S.W.K. and C.P.R. gratefully acknowledge support from the Office of Naval Research Navy Undersea Research Program (Grant No. N00014-21-1-2072). S.W.K. acknowledges support from the Naval Research Enterprise Internship Program. C.P.R and C.M. acknowledge support from the National Science Foundation Partnerships for Research and Education in Materials (PREM) Center for Intelligent Materials Assembly, Award No. 2122041, for analysis of the reaction conditions.

NOTE: The schematic overview of the microwave synthesis process is presented in Figure 1.
1. Microwave synthesis of &#945;-Ni(OH)2 nanosheets
<ol>
	<li>Preparation of precursor solution
	<ol>
		<li>Prepare the precursor solution by mixing 15 mL of ultrapure water (&#8805;18 M&#937;-cm) and 105 mL of ethylene glycol. Add 5.0 g of Ni(NO3)2&#160;&#183; 6&#160;H2O and 4.1 g of urea to the solution and cove...

Microwave Synthesis and Characterization of Nickel Hydroxide Nanosheets

<ol>
	<li>Liu, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=120+Years+of+nickel-based+cathodes+for+alkaline+batteries.">120 Years of nickel-based cathodes for alkaline batteries.</a> Journal of Alloys and Compounds. 834, 155185 (2020).</li><li>Young, K. H., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fabrications+of+high-capacity+&#945;-Ni(OH)2.">Fabrications of high-capacity &#945;-Ni(OH)2.</a> Batteries. 3, 6 (2017).</li><li>Huang, M., Li, M., Niu, C., Li, Q., Mai, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+advances+in+rational+electrode+designs+for+high-performance+alkaline+rechargeable+batteries.">Recent advances in rational electrode designs for high-performance alkaline rechargeable batteries.</a> Advanced Functional Materials. 29 (11), 1807847 (2019).</li><li>Hall, D. S., Lockwood, D. J., Bock, C., MacDougall, B. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nickel+hydroxides+and+related+materials:+a+review+of+their+structures,+synthesis+and+properties.">Nickel hydroxides and related materials: a review of their structures, synthesis and properties.</a> Proceedings of the Royal Society A. Mathematical, Physical and Engineering Sciences. 471 (2174), 20140792 (2015).</li><li>Miao, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrocatalysis+and+electroanalysis+of+nickel,+its+oxides,+hydroxides+and+oxyhydroxides+toward+small+molecules.">Electrocatalysis and electroanalysis of nickel, its oxides, hydroxides and oxyhydroxides toward small molecules.</a> Biosensors and Bioelectronics. 53, 428-439 (2014).</li><li>Suen, N. T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrocatalysis+for+the+oxygen+evolution+reaction:+recent+development+and+future+perspectives.">Electrocatalysis for the oxygen evolution reaction: recent development and future perspectives.</a> Chemical Society Reviews. 46 (2), 337-365 (2017).</li><li>Diaz-Morales, O., Ledezma-Yanez, I., Koper, M. T., Calle-Vallejo, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Guidelines+for+the+rational+design+of+Ni-based+double+hydroxide+electrocatalysts+for+the+oxygen+evolution+reaction.">Guidelines for the rational design of Ni-based double hydroxide electrocatalysts for the oxygen evolution reaction.</a> ACS Catalysis. 5 (9), 5380-5387 (2015).</li><li>Rossini, P. d. O., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ni-based+double+hydroxides+as+electrocatalysts+in+chemical+sensors:+a+review.">Ni-based double hydroxides as electrocatalysts in chemical sensors: a review.</a> Trends in Analytical Chemistry. 126, 115859 (2020).</li><li>Yu, Z., Bai, Y., Tsekouras, G., Cheng, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Recent+advances+in+Ni-Fe+(Oxy)hydroxide+electrocatalysts+for+the+oxygen+evolution+reaction+in+alkaline+electrolyte+targeting+industrial+applications.">Recent advances in Ni-Fe (Oxy)hydroxide electrocatalysts for the oxygen evolution reaction in alkaline electrolyte targeting industrial applications.</a> Nano Select. 3 (4), 766-791 (2021).</li><li>Othman, M. R., Helwani, Z., Martunus, F. W. J. N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthetic+hydrotalcites+from+different+routes+and+their+application+as+catalysts+and+gas+adsorbents:+a+review.">Synthetic hydrotalcites from different routes and their application as catalysts and gas adsorbents: a review.</a> Applied Organometallic Chemistry. 23 (9), 335-346 (2009).</li><li>Bode, V. H., Dehmelt, K., Witte, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=About+the+nickel+hydroxide+electrode.+II.">About the nickel hydroxide electrode. II.</a> On the oxidation products of nickel(II) hydroxidesZeitschrift f&#252;r Anorganische und Allgemeine Chemie. 366, 1-21 (1969).</li><li>Kimmel, S. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Capacity+and+phase+stability+of+metal-substituted+&#945;-Ni(OH)2+nanosheets+in+aqueous+Ni-Zn+batteries.">Capacity and phase stability of metal-substituted &#945;-Ni(OH)2 nanosheets in aqueous Ni-Zn batteries.</a> Materials Advances. 2 (9), 3060-3074 (2021).</li><li>Corrigan, D. A., Knight, S. