För att börja, rengör alla ytor på kopparkylblocket med 70% etanol i vattenkylningsaggregatet. Använd handskar och applicera ett tunt och jämnt lager på cirka 0,4 gram termisk pasta på en yta av kopparvattenkylningsblocket. Se till att ytorienteringen förhindrar att rören korsar eller böjs.
På samma sätt, rengör den heta ytan på peltier med 70% etanol och applicera termisk pasta på ytan. Anslut den peltier-heta ytan till kopparkylblockets yta med termisk pasta efter trådens orientering. Applicera tryck för att säkra det och rengör överskottet av termisk pasta.
Kontrollera sedan att 12 V-strömförsörjningen och den justerbara strömförsörjningen är avstängda. Anslut den röda ledningen på peltiern till den positiva utgången och den svarta ledningen till den negativa utgången från den avstämbara strömförsörjningen med en alligatorklämma. Efter att ha kontrollerat anslutningarna för el- och vattenkylningsaggregatet, slå på 12 volts strömförsörjning och avstämbar strömförsörjning sekventiellt.
Vrid gradvis den justerbara strömförsörjningen till 12 volt så att strömmen ska vara cirka sex ampère med den föreslagna peltieren. Efter två minuter mäter du temperaturen med en infraröd termometer utan att röra den kalla ytan, som ska vara kallare än minus 35 grader Celsius.