We greatly thank the scientific community of the University Medical Center Hamburg-Eppendorf for supporting us with samples for evaluation. Namely, we thank Sabine Windhorst for NIH3T3 cells, Andrea Mordhorst for YFP-Vinculin and Maren Rudolph for RFP-Lifeact.

1. Preparation of cells
<ol>
	<li>Two days prior to the experiment, seed 3*105 HeLa or NIH3T3 cells in 2 mL of full growth medium per well of a 6-well cell-culture plate. Ensure that cells are handled in a laminar flow hood throughout this protocol.</li>
	<li>One day prior to the experiment, prepare the transfection reagents according to the manufacturer&#8217;s recommendations or an empirically determined protocol, e.g.:
	<ol>
		<li>Dilute 1 &#181;g of RFP-Lifeact and 1 &#181;g of YFP-Vinculin in a total of 200 &#181;L reduced serum medium. Vortex the transfection reagent briefly, add 4 &#181;L to 200&#160;&#181;L&#160;DNA and vortex again. Incubate the transfection mix for 15-20 min at room temperature.</li>
		<li>Add the entire transfection mix dropwise directly to the cells. Mix by shaking the plate and place it back into the incubator.</li>
	</ol>
	</li>
	<li>On the day of the experiment, prepare the sample for live imaging:
	<ol>
		<li>Prepare a 10 &#181;g/mL solution of fibronectin in PBS to coat the glass surface of a 35 mm glass bottom dish. Use only high quality 0.17 mm glass coverslips for optimal TIRF performance and avoid plastic bottom dishes. Leave the solution on the glass surface for 30 min at room temperature, then remove it and let the dish air-dry.</li>
		<li>Dilute a 0.1 &#181;m multi-fluorescent beads solution to a density of 1.8 x 109 particles per mL in distilled water and add the solution for 30-60 s to the fibronectin-coated glass surface. Immediately remove the solution and let the dish air-dry. 
		NOTE: This step is necessary only if the TIRF plane should be found before seeding cells and/or to acquire a 2-color reference image for bead-based image registration.</li>
		<li>Prepare a 0.1 M ascorbic acid (AA) solution and dilute it to a final concentration of 0.1 mM in growth medium (AA-medium). Place the solution in a 37 &#176;C water bath. 
		NOTE: Use fluorescence-optimized cell culture medium if possible, such as phenolred-free and (ribo-) flavin-reduced medium. AA is an anti-oxidizing agent that can reduce phototoxic effects during live imaging14. We have tested it successfully in this assay, i.e. more cells appeared healthy under the conditions applied than without AA addition. However, the pH of the medium was lowered by 0.17 pH units.</li>
		<li>Wash the cells with 2 mL PBS, add 250 &#181;L Trypsin-EDTA and wait until the cells are fully detached (2-3 min in a 37 &#176;C incubator). Resuspend the cells carefully in 1 mL pre-warmed AA-medium with a pipette and add it to 4 mL AA-medium in a 15 mL cell culture tube. Place the cell suspension with a slightly opened lid in an incubator set to 37 &#176;C and 5% CO2 in the vicinity of the microscope.</li>
		<li>Add 1 mL pre-warmed AA-medium to the glass bottom dish and place it in the holder of the pre-heated microscope (see next paragraph).</li>
	</ol>
	</li>
</ol>
2. Live imaging
<ol>
	<li>Start the environmental control of the microscope to achieve a stable 37 &#176;C, 5% CO2 and humid atmosphere. 
	NOTE: Here, a small stage top incubation chamber has been used that allowed stable settings within about 15min. Larger incubators will need more time to achieve stable conditions.</li>
	<li>Fix all acquisition settings at the microscope before the cell suspension is applied:
	<ol>
		<li>Set the time-interval to 30 s and the duration to 60-90 min. Activate the auto-focusing function of the hardware-based auto-focus for every time point (value &#8220;1&#8221;).</li>
		<li>Adjust the camera exposure and gain, as well as the laser power for every channel. High gain levels, low exposure time and low laser power are recommendable to reduce photo-toxicity. 
		NOTE: The data presented here was acquired with 200 ms exposure, gain level 500 and 20% laser power that equals excitation intensities of 0.5 W/cm&#178; for 488 nm and 1 W/cm&#178; for 561 nm, respectively.</li>
		<li>Set the z-stack for the spinning-disk channels to 10 &#181;m with 0.4 &#181;m spacing. De-activate z-stacks for the TIRF channels. Set the bottom-offset to &#8220;0&#8221;, i.e. the lowest plane will be the focus position of the hardware auto-focus.</li>
		<li>Activate the multi-point function &#8220;stage positions&#8221;. 
		NOTE: Up to 3 positions can be recorded in a 30 s time interval.</li>
	</ol>
	</li>
	<li>Find the fluorescent beads with epi-fluorescent illumination at the ocular or on the computer screen, then activate one TIRF channel and set the illumination angle to a value that denotes TIRF illumination. Activate the auto-focus by pushing the button at the microscope panel and adjust the focus with the offset wheel. Acquire a 2-color dataset, i.e. TIRF-488 and TIRF-561, for subsequent bead-based image registration (see point 3.1).
	<ol>
		<li>Optional: To ensure TIRF illumination, add a few microliters of the freely floating fluorescent multicolor beads suspension (see point 1.3.2.). Activate the live view of a TIRF channel and increase the illumination angle. The non-adherent beads will disappear beyond the critical angle, ensuring a correct TIRF illumination8.</li>
	</ol>
	</li>
	<li>Mix the cell suspension again by inverting the closed tube 2-3 times, and apply 1 mL of the cells to the imaging dish.</li>
	<li>Quickly find double-transfected cells with low level epi-fluorescent illumination. Center the cells in the live camera preview using bright field illumination and mark the position. Find another 1-2 points of interest and save them to the positions list. 
	NOTE: At the beginning, the cells easily can detach due to stage movement, hence set 4-5 positions and re-check all before starting image acquisition. Afterwards, discard 1-2 positions.</li>
	<li>Start data acquisition by clicking on the &#8220;Sequence&#8221; button.</li>
</ol>
3. Image post-processing in ImageJ
<ol>
	<li>In order to generate a registration-free hyperstack in FIJI15, a macro named &#8220;SD-TIRF_helper&#8221; has been written that can be applied to 2-4 channel SD-TIRF timelapse datasets. Save the file &#8220;SD-TIRF_helper_JoVE.ijm&#8221; in the FIJI sub-folder &#8220;macros&#8221; and run the macro by clicking on the menu command &#8220;Plugins&#62;Macros&#62;Run&#8230;&#8221;.
	<ol>
		<li>If the color channels need registration correction, select the option and create a new bead-based registration reference (landmark file) or use an existing file that was created before. 
		NOTE: The turboreg plugin16 will be applied to fluorescence beads reference images. Install the plugin in FIJI software according to general guidelines for plugin installations.</li>
		<li>Import the data with the bio-formats importer and choose hyperstack as a viewing option. Load the image dataset, select the SD-series in the first step, and the TIRF-series in the second step. FIJI will display the data sorted by channel and stage position, i.e. normally all SD-channels and all TIRF-channels show up as one hyperstack for every stage position that has been selected. 
		NOTE: Data import is possible from various file types, for example TIFF-series or platform-dependent file types such as *.nd. The file type cannot be recognized only if it was not exported by the acquisition software as independent, compression-less TIFF format.</li>
		<li>Apply the registration correction to the respective channels by loading the pre-determined landmarks file.</li>
		<li>Select the desired color look-up table (LUT) for every SD- and TIRF channel and merge them into a single, multi-dimensional hyperstack. 
		NOTE: During processing of the TIRF channels, a number of z-planes with zero intensity values are added on top of the bottom plane that matches with the number of z-planes in the SD dataset. This step is important for the visualization of the final hyperstack. This methodology is correct, since the depth of the TIRF illumination (less than 200nm7) is smaller than the z-step size of the SD stack (400 nm).</li>
	</ol>
	</li>
</ol>

