Name: fabrication of an optical cell dryer for the spectroscopic analysis cells
Uploaded: 2019-01-08T14:00:00
Description: Watch this Scientific Journal Video about Fabrication of an Optical Cell Dryer for the Spectroscopic Analysis Cells at JoVE.com

The authors have no acknowledgments.

1. Design
<ol>
	<li>See Figure 1 for details of the development drawing.</li>
	<li>Cut a 3-mm thick acrylic board to 210 mm in width x 60 mm in height x 104 mm in depth, bond with acrylic adhesive and assemble the case.</li>
	<li>Install as many as 30 optical cells of 12.5 x 12.5 mm.</li>
	<li>Attach switches and lamps for starting and stopping and a variable dial for the drying time setting on the front face of the casing.</li>
	<li>See Figure 2 for an extern...

<ol>
	<li>Byeon, J., Kang, K. H., Jung, H. K., Suh, J. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Assessment+for+Quantification+of+Biopharmaceutical+Protein+Using+a+Microvolume+Spectrometer+on+Microfluidic+Slides.">Assessment for Quantification of Biopharmaceutical Protein Using a Microvolume Spectrometer on Microfluidic Slides.</a> Biochip Journal. 11 (1), 21-29 (2017).</li><li>You, C. C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Detection+and+identification+of+proteins+using+nanoparticle-fluorescent+polymer+'chemical+nose'+sensors.">Detection and identification of proteins using nanoparticle-fluorescent polymer 'chemical nose' sensors.</a> Nature Nanotechnology. 2 (5), 318-323 (2007).</li><li>Nonaka, H., Hideno, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantification+of+cellulase+adsorbed+on+saccharification+residue+without+the+use+of+colorimetric+protein+assays.">Quantification of cellulase adsorbed on saccharification residue without the use of colorimetric protein assays.</a> Journal of Molecular Catalysis. 110, 54-58 (2014).</li><li>Thongboonkerd, V., Songtawee, N., Kanlaya, R., Chutipongtanate, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantitative+analysis+and+evaluation+of+the+solubility+of+hydrophobic+proteins+recovered+from+brain,+heart+and+urine+using+UV-visible+spectrophotometry.">Quantitative analysis and evaluation of the solubility of hydrophobic proteins recovered from brain, heart and urine using UV-visible spectrophotometry.</a> Analytical and Bioanalytical Chemistry. 384 (4), 964-971 (2006).</li><li>Nakashima, N., Okuzono, S., Murakami, H., Nakai, T., Yoshikawa, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DNA+dissolves+single-walled+carbon+nanotubes+in+water.">DNA dissolves single-walled carbon nanotubes in water.</a> Chemistry Letters. 32 (8), 782-782 (2003).</li><li>Ishibashi, Y., Ito, M., Homma, Y., Umemura, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Monitoring+the+antioxidant+effects+of+catechin+using+single-walled+carbon+nanotubes:+Comparative+analysis+by+near-infrared+absorption+and+near-infrared+photoluminescence.">Monitoring the antioxidant effects of catechin using single-walled carbon nanotubes: Comparative analysis by near-infrared absorption and near-infrared photoluminescence.</a> Colloids and Surfaces B-Biointerfaces. , 139-146 (2018).</li><li>Zheng, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DNA-assisted+dispersion+and+separation+of+carbon+nanotubes.">DNA-assisted dispersion and separation of carbon nanotubes.</a> Nature Materials. 2 (5), 338-342 (2003).</li><li>Hughes, M. E., Brandin, E., Golovchenko, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optical+absorption+of+DNA-carbon+nanotube+structures.">Optical absorption of DNA-carbon nanotube structures.</a> Nano Letters. 7 (5), 1191-1194 (2007).</li><li>Zhao, W., Song, C. H., Pehrsson, P. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Water-soluble+and+optically+pH-sensitive+single-walled+carbon+nanotubes+from+surface+modification.">Water-soluble and optically pH-sensitive single-walled carbon nanotubes from surface modification.</a> Journal of the American Chemical Society. 124 (42), 12418-12419 (2002).</li><li>Koh, B., Park, J. B., Hou, X. M., Cheng, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Comparative+Dispersion+Studies+of+Single-Walled+Carbon+Nanotubes+in+Aqueous+Solution.">Comparative Dispersion Studies of Single-Walled Carbon Nanotubes in Aqueous Solution.</a> Journal of Physical Chemistry B. 115 (11), 2627-2633 (2011).</li><li>Nakayama, T., Tanaka, T., Shiraki, K., Hase, M., Hirano, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Suppression+of+single-wall+carbon+nanotube+redox+reaction+by+adsorbed+proteins.">Suppression of single-wall carbon nanotube redox reaction by adsorbed proteins.</a> Applied Physics Express. 11 (7), 075101-075101 (2018).</li><li>Zeranska-Chudek, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Study+of+the+absorption+coefficient+of+graphene-polymer+composites.">Study of the absorption coefficient of graphene-polymer composites.</a> Scientific Reports. 8, 9132-9132 (2018).</li><li>Laptinskiy, K. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Adsorption+of+DNA+Nitrogenous+Bases+on+Nanodiamond+Particles:+Theory+and+Experiment.">Adsorption of DNA Nitrogenous Bases on Nanodiamond Particles: Theory and Experiment.</a> Journal of Physical Chemistry C. 122 (20), 11066-11075 (2018).</li><li>Jena, P. V., Safaee, M. M., Heller, D. A., Roxbury, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=DNA-Carbon+Nanotube+Complexation+Affinity+and+Photoluminescence+Modulation+Are+Independent.">DNA-Carbon Nanotube Complexation Affinity and Photoluminescence Modulation Are Independent.</a> ACS Applied Materials &amp; Interfaces. 9 (25), 21397-21405 (2017).</li><li>Ohfuchi, M., Miyamoto, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optical+properties+of+oxidized+single-wall+carbon+nanotubes.">Optical properties of oxidized single-wall carbon nanotubes.</a> Carbon. 114, 418-423 (2017).</li></ol>