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrochemical+and+spectroscopic+evidence+on+the+participation+of+quadrivalent+nickel+in+the+nickel+hydroxide+redox+reaction.">Electrochemical and spectroscopic evidence on the participation of quadrivalent nickel in the nickel hydroxide redox reaction.</a> Journal of the Electrochemical Society. 136 (3), 613-619 (1989).</li><li>Shangguan, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+comparative+study+of+structural+and+electrochemical+properties+of+high-density+aluminum+substituted+&#945;-nickel+hydroxide+containing+different+interlayer+anions.">A comparative study of structural and electrochemical properties of high-density aluminum substituted &#945;-nickel hydroxide containing different interlayer anions.</a> Journal of Power Sources. 282, 158-168 (2015).</li><li>Li, Y. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+interlayer+anions+on+the+electrochemical+performance+of+Al-substituted+&#945;-type+nickel+hydroxide+electrodes.">Effect of interlayer anions on the electrochemical performance of Al-substituted &#945;-type nickel hydroxide electrodes.</a> International Journal of Hydrogen Energy. 35 (6), 2539-2545 (2010).</li><li>Wang, C., Zhang, X., Xu, Z., Sun, X., Ma, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ethylene+glycol+intercalated+cobalt/nickel+layered+double+hydroxide+nanosheet+assemblies+with+ultrahigh+specific+capacitance:+structural+design+and+green+synthesis+for+advanced+electrochemical+storage.">Ethylene glycol intercalated cobalt/nickel layered double hydroxide nanosheet assemblies with ultrahigh specific capacitance: structural design and green synthesis for advanced electrochemical storage.</a> ACS Applied Materials &amp; Interfaces. 7 (35), 19601-19610 (2015).</li><li>Hunter, B. M., Hieringer, W., Winkler, J. R., Gray, H. B., M&#252;ller, A. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+interlayer+anions+on+[NiFe]-LDH+nanosheet+water+oxidation+activity.">Effect of interlayer anions on [NiFe]-LDH nanosheet water oxidation activity.</a> Energy &amp; Environmental Science. 9 (5), 1734-1743 (2016).</li><li>Zhou, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effects+of+redox-active+interlayer+anions+on+the+oxygen+evolution+reactivity+of+NiFe-layered+double+hydroxide+nanosheets.">Effects of redox-active interlayer anions on the oxygen evolution reactivity of NiFe-layered double hydroxide nanosheets.</a> Nano Research. 11, 1358-1368 (2018).</li><li>Cochran, E. A., Woods, K. N., Johnson, D. W., Page, C. J., Boettcher, S. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Unique+chemistries+of+metal-nitrate+precursors+to+form+metal-oxide+thin+films+from+solution:+materials+for+electronic+and+energy+applications.">Unique chemistries of metal-nitrate precursors to form metal-oxide thin films from solution: materials for electronic and energy applications.</a> Journal of Materials Chemistry A. 7 (42), 24124-24149 (2019).</li><li>Bilecka, I., Niederberger, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microwave+chemistry+for+inorganic+nanomaterials+synthesis.">Microwave chemistry for inorganic nanomaterials synthesis.</a> Nanoscale. 2 (8), 1358-1374 (2010).</li><li>Zhang, X., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microwave-assisted+synthesis+of+3D+flowerlike+alpha-Ni(OH)2+nanostructures+for+supercapacitor+application.">Microwave-assisted synthesis of 3D flowerlike alpha-Ni(OH)2 nanostructures for supercapacitor application.</a> Science China Technological Sciences. 58, 1871-1876 (2015).</li><li>Li, J., Wei, M., Chu, W., Wang, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High-stable+&#945;-phase+NiCo+double+hydroxide+microspheres+via+microwave+synthesis+for+supercapacitor+electrode+materials.">High-stable &#945;-phase NiCo double hydroxide microspheres via microwave synthesis for supercapacitor electrode materials.</a> Chemical Engineering Journal. 316, 277-287 (2017).</li><li>Tao, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microwave+synthesis+of+nickel/cobalt+double+hydroxide+ultrathin+flowerclusters+with+three-dimensional+structures+for+high-performance+supercapacitors.">Microwave synthesis of nickel/cobalt double hydroxide ultrathin flowerclusters with three-dimensional structures for high-performance supercapacitors.</a> Electrochimica Acta. 111, 71-79 (2013).</li><li>Zhu, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ultrathin+nickel+hydroxide+and+oxide+nanosheets:+synthesis,+characterizations+and+excellent+supercapacitor+performances.">Ultrathin nickel hydroxide and oxide nanosheets: synthesis, characterizations and excellent supercapacitor performances.</a> Scientific Reports. 4, 1-7 (2014).</li><li>Benito, P., Labajos, F. M., Rives, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microwave-treated+layered+double+hydroxides+containing+Ni+and+Al:+the+effect+of+added+Zn.">Microwave-treated layered double hydroxides containing Ni and Al: the effect of added Zn.</a> Journal of Solid State Chemistry. 179 (12), 3784-3797 (2006).</li><li>Soler-Illia, G. J. d. A., Jobb&#225;gy, M., Regazzoni, A. E., Blesa, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+of+nickel+hydroxide+by+homogeneous+alkalinization.