<ol><li>Hell, S. W., Wichmann, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Breaking+the+diffraction+resolution+limit+by+stimulated+emission%3A+stimulated-emission-depletion+fluorescence+microscopy%5BTitle%5D)+AND+%22Optics+Letters%22%5BJournal%5D)">Breaking the diffraction resolution limit by stimulated emission: stimulated-emission-depletion fluorescence microscopy.</a> Optics Letters. 19 (11), 780(1994).</li>
<li>Gustafsson, M. G. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Surpassing+the+lateral+resolution+limit+by+a+factor+of+two+using+structured+illumination+microscopy%5BTitle%5D)+AND+%22Journal+of+Microscopy%22%5BJournal%5D)">Surpassing the lateral resolution limit by a factor of two using structured illumination microscopy.</a> Journal of Microscopy. 198 (2), 82-87 (2000).</li>
<li>Betzig, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Imaging+intracellular+fluorescent+proteins+at+nanometer+resolution%5BTitle%5D)+AND+%22Science%22%5BJournal%5D)">Imaging intracellular fluorescent proteins at nanometer resolution.</a> Science. 313 (5793), New York, N.Y. 1642-1645 (2006).</li>
<li>Hess, S. T., Girirajan, T. P. K., Mason, M. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Ultra-high+resolution+imaging+by+fluorescence+photoactivation+localization+microscopy%5BTitle%5D)+AND+%22Biophysical+Journal%22%5BJournal%5D)">Ultra-high resolution imaging by fluorescence photoactivation localization microscopy.</a> Biophysical Journal. 91 (11), 4258-4272 (2006).</li>
<li>Rust, M. J., Bates, M., Zhuang, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Sub-diffraction-limit+imaging+by+stochastic+optical+reconstruction+microscopy+%28STORM%29%5BTitle%5D)+AND+%22Nature+methods%22%5BJournal%5D)">Sub-diffraction-limit imaging by stochastic optical reconstruction microscopy (STORM).</a> Nature methods. 3 (10), 793-796 (2006).</li>
<li>van de Linde, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Direct+stochastic+optical+reconstruction+microscopy+with+standard+fluorescent+probes%5BTitle%5D)+AND+%22Nature+protocols%22%5BJournal%5D)">Direct stochastic optical reconstruction microscopy with standard fluorescent probes.</a> Nature protocols. 6 (7), 991-1009 (2011).</li>
<li>Zobiak, B., Failla, A. V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Advanced+spinning+disk-TIRF+microscopy+for+faster+imaging+of+the+cell+interior+and+the+plasma+membrane%5BTitle%5D)+AND+%22Journal+of+Microscopy%22%5BJournal%5D)">Advanced spinning disk-TIRF microscopy for faster imaging of the cell interior and the plasma membrane.</a> Journal of Microscopy. 269 (3), 282-290 (2018).</li>
<li>Mattheyses, A. L., Simon, S. M., Rappoport, J. Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Imaging+with+total+internal+reflection+fluorescence+microscopy+for+the+cell+biologist%5BTitle%5D)+AND+%22Journal+of+Cell+Science%22%5BJournal%5D)">Imaging with total internal reflection fluorescence microscopy for the cell biologist.</a> Journal of Cell Science. 123 (21), 3621-3628 (2010).</li>
<li>Burchfield, J. G., Lopez, J. A., Vallotton, P., William, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Exocytotic+vesicle+behaviour+assessed+by+total+internal+reflection+fluorescence+microscopy%5BTitle%5D)+AND+%22Traffic%22%5BJournal%5D)">Exocytotic vesicle behaviour assessed by total internal reflection fluorescence microscopy.</a> Traffic. 11 (4), 429-439 (2010).</li>
<li>Oreopoulos, J., Berman, R., Browne, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Spinning-disk+confocal+microscopy.+present+technology+and+future+trends%5BTitle%5D)+AND+%22Methods+in+Cell+Biology%22%5BJournal%5D)">Spinning-disk confocal microscopy. present technology and future trends.</a> Methods in Cell Biology. 123, 153-175 (2014).</li>
<li>Murray, J. M., Appleton, P. L., Swedlow, J. R., Waters, J. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Evaluating+performance+in+three-dimensional+fluorescence+microscopy%5BTitle%5D)+AND+%22Journal+of+Microscopy%22%5BJournal%5D)">Evaluating performance in three-dimensional fluorescence microscopy.</a> Journal of Microscopy. 228 (3), 390-405 (2007).</li>
<li>Trache, A., Lim, S. -M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Integrated+microscopy+for+real-time+imaging+of+mechanotransduction+studies+in+live+cells%5BTitle%5D)+AND+%22Journal+of+Biomedical+Optics%22%5BJournal%5D)">Integrated microscopy for real-time imaging of mechanotransduction studies in live cells.</a> Journal of Biomedical Optics. 14 (3), 034024(2009).</li>
<li>Stehbens, S., Pemble, H., Murrow, L., Wittmann, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Imaging+intracellular+protein+dynamics+by+spinning+disk+confocal+microscopy%5BTitle%5D)+AND+%22Methods+in+Enzymology%22%5BJournal%5D)">Imaging intracellular protein dynamics by spinning disk confocal microscopy.</a> Methods in Enzymology. , 293-313 (2012).</li>