The optical cells can be dried simultaneously with the blowers, and the drying time can be considerably reduced. Even if the stop operation is not executed, it can be safely stopped by using the automatic stop function of the timer. From the measurement results of the drying time distribution, there was no significant difference in drying time because of the difference in the installation position of the optical cells.
A critical step of the protocol is the design of the casing. The challenge ...

Optical cells are used as laboratory instruments in a wide range of fields. In life science research, biomolecules such as nucleic acids and proteins are often utilized for experiments, and spectroscopic methods are widely used for quantitative methods. Accurately quantifying the sample of the experiment is indispensable for obtaining more accurate and reproducible results. The absorption spectrum obtained by a spectrophotometer has often been used for the quantification of biomolecules such as nucleic acids and proteins1,2,3,4. Research on oxidation-reduction characteristics caused by the change in the absorption spectrum and photoluminescence of a carbon nanotube (CNT) dispersed using DNA has also been conducted5,6,7,8,9,10. Optical cells are used for these measurements, but accurate measurements cannot be made unless they are thoroughly washed and dried.
When measuring absorption spectra or photoluminescence, it is impossible to measure precisely in dirty optical cells11,12,13,14,15. Economical disposable optical cells made of polystyrene and poly-methyl-methacrylate are also used to eliminate washing and contamination. However, when precise measurements are required, quartz glasses are often used, because they have extremely excellent optical properties such as light transmittance. In this case, the optical cells are washed after the measurement of the sample and repeatedly used. Usually, after washing optical cells with water or ethanol, they are dried naturally. When rapid drying is required, they are dried one by one by using hair dryers or similar equipment. Cleaning optical cells is one of the most unpleasant and time-consuming procedures in the experiment. As the number of samples increases, the drying time increases, which, in turn, increases the time required to conduct the experiment and research. In past studies, there have been no reports on peripheral devices of optical cells. This study aims to reduce the research time by drying multiple optical cells simultaneously.
We investigated whether other similar products exist. A box-type constant temperature dryer with a temperature control function and a timer function already exists; however, no commercial products with the same configuration can be found.
An outline of the production of this device is described. First, the box-type case is made using an acrylic plate. Nylon netting is attached to the top. A plastic grid is placed on it to fix the optical cell. The control circuit is stored inside the case, and the plastic plate is attached to protect the circuit from water droplets. The control circuit consists of a CPU and is controlled by software. Blowers are attached to the back of the case, and the wind supplied by the blowers enters the optical cells set upside down. The blowers are activated by a switch on the front, and they are automatically stopped by the timer. Depending on the number of optical cells to be dried, two or four blowers can be selected for operation. Water droplets dripping from the optical cells evaporate with the wind from the blowers. The quartz cells are washed with water or ethanol, and the drying time is compared with that of natural drying.

