JoVE Logo

Sign In

Dissolved Oxygen in Surface Water

Overview

Source: Laboratories of Margaret Workman and Kimberly Frye - Depaul University

Dissolved oxygen (DO) measurements calculate the amount of gaseous oxygen dissolved in surface water, which is important to all oxygen-breathing life in river ecosystems, including fish species preferred for human consumption (e.g. bluegill and bass), as well as decomposer species critical to the recycling of biogeochemical materials in the system.

The oxygen dissolved in lakes, rivers, and oceans is crucial for the organisms and creatures living in it. As the amount of dissolved oxygen drops below normal levels in water bodies, the water quality is harmed and creatures begin to die. In a process called eutrophication, a body of water can become hypoxic and will no longer be able to support living organisms, essentially becoming a “dead zone.”

Eutrophication occurs when excess nutrients cause algae populations to grow rapidly in an algal bloom. The algal bloom forms dense mats at the surface of the water blocking out two essential inputs of oxygen for water: gas exchange from the atmosphere and photosynthesis in the water due to the lack of light below the mats. As dissolved oxygen levels decline below the surface, oxygen-breathing organisms die-off in large amounts, creating an increase in organic matter. The excess organic matter causes an increase in the oxygen-breathing decomposer populations in the benthic zone, which further depletes the remaining dissolved oxygen levels during the metabolic decomposition activity. Once the oxygen levels become this low, mobile oxygen-breathing species (e.g. fish) will move away, leaving no aerobic life in the water and creating a dead zone.

The Azide-Winkler titration method uses titration to determine the concentration of an unknown in a sample. Specifically, sodium thiosulfate is used to titrate iodine, which can be stoichiometrically related to the amount of dissolved oxygen in a sample.

Procedure

1. Sample Dissolved Oxygen Measurement

  1. At the water collection site, use a calibrated pipette to add 2 mL manganous sulfate to a clear 300-mL BOD bottle filled with the sample water. Be careful not to introduce oxygen into the sample by inserting the pipette tip under the sample surface and carefully dispensing manganous sulfate. This will avoid creating bubbles until the sample is “fixed” and prevents change to the dissolved oxygen concentration.
  2. Using the same technique, add 2 mL alkal

Log in or to access full content. Learn more about your institution’s access to JoVE content here

Results

A dissolved oxygen level of 6 mg/L is sufficient for most aquatic species. Dissolved oxygen levels below 4 mg/L are stressful to most aquatic animals. Dissolved oxygen levels below 2 mg/L will not support aerobic aquatic life (Figure 5).

The maximum amount of oxygen that can be dissolved in water varies by temperature (Table 1).

DO measurements in mg/L are converted to % saturation using water temperature and the conversion chart be

Log in or to access full content. Learn more about your institution’s access to JoVE content here

Application and Summary

Slow-moving rivers are particularly vulnerable to low DO levels, and in extreme cases, these DO levels can lead to hypoxic conditions, creating “dead zones” where aerobic life is no longer supported by a body of water (Figure 7). Once plants and animals die-off, the build-up of sediment that occurs can also raise the riverbed, allowing plants to colonize over the water and could lead to the loss of the river all together (Figure 8). Surface waters at higher altitudes are also

Log in or to access full content. Learn more about your institution’s access to JoVE content here

Tags
Dissolved OxygenSurface WaterAzide Winkler Titration MethodAerobic LifeWater EcosystemsGaseous OxygenWater QualityOrganismsSodium ThiosulfateIodine TitrationOxygen ConcentrationVideo DemonstrationEutrophicationExcess NutrientsAlgal BloomsHypoxia

Skip to...

0:00

Overview

1:14

Principles of Measuring Dissolved Oxygen in Surface Water

3:27

Sample Collection and Fixing in the Field

4:42

Measuring Dissolved Oxygen in Surface Water Samples in the Laboratory

6:04

Results

7:01

Applications

9:07

Summary

JoVE Logo

Privacy

Terms of Use

Policies

Research

Education

ABOUT JoVE

Copyright © 2024 MyJoVE Corporation. All rights reserved