<li>Waldchen, S., Lehmann, J., Klein, T., Van De Linde, S., Sauer, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Light-induced+cell+damage+in+live-cell+super-resolution+microscopy%5BTitle%5D)+AND+%22Scientific+Reports%22%5BJournal%5D)">Light-induced cell damage in live-cell super-resolution microscopy.</a> Scientific Reports. 5, 1-12 (2015).</li>
<li>Schindelin, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Fiji%3A+an+open-source+platform+for+biological-image+analysis%5BTitle%5D)+AND+%22Nature+Methods%22%5BJournal%5D)">Fiji: an open-source platform for biological-image analysis.</a> Nature Methods. 9 (7), 676-682 (2012).</li>
<li>Thévenaz, P., Ruttimann, U. E., Unser, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((A+pyramid+approach+to+subpixel+registration+based+on+intensity%5BTitle%5D)+AND+%22IEEE+Transactions+on+Image+Processing%22%5BJournal%5D)">A pyramid approach to subpixel registration based on intensity.</a> IEEE Transactions on Image Processing. 7 (1), 27-41 (1998).</li>
<li>Partridge, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Initiation+of+attachment+and+generation+of+mature+focal+adhesions+by+integrin-containing+filopodia+in+cell+spreading%5BTitle%5D)+AND+%22Molecular+Biology+of+the+Cell%22%5BJournal%5D)">Initiation of attachment and generation of mature focal adhesions by integrin-containing filopodia in cell spreading.</a> Molecular Biology of the Cell. 17 (10), (2006).</li>
<li>Dubin-Thaler, B. J., Giannone, G., Döbereiner, H. G., Sheetz, M. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Nanometer+analysis+of+cell+spreading+on+matrix-coated+surfaces+reveals+two+distinct+cell+states+and+STEPs%5BTitle%5D)+AND+%22Biophysical+Journal%22%5BJournal%5D)">Nanometer analysis of cell spreading on matrix-coated surfaces reveals two distinct cell states and STEPs.</a> Biophysical Journal. 86 (3), 1794-1806 (2004).</li>
<li>Choi, C. K., Vicente-Manzanares, M., Zareno, J., Whitmore, L. A., Mogilner, A., Horwitz, A. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Actin+and+%CE%B1-actinin+orchestrate+the+assembly+and+maturation+of+nascent+adhesions+in+a+myosin+II+motor-independent+manner%5BTitle%5D)+AND+%22Nature+Cell+Biology%22%5BJournal%5D)">Actin and α-actinin orchestrate the assembly and maturation of nascent adhesions in a myosin II motor-independent manner.</a> Nature Cell Biology. 10 (9), 1039-1050 (2008).</li>
<li>Bachir, A. I., Zareno, J., Moissoglu, K., Plow, E. F., Gratton, E., Horwitz, A. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Integrin-associated+complexes+form+hierarchically+with+variable+stoichiometry+in+nascent+adhesions%5BTitle%5D)+AND+%22Current+Biology%22%5BJournal%5D)">Integrin-associated complexes form hierarchically with variable stoichiometry in nascent adhesions.</a> Current Biology. 24 (16), 1845-1853 (2014).</li>
<li>Sun, Z., Guo, S. S., Fässler, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Integrin-mediated+mechanotransduction%5BTitle%5D)+AND+%22Journal+of+Cell+Biology%22%5BJournal%5D)">Integrin-mediated mechanotransduction.</a> Journal of Cell Biology. 215 (4), 445-456 (2016).</li>
<li>Shao, L., Kner, P., Rego, E. H., Gustafsson, M. G. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Super-resolution+3D+microscopy+of+live+whole+cells+using+structured+illumination%5BTitle%5D)+AND+%22Nat.+Methods%22%5BJournal%5D)">Super-resolution 3D microscopy of live whole cells using structured illumination.</a> Nat. Methods. 8 (12), 1044-1046 (2011).</li>
<li>Chen, B. -C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Lattice+light-sheet+microscopy%3A+Imaging+molecules+to+embryos+at+high+spatiotemporal+resolution%5BTitle%5D)+AND+%22Science%22%5BJournal%5D)">Lattice light-sheet microscopy: Imaging molecules to embryos at high spatiotemporal resolution.</a> Science. 346 (6208), 1257998-1257998 (2014).</li>
<li>Fu, Y., Winter, P. W., Rojas, R., Wang, V., McAuliffe, M., Patterson, G. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Axial+superresolution+via+multiangle+TIRF+microscopy+with+sequential+imaging+and+photobleaching%5BTitle%5D)+AND+%22Proceedings+of+the+National+Academy+of+Sciences%22%5BJournal%5D)">Axial superresolution via multiangle TIRF microscopy with sequential imaging and photobleaching.</a> Proceedings of the National Academy of Sciences. 113 (16), 4368-4373 (2016).</li>
<li>Boulanger, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/pubmed?term=((Fast+high-resolution+3D+total+internal+reflection+fluorescence+microscopy+by+incidence+angle+scanning+and+azimuthal+averaging%5BTitle%5D)+AND+%22Proceedings+of+the+National+Academy+of+Sciences%22%5BJournal%5D)">Fast high-resolution 3D total internal reflection fluorescence microscopy by incidence angle scanning and azimuthal averaging.</a> Proceedings of the National Academy of Sciences. 111 (48), 17164-17169 (2014).</li>
</ol>

