Name: staining of proteins in gels with coomassie g-250 without organic solvent and acetic acid
Uploaded: 2009-08-14T00:00:00
Description: Watch this Scientific Journal Video about Staining of Proteins in Gels with Coomassie G-250 without Organic Solvent and Acetic Acid at JoVE.com

<p class="jove_content">We would like to acknowledge the technical assistance of Ines Rack&eacute;.</p>

<p class="jove_title">Part 1:  Preparation of the CBB staining solution</p>
<ol>
<li>60-80 mg of CBB G-250 are dissolved in 1 liter of bidistilled water by stirring for 2-4 hours. Finally, 3 ml of concentrated HCl is added to the dark blue solution with stirring for another minute and stored in the dark for later use. The solution can be stored for weeks up to several months without losing its staining efficiency.</li>
<li>Concentrated HCl should be handled with the usual care und used under a fume hood. The final solution will be at about pH 2...

<ol>
	<li>Wondrak, E. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Process+for+fast+visualization+of+protein.">Process for fast visualization of protein.</a> <em style='font-style: italic'>US patent</em>. , (2001).</li><li>Wondrak, E. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Solution+for+fast+visualization+of+protein.">Solution for fast visualization of protein.</a> <em style='font-style: italic'>US patent</em>. , (2001).</li></ol>

<ul>
<li>The washing steps are critical for the efficient staining of the proteins. A reduced washing time below 2 min or reduced volume of water (&lt;50ml) can result in pale blue protein bands, most likely due to higher amounts of residual SDS in the gel.</li>
<li>If the proteins are going to be analysed by mass spectrometry, the heating steps in the microwave oven should be skipped, the time for washing of the gel extended to about 10 min in each step and the staining time extended until the band intensity is strong enough. Heating the gel...

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>Coomassie Brilliant Blue G-250</td>
<td>&nbsp;</td>
<td>AppliChem</td>
<td>A3480</td>
<td>any other CBB G-250 could be used as well</td>
</tr>
<tr>
<td>Concentrated HCl</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>
	

staining of proteins in gels with coomassie g-250 without organic solvent and acetic acid

In classical protein staining protocols using Coomassie Brilliant Blue (CBB), solutions with high contents of toxic and flammable organic solvents (Methanol, Ethanol or 2-Propanol) and acetic acid are used for fixation, staining and destaining of proteins in a gel after SDS-PAGE. To speed up the procedure, heating the staining solution in the microwave oven for a short time is frequently used. This usually results in evaporation of toxic or hazardous Methanol, Ethanol or 2-Propanol and a strong smell of acetic acid in the lab which should be avoided due to safety considerations. In a protocol originally published in two patent applications by E.M. Wondrak (US2001046709 (A1), US6319720 (B1)), an alternative composition of the staining solution is described in which no organic solvent or acid is used. The CBB is dissolved in bidistilled water (60-80mg of CBB G-250 per liter) and 35 mM HCl is added as the only other compound in the staining solution. The CBB staning of the gel is done after SDS-PAGE and thorough washing of the gel in bidistilled water. By heating the gel during the washing and staining steps, the process can be finished faster and no toxic or hazardous compunds are evaporating. The staining of proteins occurs already within 1 minute after heating the gel in staining solution and is fully developed after 15-30 min with a slightly blue background that is destained completely by prolonged washing of the stained gel in bidistilled water, without affecting the stained protein bands.

Watch this Scientific Journal Video about Staining of Proteins in Gels with Coomassie G-250 without Organic Solvent and Acetic Acid at JoVE.com

Staining of Proteins in Gels with Coomassie G-250 without Organic Solvent and Acetic Acid

<p class="jove_content">A short protocol for protein staining with Coomassie Brilliant Blue (CBB) G-250 in polyacrylamide gels is described without using organic solvents or acetic acid as in the classical staining procedures with CBB.</p>

In classical protein staining protocols using Coomassie Brilliant Blue (CBB), solutions with high contents of toxic and flammable organic solvents ...

Research

JoVE Journal

Biology

Staining Proteins in Gels

Following separation by electrophoretic methods, proteins in a gel can be detected by several staining methods. This unit describes protocols for ...

Fast and Sensitive Colloidal Coomassie G-250 Staining for Proteins in Polyacrylamide Gels

Coomassie Brilliant Blue (CBB) is a dye commonly used for the visualization of proteins separated by SDS-PAGE, offering a simple staining procedure and ...

Profiling of Methyltransferases and Other <em>S</em>-adenosyl-<sub>L</sub>-homocysteine-binding Proteins by Capture Compound Mass Spectrometry (CCMS)

Profiling of Methyltransferases and Other S-adenosyl-L-homocysteine-binding Proteins by Capture Compound Mass Spectrometry CCMS

There is a variety of approaches to reduce the complexity of the proteome on the basis of functional small molecule-protein interactions such as affinity ...

Examining the Conformational Dynamics of Membrane Proteins <em>in situ</em> with Site-directed Fluorescence Labeling

Examining the Conformational Dynamics of Membrane Proteins in situ with Site-directed Fluorescence Labeling

Two electrode voltage clamp electrophysiology (TEVC) is a powerful tool to investigate the mechanism of ion transport1 for a wide variety of membrane ...

High-Throughput Measurement and Classification of Organic P in Environmental Samples

Many types of organic phosphorus (P) molecules exist in environmental samples1.  Traditional P measurements do not detect these organic P compounds since ...

Synthesis of Nine-atom Deltahedral Zintl Ions of Germanium and their Functionalization with Organic Groups

Although the first studies of Zintl ions date between the late 1890's and early 1930's they were not structurally characterized until many years later.1,2 ...

Analyzing and Building Nucleic Acid Structures with 3DNA

The 3DNA software package is a popular and versatile bioinformatics tool with capabilities to analyze, construct, and visualize three-dimensional nucleic ...

A Chemical Screening Procedure for Glucocorticoid Signaling with a Zebrafish Larva Luciferase Reporter System

Glucocorticoid stress hormones and their artificial derivatives are widely used drugs to treat inflammation, but long-term treatment with glucocorticoids ...

Sequence-specific Labeling of Nucleic Acids and Proteins with Methyltransferases and Cofactor Analogues

S-Adenosyl-l-methionine (AdoMet or SAM)-dependent methyltransferases (MTase) catalyze the transfer of the activated methyl group from AdoMet to specific ...

Visualization of miniSOG Tagged DNA Repair Proteins in Combination with Electron Spectroscopic Imaging (ESI)

Visualization of miniSOG Tagged DNA Repair Proteins in Combination with Electron Spectroscopic Imaging ESI

The limits to optical resolution and the challenge of identifying specific protein populations in transmission electron microscopy have been obstacles in ...