Assaying Proteasomal Degradation in a Cell-free System in Plants

Summary

Targeted protein degradation represents a major regulatory mechanism for cell function. It occurs via a conserved ubiquitin-proteasome pathway, which attaches polyubiquitin chains to the target protein that then serve as molecular “tags” for the 26S proteasome. Here, we describe a simple and reliable cell-free assay for proteasomal degradation of proteins.

Abstract

The ubiquitin-proteasome pathway for protein degradation has emerged as one of the most important mechanisms for regulation of a wide spectrum of cellular functions in virtually all eukaryotic organisms. Specifically, in plants, the ubiquitin/26S proteasome system (UPS) regulates protein degradation and contributes significantly to development of a wide range of processes, including immune response, development and programmed cell death. Moreover, increasing evidence suggests that numerous plant pathogens, such as Agrobacterium, exploit the host UPS for efficient infection, emphasizing the importance of UPS in plant-pathogen interactions.

The substrate specificity of UPS is achieved by the E3 ubiquitin ligase that acts in concert with the E1 and E2 ligases to recognize and mark specific protein molecules destined for degradation by attaching to them chains of ubiquitin molecules. One class of the E3 ligases is the SCF (Skp1/Cullin/F-box protein) complex, which specifically recognizes the UPS substrates and targets them for ubiquitination via its F-box protein component. To investigate a potential role of UPS in a biological process of interest, it is important to devise a simple and reliable assay for UPS-mediated protein degradation. Here, we describe one such assay using a plant cell-free system. This assay can be adapted for studies of the roles of regulated protein degradation in diverse cellular processes, with a special focus on the F-box protein-substrate interactions.

Introduction

The ubiquitin/26S proteasome pathway is emerging as a widespread mechanism for control of diverse biological reactions, including transcriptional regulation, cell-cycle progression and signal transduction, receptor down-regulation or endocytosis, among others processes^1-4. In this pathway, the target protein is tagged by ubiquitin residues which are first attached via a thiolester bond to ubiquitin-activating enzyme E1 and then translocated to a cysteine amino acid residue of ubiquitin-conjugation enzyme E2; finally, E2 interacts with ubiquitin ligase E3, resulting in polyubiquitination of the protein substrate. Ultimately, the polyubiquitinated proteins are recognized and degraded by the 26S proteasome. In this mechanism, the E3 enzyme specifies the substrate and acts as the key regulatory component of the ubiquitin/26S proteasome system (UPS). E3 ligases can act independently, such as RING domain ligases, or as part of a multisubunit SCF (Skp1/Cullin/F-box protein) complex, such as F-box domain ligases. SCF-mediated proteasomal degradation pathways are involved in regulation of transcription, cell cycle, signal transduction^5-10 and many other major cellular functions.

Besides these critical roles in regulation of cellular processes, UPS takes the central stage in many plant-pathogen interactions. For example, increasing evidence suggests that several plant pathogens, including Agrobacterium tumefaciens, rely on the host UPS for to facilitate the infection process¹¹. Agrobacterium elicits neoplastic growths on plants, which represent its natural hosts, and it can also transform a wide range of other eukaryotes, from fungi^1,2 to human cells^12,13. During its infection, Agrobacterium exports a DNA element (T-DNA) and several virulence (Vir) proteins into the host cell^12-13. One of these proteins is VirF, the first F-box protein found to be encoded by a prokaryotic genome¹⁴. As part of the SCF ubiquitin ligase complex, VirF, and its functional host homolog VBF¹⁵, facilitate Agrobacterium infection via the UPS-mediated protein degradation, which presumably facilitates uncoating of the invading bacterial T-DNA from its accompanying bacterial and host proteins, VirE2 and VIP1, respectively^16,17. Interestingly, many F-box proteins, including VirF, are intrinsically unstable due to their own proteolysis, which is mediated by autoubiquitination activity^18,19 or by other E3 ligases for which F-box proteins may serve as substrates^20-23.