The authors have nothing to disclose.

In this paper was presented the first successful implementation of SD and TIRF microscopy in a configuration suitable for performing live cell imaging experiments, i.e. high acquisition rates such as 2 SD-TIRF image stacks per minute at 3 different stage positions, corresponding to a total of 168 frames (circa 3 frames per second), were acquired. The few SD-TIRF microscopes that were described previously12,13, mainly lack of sufficiently high imaging spe...

Our days, light microscopy techniques providing high/super resolution imaging in fixed and living specimen are developing rapidly. Super-resolution techniques such as stimulated emission depletion (STED), structured illumination microscopy (SIM) and photo-activation localization microscopy (PALM) or direct stochastic optical reconstruction microscopy (STORM), respectively, are commercially available and enable imaging of subcellular structures showing details almost on the molecular scale1,2,3,4,5,6. However, these approaches still have limited applicability for live imaging experiments in which large volumes need to be visualized with multiple frames per second acquisition speed. Varieties of highly dynamic processes regulated via the plasma membrane, e.g. endo-/exocytosis, adhesion, migration or signaling, occur with high speed within large cellular volumes. Recently, in order to fill up this gap, an integrated microscopy technique was proposed called spinning disk-TIRF (SD-TIRF)7. In detail, TIRF microscopy permits to specifically isolate and localize the plasma membrane8,9, while SD microscopy is one of the most sensitive and fast live imaging techniques for the visualization and tracking of subcellular organelles in the cytoplasm10,11. The combination of both imaging techniques in a single setup has already been realized in the past12,13, however, the microscope presented here (Figure 1) finally meets the criteria to perform live imaging SD-TIRF experiments of the aforementioned processes at 3 frames per second speed. Since this microscope is commercially available, the goal of this manuscript is to describe in details and provide open source tools and protocols for image acquisition, registration, and visualization associated with SD-TIRF microscopy.
The setup is based on an inverted microscope connected to two scan units via independent ports - the left port is linked to the SD unit and the back port to scanner unit for TIRF and photo-activation/-bleaching experiments. Up to 6 lasers (405/445/488/515/561/640 nm) can be used for excitation. For excitation and detection of the fluorescence signal, either a 100x/NA1.45 oil or 60x/NA1.49 oil TIRF objective, respectively, have been employed. The emitted light is split by a dichroic mirror (561 nm long-pass or 514 nm long-pass) and filtered by various band-pass filters (55 nm wide centered at 525 nm, 54 nm wide centered at 609 nm for green and red fluorescence, respectively) placed in front of the two EM-CCD cameras. Please note that more technical details about the setup are listed in Zobiak et al.7. In TIRF configuration, the SD unit is moved out of the light path within circa 0.5 s so that the same two cameras can be used for detection, allowing faster switching between the two imaging modalities compared to circa 1 s that was reported in the past13. This feature enables dual-channel simultaneous acquisition, thus 4 channels SD-TIRF imaging at previously unmatched speed and accuracy can be performed. Moreover, alignment between SD and TIRF images is unnecessary. Image alignment between the two cameras, however, has to be checked before starting the experiment and corrected if necessary. In the following protocol, a registration correction routine was implemented in a self-written ImageJ macro. Moreover, the macro was mainly designed to allow a simultaneous visualization of SD- and TIRF datasets despite their different dimensionality. The acquisition software itself did not provide these features.