+precipitation+mechanism.">Synthesis of nickel hydroxide by homogeneous alkalinization. precipitation mechanism.</a> Chemistry of Materials. 11 (11), 3140-3146 (1999).</li><li>Xu, L., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=3D+flowerlike+&#945;-nickel+hydroxide+with+enhanced+electrochemical+activity+synthesized+by+microwave-assisted+hydrothermal+method.">3D flowerlike &#945;-nickel hydroxide with enhanced electrochemical activity synthesized by microwave-assisted hydrothermal method.</a> Chemistry of Materials. 20 (1), 308-316 (2008).</li><li>Alshareef, S. F., Alhebshi, N. A., Almashhori, K., Alshaikheid, H. S., Al-Hazmi, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+ten-minute+synthesis+of+alpha-Ni(OH)2+nanoflakes+assisted+by+microwave+on+flexible+stainless-steel+for+energy+storage+devices.">A ten-minute synthesis of alpha-Ni(OH)2 nanoflakes assisted by microwave on flexible stainless-steel for energy storage devices.</a> Nanomaterials. 12 (11), 1911 (2022).</li><li>God&#237;nez-Salom&#243;n, F., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Self-supported+hydrous+iridium-nickel+oxide+two-dimensional+nanoframes+for+high+activity+oxygen+evolution+electrocatalysts.">Self-supported hydrous iridium-nickel oxide two-dimensional nanoframes for high activity oxygen evolution electrocatalysts.</a> ACS Catalysis. 8 (11), 10498-10520 (2018).</li><li>God&#237;nez-Salom&#243;n, F., Albiter, L., Mendoza-Cruz, R., Rhodes, C. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bimetallic+two-dimensional+nanoframes:+high+activity+acidic+bifunctional+oxygen+reduction+and+evolution+electrocatalysts.">Bimetallic two-dimensional nanoframes: high activity acidic bifunctional oxygen reduction and evolution electrocatalysts.</a> ACS Applied Energy Materials. 3 (3), 2404-2421 (2020).</li><li>Ying, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hydrous+cobalt-iridium+oxide+two-dimensional+nanoframes:+insights+into+activity+and+stability+of+bimetallic+acidic+oxygen+evolution+electrocatalysts.">Hydrous cobalt-iridium oxide two-dimensional nanoframes: insights into activity and stability of bimetallic acidic oxygen evolution electrocatalysts.</a> Nanoscale Advances. 3 (7), 1976-1996 (2021).</li><li>Kimmel, S. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structure+and+magnetism+of+iron-substituted+nickel+hydroxide+nanosheets.">Structure and magnetism of iron-substituted nickel hydroxide nanosheets.</a> Magnetochemistry. 9 (1), 25-47 (2023).</li><li>Thommes, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Physisorption+of+gases,+with+special+reference+to+the+evaluation+of+surface+area+and+pore+size+distribution+(IUPAC+Technical+Report).">Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report).</a> Pure and Applied Chemistry. 87 (9-10), 1051-1069 (2015).</li><li>Birkholz, M., Fewster, P. F., Genzel, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Thin Film Analysis by X-ray Scattering. , (2006).</li><li>Hall, D. S., Lockwood, D. J., Poirier, S., Bock, C., MacDougall, B. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Raman+and+infrared+spectroscopy+of+alpha+and+beta+phases+of+thin+nickel+hydroxide+films+electrochemically+formed+on+nickel.">Raman and infrared spectroscopy of alpha and beta phases of thin nickel hydroxide films electrochemically formed on nickel.</a> Journal of Physical Chemistry A. 116 (25), 6771-6784 (2012).</li><li>Choy, J. H., Kwon, Y. M., Han, K. S., Song, S. W., Chang, S. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Intra-+and+inter-layer+structures+of+layered+hydroxy+double+salts,+Ni1-xZn2x(OH)2(CH3CO2)2xnH2O.">Intra- and inter-layer structures of layered hydroxy double salts, Ni1-xZn2x(OH)2(CH3CO2)2xnH2O.</a> Materials Letters. 34 (3-6), 356-363 (1998).</li><li>Momma, K., Izumi, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=VESTA+for+three-dimensional+visualization+of+crystal,+volumetric+and+morphology+data.">VESTA for three-dimensional visualization of crystal, volumetric and morphology data.</a> Journal of Applied Crystallography. 44 (6), 1272-1276 (2011).</li><li>Godinez-Salomon, F., Mendoza-Cruz, R., Arellano-Jimenez, M. J., Jose-Yacaman, M., Rhodes, C. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Metallic+two-dimensional+nanoframes:+unsupported+hierarchical+nickel-platinum+alloy+nanoarchitectures+with+enhanced+electrochemical+oxygen+reduction+activity+and+stability.">Metallic two-dimensional nanoframes: unsupported hierarchical nickel-platinum alloy nanoarchitectures with enhanced electrochemical oxygen reduction activity and stability.</a> ACS Applied Materials &amp; Interfaces. 9 (22), 18660-18674 (2017).</li><li>Shakhashiri, B. Z., Dirreen, G. E., Juergens, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Color,+solubility,+and+complex+ion+equilibria+of+nickel+(II)+species+in+aqueous+solution.">Color, solubility, and complex ion equilibria of nickel (II) species in aqueous solution.</a> Journal of Chemical Education. 57 (12), 900-901 (1980).</li></ol>