<table>
	<tbody>
		<tr>
			<td>blower</td>
			<td>ebm-papst</td>
			<td>422JN</td>
			<td>Mulfingen, Germany</td>
		</tr>
		<tr>
			<td>Microcomputer</td>
			<td>Atmel Corporation</td>
			<td>ATmega 328 P</td>
			<td>CA, USA</td>
		</tr>
		<tr>
			<td>Blower selection button</td>
			<td>Sengoku Densyo Co., Ltd.</td>
			<td>MS-358 (red)</td>
			<td>Tokyo, Japan</td>
		</tr>
		<tr>
			<td>Blower operationg lamp</td>
			<td>Akizuki Denshi Tsusho Co., Ltd.</td>
			<td>DB-15-T-OR</td>
			<td>Tokyo, Japan</td>
		</tr>
		<tr>
			<td>Blower start button</td>
			<td>Sengoku Densyo Co., Ltd.</td>
			<td>MS-350M (white)</td>
			<td>Tokyo, Japan</td>
		</tr>
		<tr>
			<td>Timer</td>
			<td>Akizuki Denshi Tsusho Co., Ltd.</td>
			<td>SH16K4A105L20KC</td>
			<td>Tokyo, Japan</td>
		</tr>
		<tr>
			<td>Power supply switch</td>
			<td>Marutsuelec Co., Ltd.</td>
			<td>3010-P3C1T1G2C01B02BKBK-EI</td>
			<td>Tokyo, Japan</td>
		</tr>
		<tr>
			<td>Power supply lamp</td>
			<td>Akizuki Denshi Tsusho Co., Ltd.</td>
			<td>DB-15-T-G</td>
			<td>Tokyo, Japan</td>
		</tr>
		<tr>
			<td>OLED module</td>
			<td>Akihabara Co., Ltd.</td>
			<td>M096P4W</td>
			<td>Tokyo, Japan</td>
		</tr>
	</tbody>
</table>

fabrication of an optical cell dryer for the spectroscopic analysis cells

Optical cells, which are experimental instruments, are small, square tubes sealed on one side. A sample is placed in this tube, and a measurement is performed with a spectroscope. The materials used for optical cells generally include quartz glass or plastic, but expensive quartz glass is reused by removing substances, other than liquids, to be analyzed that adhere to the interior of the container. In such a case, the optical cells are washed with water or ethanol and dried. Then, the next sample is added and measured. Optical cells are dried naturally or with a manual hairdryer. However, drying takes time, which makes it one of the factors that increase the experiment time. In this study, the objective is to drastically reduce the drying time with a dedicated automatic dryer that can dry multiple optical cells at once. To realize this, a circuit was designed for a microcomputer, and the hardware using it was independently designed and manufactured.

As shown in Table 1, in the case of ethanol washing, the average drying time in natural drying was 426.4 s, and the average drying time in the optical-cell dryer was 106 s. In the case of water washing, the average drying time in natural drying was 1481.4 s, and the average drying time in the optical-cell dryer was 371.6 s. In both cases, the drying time was reduced to approximately one-fourth. The drying time distribution of the optical-cell dryer is shown in <strong cla...

Watch this Scientific Journal Video about Fabrication of an Optical Cell Dryer for the Spectroscopic Analysis Cells at JoVE.com

Fabrication of an Optical Cell Dryer for the Spectroscopic Analysis Cells

A protocol for fabricating a device for simultaneously drying multiple optical cells is presented.

Optical cells, which are experimental instruments, are small, square tubes sealed on one side. A sample is placed in this tube, and a measurement is ...

Research

JoVE Journal

Engineering

Construction and Testing of Coin Cells of Lithium Ion Batteries

Rechargeable lithium ion batteries have wide applications in electronics, where customers always demand more capacity and longer lifetime.  Lithium ion ...

Fabrication of VB2/Air Cells for Electrochemical Testing

Fabrication of VB2/Air Cells for Electrochemical Testing

A technique to investigate the properties and performance of new multi-electron metal/air battery systems is proposed and presented. A method for ...

Fabrication and Characterization of Disordered Polymer Optical Fibers for Transverse Anderson Localization of Light

We develop and characterize a disordered polymer optical fiber that uses transverse Anderson localization as a novel waveguiding mechanism. The developed ...

Patterning via Optical Saturable Transitions - Fabrication and Characterization

This protocol describes the fabrication and characterization of nanostructures using a novel nanolithographic technique called Patterning via Optical ...

Fabrication and Operation of a Nano-Optical Conveyor Belt

The technique of using focused laser beams to trap and exert forces on small particles has enabled many pivotal discoveries in the nanoscale biological ...

Quantification of Hydrogen Concentrations in Surface and Interface Layers and Bulk Materials through Depth Profiling with Nuclear Reaction Analysis

Nuclear reaction analysis (NRA) via the resonant 1H(15N,&#945;&#947;)12C reaction is a highly effective method of depth profiling that quantitatively and ...

Fabrication of Polymer Microspheres for Optical Resonator and Laser Applications

This paper describes three methods of preparing fluorescent microspheres comprising &#960;-conjugated or non-conjugated polymers: vapor diffusion, ...

Design and Fabrication of an Optical Fiber Made of Water

In this report, an optical fiber of which the core is made solely of water, while the cladding is air, is designed and manufactured. In contrast with ...

Hybrid Printing for the Fabrication of Smart Sensors

A method to combine additively manufactured substrates or foils and multilayer inkjet printing for the fabrication of sensor devices is presented. First, ...