<table><tbody><tr><td>&lt;strong&gt;Microscope and accessories&lt;/strong&gt;</td><td></td><td></td><td></td></tr><tr><td>SD-TIRF microscope</td><td>Visitron Systems</td><td></td><td></td></tr><tr><td>Ti with perfect focus system</td><td>Nikon</td><td></td><td>Inverted microscope stand</td></tr><tr><td>CSU-W1 T2</td><td>Yokogawa</td><td></td><td>Spinning disk unit in dual-camera configuration</td></tr><tr><td>iLAS2&amp;nbsp;</td><td>Roper Scientific</td><td></td><td>TIRF/FRAP scanner</td></tr><tr><td>Evolve&amp;nbsp;</td><td>Photometrix</td><td></td><td>EM-CCD cameras</td></tr><tr><td>PiezoZ stage</td><td>Ludl Electronic Products</td><td></td><td>Motorized Z stage</td></tr><tr><td>Bioprecision2 XY stage</td><td>Ludl Electronic Products</td><td></td><td>Motorized XY stage</td></tr><tr><td>Stage top incubation chamber</td><td>Okolab</td><td>Bold Line</td><td>Temperature, CO&lt;sub&gt;2&lt;/sub&gt; and humidity supply</td></tr><tr><td>&lt;strong&gt;Cell culture&lt;/strong&gt;</td><td></td><td></td><td></td></tr><tr><td>HeLa cervical cancer cells</td><td>DSMZ</td><td>ACC-57</td><td></td></tr><tr><td>NIH3T3 fibroblasts</td><td>DSMZ</td><td>ACC-59</td><td></td></tr><tr><td>Dulbecco&#039;s phosphate buffered saline (PBS)</td><td>Gibco</td><td>14190144</td><td></td></tr><tr><td>Trypsin-EDTA 0.05%</td><td>Gibco</td><td>25300054</td><td></td></tr><tr><td>Dulbecco&#039;s Modified Eagle Medium + GlutaMAX-I (DMEM)</td><td>Gibco</td><td>31966-021</td><td></td></tr><tr><td>OptiMEM</td><td>Gibco</td><td>31985070</td><td>Reduced serum medium</td></tr><tr><td>Fetal calf serum (FCS)</td><td>Gibco</td><td>10500064</td><td></td></tr><tr><td>Penicillin/Streptomycin (PenStrep)</td><td>Gibco</td><td>15140148</td><td></td></tr><tr><td>Full growth medium (DMEM supplemented with 10% FCS and 1% PenStrep)</td><td></td><td></td><td></td></tr><tr><td>TurboFect</td><td>ThermoFisher Scientific</td><td>R0531</td><td>Transfection reagent</td></tr><tr><td>Ascorbic acid (AA)</td><td>Sigma</td><td>A544-25G</td><td></td></tr><tr><td>6-well cell culture plate</td><td>Sarstedt</td><td>83.392</td><td></td></tr><tr><td>Glass bottom dishes</td><td>MatTek</td><td>P35G-1.5-10-C</td><td>35mm, 0.17mm glass coverslip</td></tr><tr><td>Fibronectin, bovine plasma</td><td>ThermoFisher Scientific</td><td>33010018</td><td></td></tr><tr><td>Neubauer improved chamber</td><td>VWR</td><td>631-0696</td><td></td></tr><tr><td>TetraSpeck beads</td><td>ThermoFisher Scientific</td><td>T7279</td><td></td></tr><tr><td>&lt;strong&gt;Plasmids&lt;/strong&gt;</td><td></td><td></td><td></td></tr><tr><td>RFP-Lifeact</td><td></td><td></td><td>Maren Rudolph, Institute of Medical Microbiology, University Medical Center Hamburg Eppendorf, Germany</td></tr><tr><td>YFP-Vinculin</td><td></td><td></td><td>Andrea Mordhorst, Institute of Medical Microbiology, University Medical Center Hamburg Eppendorf, Germany</td></tr><tr><td>&lt;strong&gt;Software and plugins&lt;/strong&gt;</td><td></td><td></td><td></td></tr><tr><td>VisiView</td><td>Visitron Systems</td><td></td><td>Version 3</td></tr><tr><td>ImageJ</td><td></td><td></td><td>Version 1.52c</td></tr><tr><td>Turboreg plugin</td><td></td><td></td><td>http://bigwww.epfl.ch/thevenaz/turboreg/</td></tr><tr><td>Macro &quot;SD-TIRF_helper_JoVE.ijm&quot;</td><td>this publication</td><td></td><td>https://github.com/bzobiak/ImageJ</td></tr><tr><td>Volocity</td><td>PerkinElmer</td><td></td><td>Version 6.2.2</td></tr></tbody></table>

visualizing adhesion formation in cells by means of advanced spinning disk-total internal reflection fluorescence microscopy

In living cells, processes such as adhesion formation involve extensive structural changes in the plasma membrane and the cell interior. In order to visualize these highly dynamic events, two complementary light microscopy techniques that allow fast imaging of live samples were combined: spinning disk microscopy (SD) for fast and high-resolution volume recording and total internal reflection fluorescence (TIRF) microscopy for precise localization and visualization of the plasma membrane. A comprehensive and complete imaging protocol will be shown for guiding through sample preparation, microscope calibration, image formation and acquisition, resulting in multi-color SD-TIRF live imaging series with high spatio-temporal resolution. All necessary image post-processing steps to generate multi-dimensional live imaging datasets, i.e. registration and combination of the individual channels, are provided in a self-written macro for the open source software ImageJ. The imaging of fluorescent proteins during initiation and maturation of adhesion complexes, as well as the formation of the actin cytoskeletal network, was used as a proof of principle for this novel approach. The combination of high resolution 3D microscopy and TIRF provided a detailed description of these complex processes within the cellular environment and, at the same time, precise localization of the membrane-associated molecules detected with a high signal-to-background ratio.

In order to show the potential of SD-TIRF imaging, an assay was developed that should reveal the spatio-temporal organization of cell-matrix adhesion complexes and their interaction with the cytoskeleton during cellular adhesion. Therefore, adherent HeLa or, alternatively, NIH3T3 cells were transfected with YFP-Vinculin and RFP-Lifeact for 18-24 h, trypsinized and seeded onto fibronectin-coated glass bottom dishes. These cell lines were chosen for their pronounced cytoskeleton and higher ...

Watch this Scientific Journal Video about Visualizing Adhesion Formation in Cells by Means of Advanced Spinning Disk-Total Internal Reflection Fluorescence Microscopy at JoVE.com

Visualizing Adhesion Formation in Cells by Means of Advanced Spinning Disk-Total Internal Reflection Fluorescence Microscopy

An advanced microscope that permit fast and high-resolution imaging of both, the isolated plasma membrane and the surrounding intracellular volume, will be presented. The integration of spinning disk and total internal reflection fluorescence microscopy in one setup allows live imaging experiments at high acquisition rates up to 3.5 s per image stack.

In living cells, processes such as adhesion formation involve extensive structural changes in the plasma membrane and the cell interior. In order to ...

visualizing-adhesion-formation-cells-means-advanced-spinning-disk

Research

JoVE Journal

Bioengineering

6.5K Views.  University Medical Center Hamburg-Eppendorf. An advanced microscope that permit fast and high-resolution imaging of both, the isolated plasma membrane and the surrounding intracellular volume, will be presented. The integration of spinning disk and total internal reflection fluorescence microscopy in one setup allows live imaging experiments at high acquisition rates up to 3.5 s per image stack.

