Name: imaging protein-protein interactions in vivo
Uploaded: 2010-10-10T17:00:00
Duration: 11 min 15 s
Description: Watch this Scientific Journal Video about Imaging Protein-protein Interactions in vivo at JoVE.com

We wish to acknowledge Dr Scott Henderson for help with confocal microscopy. This research was supported by grants from the National Institutes of Health 1RO1CA127501 to W.A.B as well as pilot project funding from the Massey Cancer Center and
School of Medicine (VCU) to W.A.B. Microscopy was performed at the VCU-Dept. of Neurobiology &amp; Anatomy Microscopy Facility, supported, in part, with funding from NIHNINDS Center core grant 5P30NS047463.

The protocol consists of three major steps. The first, step cloning of your gene of interest into a mammalian expression vector amino-terminally to the monomeric versions of CFP and/or YFP will only be discussed briefly. The second and third steps; transfection of vector DNA into EA.hy926 endothelial cells, and confocal imaging with FRET, are outlined in more depth below.
1. Construction of CFP and YFP Chimeric Receptors
Receptors of interest should be cloned amino-terminally to monomeric enhanced versions of CFP and YFP. Determination of FRET is empirical and is critically dependent upon the length of linker between the transmembrane spanning region and start of the fluorophore1. Therefore, several different lengths of linker must be explored for each new receptor pair under investigation.
<ol>
<li> Into the pcDNA3.1 hygroR or neoR vector containing monomeric C- or YFP (this vector can be obtained from our lab), clone your receptor of interest into the NheI/EcoRI sites. *Note-If necessary, NheI is compatible several other enzymes including SpeI and XbaI.</li>
<li> Transform your ligation reaction into an appropriate endA1 recA competent cell line (we routinely use Mach1). Screen colonies for the presence of insert followed by DNA sequencing to verify the absence of mutations.</li>
<li> Upon obtaining conformation of successful molecular cloning, prepare transfection-grade vector DNA in sterilized water or TE using Qiagen, or similar, DNA kits. Evaluate concentration and purity using UV spectroscopy. Typical yields of DNA should be in the range of 100-200 &mu;g, which is routinely diluted to a working stock of 1 &mu;g/&mu;L.</li>
</ol>
2. Transfection of EA.hy 926 Cells
<ol>
<li> Split EA.hy 926 cells4, grown in complete-DMEM (DMEM+10% Fetal bovine serum+Pen./Strep.) into MatTek coverslip (No. 0) 35 mm dishes with 2 mL medium. You can conservatively obtain ~15 dishes (~90% confluent the following day) from a 15 cm confluent dish. Prepare one dish to evaluate expression of each individual receptor, as well as one dish for each receptor pair.</li>
<li> Allow the cells to incubate overnight in 5%CO2 atmosphere at 37&deg;C. The following day, the cultures should be ~ 70-90% confluent.</li>
<li> On the day of transfection, prepare the nucleolipid complexes by mixing 2 &mu;g of the chimeric receptor vector DNA (2 &mu;L) with 8 &mu;L of Fugene6 in 200 &mu;L of pre-warmed OptiMEM. For receptor pairs, transfect with 1 &mu;g of each receptor, for a total of 2 &mu;g (See also discussion below).</li>
<li> Mix gently by inversion.</li>
<li> Continue to incubate at room temperature for 30 minutes.</li>
<li> During the incubation period, prepare the cells for transfection. Aspirate off fresh media and wash each plate gently and briefly with warm PBS before the addition of 2 mL pre-warmed complete-DMEM without antibiotics (DMEM+FBS). It is important to avoid the presence of Penicillin and Streptomycin, as they are considerably more toxic to cells during treatment with Fugene6.</li>
<li> Add the complex drop wise to cells and incubate for an additional 20-24 hours at 37&deg;C in a 5% CO2 atmosphere.</li>
<li> After 24 hours, carefully aspirate the media from the cells and pipette fresh complete-DMEM with antibiotics. Following transfection, cell viability should remain relatively high, i.e. little to no floating cells should be observed.</li>
<li> Gene expression is typically maximal after an additional 48-60 hours post-transfection. However, imaging is typically feasible in as short as 24 hours. Time course experiments for optimal gene expression should be performed.</li>
</ol>
3. Confocal Imaging and FRET Analysis
