The video provides a step-by-step guide on preparing a TCPP solution, detailing the precise weighing of TCPP, the addition of purified water and isopropanol, the incorporation of sodium bicarbonate, and the importance of protecting the mixture from light and evaporation during the stirring and storage process.

preparation of meso-tetra(4-carboxyphenyl) porphine (tcpp) stock solution

Grânulos modificados com porfirina em citometria de fluxo

Porphyrins have been of interest for many years in the biomedical field owing to their fluorescence and tumor-targeting properties1,2,3. Therapeutic applications such as photodynamic therapy (PDT) and sonodynamic therapy (SDT) entail the systemic administration of a porphyrin to a cancer patient, the accumulation of the drug in the tumor, and the localized exposure of the tumor to a laser light of a specific wavelength or ultrasound. The exposure to laser light or ultrasound leads to the generation of reactive oxygen species by the porphyrin and subsequent cell death4,5. In photodynamic diagnosis (PDD), porphyrin fluorescence is used to distinguish cancer cells from normal cells6. In this context, protoporphyrin IX, a natural fluorescent porphyrin that accumulates in tumors upon the systemic or local injection of its precursor, 5-aminolevulinic acid (5-ALA), is used to identify gastrointestinal stromal tumors, bladder cancer, and brain cancer7,8. More recently, 5-ALA treatment was explored as an approach to detect minimal residual disease in multiple myeloma9. Our laboratory has been using the tetraaryl porphyrin TCPP (5,10,15,20-tetrakis-(4-carboxyphenyl)-21,23H-porphine) for its ability to selectively stain lung cancer cells and cancer-associated cells in human sputum samples, which is a property that has been exploited in slide-based and flow cytometric diagnostic assays10.
Some porphyrins are bifunctional in that they can be used as therapeutic and diagnostic agents2,11. In biomedical research, such bifunctional porphyrins are used to evaluate how their ability to selectively target and kill cancer cells is a function of their structure as well as how it is affected by the presence of other compounds12,13,14,15,16. Both the cellular uptake of porphyrins and their cytotoxicity can be measured on a flow cytometric platform in a high-throughput manner. The absorption and emission spectra of fluorescent porphyrins are complex, but most flow cytometric platforms are equipped to correctly identify them. The absorption spectrum of fluorescent porphyrins is characterized by a strong absorption band in the 380-500 nm range, known as the Soret band. Two to four weaker absorption bands are generally observed in the 500-750 nm range (Q bands)17. A blue&#160;488 nm laser, present in most flow cytometers, or a violet laser (405 nm) can generate light of the appropriate wavelength to excite porphyrins. The emission spectra of porphyrins typically display peaks in the 600-800 nm range18, which results in very little spectral overlap with fluorescein isothiocyanate or phycoerythrin (PE) fluorophores but considerable overlap with other often-used fluorophores, such as allophycocyanin (APC), as well as tandem fluorophores, such as PE-Cy5 and others. Therefore, when using porphyrins in multi-color flow cytometry assays, single-fluorophore controls are essential to adequately correct the spillover of fluorescence in channels other than the one designated to measure the porphyrin&#39;s fluorescence.
Ideally, the single-fluorophore controls used to calculate the spillover matrix for a panel of fluorophores (also called &#34;compensation controls&#34;) should consist of the same cell type(s) as the sample. However, using the sample for this purpose is not optimal if there is very little sample to begin with or if the target population within the sample is very small&#160;(for example, if one wants to look at minimal residual disease or cancer cells at the early stages of the disease). A useful alternative to cells is beads coupled with the same fluorophore that is used to analyze the sample. Many such beads are commercially available; these beads are either prelabeled with the desired fluorophore (prelabeled fluorophore-specific beads)19,20, or a fluorescently labeled antibody can be attached to them (antibody capture beads)20,21. While commercial compensation beads are available for many fluorophores, such beads are unavailable for porphyrins, despite their increasing use in basic and clinical research.
In addition to sample preservation and appropriately sized positive versus negative populations, the other advantages of using beads as compensation controls are the ease of preparation, low background fluorescence, and excellent stability over time22. The potential disadvantage of using beads as a compensation control is that the emission spectrum of the fluorescent antibody captured on beads may differ from that of the same antibody used to label the cells. This may be of specific importance when using a spectral flow cytometer20. Therefore, the development of beads as a compensation control needs to be performed on the flow cytometer that will be used for the assay for which the beads are developed. Moreover, the development of the beads needs to include a comparison with cells labeled with the same fluorescent staining reagent.
Here, we describe the preparation of TCPP amine-functionalized polystyrene compensation beads, whose median fluorescence intensity in the detection channel was comparable to that of TCPP-labeled cells in sputum, and their use as compensation controls for flow cytometry. The autofluorescence of equivalent, non-functionalized beads was sufficiently low for their use as negative fluorescence compensation controls. In addition, these beads demonstrated stability in storage for nearly 1 year.