Video: Visualizing Adhesion Formation in Cells by Means of Advanced Spinning Disk-Total Internal Reflection Fluorescence Microscopy

Visualization of Cortex Organization and Dynamics in Microorganisms, using Total Internal Reflection Fluorescence Microscopy

TIRF microscopy has emerged as a powerful imaging technology to study spatio-temporal dynamics of fluorescent molecules in vitro and in living cells1. The optical phenomenon of total internal reflection occurs when light passes from a medium with high refractive index into a medium with low refractive index at an angle larger than a characteristic critical angle (i.e. closer to being parallel with the boundary). Although all light is reflected back under such conditions, an evanescent wave is created that propagates across and along the boundary, which decays exponentially with distance, and only penetrates sample areas that are 100-200 nm near the interface2. In addition to providing superior axial resolution, the reduced excitation of out of focus fluorophores creates a very high signal to noise ratios and minimizes damaging effects of photobleaching2,3. Being a widefield technique, TIRF also allows faster image acquisition than most scanning based confocal setups.
At first glance, the low penetration depth of TIRF seems to be incompatible with imaging of bacterial and fungal cells, which are often surrounded by thick cell walls. On the contrary, we have found that the cell walls of yeast and bacterial cells actually improve the usability of TIRF and increase the range of observable structures4-8. Many cellular processes can therefore be directly accessed by TIRF in small, single-cell microorganisms, which often offer powerful genetic manipulation techniques. This allows us to perform in vivo biochemistry experiments, where kinetics of protein interactions and activities can be directly assessed in living cells.
We describe here the individual steps required to obtain high quality TIRF images for Saccharomyces cerevisiae or Bacillus subtilis cells. We point out various problems that can affect TIRF visualization of fluorescent probes in cells and illustrate the procedure with several application examples. Finally, we demonstrate how TIRF images can be further improved using established image restoration techniques.

Total Internal Reflection Fluorescence (TIRF) microscopy is a powerful approach to observe structures close to the cell surface at high contrast and temporal resolution. We demonstrate how TIRF can be employed to study protein dynamics at the cortex of cell wall-enclosed bacterial and fungal cells.

TIRF microscopy has emerged as  a powerful imaging technology to study spatio-temporal dynamics of fluorescent molecules  in vitro and in living cells1. ...

Nanotopology of Cell Adhesion upon Variable-Angle Total Internal Reflection Fluorescence Microscopy (VA-TIRFM)

Surface topology, e.g. of cells growing on a substrate, is determined with nanometer precision by Variable-Angle Total Internal Reflection Fluorescence Microscopy (VA-TIRFM). Cells are cultivated on transparent slides and incubated with a fluorescent marker homogeneously distributed in their plasma membrane. Illumination occurs by a parallel laser beam under variable angles of total internal reflection (TIR) with different penetration depths of the evanescent electromagnetic field. Recording of fluorescence images upon irradiation at about 10 different angles permits to calculate cell-substrate distances with a precision of a few nanometers. Differences of adhesion between various cell lines, e.g. cancer cells and less malignant cells, are thus determined. In addition, possible changes of cell adhesion upon chemical or photodynamic treatment can be examined. In comparison with other methods of super-resolution microscopy light exposure is kept very small, and no damage of living cells is expected to occur.

Nanotopology of Cell Adhesion upon Variable-Angle Total Internal Reflection Fluorescence Microscopy VA-TIRFM

Topology of cell adhesion on a substrate is measured with nanometre precision by variable-angle total internal reflection fluorescence microscopy (VA-TIRFM).

Surface topology, e.g. of cells growing on a substrate, is determined with nanometer precision by Variable-Angle Total Internal Reflection Fluorescence ...

Assay of Adhesion Under Shear Stress for the Study of T Lymphocyte-Adhesion Molecule Interactions

Overall, T cell adhesion is a critical component of function, contributing to the distinct processes of cellular recruitment to sites of inflammation and interaction with antigen presenting cells (APC) in the formation of immunological synapses. These two contexts of T cell adhesion differ in that T cell-APC interactions can be considered static, while T cell-blood vessel interactions are challenged by the shear stress generated by circulation itself. T cell-APC interactions are classified as static in that the two cellular partners are static relative to each other. Usually, this interaction occurs within the lymph nodes. As a T cell interacts with the blood vessel wall, the cells arrest and must resist the generated shear stress.1,2 These differences highlight the need to better understand static adhesion and adhesion under flow conditions as two distinct regulatory processes. The regulation of T cell adhesion can be most succinctly described as controlling the affinity state of integrin molecules expressed on the cell surface, and thereby regulating the interaction of integrins with the adhesion molecule ligands expressed on the surface of the interacting cell. Our current understanding of the regulation of integrin affinity states comes from often simplistic in vitro model systems. The assay of adhesion using flow conditions described here allows for the visualization and accurate quantification of T cell-epithelial cell interactions in real time following a stimulus. An adhesion under flow assay can be applied to studies of adhesion signaling within T cells following treatment with inhibitory or stimulatory substances. Additionally, this assay can be expanded beyond T cell signaling to any adhesive leukocyte population and any integrin-adhesion molecule pair.

This flow adhesion assay provides a simple, high impact model of T cell-epithelial cell interactions. A syringe pump is used to generate shear stress, and confocal microscopy captures images for quantification. The goal of these studies is to effectively quantify T cell adhesion using flow conditions.

Overall, T cell adhesion is a critical component of function, contributing to the distinct processes of cellular recruitment to sites of inflammation and ...