Live cell imaging is performed on a Leica TCS-SP2 AOBS confocal laser scanning microscope equipped with blue diode (405 nm), Argon (458, 476, 488, 514 nm). green HeNe (543 nm), orange HeNe (594 nm), and red HeNe (633 nm) lasers, an HCX PI Apo 63x/1.3 n.a. glycerin-immersion objective lens, a motorized XY stage (M&auml;rzh&auml;user), and an environmentally controlled (temperature, humidity, and CO2) stage incubator (PeCon). Experimental controls are critical to eliminate fluorophore cross-talk between the emission channels as well as to evaluate expression issues and non-specific fluorophore multimerization. As such, single fluorophore transfections are utilized for setting up every image session. Negative FRET controls (using known noninteracting receptors) will need to be performed, in order to determine the background FRET that occurs due to over expression.
<ol>
<li> To eliminate crosstalk between the emission channels for CFP and YFP, place the CFP expression control into the stage incubator. Using white light, adjust the Z-plate to focus on to the cells.</li>
<li> Set SP window settings for emission detection of CFP to 465-505 nm and YFP to 525-600 nm.</li>
<li> While monitoring both emission channels, excite the CFP at 458 nm. Using the AOTF, set the laser power to eliminate appreciable bleed over of CFP into the YFP emission channel. Save this setting.</li>
<li> Perform the same control for YFP crosstalk (using the YFP expression control) in the CFP channel by adjusting the excitation power at 514 nm for cells expressing only YFP. Save this setting.</li>
<li> Next place cells co-expressing CFP and YFP into the stage incubator. Using the sequence setting for the Leica confocal software, locate cells expressing similar levels of CFP and YFP with proper membrane localization.</li>
<li> Using the Leica software acceptor photo-bleaching program, set the donor and acceptor settings to your saved CFP and YFP settings, respectably.</li>
<li> Zooming onto the cell, highlight an ROI (region of interest) in which the photo-destruction of YFP is to occur on the cellular membrane and begin the program.</li>
<li> For photo-destruction of the acceptor, adjust the AOTF to 100% at 514 nm and allow the laser bleaching to continue until 70% of the YFP emission has been depleted. To accelerate bleaching, ROIs are typically chosen in the raster axis of the laser (X-axis).</li>
<li> During photo-bleaching, monitor the cellular movement and reject measurements obtained with appreciable movement in the XY-plane, as these measurements can report false FRET efficiencies.</li>
<li> Pre- and post-bleach images are recorded for both donor (CFP) and acceptor (YFP) and FRET efficiency is calculated as: FRETEff=(Dpost-Dpre)/Dpost for all Dpost &gt; Dpre where Dpre and Dpost is the donor intensity before and after photobleaching respectively.</li>
<li> JMP Software (SAS) is used to determine the extent of experimental variability.</li>
</ol>
4. Representative Results
Transfection efficiencies are usually between 30 to 40%. Despite previous findings by others, we have not seen that transfection and expression of one vector favors that of the other. Indeed, we frequently observe exclusive expression of one fluorophore chimera or the other. Typical FRET efficiencies vary among receptor systems. For the Tie receptor system, typical values are 20-28% for epithelial cells and 19-23% in endothelial cells. For negative controls, typical efficiencies are below 2-3%. The extent of variability will decrease considerably with experience.
<img src="/files/ftp_upload/2149/2149fig1.jpg" alt="Figure 1" /> 
Figure 1. Representative images of transfected EA.hy 926 cells. A) DIC image of EA.hy 926 cell monolayer. B) Fluorescence image of cells displayed in (A). C) Overlay of (A) and (B) demonstrating ~20-30% transfection efficiency.
<img src="/files/ftp_upload/2149/2149fig2.jpg" alt="Figure 2" /> 
Figure 2. Representative acceptor photo-bleaching analysis of FRET occurring between CFP and YFP in an EA.hy926 cell. The CFP emission channel (top panels) and YFP emission channel (bottom two panels) were monitored separately prior to and post acceptor photobleaching. Photobleaching experiments were restricted to, and FRET values calculated from, the region within the green box. FRET efficiency is displayed as an absolute range from high (red-1.0) to low (purple-0.0) on a magnified overlay of a CFP/YFP merged image for orientation purposes only.

