Name: Protocol for Measuring Mitophagy in Caenorhabditis elegans
Uploaded: 2023-05-19T13:40:00
Description: Watch this Scientific Journal Video about Protocol for Measuring Mitophagy in Caenorhabditis elegans at JoVE.com

protocol for measuring mitophagy in caenorhabditis elegans

Kwantificering van mitofagie in C. elegans en een leverkankercellijn

Mitochondria are essential for all aerobic animals, including humans. They convert the chemical energy of biomolecules to adenosine triphosphate (ATP) via oxidative phosphorylation1, synthesize heme2, degrade fatty acids through &#946; oxidation3, regulate calcium4 and iron5 homeostasis, control cell death by apoptosis6, and generate reactive oxygen species (ROS), which play a vital role in redox homeostasis7. Two complementary and opposite processes maintain the integrity and proper function of the mitochondria: the synthesis of new mitochondrial components (biogenesis) and the selective removal of damaged ones through mitochondrial autophagy (i.e., mitophagy)8.
Several mitophagy pathways are mediated by enzymes, such as PINK1/Parkin, and receptors, including FUNDC1, FKBP8, and BNIP/NIX9,10. Notably, the selective degradation of mitochondrial components can occur independently of the autophagosome machinery (i.e., through mitochondrial-derived vesicles)11. However, the endpoints of the different selective mitophagy pathways are similar&#160;(i.e.,mitochondrial degradation by lysosomal enzymes)12,13. For this reason, various methods for identifying and measuring mitophagy rely on the colocalization of mitochondrial and lysosomal markers14,15,16,17 and decreased levels of mitochondrial proteins/mitochondrial DNA18.
Below is a concise description of the existing experimental methodologies for measuring mitophagy in animal cells using fluorescence microscopy, emphasizing the mitophagy endpoint phase.
Mitophagy biosensors 
Mitochondrial degradation occurs within the acidic environment of the lysosome19. Therefore, mitochondrial components, including proteins, experience a shift from a neutral to an acidic pH at the endpoint of the mitophagy process. This pattern underpins the mechanism of action of several mitophagy biosensors, including mito-Rosella18 and tandem mCherry-GFP-FIS114. These sensors contain a pH-sensitive green fluorescence protein (GFP) and a pH-insensitive red fluorescence protein (RFP). Therefore, at the endpoint of mitophagy, the green-to-red fluorescence ratio drops significantly due to the quenching of the GFP fluorophore. The major limitations of these sensors are (1) possible F&#246;rster resonance energy transfer (FRET) between the fluorophores; (2) the differential maturation rate of GFP and RFP; (3) dissociation between the GFP and RFP due to proteolytic cleavage of the polypeptide that connects them; (4) fluorescence-emission overlap; and (5) differential fluorophore brightness and quenching15,16.
A sensor that overcomes some of these limitations is the Keima mitochondrial sensor17. The mt-Keima sensor (derived from the coral protein Keima) displays a single emission peak (620 nm). However, its excitation peaks are pH-sensitive. As a result, there is a transition from a green excitation (440 nm) to a red one (586 nm) when shifting from a high pH to an acidic pH16,17. A more recent mitophagy sensor, Mito-SRAI, has advanced the field by allowing for measurements in fixed biological samples20. However, despite the many advantages of genetic sensors, such as the ability to express them in specific tissues/cells and target them to distinct mitochondrial compartments, they also have limitations. One limitation is that the genetic sensors need to be expressed in cells or animals, which can be time-consuming and resource-intensive.
Additionally, the expression of the sensors within mitochondria themselves may influence the mitochondrial function. For example, expressing mitochondrial GFP (mtGFP) in the C. elegans worm body wall muscles expands the mitochondrial network21. This phenotype depends on the function of the stress-activated transcription factor ATFS-1, which plays an essential role in the activation of unfolded protein response in mitochondria (UPRmt)21. Therefore, although genetically encoded mitochondria/mitophagy biosensors are extremely useful for monitoring mitochondria homeostasis in vivo, they may affect the very process they are designed to measure.
Mitochondria/lysosome-specific antibodies and dyes 
Another strategy for testing mitochondrial/lysosome colocalization is to use antibodies against mitochondrial/lysosomal proteins, such as the mitochondrial outer membrane protein TOM20 and lysosomal-associated membrane protein 1 (LAMP1)22. In most cases, secondary antibodies that are conjugated to a fluorophore are used to detect the fluorescence signal via microscopy. Another strategy is to combine genetic constructs with mitochondrial/lysosomal dyes, such as expressing a LAMP1::GFP fusion construct in cells while staining them with a red mitochondrial dye (e.g., Mitotracker Red)16. These methodologies, while effective, require specific antibodies and often involve working with fixed specimens or generating cells/transgenic animals expressing fluorescently labeled mitochondria/lysosomes.
Here, we outline the utilization of a commercial lysosome/mitochondria/nuclear staining kit for assessing the mitophagy-activating properties of synthetic diamine O,O (octane-1,8-diyl)bis(hydroxylamine), hereafter referred to as VL-85023, in C. elegans worms and the human cancer cell line Hep-3B (Figure 1). The staining kit contains a mixture of lysosomal/mitochondrial/nuclear-targeted dyes that specifically stain these organelles23. We previously used this kit to demonstrate the mitophagy activity of 1,8 diaminooctane (hereafter referred to as VL-004) in C. elegans23. Importantly, we validated the staining kit results with the mito-Rosella biosensor and qPCR measurements of the mitochondrial:nuclear DNA content23. This staining kit offers the following advantages. First, there is no need to generate transgenic animals or cells expressing a mitochondrial biosensor. Therefore, we can study unmodified wild-type animals or cells and, thus, save much time, money, and labor. Moreover, as mentioned, expressing mitochondrial biosensors can change the mitochondrial function. Second, the kit is cost-effective, easy to use, and fast. Third, although we demonstrate the method in C. elegans and human cells, it could be modified for other cell types and organisms.
With that said, like any method, the staining kit protocol has drawbacks. For example, the incubation of the worms with the reagent is carried out in the absence of food (we have seen that even dead bacteria significantly decrease the staining efficiency). Although the incubation time is relatively short, it is possible that even in this time frame, homeostatic responses may be altered, including mitophagy. In addition, the binding of the dyes to the ER/mitochondrial/nuclear proteins and other biomolecules may affect the activities of these organelles. Moreover, unlike mitophagy measurement with genetic sensors, we work with worms and cells that have undergone chemical fixation. Therefore, it is impossible to continue monitoring the same worms/cells at different times. Hence, we recommend combining different methodologies to validate the function of mitophagy in a particular physiological process. Below, we present new data demonstrating that VL-850 induces robust mitophagy in C. elegans worms and Hep-3B cells. Therefore, these data further support the hypothesis that VL-850 extends the lifespan of C. elegans and protects C. elegans from oxidative damage through the induction of healthy mitophagy. We have used the proton ionophore carbonyl cyanide 4-(trifluoromethoxy)phenylhydrazone (FCCP), which is a potent mitophagy inducer24, as a positive control.