Autor em destaque: grânulos modificados por porfirina para uso como controles de compensação em citometria de fluxo  

Pérolas Modificadas com Porfirina para Uso como Controle de Compensação em Citometria de Fluxo

We developed polystyrene beads modified with the porphyrin TCPP as compensation controls and multicolor flow cytometry. The beads used in this protocol have fluorescence intensity comparable to TCPP stain cells and still passed through the flow cytometer. We accomplished that and are currently working on better methods to remove the particulate byproduct.Porphyrin-modified compensation beads were preferable to TCPP stained cells as compensation controls. These speeds were stable over months without significant loss of fluorescence. Porphyrins are known to stain cancer cells selectively.The research combines the selectivity of porphyrins with quantitative flow cytometry as a powerful platform for high-throughput analysis of human samples.

Watch this Scientific Journal Video about Preparation of Meso-Tetra4-Carboxyphenyl Porphine TCPP Stock Solution at JoVE.com

Preparation of Meso-Tetra(4-Carboxyphenyl) Porphine (TCPP) Stock Solution  

Preparação da solução-mãe de meso-tetra(4-carboxifenil) porfina (TCPP)

Para começar, pese de 49,0 a 50,9 miligramas de TCPP usando uma balança analítica. Arredondar o peso para 1/10 de miligrama. Deixe de lado a quantidade medida de TCPP, protegida da luz.Com base na quantidade de TCPP, adicione as quantidades necessárias de água purificada e isopropanol a um copo de vidro de 100 mililitros e cubra-o com parafilme para protegê-lo da evaporação. Em seguida, pese a quantidade necessária de bicarbonato de sódio com base na quantidade de TCPP e adicione-a ao copo de 100 mililitros contendo água purificada e isopropanol. Cubra a solução com parafilme para protegê-la da evaporação e coloque-a em uma placa agitada por aproximadamente 10 minutos.Uma vez dissolvido o conteúdo, certifique-se de que o pH da solução está entre nove e 10. Em seguida, adicione cuidadosamente o TCPP pesado, proteja a solução da luz e mexa-a por aproximadamente 30 minutos até dissolver. Conservar a solução num recipiente de polipropileno à temperatura ambiente protegido da luz.

preparation-of-meso-tetra4-carboxyphenyl-porphine-tcpp-stock-solution

Research

JoVE Journal

Chemistry

Preparation of Meso-Tetra(4-Carboxyphenyl) Porphine (TCPP) Stock Solution

118 visualizações.  bioAffinity Technologies. Para começar, pese de 49,0 a 50,9 miligramas de TCPP usando uma balança analítica. Arredondar o peso para 1/10 de miligrama. Deixe de lado a quantidade medida de TCPP, protegida da luz.Com base na quantidade de TCPP, adicione as quantidades necessárias de água purificada e isopropanol a um copo de vidro de 100 mililitros e cubra-o com parafilme para protegê-lo da evaporação. Em seguida, pese a quantidade necessária de bicarbonato de sódio com base na quantidade de TCPP e adic...