<ol>
	<li>Kim, M., Carman, C. V., Springer, T. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bidirectional+transmembrane+signaling+by+cytoplasmic+domain+separation+in+integrins.">Bidirectional transmembrane signaling by cytoplasmic domain separation in integrins.</a> Science. 301, 1720-1725 (2003).</li><li>Zacharias, D. A., Violin, J. D., Newton, A. C., Tsien, R. Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Partitioning+of+lipidmodified+monomeric+GFPs+into+membrane+microdomains+of+live+cells.">Partitioning of lipidmodified monomeric GFPs into membrane microdomains of live cells.</a> Science. 296, 913-916 (2002).</li><li>Seegar, T. C. M., Eller, B., Tzvetkova-Robev, D., Kolev, M., Henderson, S. C., Nikolov, D. B., Barton, W. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tie1-Tie2+interactions+mediate+functional+differences+between+angiopoietin+ligands.">Tie1-Tie2 interactions mediate functional differences between angiopoietin ligands.</a> Molecular Cell. 37 (5), 643-655 (2010).</li><li>Edgell, C. J., McDonald, C. C., Graham, J. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Permanent+cell+line+expressing+human+factor+VIII-related+antigen+established+by+hybridization.">Permanent cell line expressing human factor VIII-related antigen established by hybridization.</a> Proc Natl Acad Sci U S A. 80 (12), 3734-3737 (1983).</li></ol>

No conflicts of interest declared.

There are several steps that are critical to success. The most prominent among them is the relative levels of expression between the two chimeric receptors. To circumvent this issue, one may make stable cell lines expressing both proteins of interest, or identify optimal ratios of vector DNA to permit equivalent expression. Similarly, due to non-uniform transfection across a dish, protein levels will seldom be equivalent among cells. Therefore, attention must be paid to distinguish 'high' expressors from 'low'. Those that display 'average' levels of protein typically yield reliable and reproducible FRET efficiencies. One method our lab has pursued to relieve this issue is the use of adeno and lenti-viruses to 'even' gene expression. Furthermore, an alternative method to acceptor photo-bleaching for determining FRET efficiencies is sensitized emission. Although, despite the potential of sensitized emission to monitor single cells in real-time, we have found acceptor photo-bleaching to be more sensitive and more reliable.
Finally, using FRET to monitor protein interactions can be challenging, and requires careful selection of linker lengths for membrane bound receptors. Furthermore, addition of C/YFP often greatly influences protein expression levels and results in aggregation in the endoplasmic reticulum and golgi apparatus. However, for transient, or unstable, interactions, FRET is the ideal methodology to utilize.

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>DMEM</td>
<td>&nbsp;</td>
<td>Invitrogen</td>
<td>11960-069</td>
<td>&nbsp;</td>
<tr>
<td>Penicillin- Streptomycin</td>
<td>&nbsp;</td>
<td>Invitrogen</td>
<td>15070-063</td>
<td>&nbsp;</td>
<tr>
<td>Fetal Bovine Serum</td>
<td>&nbsp;</td>
<td>Hyclone</td>
<td>N/A</td>
<td>&nbsp;</td>
<tr>
<td>Opti-MEM</td>
<td>&nbsp;</td>
<td>Invitrogen</td>
<td>11058-021</td>
<td>&nbsp;</td>
<tr>
<td>FUGENE 6</td>
<td>&nbsp;</td>
<td>Roche</td>
<td>11814443001</td>
<td>&nbsp;</td>
<tr>
<td>Coverslip Dishes</td>
<td>&nbsp;</td>
<td>MatTek Corp.</td>
<td>P35G014C</td>
<td>&nbsp;</td>
<tr>
<td>pcDNA3.1(+)</td>
<td>&nbsp;</td>
<td>Invitrogen</td>
<td>V790&#x2010;20</td>
<td>&nbsp;</td>
<tr>
<td>Mach 1 Competent Cells</td>
<td>&nbsp;</td>
<td>Invitrogen</td>
<td>C862003</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