Immunology and Infection

Visualizing Actin and Microtubule Coupling Dynamics In Vitro by Total Internal Reflection Fluorescence (TIRF) Microscopy

Traditionally, the actin and microtubule cytoskeletons have been studied as separate entities, restricted to specific cellular regions or processes, and regulated by different suites of binding proteins unique for each polymer. Many studies now demonstrate that the dynamics of both cytoskeletal polymers are intertwined and that this crosstalk is required for most cellular behaviors. A number of proteins involved in actin-microtubule interactions have already been identified (i.e., Tau, MACF, GAS, formins, and more) and are well characterized with regard to either actin or microtubules alone. However, relatively few studies showed assays of actin-microtubule coordination with dynamic versions of both polymers. This may occlude emergent linking mechanisms between actin and microtubules. Here, a total internal reflection fluorescence (TIRF) microscopy-based in vitro reconstitution technique permits the visualization of both actin and microtubule dynamics from the one biochemical reaction. This technique preserves the polymerization dynamics of either actin filament or microtubules individually or in the presence of the other polymer. Commercially available Tau protein is used to demonstrate how actin-microtubule behaviors change in the presence of a classic cytoskeletal crosslinking protein. This method can provide reliable functional and mechanistic insights into how individual regulatory proteins coordinate actin-microtubule dynamics at a resolution of single filaments or higher-order complexes.

Visualizing Actin and Microtubule Coupling Dynamics In Vitro by Total Internal Reflection Fluorescence TIRF Microscopy

This protocol is a guide for visualizing dynamic actin and microtubules using an in vitro total internal fluorescence (TIRF) microscopy assay.

Traditionally, the actin and microtubule cytoskeletons have been studied as separate entities, restricted to specific cellular regions or processes, and ...

Biochemistry

Traction Microscopy Integrated with Microfluidics for Chemotactic Collective Migration

Cells change migration patterns in response to chemical stimuli, including the gradients of the stimuli. Cellular migration in the direction of a chemical gradient, known as chemotaxis, plays an important role in development, the immune response, wound healing, and cancer metastasis. While chemotaxis modulates the migration of single cells as well as collections of cells in vivo, in vitro research focuses on single-cell chemotaxis, partly due to the lack of the proper experimental tools. To fill that gap, described here is a unique experimental system that combines microfluidics and micropatterning to demonstrate the effects of chemical gradients on collective cell migration. Furthermore, traction microscopy and monolayer stress microscopy are incorporated into the system to characterize changes in cellular force on the substrate as well as between neighboring cells. As proof-of-concept, the migration of micropatterned circular islands of Madin-Darby canine kidney (MDCK) cells is tested under a gradient of hepatocyte growth factor (HGF), a known scattering factor. It is found that cells located near the higher concentration of HGF migrate faster than those on the opposite side within a cell island. Within the same island, cellular traction is similar on both sides, but intercellular stress is much lower on the side of higher HGF concentration. This novel experimental system can provide new opportunities to studying the mechanics of chemotactic migration by cellular collectives.

Collective cell migration in development, wound healing, and cancer metastasis is often guided by the gradients of growth factors or signaling molecules. Described here is an experimental system combining traction microscopy with a microfluidic system and a demonstration of how to quantify the mechanics of collective migration under biochemical gradient.

Cells change migration patterns in response to chemical stimuli, including the gradients of the stimuli. Cellular migration in the direction of a chemical ...

Dynamic Adhesion Assay for the Functional Analysis of Anti-adhesion Therapies in Inflammatory Bowel Disease

Gut homing of immune cells is important for the pathogenesis of inflammatory bowel diseases (IBD). Integrin-dependent cell adhesion to addressins is a crucial step in this process and therapeutic strategies interfering with adhesion have been successfully established. The anti-&#945;4&#946;7 integrin antibody, vedolizumab, is used for the clinical treatment of Crohn&#39;s disease (CD) and ulcerative colitis (UC) and further compounds are likely to follow.
The details of the adhesion procedure and the action mechanisms of anti-integrin antibodies are still unclear in many regards due to the limited available techniques for the functional research in this field.
Here, we present a dynamic adhesion assay for the functional analysis of human cell adhesion under flow conditions and the impact of anti-integrin therapies in the context of IBD. It is based on the perfusion of primary human cells through addressin-coated ultrathin glass capillaries with real-time microscopic analysis. The assay offers a variety of opportunities for refinements and modifications and holds potentials for mechanistic discoveries and translational applications.

Dynamic adhesion of immune cells to the vessel wall is a prerequisite for gut homing. Here, we present a protocol for a functional in vitro assay for the impact analysis of anti-integrin antibodies, chemokines or other factors on the dynamic cell adhesion of human cells using addressin-coated capillaries.

Gut homing of immune cells is important for the pathogenesis of inflammatory bowel diseases (IBD). Integrin-dependent cell adhesion to addressins is a ...

Control of Cell Adhesion using Hydrogel Patterning Techniques for Applications in Traction Force Microscopy

Traction force microscopy (TFM) is the main method used in mechanobiology to measure cell forces. Commonly this is being used for cells adhering to flat soft substrates that deform under cell traction (2D-TFM). TFM relies on the use of linear elastic materials, such as polydimethylsiloxane (PDMS) or polyacrylamide (PA). For 2D-TFM on PA, the difficulty in achieving high throughput results mainly from the large variability of cell shapes and tractions, calling for standardization. We present a protocol to rapidly and efficiently fabricate micropatterned PA hydrogels for 2D-TFM studies. The micropatterns are first created by maskless photolithography using near-UV light where extracellular matrix proteins bind only to the micropatterned regions, while the rest of the surface remains non-adhesive for cells. The micropatterning of extracellular matrix proteins is due to the presence of active aldehyde groups, resulting in adhesive regions of different shapes to accommodate either single cells or groups of cells. For TFM measurements, we use PA hydrogels of different elasticity by varying the amounts of acrylamide and bis-acrylamide and tracking the displacement of embedded fluorescent beads to reconstruct cell traction fields with regularized Fourier Transform Traction Cytometry (FTTC).
To further achieve precise recording of cell forces, we describe the use of a controlled dose of patterned light to release cell tractions in defined regions for single cells or groups of cells. We call this method local UV illumination traction force microscopy (LUVI-TFM). With enzymatic treatment, all cells are detached from the sample simultaneously, whereas with LUVI-TFM traction forces of cells in different regions of the sample can be recorded in sequence. We demonstrate the applicability of this protocol (i) to study cell traction forces as a function of controlled adhesion to the substrate, and (ii) to achieve a greater number of experimental observations from the same sample.