The authors have no conflicts of interest.

Microwave synthesis provides a route to generate Ni(OH)2 that is significantly faster (13-30 min reaction time) relative to conventional hydrothermal methods (typical reaction times of 4.5 h)38. Using this mildly acidic microwave synthesis route to produce ultrathin &#945;-Ni(OH)2 nanosheets, it is observed that reaction time and temperature influence the reaction pH, yields, morphology, porosity, and structure of the resulting materials. Using an in situ reaction pr...

Nickel hydroxide, Ni(OH)2, is used for numerous applications including nickel-zinc and nickel-metal hydride batteries1,2,3,4, fuel cells4, water electrolyzers4,5,6,7,8,9, supercapacitors4, photocatalysts4, anion exchangers10, and many other analytical, electrochemical, and sensor applications4,5. Ni(OH)2 has two predominant crystal structures: &#946;-Ni(OH)2 and &#945;-Ni(OH)211. &#946;-Ni(OH)2 adopts a brucite-type Mg(OH)2 crystal structure, while &#945;-Ni(OH)2 is a turbostratically layered form of &#946;-Ni(OH)2 intercalated with residual anions and water molecules from the chemical synthesis4. Within &#945;-Ni(OH)2, the intercalated molecules are not within fixed crystallographic positions but have a degree of orientational freedom, and also function as an interlayer glue stabilizing the Ni(OH)2 layers4,12. The interlayer anions of &#945;-Ni(OH)2 affect the average Ni oxidation state13 and influence the electrochemical performance of &#945;-Ni(OH)2 (relative to &#946;-Ni(OH)2) toward battery2,13,14,15, capacitor16, and water-electrolysis applications17,18.
Ni(OH)2 can be synthesized by chemical precipitation, electrochemical precipitation, sol-gel synthesis, or hydrothermal/solvothermal synthesis4. Chemical precipitation and hydrothermal synthesis routes are widely utilized in the production of Ni(OH)2, and different synthetic conditions alter the morphology, crystal structure, and electrochemical performance. The chemical precipitation of Ni(OH)2 involves adding a highly basic solution to an aqueous nickel (II) salt solution. The phase and crystallinity of the precipitate are determined by the temperature and&#160;identities&#160;and concentrations of the nickel (II) salt and&#160;basic solution used4.
Hydrothermal synthesis of Ni(OH)2 involves heating an aqueous solution of precursor nickel (II) salt in a pressurized reaction vial, allowing the reaction to proceed at higher temperatures than ordinarily allowed under ambient pressure4. Hydrothermal reaction conditions typically favor &#946;-Ni(OH)2, but &#945;-Ni(OH)2 can be synthesized by (i) using an intercalation agent, (ii) using a non-aqueous solution (solvothermal synthesis), (iii) lowering the reaction temperature, or (iv) including urea in the reaction, resulting in ammonia-intercalated &#945;-Ni(OH)24. The hydrothermal synthesis of Ni(OH)2 from nickel salts occurs via a two-step process that involves a hydrolysis reaction (equation 1) followed by an olation condensation reaction (equation 2).19
[Ni(H2O)N]2+ + hH2O &#8596; [Ni(OH)h(H2O) N-h](2-h)++ hH3O+ (1)
Ni-OH + Ni-OH2 Ni-OH-Ni + H2O (2)
Microwave chemistry has been used for the one-pot synthesis of a wide variety of nanostructured materials and is based on the ability of a specific molecule or material to convert microwave energy into heat20. In conventional hydrothermal reactions, the reaction is initiated by the direct absorption of heat through the reactor. In contrast, within microwave-assisted hydrothermal reactions, the heating mechanisms are dipolar polarization of the solvent oscillating in a microwave field and ionic conduction generating localized molecular friction20. Microwave chemistry can increase the reaction kinetics, selectivity, and yield of chemical reactions20, making it of significant interest for a scalable, industrially viable method to synthesize Ni(OH)2.