When studying biochemical activities of F-box proteins, other ubiquitin ligases, and/or their substrates, it would be very useful to employ a simple and reliable assay for proteasomal degradation. Here we describe one such protocol for analyzing protein stability in a cell-free system. In this assay, the stability of the UPS substrate is analyzed in the presence or absence of one of the essential components of the proteasomal degradation pathway, such as an F-box protein, in a cell-free system. Generally, we express the tested protein(s) in plant tissues, prepare cell-free extracts from these tissues and monitor the amounts of the protein(s) of interest by western blotting. The UPS-dependent mechanism of protein degradation is demonstrated by inclusion of specific proteasomal inhibitors and/or using coexpression of dominant-negative form of an SCF component, Cullin. Whereas we illustrate this assay using proteasomal degradation of the Arabidopsis VIP1¹⁷ protein by the F-box protein VBF¹⁵, it may be employed to investigate the stability of any other proteasomal substrates.

Protocol

1. Protein expression

1. Choice of expression system
   Select the system, i.e., vectors and vector delivery method, best suited for expression of the protein of interest in the specific model organism/cell. Note that our assay requires expression of the tested proteins in easily detectible amounts, which is best achieved by transient transformation of large numbers of cells. In plants, for example, this is best accomplished using binary plasmids as expression vectors and Agrobacterium as delivery system.
2. Construction of binary expression vectors
   Clone the coding sequence(s) of the protein(s) of interest into an expression vector either alone or in translational fusion to an epitope tag. Use vectors suitable for the chosen expression system and standard molecular biology procedures for gene cloning. For Agrobacterium-mediated gene delivery, employ binary vectors and introduce them, also using standard protocols, into an Agrobacterium strain, such as EHA105, for subsequent inoculation of plant tissues.
3. Choice of plant species
   Select the plant species in which the protein(s) of interest will be expressed. Note that, while any plant species susceptible to Agrobacterium-mediated genetic transformation can be used, our plant species of choice is Nicotiana benthamiana, which is easily grown, highly susceptible to Agrobacterium, and has large leaves which are easily inoculated.
4. Plant growth
   Grow one plant for 4 to 6 weeks in a pot with Pro-Mix BX in a pot (20 cm x 20 cm x 20 cm) under environmentally-controlled conditions (e.g., growth chamber) of long day (i.e., 16 h of 130-150 µE m-2 s-1 light at 23°C and 8 h dark at 20°C) and 40-65% relative humidity.
   1.5.2 Fertilize occasionally with commercially available products per manufacturer’s instructions. Once the plant is grown, select leaves with the size of 50 mm x 70 mm or larger (these length measurements do not include the petiole) for Agrobacterium inoculation.
5. Inoculation with Agrobacterium
   Grow Agrobacterium strain harboring the binary construct expressing the tested protein(s) from step 1.3 overnight at 28°C in YEP medium (1% peptone, 1% yeast extract, and 0.5% NaCl) supplemented with appropriate antibiotics (e.g., 100 mg/L streptomycin and 10 mg/L rifampicin for pPZP-RSC2-based vectors^24-25).
   1.6.2 Centrifuge the cells, resuspended to OD₆₀₀ =0.5 in infiltration buffer [10 mM MgCl₂, 10 mM Mes (pH 5.6), 100 µM acetosyringone], and incubate for 2 h at room temperature. Infiltrate the culture into the abaxial side of a leaf, using a 1-mL needleless syringe; note that the leaves are inoculated in situ, while is attached to the plant.
   1.6.3 After infiltration, grow the plant for 72 h under the light regime of 16 h 130-150 µE m-2 s-1 light at 23°C/8 h dark at 20°C before harvesting.
6. Application of proteasomal inhibitors
   To support the notion that the tested protein(s) is degraded via a proteasomal pathway, use specific proteasomal inhibitors MG132 and lactacystin^28-29, which should reduce or even block degradation. Four hours before harvesting (see Step 2.1), infiltrate the Agrobacterium-inoculated leaf areas with 10 μM MG132 (EMD Millipore) or 10 μM lactacystin (Sigma-Aldrich) or mock-treat the leaf with the respective solvents, i.e., 0.1% DMSO or distilled water.

