For å begynne å rengjøre alle overflatene på kobberkjøleblokken med 70% etanol i vannkjøleenheten. Bruk hansker og påfør et tynt og jevnt lag på rundt 0,4 gram termisk pasta på en overflate av kobbervannkjøleblokken. Sørg for at overflateretningen forhindrer at rørene krysser eller bøyer seg.
Rengjør på samme måte den varme overflaten av peltieren med 70% etanol og påfør termisk pasta på overflaten. Koble den varme overflaten til kobberkjøleblokkoverflaten med termisk pasta etter ledningens orientering. Påfør trykk for å sikre den og rengjør overflødig termisk pasta.
Kontroller deretter at 12 volts strømforsyning og justerbar strømforsyning er slått av. Koble den røde ledningen til peltieren til den positive utgangen og den svarte ledningen til den negative utgangen fra den justerbare strømforsyningen ved hjelp av et alligatorklips. Etter å ha kontrollert tilkoblingene til strømforsyning og vannkjøling, må du slå på 12 volt strømforsyning og justerbar strømforsyning sekvensielt.
Vri gradvis den justerbare strømforsyningen til 12 volt, slik at strømmen skal være rundt seks ampere med den foreslåtte peltieren. Etter to minutter måler du temperaturen med et infrarødt termometer uten å berøre den kalde overflaten, som skal være kaldere enn minus 35 grader Celsius.