Reinig om te beginnen alle oppervlakken van het koperen koelblok met 70% ethanol in de waterkoelingsassemblage. Draag handschoenen en breng een dunne en gelijkmatige laag van ongeveer 0,4 gram koelpasta aan op één oppervlak van het koperen waterkoelblok. Zorg ervoor dat de oriëntatie van het oppervlak voorkomt dat de buizen elkaar kruisen of buigen.
Reinig op dezelfde manier het hete oppervlak van de peltier met 70% ethanol en breng de koelpasta aan op het oppervlak. Verbind het hete oppervlak van het peltier met het koperen koelblokoppervlak met koelpasta volgens de oriëntatie van de draad. Oefen druk uit om het vast te zetten en maak de overtollige koelpasta schoon.
Zorg er dan voor dat de 12 volt voeding en de afstembare voeding uit zijn. Verbind de rode draad van de peltier met de positieve uitgang en de zwarte draad met de negatieve uitgang van de afstembare voeding met behulp van een krokodillenklem. Nadat u de elektrische en waterkoelingsaansluitingen opnieuw hebt gecontroleerd, schakelt u de 12 volt-voeding en de afstembare voeding sequentieel in.
Zet de afstembare voeding geleidelijk op 12 volt, zodat de stroom ongeveer zes ampère moet zijn met de voorgestelde peltier. Meet na twee minuten de temperatuur met een infraroodthermometer zonder het koude oppervlak aan te raken, dat kouder moet zijn dan min 35 graden Celsius.