Unsymmetrical bending occurs when the bending moment applied to a structural member does not align with its principal axis. This misalignment leads to complex stress distributions and deflection patterns that differ from those in symmetrical bending, and are essential for designing structures to withstand different loading conditions. In unsymmetrical bending, the neutral axis—where stress is zero—does not necessarily align with the geometric axes of the cross-section. The orientation of the neutral axis depends on the relationship between the applied load and the geometric properties of the section.
The position of the neutral axis is determined by ensuring that the sum of the normal stresses across the section equals zero. The couple moment in unsymmetrical bending refers to the moments caused by forces that do not pass through the centroid of the cross-section. These moments result in bending about multiple axes and are critical in determining the stress distribution across the member.
The proportional limit is the stress level beyond which the material deforms non-linearly, marking the end of elastic behavior. The product of inertia measures the covariance of the coordinates of the area elements of the cross-section relative to the axes. If the axes align with the centroidal axes of the section, simplifying stress calculations, the neutral axis will coincide with these axes, making them principal axes for bending.
From Chapter 20:
Now Playing
Bending
168 Views
Bending
163 Views
Bending
82 Views
Bending
86 Views
Bending
153 Views
Bending
72 Views
Bending
72 Views
Bending
49 Views
Bending
121 Views
Bending
27 Views
Bending
32 Views
Bending
27 Views
Bending
62 Views
Bending
32 Views
Bending
129 Views
See More
ABOUT JoVE
Copyright © 2025 MyJoVE Corporation. All rights reserved
We use cookies to enhance your experience on our website.
By continuing to use our website or clicking “Continue”, you are agreeing to accept our cookies.