Vídeo: Preparation of Meso-Tetra(4-Carboxyphenyl) Porphine (TCPP) Stock Solution  

Porphyrin-Modified Beads for Use as Compensation Controls in Flow Cytometry

Flow cytometry can rapidly characterize and quantify diverse cell populations based on fluorescence measurements. The cells are first stained with one or more fluorescent reagents, each functionalized with a different fluorescent molecule (fluorophore) that binds to cells selectively based on their phenotypic characteristics, such as cell surface antigen expression. The intensity of fluorescence from each reagent bound to cells can be measured on the flow cytometer using channels that detect a specified range of wavelengths. When multiple fluorophores are used, the light from individual fluorophores often spills over into undesired detection channels, which requires a correction to the fluorescence intensity data in a process called compensation. 
Compensation control particles, typically polymer beads bound to a single fluorophore, are needed for each fluorophore used in a cell labeling experiment. Data from compensation particles from the flow cytometer are used to apply a correction to the fluorescence intensity measurements. This protocol describes the preparation and purification of polystyrene compensation beads covalently functionalized with the fluorescent reagent meso-tetra(4-carboxyphenyl) porphine (TCPP) and their application in flow cytometry compensation. In this work, amine-functionalized polystyrene beads were treated with TCPP and the amide coupling reagent EDC (N-(3-dimethylaminopropyl)-N&#8242;-ethylcarbodiimide hydrochloride) at pH 6 and at room temperature for 16 h with agitation. The TCPP beads were isolated by centrifugation and resuspended in a pH 7 buffer for storage. TCPP-related particulates were observed as a byproduct. The number of these particulates could be reduced using an optional filtration protocol. The resultant TCPP beads were successfully used on a flow cytometer for compensation in experiments with human sputum cells labeled with multiple fluorophores. The TCPP beads proved stable following storage in a refrigerator for 300 days.

The protocol describes how porphyrin-based compensation beads for flow cytometry are prepared by the reaction of amine-functionalized polystyrene beads with the porphyrin TCPP and the amide coupling reagent EDC. A filtration procedure is used to reduce the particulate byproducts.

Flow cytometry can rapidly characterize and quantify diverse cell populations based on fluorescence measurements. The cells are first stained with one or ...

Química

To begin, weigh 49.0 to 50.9 milligrams of TCPP using an analytical balance. Round the weight to 1/10 of a milligram. Set the measured amount of TCPP aside, protected from light.Based on the amount of TCPP, add the required amounts of purified water and isopropanol to a 100 milliliter glass beaker and cover it with parafilm to protect it from evaporation. Next, weigh the required amount of sodium bicarbonate based on the amount of TCPP and add it to the 100 milliliter beaker containing purified water and isopropanol. Cover the solution with parafilm to protect it from evaporation, and place it on a stir plate for approximately 10 minutes.Once the contents are dissolved, ensure that the pH of the solution is between nine and 10. Next, carefully add the weighted TCPP, protect the solution from light, and stir it for approximately 30 minutes until dissolved. Store the solution in a polypropylene container at room temperature protected from light.

Combining Amine-Functionalized Polystyrene Beads with TCPP Solution

Begin by adding 4.3 milliliters of 0.1 molar MES buffer solution to a 15 milliliter polypropylene tube. Then add 288 microliters of the vortexed amine functionalized polystyrene bead suspension to the 15 milliliter polypropylene tube containing MES buffer. Vortex the MES bead solution for 15 seconds at maximum speed.Next, vortex the one milligram per milliliter TCPP solution for 60 seconds at maximum speed. Then add 1.2 milliliters of this solution to the MES bead suspension. After vortexing the resultant suspension for 15 seconds, cover the tube with foil.