For alkaline battery cathodes, the &#945;-Ni(OH)2 phase provides improved electrochemical capacity compared with the &#946;-Ni(OH)2 phase13, and synthetic methods to synthesize &#945;-Ni(OH)2 are of particular interest. &#945;-Ni(OH)2 has been synthesized by a variety of microwave-assisted methods, which include microwave-assisted reflux21,22, microwave-assisted hydrothermal techniques23,24, and microwave-assisted base-catalyzed precipitation25. The inclusion of urea within the reaction solution significantly influences the reaction yield26, mechanism26,27, morphology, and crystal structure27. The microwave-assisted decomposition of urea was determined to be a critical component for obtaining &#945;-Ni(OH)227. Water content in an ethylene glycol-water solution has been shown to impact the morphology of microwave-assisted synthesis of &#945;-Ni(OH)2 nanosheets24. The reaction yield of &#945;-Ni(OH)2, when synthesized by a microwave-assisted hydrothermal route using an aqueous nickel nitrate and urea solution, was found to depend on the solution pH26. A prior study of microwave synthesized &#945;-Ni(OH)2 nanoflowers using a precursor solution of EtOH/H2O, nickel nitrate, and urea found that temperature (in the range of 80-120 &#176;C) was not a critical factor, provided the reaction is conducted above the urea hydrolysis temperature (60 &#176;C)27. A recent paper that studied the microwave synthesis of Ni(OH)2 using a precursor solution of nickel acetate tetrahydrate, urea, and water found that at a temperature of 150 &#176;C, the material contained both &#945;-Ni(OH)2 and &#946;-Ni(OH)2 phases, which indicates that temperature can be a critical parameter in the synthesis of Ni(OH)228.
Microwave-assisted hydrothermal synthesis can be used to produce high-surface area &#945;-Ni(OH)2 and &#945;-Co(OH)2 by using a precursor solution composed of metal nitrates and urea dissolved in an ethylene glycol/H2O solution12,29,30,31. Metal-substituted &#945;-Ni(OH)2 cathode materials for alkaline Ni-Zn batteries were synthesized using a scaled-up synthesis designed for a large-format microwave reactor12. Microwave-synthesized &#945;-Ni(OH)2 was also used as a precursor for obtaining &#946;-Ni(OH)2 nanosheets12, nickel-iridium nanoframes for oxygen evolution reaction (OER) electrocatalysts29, and bifunctional oxygen electrocatalysts for fuel cells and water electrolyzers30. This microwave reaction route has also been modified to synthesize Co(OH)2 as a precursor for cobalt-iridium nanoframes for acidic OER electrocatalysts31 and bifunctional electrocatalysts30. Microwave-assisted synthesis was also used to produce Fe-substituted &#945;-Ni(OH)2 nanosheets, and the Fe substitution ratio alters the structure and magnetization32. However, a step-by-step procedure for microwave synthesis of &#945;-Ni(OH)2 and the evaluation of how varying reaction time and temperature within a water-ethylene glycol solution affects the crystalline structure, surface area, and porosity, and local environment of interlayer anions within the material&#160;has not been previously reported.
This protocol establishes procedures for high-throughput microwave synthesis of &#945;-Ni(OH)2 nanosheets using a rapid and scalable technique. The effect of reaction temperature and time were varied and evaluated using in situ reaction monitoring, scanning electron microscopy, energy dispersive X-ray spectroscopy, nitrogen porosimetry, powder X-ray diffraction (XRD), and Fourier transform infrared spectroscopy to understand the effects of synthetic variables on reaction yield, morphology, crystal structure, pore size, and local coordination environment of &#945;-Ni(OH)2 nanosheets.