imaging protein-protein interactions in vivo

Protein-protein interactions are a hallmark of all essential cellular processes. However, many of these interactions are transient, or energetically weak, preventing their identification and analysis through traditional biochemical methods such as co-immunoprecipitation. In this regard, the genetically encodable fluorescent proteins (GFP, RFP, etc.) and their associated overlapping fluorescence spectrum have revolutionized our ability to monitor weak interactions in vivo using F&ouml;rster resonance energy transfer (FRET)1-3. Here, we detail our use of a FRET-based proximity assay for monitoring receptor-receptor interactions on the endothelial cell surface.

Watch this Scientific Journal Video about Imaging Protein-protein Interactions in vivo at JoVE.com

Imaging Protein-protein Interactions in vivo

This protocol describes how to image protein-protein interactions using a FRET-based proximity assay.

Imaging Protein-protein Interactions in vivo

Protein-protein interactions are a hallmark of all essential cellular processes. However, many of these interactions are transient, or energetically weak, ...

Research

JoVE Journal

Biology

Split-Ubiquitin Based Membrane Yeast Two-Hybrid (MYTH) System: A Powerful Tool For Identifying Protein-Protein Interactions

Split-Ubiquitin Based Membrane Yeast Two-Hybrid MYTH System: A Powerful Tool For Identifying Protein-Protein Interactions

The fundamental biological and clinical importance of integral membrane proteins prompted the development of a yeast-based system for the high-throughput ...

In-vivo Detection of Protein-protein Interactions on Micro-patterned Surfaces

In-vivo Detection of Protein-protein Interactions on Micro-patterned Surfaces

Unraveling the interaction network of molecules in-vivo is key to understanding the mechanisms that regulate cell function and metabolism. A multitude of ...

Protein-protein Interactions Visualized by Bimolecular Fluorescence Complementation in Tobacco Protoplasts and Leaves

Many proteins interact transiently with other proteins or are integrated into multi-protein complexes to perform their biological function. Bimolecular ...

Investigating Protein-protein Interactions in Live Cells Using Bioluminescence Resonance Energy Transfer

Assays based on Bioluminescence Resonance Energy Transfer (BRET) provide a sensitive and reliable means to monitor protein-protein interactions in live ...

In Vivo 4-Dimensional Tracking of Hematopoietic Stem and Progenitor Cells in Adult Mouse Calvarial Bone Marrow

In Vivo 4-Dimensional Tracking of Hematopoietic Stem and Progenitor Cells in Adult Mouse Calvarial Bone Marrow

Through a delicate balance between quiescence and proliferation, self renewal and production of differentiated progeny, hematopoietic stem cells (HSCs) ...

Probing High-density Functional Protein Microarrays to Detect Protein-protein Interactions

High-density functional protein microarrays containing ~4,200 recombinant yeast proteins are examined for kinase protein-protein interactions using an ...

Development of Inhibitors of Protein-protein Interactions through REPLACE: Application to the Design and Development Non-ATP Competitive CDK Inhibitors

REPLACE is a unique strategy developed to more effectively target protein-protein interactions (PPIs). It aims to expand available drug target space by ...

Chromatin Immunoprecipitation Assay for the Identification of Arabidopsis Protein-DNA Interactions In Vivo

Chromatin Immunoprecipitation Assay for the Identification of Arabidopsis Protein-DNA Interactions In Vivo

Intricate gene regulatory networks orchestrate biological processes and developmental transitions in plants. Selective transcriptional activation and ...

Study of Protein-protein Interactions in Autophagy Research

Protein-protein interactions are important for understanding cellular signaling cascades and identifying novel pathway components and protein dynamics. ...

Advanced Confocal Microscopy Techniques to Study Protein-protein Interactions and Kinetics at DNA Lesions

Local microirradiation with lasers represents a useful tool for studies of DNA-repair-related processes in live cells. Here, we describe a methodological ...