2. Preparation of cell-free extracts

1. Leaf harvesting
   Harvest the inoculated areas of the leaf, usually ca. 200-400 mg of fresh weight, and grind them into fine powder in liquid nitrogen. Alternatively, bead-beat the tissues, using any bead-beater (e.g., Biospec) or a dental amalgamator (e.g., TPC Advanced Technologies) directly in the degradation buffer (see Step 2.2).
2. Protein extraction
   Prepare total protein extract by placing the ground tissue into 500 μL of degradation buffer [50mM Tris-HCL (pH 7.5), 100 mM NaCl, 10 mM MgCl₂, 5 mM DTT, 5 mM adenosine 5´-triphosphate, and 1x protease inhibitor cocktail (Sigma-Aldrich)]. Note that the protease inhibitor cocktail mainly affects serine, cysteine, aspartic, and metalloproteases and does not interfere with the 26S protease. Clarify the extract by two sequential centrifugations at 12,000 x g for 5 min.
3. Protein degradation reaction
   Transfer equal volumes of extracts, usually 20 μL, to microfuge tubes and incubate them at room temperature for increasing periods of time. Typically, sample time zero, and 5, 10, 15, 20, and 30 min time points. Stop reactions by boiling in SDS gel-sample buffer, and analyze them by western blotting.

3. Detecting protein degradation by immunoblotting

1. Gel electrophoresis
   3.1.1 Resolve the protein samples by SDS-polyacrylamide gel electrophoresis and electrotransfer the resolved proteins to a nitrocellulose membrane according to the standard protocol³⁰.
   3.1.2 Determine protein concentration using the Bradford method (Bio-Rad), and load 50-80 µg of total protein per lane. Make sure that all samples are loaded equally. For loading controls, compare intensities of a ubiquitous protein species, such as putative RuBisCo large chains which migrate as a major band with a relative electrophoretic mobility of around 50 kDa; they can be detected on Coomassie blue-stained gels or on Ponceau S- or fluorescent SYPRO Ruby-stained nitrocellulose membranes.
2. Blocking
   Block the membrane with 5% skim milk in TBST (10 mM Tris-HCl, 140 mM NaCl, 0.05% Tween 20, pH 7.4) for 1 h at room temperature.
3. Primary antibody
   Dilute primary anti-epitope antibody in 1% skim milk in TBST to the concentration recommended by the manufacturer and incubate with the blocked membrane for 1 h at room temperature or for overnight at 4ºC with gentle agitation.
4. Rinsing
   Rinse the membrane is rinsed in 20 ml TBST for 15 min once, and twice for 5 min at room temperature with gentle agitation.
5. Secondary antibody
   Dilute secondary antibody (e.g., anti-rabbit IgG) conjugated with horse radish peroxidase (HRP) in 1% skim milk in TBST as recommended by the manufacturer and incubate with the membrane for 1 h at room temperature with gentle agitation.
6. Detection
   Rinse the membrane again as described in Step 3.4. After the final rinse in TBST, visualize the proteins of interest with an HRP chemiluminescent substrate, most commonly using an ECL kit.  

Results

Figure 1, adapted from Zaltsman et al.¹⁷, illustrates representative experiments for detection of proteasomal degradation in a cell-free system. Specifically, we demonstrate destabilization of a plant defense-related protein VIP1 by the VBF F-box protein via the SCF^VBF pathway in N. benthamiana. Arabidopsis VBF and HA-tagged VIP1 (HA-VIP1) proteins were transiently coexpressed, and HA-VIP1 content protein within extracts of the expressing leaves was analyz...

Discussion

This assay relies on the expression of the tested proteins in plant tissues; thus, the potential proteasomal degradation process obviously occurs already within the living tissues. We assay protein destabilization, however, only in the extracts, with the time zero sample serving as the initial reference point. Hence, we define it as a cell-free assay.

One important aspect for the success of this assay is the correct choice of the expression vector from which the tested protein(s) will be produ...

Materials

Name	Company	Catalog Number	Comments
Protein assay kit	Bio-Rad	500-0001
Proteinase inhibitor cocktail	Sigma-Aldrich	S8820
Mini-Protean system	Bio-Rad	165-8000
Semi-dry western blotting SD electrotransfer system	Bio-Rad	170-3940
Affinity Purified Rabbit Anti-Ha	ICL Lab	RHGT-45A-Z
Goat anti-Rabbit IgG Peroxidase Conjugate	Thermo Scientific	31460
BioTrace, NT nitrocellulose transfer membrane	Pall Corporation	27377-000
Immobilon western chemiluminescent HRP substrate	EMD Millipore	WBKL S0 050
MG132	EMD Millipore	474790-1MG
Lactacystin	Sigma-Aldrich	L6785
Thermo Scientific Pierce Fast Western Blot Kit, ECL Substrate	Pierce	35055