<table border="1" fo:keep-together.within-page="1" fo:keep-with-next.within-page="always">
	<tbody>
		<tr>
			<td>ATR-FTIR</td>
			<td>Bruker</td>
			<td></td>
			<td>Tensor II FT-IR spectrometer equipped with a Harrick Scientific SplitPea ATR micro-sampling accessory</td>
		</tr>
		<tr>
			<td>Bath sonicator</td>
			<td>Fisher Scientific</td>
			<td>15-337-409</td>
			<td>--</td>
		</tr>
		<tr>
			<td>Ethanol&#160;</td>
			<td>VWR analytical</td>
			<td>AC61509-0040</td>
			<td>200 proof</td>
		</tr>
		<tr>
			<td>Ethylene Glycol</td>
			<td>VWR analytical</td>
			<td>BDH1125-4LP</td>
			<td>99% purity</td>
		</tr>
		<tr>
			<td>Falcon Centrifuge tubes</td>
			<td>VWR analytical</td>
			<td>21008-940</td>
			<td>50 mL</td>
		</tr>
		<tr>
			<td>KimWipes</td>
			<td>VWR analytical</td>
			<td>21905-026</td>
			<td>--</td>
		</tr>
		<tr>
			<td>Lab Quest 2</td>
			<td>Vernier&#160;</td>
			<td>LABQ2</td>
			<td>--</td>
		</tr>
		<tr>
			<td>Microwave Reactor</td>
			<td>Anton Parr</td>
			<td>165741</td>
			<td>Monowave 450</td>
		</tr>
		<tr>
			<td>Ni(NO3)2 &#183; 6 H2O</td>
			<td>Ward&#39;s Science</td>
			<td>470301-856</td>
			<td>Research lab grade</td>
		</tr>
		<tr>
			<td>pH Probe</td>
			<td>Vernier&#160;</td>
			<td>PH-BTA</td>
			<td>Calibrated vs standard pH solutions (pH= 4, 7, 11)</td>
		</tr>
		<tr>
			<td>Porosemeter</td>
			<td>Micromeritics&#160;</td>
			<td>--</td>
			<td>ASAP 2020. Analysis software: Micromeritics, version 4.03</td>
		</tr>
		<tr>
			<td>Powder x-ray diffactometer</td>
			<td>Bruker</td>
			<td></td>
			<td>AXS Advanced Poweder x-ray diffractometer; d-spacing, and crystallite size analyses were performed using Highscore XRD software, and crystal structures were created using VESTA 3 software.</td>
		</tr>
		<tr>
			<td>Reaction vial</td>
			<td>Anton Parr</td>
			<td>82723</td>
			<td>30 mL G30 wideneck, 20 mL max fill capacity</td>
		</tr>
		<tr>
			<td>Reaction vial locking lid</td>
			<td>Anton Parr</td>
			<td>161724</td>
			<td>G30 Snap Cap</td>
		</tr>
		<tr>
			<td>Reaction vial PTFE septum</td>
			<td>Anton Parr</td>
			<td>161728</td>
			<td>Wideneck</td>
		</tr>
		<tr>
			<td>Scanning electron microscope</td>
			<td>FEI</td>
			<td>--</td>
			<td>Helios Nanolab 400</td>
		</tr>
		<tr>
			<td>Urea</td>
			<td>VWR analytical</td>
			<td>BDH4602-500G</td>
			<td>ACS grade</td>
		</tr>
	</tbody>
</table>