Combinando esferas de poliestireno funcionalizadas com amina com solução TCPP

Labeling Amine-Functionalized Polystyrene Beads with TCPP

To begin, add freshly prepared 4.5 milliliters of EDC working solution to a 15 milliliter polypropylene tube containing the amine-functionalized polystyrene beads and TCPP in MES buffer. Place the tube in an inverting rotator at 35 RPM for 16 hours at room temperature protected from light. Then, centrifuge it for 10 minutes.Aspirate the supernatant and re-suspend the beads in 0.8 milliliters of Hank's Balanced Salt Solution. Then, using a one milliliter pipette, transfer the bead solution to an amber polypropylene vial and store it at four degrees Celsius. The relationship between the particulate formation, the median, fluorescence intensity or MFI, and the bead TCPP/EDC ratio showed that with increasing ratios, the MFI increased until it formed a plateau.The particulates appeared only when EDC was used as a coupling reagent during the labeling procedure. Labeling the beads with TCPP alone resulted in much lower fluorescence intensity. When TCPP-labeled beads were tested after 300 days, no significant change in the MFI or in the particulate content was observed.The coupling of TCPP to the beads had a minimum effect on its fluorescence emission spectrum. However, its spectrum differed more from TCPP-labeled A549 lung cancer cells. In a multi-flora four labeled sputum sample, the TCPP-labeled beads worked equally well as the TCPP-stained A549 cells.

Marcação de esferas de poliestireno funcionalizado com amina com TCPP

Quality Check (QC) of the TCPP Beads by Flow Cytometry

Begin the quality check of the beads labeled as meso-tetra 4-carboxyphenyl porphine or TCPP beads in the flow cytometer by running and collecting 10, 000 events of the rainbow beads. Then perform a rinse with water and collect 10, 000 events of the TCPP negative beads. After rinsing with water again, collect 10, 000 events of the TCPP positive beads.Then perform a one minute water rinse before appropriate cleaning and shut down the flow cytometer. A representative outcome of the TCPP bead labeling process determined by flow cytometry is shown here with a standardized profile of rainbow beads. These beads serve as quality checks for standardizing the laser voltages to detect TCPP.The light scatter profile of amine functionalized polystyrene TCPP labeled beads was observed. The light scatter profile of non-functionalized beads was used as a negative bead control to calculate the compensation matrix. The population indicated by the red rectangle in the TCPP labeled beads was absent in the unlabeled bead suspension representing that the TCPP related particulates were not formed in the absence of TCPP and EDC.The fluorescence intensity of the labeled beads selected by the black gate was several logs higher than that of the unlabeled beads.

Verificação da qualidade (QC) das esferas TCPP por citometria de fluxo

TCPP Bead Filtration

Begin the TCPP bead filtration by diluting 0.8 milliliters of the TCPP bead suspension with 3.20 milliliters of ice-cold Hanks'Balanced Salt Solution, or HBSS. Vortex the diluted bead suspension at maximum speed for 15 seconds. Then, remove the plunger from a disposable five-milliliter syringe and fit the syringe with a five-micrometer glass fiber tip filter having a 13-millimeter diameter.Next, add four milliliters of HBSS to the syringe before adding 0.5 milliliters of the vortexed diluted bead suspension. Using the plunger, filter the bead suspension through the syringe filter at approximately two drops per second. Then, wash the beads by drawing five milliliters of fresh HBSS into the syringe through the filter and pushing the HBSS out into the waste container at approximately two drops per second.To remove the beads from the filter, draw another five milliliters of fresh HBSS into the syringe through the filter. Then, remove the filter carefully from the syringe. After ejecting the bead suspension from the syringe into a 50-milliliter conical centrifuge tube, place the fresh filter back on the syringe and repeat the five-milliliter HBSS wash four times.Once done, discard the filter and syringe. Centrifuge the filtered bead suspensions at room temperature for 10 minutes at 1, 000g. Aspirate the supernatant from each 50-milliliter tube.Gently resuspend the beads and 0.5 milliliters of fresh HBSS. Transfer the combined beads with a P1000 micropipette to a new amber-colored glass vial, and store at four degrees Celsius. The filtration effect on a bead suspension comprising approximately 66%particulates is seen here.After filtration, the particulate content decreased to approximately 25%The adverse effects of filtration are the loss of beads and a slight loss in fluorescence intensity.