the scratch assay requires creation of a consistent gap that does not interfere with surface properties, minimizing assay time length, and preventing unwanted cell death during the manipulation. The stopper based assay is an optimization of a cell exclusion zone assay. This assay utilizes a stopper placed in the middle of the well that excludes cell growth, but allows cells to be plated around the central exclusion zone. To assess migration, the stopper is removed, and the resultant exclusion zone provides a surface for migration to occur. However, this assay is difficult to customize or adapt 10 and for some applications, this technique can also be cost prohibitive.
In contrast to scratch assays and their derivatives, trans-well migration assays (or Boyden chamber assays) assess migration by quantifying the number of cells that move from one chamber, through a microporous filter membrane, into a chamber containing chemotactic agents 8,11,12. This technique has limited utility for adherent cells like MSCs because following migration through the porous membrane, cells adhere to the membrane side exposed to the chemotactic agents, and can be hard to accurately quantify. While the assay is able to examine some three-dimensional migration patterns, the restricted cell types for which it is able to accurately quantify cell migration limit its utility 10. Another alternative to scratch assays uses a micro-pillar array, which measures cellular motility through a three-dimensional space using the ability of cells to deform and migrate into the array as a surrogate. Polydimethlysiloxane (PDMS) elastomers cured over a precise mold and treated with ozone and fibronectin produces a homogenous and non-degradable microenvironment. Micro-pillar spacing can also be varied as needed to gauge the ability of cells to enter the array 4. The mold is created through deep reactive ion etching of silicon wafers to create a negative version of the high aspect-ratio array 13. While the assay is strengthened by its customizability, ability to model three-dimensional migration, and analysis through direct visualization of migrating cells, difficulty in creating micro-pillar arrays economically impedes its widespread use.
The optimized scratch assay described in this protocol provides an efficient, cost-effective method for producing consistent scratches that can be analyzed using freely available software. Instead of simple width measurements made across the scratch before and after cell migration, the software enables the user to determine total scratch areas before and after migration. This advancement limits the issue of trying to determine where the scratch the width measurements should be taken, and whether the width of the scratch is uniform along it&#39;s length. In addition, careful optimization of cell numbers, cell confluence and the type and degree of damage inflicted on the cells is discussed in order to further optimize the assay.

<table border="0" cellpadding="0" cellspacing="0" width="1143">
	<tbody>
		<tr height="22">
			<td height="22" style="height:22px;width:527px;">DMEM (high glucose, no added glutamine)</td>
			<td style="width:221px;">Life Technologies</td>
			<td style="width:88px;">31053-036</td>
			<td style="width:307px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:527px;">Fetal Bovine Serum, Thermo Scientific HyClone</td>
			<td style="width:221px;">Fisher Scientific</td>
			<td style="width:88px;">SH3091002</td>
			<td style="width:307px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:527px;">Antibiotic/antimycotic, Thermo Scientific HyClone&#160;</td>
			<td style="width:221px;">Fisher Scientific</td>
			<td style="width:88px;">SV3007901</td>
			<td style="width:307px;"></td>
		</tr>
		<tr height="20">
			<td height="20" style="height:20px;width:527px;">Glutamine, 200mM, Thermo Scientific HyClone</td>
			<td style="width:221px;">Fisher Scientific</td>
			<td style="width:88px;">SH3003401</td>
			<td style="width:307px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:527px;">TypeLE cell dissociation reagent</td>
			<td style="width:221px;">Life Technologies</td>
			<td style="width:88px;">12563-01</td>
			<td style="width:307px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:527px;">Dulbecco&#39;s Phosphate Buffered Saline, Thermo Scientific HyClone&#160;</td>
			<td style="width:221px;">Fisher Scientific</td>
			<td style="width:88px;">SH3002802</td>
			<td style="width:307px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:527px;">Falcon standard 60mm tissue culture dishes</td>
			<td style="width:221px;">Fisher Scientific</td>
			<td style="width:88px;">08-772B</td>
			<td style="width:307px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:527px;">Fisherbrand Sterile 200ul pipet tips</td>
			<td style="width:221px;">Fisher Scientific</td>
			<td>02-707-502</td>
			<td style="width:307px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:527px;">Inverted light microscope with camera attachment</td>
			<td style="width:221px;">Variable</td>
			<td style="width:88px;"></td>
			<td style="width:307px;"></td>
		</tr>
		<tr height="38">
			<td height="38" style="height:39px;width:527px;">ImageJ software&#160;</td>
			<td style="width:221px;">http://imagej.nih.gov/ij/</td>
			<td style="width:88px;"></td>
			<td style="width:307px;"></td>
		</tr>
		<tr height="85">
			<td height="85" style="height:85px;width:527px;">MRI_Wound_Healting plugin</td>
			<td style="width:221px;"><a href="http://dev.mri.cnrs.fr/projects/imagej-macros/wiki/Wound_Healing_Tool">http://dev.mri.cnrs.fr/projects/imagej-macros/wiki/Wound_Healing_Tool</a></td>
			<td style="width:88px;"></td>
			<td style="width:307px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:527px;">Statistical analysis software</td>
			<td style="width:221px;">Microsoft Excel</td>
			<td style="width:88px;"></td>
			<td style="width:307px;"></td>
		</tr>
	</tbody>
</table>