effect of microwave synthesis conditions on the structure of nickel hydroxide nanosheets

A protocol for rapid, microwave-assisted hydrothermal synthesis of nickel hydroxide nanosheets under mildly acidic conditions is presented, and the effect of reaction temperature and time on the material&#39;s structure is examined. All reaction conditions studied result in aggregates of layered &#945;-Ni(OH)2 nanosheets. The reaction temperature and time strongly influence the structure of the material and product yield. Synthesizing &#945;-Ni(OH)2 at higher temperatures increases the reaction yield, lowers the interlayer spacing, increases crystalline domain size, shifts the frequencies of interlayer anion vibrational modes, and lowers the pore diameter. Longer reaction times increase reaction yields and result in similar crystalline domain sizes. Monitoring the reaction pressure in situ shows that higher pressures are obtained at higher reaction temperatures. This microwave-assisted synthesis route provides a rapid, high-throughput, scalable process that can be applied to the synthesis and production of a variety of transition metal hydroxides used for numerous energy storage, catalysis, sensor, and other applications.

Author Spotlight: A Rapid, Microwave-Assisted Hydrothermal Synthesis Of Nickel Hydroxide Nanosheets 

Effect of Microwave Synthesis Conditions on the Structure of Nickel Hydroxide Nanosheets

Influence of reaction temperature and time on the synthesis of &#945;-Ni(OH)2 
Before the reaction, the precursor solution [Ni(NO3)2 &#183; 6 H2O, urea, ethylene glycol, and water] is a transparent green color with a pH of 4.41 &#177; 0.10 (Figure 2A and Table 1). The temperature of the microwave reaction (either 120 &#176;C or 180 &#176;C) influences the in situ reaction pressure and color of the sol...

Watch this Scientific Journal Video about A Rapid, Microwave-Assisted Hydrothermal Synthesis Of Nickel Hydroxide Nanosheets at JoVE.com

Nickel hydroxide nanosheets are synthesized by a microwave-assisted hydrothermal reaction. This protocol demonstrates that the reaction temperature and time used for microwave synthesis affects the reaction yield, crystal structure, and local coordination environment.

A protocol for rapid, microwave-assisted hydrothermal synthesis of nickel hydroxide nanosheets under mildly acidic conditions is presented, and the effect ...