Near-UV lithography and traction force microscopy are combined to measure cellular forces on micropatterned hydrogels. The targeted light-induced release of single cells enables a high number of measurements on the same sample.

Traction force microscopy (TFM) is the main method used in mechanobiology to measure cell forces. Commonly this is being used for cells adhering to flat ...

Imaging Molecular Adhesion in Cell Rolling by Adhesion Footprint Assay

Rolling adhesion, facilitated by selectin-mediated interactions, is a highly dynamic, passive motility in recruiting leukocytes to the site of inflammation. This phenomenon occurs in postcapillary venules, where blood flow pushes leukocytes in a rolling motion on the endothelial cells. Stable rolling requires a delicate balance between adhesion bond formation and their mechanically-driven dissociation, allowing the cell to remain attached to the surface while rolling in the direction of flow. Unlike other adhesion processes occurring in relatively static environments, rolling adhesion is highly dynamic as the rolling cells travel over thousands of microns at tens of microns per second. Consequently, conventional mechanobiology methods such as traction force microscopy are unsuitable for measuring the individual adhesion events and the associated molecular forces due to the short timescale and high sensitivity required. Here, we describe our latest implementation of the adhesion footprint assay to image the P-selectin: PSGL-1 interactions in rolling adhesion at the molecular level. This method utilizes irreversible DNA-based tension gauge tethers to produce a permanent history of molecular adhesion events in the form of fluorescence tracks. These tracks can be imaged in two ways: (1) stitching together thousands of diffraction-limited images to produce a large field of view, enabling the extraction of adhesion footprint of each rolling cell over thousands of microns in length, (2) performing DNA-PAINT to reconstruct super-resolution images of the fluorescence tracks within a small field of view. In this study, the adhesion footprint assay was used to study HL-60 cells rolling at different shear stresses. In doing so, we were able to image the spatial distribution of the P-selectin: PSGL-1 interaction and gain insight into their molecular forces through fluorescence intensity. Thus, this method provides the groundwork for the quantitative investigation of the various cell-surface interactions involved in rolling adhesion at the molecular level.

This protocol presents the experimental procedures to perform the adhesion footprint assay to image the adhesion events during fast cell rolling adhesion.

Rolling adhesion, facilitated by selectin-mediated interactions, is a highly dynamic, passive motility in recruiting leukocytes to the site of ...

Biology

Tension Gauge Tether Probes for Quantifying Growth Factor Mediated Integrin Mechanics and Adhesion

Multicellular organisms rely on interactions between membrane receptors and cognate ligands in the surrounding extracellular matrix (ECM) to orchestrate multiple functions, including adhesion, proliferation, migration, and differentiation. Mechanical forces can be transmitted from the cell via the adhesion receptor integrin to ligands in the ECM. The amount and spatial organization of these cell-generated forces can be modulated by growth factor receptors, including epidermal growth factor receptor (EGFR). The tools currently available to quantify crosstalk-mediated changes in cell mechanics and relate them to&#160;focal adhesions, cellular morphology, and signaling are limited. DNA-based molecular force sensors known as tension gauge tethers (TGTs) have been employed to quantify these changes. TGT probes are unique in their ability to both modulate the underlying force threshold and report piconewton scale receptor forces across the entire adherent cell surface at diffraction-limited spatial resolution. The TGT probes used here rely on the irreversible dissociation of a DNA duplex by receptor-ligand forces that generate a fluorescent signal. This allows quantification of the cumulative integrin tension (force history) of the cell. This article describes a protocol employing TGTs to study the impact of EGFR on integrin mechanics and adhesion formation. The assembly of&#160;the TGT mechanical sensing platform is systematically detailed and the procedure to image forces, focal adhesions, and cell spreading is outlined. Overall, the ability to modulate the underlying force threshold of the probe, the adhesion ligand, and the type and concentration of growth factor employed for stimulation make this a robust platform for studying the interplay of diverse membrane receptors in regulating integrin-mediated forces.

TGT surface is an innovative platform to study growth factor-integrin crosstalk. The flexible probe design, specificity of the adhesion ligand, and precise modulation of stimulation conditions allow robust quantitative assessments of EGFR-integrin interplay. The results highlight EGFR as a 'mechano-organizer' tuning integrin mechanics, influencing focal adhesion assembly and cell spreading.

Multicellular organisms rely on interactions between membrane receptors and cognate ligands in the surrounding extracellular matrix (ECM) to orchestrate ...

TIRF Microscopy to Visualize Actin and Microtubule Coupling Dynamics

Source: Henty-Ridilla, J.L., <a href="https://app.jove.com/v/64074">Visualizing Actin and Microtubule Coupling Dynamics In Vitro by Total Internal Reflection Fluorescence (TIRF) Microscopy.</a> J. Vis. Exp. (2022)
This video describes TIRF, a total internal reflection microscopy-based technique to visualize actin and microtubule polymerization dynamics. The method allows the high-resolution imaging of actin and microtubule coupling dynamics in real-time, which is essential for understanding cellular crosstalks.

Mikroskopia TIRF do wizualizacji dynamiki sprzężenia aktyny i mikrotubul

Source: Henty-Ridilla, J.L., Visualizing Actin and Microtubule Coupling Dynamics In Vitro by Total Internal Reflection Fluorescence (TIRF) Microscopy. J. ...