Auteur in de schijnwerpers: detectie van mitofagie in Caenorhabditis elegans en zoogdiercellen met behulp van organelspecifieke kleurstoffen  

Detectie van mitofagie in Caenorhabditis elegans en zoogdiercellen met behulp van organel-specifieke kleurstoffen

Degradation of damaged mitochondria by mitophagy is essential for the function of the mitochondrial network. Unfortunately, this process declines with age. We develop and use drugs that activate mitophagy, thereby promoting healthy aging to understand the function of mitophagy in aging and age-related diseases, including Alzheimer's.One of the biggest challenges is to measure the mitophagy process without affecting it. Recent studies have shown that GFP expression in the mitochondria of muscle cells induces stress that is MT UPR. Therefore, using dyes in non-transgenic animals or cells is essential and complements genetic technologies.Our protocol has three main advantages. First, there is no need to generate transgenic animals or cells expressing mitophagy biosensors. Second, no need for expensive infrastructure and expertise such as in case of electron microscopy.And third, the organelle dye cocktail is commercially available and the protocol is simple and fast. The new mitophagy-activating compound VL-850 induces robust mitophagy, and in this way protects from oxidative stress and promote lifespan. Now the big question is to determine the underlying mechanism of action.We explored the mechanism at multiple levels, from the cellular to the organismal using C.elegans and mammalian cells.