effect-microwave-synthesis-conditions-on-structure-nickel-hydroxide

Research

JoVE Journal

Chemistry

Microwave-Assisted Synthesis of &#945;-Ni(OH)2 Nanosheets

Microwave-Assisted Synthesis of &#945;-Ni(OH)2 Nanosheets  

Begin preparing the precursor solution by mixing 105 milliliters of ethylene glycol and 15 milliliters of ultrapure water. Then add 4.1 grams of uria and add 5.0 grams of nickel nitrate hexahydrate, and cover the solution. Sonicate the precursor solution for 30 minutes in a bath sonicator filled with ice and water at 40 kilohertz frequency and full power without pulse.Transfer 20 milliliters of the sonic precursor solution into a microwave reaction vial fitted with a PTFE stir bar. Seal the reaction vessel using a locking lid with a PTFE liner. Place the vial inside the microwave reactor and set the reactor program to as fast as possible, which applies maximum power until the desired temperature is achieved.Thereafter, apply variable power to maintain the reaction temperature for 13 to 30 minutes. Upon completion of the reaction, vent the reaction chamber with compressed air until the solution temperature reaches 55 degrees Celsius. Transfer the post reaction solution to 50 milliliter centrifuge tubes.Centrifuge the tubes at room temperature for four minutes, and decant the supernatant. Resuspend the resulting nickel hydroxide nano sheets in 25 milliliters of ultrapure water and centrifuge once more as demonstrated previously. After decanting the supernatant, cover the centrifuge tubes with a tissue or paper towel serving as a porous cover to minimize potential contamination.Finally, dry the nano sheets under an ambient atmosphere in a sample oven at 70 degrees Celsius for 21 hours. At 120 degrees Celsius, the maximum reaction pressure generated was nine to 11.5 pounds per square inch or PSI. Whereas at 180 degrees Celsius, it increased to 138 PSI.Increasing the reaction temperature from 120 to 180 degrees Celsius also changed the post-reaction supernatant color from green to blue. In C2 photographs of the reaction at 180 degrees Celsius showed a murky green color when the reaction terminated, but it changed to murky blue as the reaction cooled. After centrifugation, washing, and drying, all the reactions, irrespective of time and temperature, produced a green powder.The pH of the supernatant of the 180 degree Celsius reaction was much higher relative to the 120 degree Celsius reaction supernatants. The 180 degree Celsius reaction also recorded a much higher yield than the reactions at 120 degrees Celsius.

Characterization and Analysis of &#945;-Ni(OH)2 Nanosheets

Characterization and Analysis of &#945;-Ni(OH)2 Nanosheets  

To characterize the morphology and composition of the microwave synthesized nickel hydroxide nanosheets by SEM and EDS, prepare the sample by suspending a small amount of nickel hydroxide powder in one milliliter of ethanol using a water bath sonicator. Then drop cast the nickel hydroxide and ethanol mixture on an SEM stub and evaporate the ethanol by heating the stub in a sample oven at 70 degrees Celsius before collecting the SEM micrographs and EDS spectra. In order to determine the surface area and porosity of the nanosheets, add 25 milligrams of nickel hydroxide nanosheets into the sample tube.Carry out a pre-analysis degassing and drying procedure under vacuum at 120 degrees Celsius for 16 hours. Lastly, transfer the sample tube from the degassing port to the analysis port to collect nitrogen isotherms. For structural analysis using X-ray diffraction or XRD, fill the sample well of a zero-background powder XRD holder with nickel hydroxide.Collect powder X-ray diffractograms using a copper K-alpha radiation source between a 2-theta of 2 to 80 degrees with a 0.01 step increment. Equip the attenuated total reflectance or ATR attachment to the Fourier Transform Infrared or FTIR spectrometer. Press a small amount of nickel hydroxide powder between two glass slides to create a pellet.Then place the nickel hydroxide pellet on the silicon ATR crystal and obtain an FTIR spectrum between 404, 000 reciprocal centimeters as an average of 16 individual scans with a resolution of four reciprocal centimeters. SEM revealed that the microwave synthesized nickel hydroxide was composed of randomly interwoven ultra thin nanosheet aggregates. However, increasing the reaction temperature from 120 to 180 degrees Celsius increased the lateral sheet dimensions of individual nanosheets in the aggregates.Also, increasing the reaction time from 13 to 30 minutes at 120 degrees Celsius increased the nucleated aggregate sizes from about three to five microns. EDS showed a uniform distribution of nickel, oxygen, carbon, and nitrogen within all the synthesized nanosheets. The nanosheets had BET surface areas ranging from 61 to 85 square meters per gram, average pore diameter of 21 to 35 angstroms, and cumulative poor volumes of 0.4 to 0.6 cubic centimeters per gram.The XRD patterns of all three microwave synthesized samples showed characteristic peaks of alpha nickel hydroxide. However, reaction time and temperature affected the peaks as demonstrated by the shifting of the 001 plane. The ATR-FTIR spectra of the microwave synthesized nanosheets showed characteristic nickel oxide lattice mode.Modes from the ligands and structural molecules, cyanate bands and alpha hydroxide lattice modes. Increasing the reaction temperature from 120 to 180 degrees Celsius altered the frequencies and relative intensities of the cyanate, nitrate, hydroxyl, and water vibrational modes.

961 Views.  Texas State University.  Nickel hydroxide nanosheets are synthesized by a microwave-assisted hydrothermal reaction. This protocol demonstrates that the reaction temperature and time used for microwave synthesis affects the reaction yield, crystal structure, and local coordination environment.

Microwave Synthesis and Characterization of Nickel Hydroxide Nanosheets

Summary