optimization of the wound scratch assay to detect changes in murine mesenchymal stromal cell migration after damage by soluble cigarette smoke extract

Cell migration is vital to many physiological and pathological processes including tissue development, repair, and regeneration, cancer metastasis, and inflammatory responses. Given the current interest in the role of mesenchymal stromal cells in mediating tissue repair, we are interested in quantifying the migratory capacity of these cells, and understanding how migratory capacity may be altered after damage. Optimization of a rigorously quantitative migration assay that is both easy to customize and cost-effective to perform is key to answering questions concerning alterations in cell migration in response to various stimuli. Current methods for quantifying cell migration, including scratch assays, trans-well migration assays (Boyden chambers), micropillar arrays, and cell exclusion zone assays, possess a range of limitations in reproducibility, customizability, quantification, and cost-effectiveness. Despite its prominent use, the scratch assay is confounded by issues with reproducibility related to damage of the cell microenvironment, impediments to cell migration, influence of neighboring senescent cells, and cell proliferation, as well as lack of rigorous quantification. The optimized scratch assay described here demonstrates robust outcomes, quantifiable and image-based analysis capabilities, cost-effectiveness, and adaptability to other applications.

The scratch assays presented here were performed using murine lung resident mesenchymal stromal cells (LR-MSCs) and isolated as referenced in the protocol notes. The LR-MSCs were seeded at a density of 500,000 cells in a 60 mm tissue culture dish, and grown to 90% confluence in 48 hr. To generate damage, 4% CSE (described above) was incubated with the cells for 24 hr following the initial seeding period but before the scratch assay. For each assay, the scratch was generated using a 200 &#181;l pipet tip. Initial images w...

Watch this Scientific Journal Video about Optimization of the Wound Scratch Assay to Detect Changes in Murine Mesenchymal Stromal Cell Migration After Damage by Soluble Cigarette Smoke Extract at JoVE

Optimization of the Wound Scratch Assay to Detect Changes in Murine Mesenchymal Stromal Cell Migration After Damage by Soluble Cigarette Smoke Extract

The capacity to migrate is a key function of many different cell types, including mesenchymal stromal cells (MSCs). However, quantifying alterations in migratory capacity after damage is challenging. This protocol describes an easily adaptable migration assay that uses rigorous statistics to quantify changes in MSC migratory capacity after damage.

Cell migration is vital to many physiological and pathological processes including tissue development, repair, and regeneration, cancer metastasis, and ...

optimization-wound-scratch-assay-to-detect-changes-murine-mesenchymal

Research

JoVE Journal

Developmental Biology

16.8K Views.  College of the Holy Cross. The capacity to migrate is a key function of many different cell types, including mesenchymal stromal cells (MSCs). However, quantifying alterations in migratory capacity after damage is challenging. This protocol describes an easily adaptable migration assay that uses rigorous statistics to quantify changes in MSC migratory capacity after damage.

Video: Optimization of the Wound Scratch Assay to Detect Changes in Murine Mesenchymal Stromal Cell Migration After Damage by Soluble Cigarette Smoke Extract