Watch this Scientific Journal Video about Protocol for Measuring Mitophagy in Caenorhabditis elegans at JoVE.com

Protocol for Measuring Mitophagy in Caenorhabditis elegans  

Protocol voor het meten van mitofagie in Caenorhabditis elegans

Neem om te beginnen de gesynchroniseerde jongvolwassen C.Elegans hermafrodieten in een microcentrifugebuis. Voeg 200 microliter M9-buffer, met poloxameer 188, pluronic F127, en twee microliter reagens van de kleuringskit toe aan de wormpellet. Bedek de buizen met aluminiumfolie om de kleurstoffen tegen licht te beschermen.Laat het mengsel een uur draaien bij 20 RPM bij kamertemperatuur. Draai de wormen vervolgens gedurende één minuut op 500 G. Verwijder daarna de kleuringsoplossing zonder de wormpellet te verstoren.Was de wormen driemaal met M9-buffer en breng ze over in een gezaaide NGM-agarplaat met de juiste behandeling. Was de wormen van de platen in verse microcentrifugebuizen met één milliliter M9-buffer. Bevestig daarna de wormen met 1% formaldehyde op ijs gedurende 30 minuten.En was de wormen driemaal met een milliliter M9-buffer om eventuele resterende formaldehyde te verwijderen. Na het pelleteren van de wormen, zuig de maximale hoeveelheid supernatant op, waarbij de pellet intact blijft in 10 microliter M9. Weeg vervolgens, om 2,5% agarose te bereiden, 0,125 gram agarose in een 10 milliliter borosilicaatglas reageerbuis. Voeg vijf milliliter M9-buffer toe en los de agarose op door de buis voorzichtig te verwarmen met een bunsenbrander.Breng de gesmolten agarose over in een droogbad op 75 graden Celsius. Voeg 100 microliter van de gesmolten agarose toe aan een dekglansmicroscoop afdekglas met behulp van een punt van één milliliter. Plaats onmiddellijk een andere dia loodrecht op de agarosedruppel die een kruisvorm vormt.Scheid na twee minuten de dia's voorzichtig door op het glas van de bovenste afdekking te duwen en het agarosekussen op de onderste afdekschuif te laten. Breng de wormen over op het agarosekussen met een Pasteur glazen pipet. Gebruik een lont gemaakt van een laboratoriumdoekje om overtollige vloeistof te verwijderen.Bedek de wormen vervolgens met een kleinere dekslip en breng transparante nagellak aan op de periferie om verdamping te voorkomen. Plaats de dia in een donkere doos om deze tegen licht te beschermen. Gebruik een confocale microscoop om de wormen binnen 24 uur op de juiste golflengten in beeld te brengen met behulp van een 60-voudige vergrotingslens.Open vervolgens de beeldbewerkingssoftware en klik met de rechtermuisknop op het grijze gebied. Selecteer in de pop-up die verschijnt acquisitie. Ti2 volledige pad.ND-acquisitie en opzoektabellen. Selecteer onder Ti2 full pad 60 keer en pas de fijne scherpstelknop van de microscoop aan om de wormen scherp te stellen. Selecteer vervolgens spinning disc en kies de 16 bit-no binning optie.Stel voor elk fluorescentiefilter de belichtingstijd in op 500 milliseconden en 20 milliseconden voor een helder veld. Zodra deze parameters zijn ingesteld, selecteert u Nu uitvoeren en wacht u tot de uitvoerafbeelding is gegenereerd als een ND2-bestand.

protocol-for-measuring-mitophagy-in-caenorhabditis-elegans

Research

JoVE Journal

Biology

Protocol for Measuring Mitophagy in Caenorhabditis elegans

Detection of Mitophagy in Caenorhabditis elegans and Mammalian Cells Using Organelle-Specific Dyes

