For å påføre forbindelser på plantene ved hjelp av Novel 3D-Printed Direct Plant Infusion eller DPI-enheten, må du sørge for at enheten er riktig montert på plantene. Når den er riktig montert, skal plastisolringen skylles mot DPI-enheten, og tuten skal være på linje med hullet som er boret i treet. Bruk en sprøyte eller pipette for å fylle DPI-enheten med den sammensatte løsningen av interesse.
Bruk en sprøyte til å trenge inn i silikonbåndet og plastisolringen motsatt DPI-enheten for å trekke ut luft fra den indre kanalen. Sett ut ekstrahert forbindelse tilbake til DPI-enheten. Legg en ekstra liten med silikontape over hullet som sprøyten lager for å forsterke området og forhindre rifter.
Inspiser apparatet for synlige lekkasjer ved festepunktet og inspiser enhetsbeholderen for et stabilt væskenivå. Dekk den åpne enden av DPI-enheten med en voksforseglingsfilm og trekk den ned for å danne en tetning for å redusere fordampningen av den eksperimentelle forbindelsen. Stikk et enkelt hull i voksfilmen med en sprøytespiss for å forhindre utvikling av vakuum, og fyll deretter på enheten.
Kontroller apparatet daglig for å sikre riktig justering av komponentene, og fyll på væsken med en sprøyte for å unngå at beholderen går tørr til ønsket mengde leveres. Når to milliliter to millimolar CFDA-fargestoff ble introdusert til planten ved hjelp av DPI-enheten, ble det påvist et fluorescerende signal i vaskulaturen til det behandlede anlegget, men var fraværende i det kontrollerte anlegget behandlet med 20% DMSO i vann. Dette signalet ble observert innen 24 timers behandling, jevnt gjennom de dissekerte plantevevstypene.
Behandling av streptomycin på Candidatus Liberibacter Asiaticus eller CLass positive planter viste en reduksjon i gjennomsnittlig bakterietiter til 28 dager etter behandling sammenlignet med kontrollgruppen. De behandlede plantene viste en lavere gjennomsnittlig CLAS-titer over alle kombinerte tidspunkter. Streptomycinbehandlede planter sammenlignet med kontrollene viste en sporadisk økning i ny sunn spylevekst etter 60 dager.
Imidaklopridbehandling på planter reduserte nymfefremveksten signifikant ved den høyeste Imidaklopridkonsentrasjonen sammenlignet med tilsvarende eggtelling. Dette var visuelt tydelig i reduksjonen i nymfehonningduggproduksjonen.