Sign In

Electrical Safety

Overview

Robert M. Rioux & Suprita Jharimune, Pennsylvania State University, University Park, PA

Among the many hazards present in the laboratory, electrical hazards are one of the most common we must be cognizant of since most of the laboratory equipment we use requires electricity for operation. Improper handling or operation of electrical devices might lead to electric shock with the potential risk of injury or even death. Electric sparks can lead to fire or explosion (since many flammable chemicals may be stored nearby to electrified instrumentation). Therefore, knowledge regarding electrical safety and what to do in case of emergency is essential for the laboratory personnel. Precautions can be employed when working in the laboratory to avoid electric shock and electrical fire or explosion.

Procedure

1. Preparation for Electrical Hazards

  1. Be familiar with the location of the laboratory electric control panel and know how to shut down the power in case of emergency. Locate the circuit breaker box in the laboratory and identify the circuit in which the electrified equipment is plugged into. All circuit breakers should be labeled appropriately, identifying the laboratory area or specific equipment it is associated with.
  2. Be familiar with the type and location(s) of fire extinguishers in case of an el

Log in or to access full content. Learn more about your institution’s access to JoVE content here

Application and Summary

Electrical devices are everywhere in the laboratory. It is essential to follow electrical safety principles to prevent electrical shock, electrical fire, or explosion. Be prepared about what steps should be taken in the case of emergency. Identify and mark the location of fire extinguishers in the laboratory. Be sure to use an extinguisher meant for a Class C fire. Always remember to get to personal safety first and then shut down the power to any malfunctioning electrical devices if it can be done in a safe manner.

Log in or to access full content. Learn more about your institution’s access to JoVE content here

References
  1. Electrical Safety in the Lab, 2009, Lab Manager. at http://www.labmanager.com/lab-health-and-safety/2009/11/electrical-safety-in-the-lab?fw1pk=2#.V7DGYT4rJcw
  2. Electrical Safety in the Laboratory, Environmental Health & Center, the University of Iowa. at https://ehs.research.uiowa.edu/electrical-safety-laboratory
  3. Portable Fire Extinguishers: Fire Extinguisher Use at https://www.osha.gov/SLTC/etools/evacuation/portable_use.html
Tags
Electrical SafetyElectrical EquipmentHandlingChemical MaterialsElectric ShockFireExplosionsPreventionInspectionPower CordsWaterChemicalsSituational AwarenessPrecautionsFrayed CordExposed WiresSturdy SurfaceClutterDebrisFlammable ChemicalsCorrosive ChemicalsEmergency Shut OffCircuit Breaker BoxLabeling CircuitsLaboratory Electrical Equipment

Skip to...

0:04

Overview

1:12

Before Powering Up

2:16

Avoiding Electrical Shock

2:59

In Case of an Emergency

4:29

Summary

JoVE Logo

Privacy

Terms of Use

Policies

Research

Education

ABOUT JoVE

Copyright © 2024 MyJoVE Corporation. All rights reserved