Mitochondria are essential for various biological functions, including energy production, lipid metabolism, calcium homeostasis, heme biosynthesis, regulated cell death, and the generation of reactive oxygen species (ROS). ROS are vital for key biological processes. However, when uncontrolled, they can lead to oxidative injury, including mitochondrial damage. Damaged mitochondria release more ROS, thereby intensifying cellular injury and the disease state. A homeostatic process named mitochondrial autophagy (mitophagy) selectively removes damaged mitochondria, which are then replaced by new ones. There are multiple mitophagy pathways, with the common endpoint being the breakdown of the damaged mitochondria in lysosomes. 
Several methodologies, including genetic sensors, antibody immunofluorescence, and electron microscopy, use this endpoint to quantify mitophagy. Each method for examining mitophagy has its advantages, such as specific tissue/cell targeting (with genetic sensors) and great detail (with electron microscopy). However, these methods often require expensive resources, trained personnel, and a lengthy preparation time before the actual experiment, such as for creating transgenic animals. Here, we present a cost-effective alternative for measuring mitophagy using commercially available fluorescent dyes targeting mitochondria and lysosomes. This method effectively measures mitophagy in the nematode Caenorhabditis elegans and human liver cells, which indicates its potential efficiency in other model systems.

Exploring mitophagy through electron microscopy, genetic sensors, and immunofluorescence requires costly equipment, skilled personnel, and a significant time investment. Here, we demonstrate the efficacy of a commercial fluorescence dye kit in quantifying the mitophagy process in both Caenorhabditis elegans and a liver cancer cell line.

Mitochondria are essential for various biological functions, including energy production, lipid metabolism, calcium homeostasis, heme biosynthesis, ...

To begin, take the synchronized young adult C.Elegans hermaphrodites in a micro centrifuge tube. Add 200 microliters of M9 buffer, containing Poloxamer 188, Pluronic F127, and two microliters of the staining kit reagent to the worm pellet. Cover the tubes with aluminum foil to protect the dyes from light.Let the mixture rotate at 20 RPM for one hour at room temperature. Then spin the worms at 500 G for one minute. After that, remove the staining solution without disturbing the worm pellet.Wash the worms with M9 buffer thrice and transfer them into a seeded NGM agar plate containing the appropriate treatment. Wash the worms off the plates into fresh micro centrifuge tubes with one milliliter of M9 buffer. Afterward, fix the worms with 1%formaldehyde on ice for 30 minutes.And wash the worms with one milliliter of M9 buffer thrice to remove any residual formaldehyde. After pelleting the worms, aspirate the maximum amount of supernatant, keeping the pellet intact in 10 microliters of M9.Next, to prepare 2.5%agarose, weigh 0.125 grams of agarose into a 10 milliliter borosilicate glass test tube. Add five milliliters of M9 buffer and dissolve the agarose by gently heating the tube with a bunsen burner.Transfer the melted agarose to a dry bath set at 75 degrees Celsius. Add 100 microliters of the melted agarose onto a deck glosser microscope cover glass using a one milliliter tip. Immediately, put another slide perpendicularly on the agarose drop forming a cross shape.After two minutes, gently separate the slides by pushing the upper cover glass leaving the agarose pad on the bottom cover slide. Transfer the worms onto the agarose pad with a Pasteur glass pipette. Use a wick made of a laboratory wipe to remove excess liquid.Then cover the worms with a smaller cover slip and apply transparent nail polish to the periphery to prevent evaporation. Place the slide in a dark box to protect it from light. Use a confocal microscope to image the worms within 24 hours at the appropriate wavelengths using a 60 times magnification lens.Next, open the imaging software and right click on the gray area. From the popup that appears, select acquisition. Ti2 full pad.ND acquisition, and lookup tables. Under Ti2 full pad, select 60 times and adjust the microscope fine focus knob to bring the worms into focus. Then select spinning disc and choose the 16 bit-no binning option.For each fluorescence filter, set the exposure time to 500 milliseconds and 20 milliseconds for bright field. Once these parameters are set, select run now and wait for the output image to be generated as an ND2 file.

Analyzing the Images of Caenorhabditis elegans after Drug Treatment

Analyzing the Images of Caenorhabditis elegans after Drug Treatment  

After imaging the drug-treated C.elegane, open the ND file in the image J server with the colocalization plugin and select the split images option in the dialogue box. Each ND file contains image planes taken at three wavelengths and visible light. Work with brightfield, green, and red images.Generate duplicates of these images to keep the original image untouched by clicking on image and selecting duplicate or using the keyboard shortcut shift plus D.Then reduce the background by generating another image duplicate as demonstrated earlier. Subtract the background with a rolling radius of 100 and select the create background option to generate an image with the given image's Background. Now go to process, click image calculator and subtract the first duplicated image from the second duplicated image.Use the resulting images for the colocalization analysis. To use the colocalization plugin, convert the green and red channel images to eight bit by clicking image, selecting type, followed by eight bit. Next, click on plugins and select colocalization.To measure the colocalization of mitochondria and lysosome signals, set the ratio to 75%the threshold red channel to 80.0, and the threshold green channel to 50.0. An eight bit binary image containing colocalized puncta and combining the three eight bit images in an RGB image is generated as output. Next, focus on the puncta in the head body wall muscle of the worms by manually selecting the area and creating a mask by clicking edit, selection, and create mask to select the region of interest.To select the particles in the region of interest, use the image calculator to select the colocalized eight bit and masked images. Utilize the operation and to select the puncta in the region of interest generating an image with puncta in the region of interest. Finally, to analyze the area of the colocalized mitochondria and lysosomes, select analyze, followed by analyze particles and measure the summation of the puncta between 0.1625 square micrometers and four square micrometers.The confocal images of the head body wall muscles of worms showed colocalization of mitochondria and lysosomes. VL-850 induced robust mitophagy in the worm's head body wall muscles, indicating a potent mitophagy inducer. The mitophagy potency of VL-850 was similar to that of FCCP.

Analyse van de beelden van Caenorhabditis elegans na medicamenteuze behandeling

Protocol for Measuring Mitophagy in Hep-3B Cancer Cells 17

To begin, take 70 to 80%confluent Hep-3B cells. Remove 250 microliters of medium from each of the wells and add 50 microliters of medium with the appropriate treatment or vehicle. Add 50 microliters of medium to each well containing the staining reagent, and incubate the cells with the dye.After removing the medium and washing the cells with pre-warmed PBS, fix the cells with 200 microliters of fixing solution for 15 minutes at room temperature. Afterward, decant the fixative solution and wash briefly with 200 microliters of PBS. Finally, add 200 microliters of PBS.Keep the cells covered and protected from light at four degrees Celsius, and image within 24 hours.

Protocol voor het meten van mitofagie in Hep-3B kankercellen 17

Image Analysis of  Hep-3B Cells after Drug Treatment

After imaging the drug treated Hep-3B cells, open the confocal images in image J with the colocalization plugin. Open the ND file in the image J server and select the split channels option in the dialogue box. Work with green and red images.Generate duplicates of these images to keep the original image untouched by clicking on image and selecting duplicate or using the keyboard shortcut shift plus D.To reduce the background, generate another image duplicate, subtract the background with a rolling radius of 100, and select the create background option to generate an image with the given images background. Then, go to process. Click image calculator and subtract the first duplicated image from the second duplicated image.Utilize the resulting images for the colocalization analysis. To use the colocalization plugin, convert the green and red channel images to 8 bit by clicking image, selecting type, followed by 8 bit. Next, click on plugins and select colocalization.To measure the colocalization of mitochondria and lysosome signals, set the ratio to 75%the threshold red channel to 80.0, and the threshold green channel to 50.0. An 8 bit binary image containing colocalized puncta and combining the three 8 bit images in an RGB image will be generated. Convert these images to 8 bit images.To obtain the region of interest of the cells, generate an image that highlights the area of cells by selecting a colocalized point's image. To select the entire cell area, select the resultant colocalized points image and click on image, adjust threshold, and set threshold to ensure all the cell area is highlighted. To analyze the area of the cell, select analyze, click analyze particles, and measure all the particles in the image from zero to infinity, the default setting for analyze particles.To analyze the area of the colocalized mitochondria and lysosomes, select the colocalized 8 bit image. Then, select analyze. Click analyze particles and measure the summation of puncta between 0.1625 square micrometers and four square micrometers.Divide the area of the colocalized mitochondria and lysosomes by the total cell area to measure the colocalized puncta. The confocal images of Hep-3B cells displayed colocalization of mitochondria and lysosomes. VL 850 and FCCP induced significant mitophagy in the Hep-3B cells.