Begin met het openen van de MVS-softwaretoepassing op het TEM-instrument en selecteer andere. Sluit de microscoop aan op de MVS-software. Navigeer naar het tabblad metagegevens van de afbeelding en selecteer vergroting, maximale dosis en dosistempo om de beeldstroom die in de live weergave wordt weergegeven, te bedekken.
Andere metagegevens kunnen worden opgenomen als de gebruiker dat wenst. Open het tabblad Dosis. Selecteer dosisbeheer en schakel dosisbewaking in.
Selecteer vervolgens dosislaag weergeven en positieonzekerheid weergeven om geautomatiseerde elektronendosistracking te activeren en de dosiskleuroverlay weer te geven. Stel de waarden voor het lage dosisniveau en het hoge dosisniveau in voordat u op opslaan drukt. Navigeer vervolgens naar het tabblad Instellingen.
Selecteer de dosis en stel de opaciteitswaarden van de dosisnavigatiekaart toe, de dekking en de overlay-opaciteit van het dosisbeeld in. Activeer driftcorrectie in het venster van de live image viewer door op drift correct te klikken. Navigeer vervolgens naar het tabblad gegevensweergave en plot de metagegevenswaarden onscherpte en focusquotiënt op de y-as.
Activeer de focusassistent en selecteer vervolgens de focus kalibreren om de kalibratie van de geautomatiseerde focusassistent uit te voeren. Zodra de kalibratiefocusroutine is voltooid, sluit u het tabblad gegevensweergave. Open in de MVS-software het tabblad beeldanalyse en activeer de live FFT en kwadranten één en twee opties.
Met behulp van de microscoopsoftware passen de bedieningen de bundelcondities aan, zodat de elektronenflux ongeveer 600 uur per seconde is. Ga naar een nieuwe regio in het voorbeeld en centreer de voorbeeld-ROI in de liveweergave van de MVS-software. Houd een constant dosistempo aan terwijl u continu dezelfde ROI in beeld brengt totdat de vlekken die overeenkomen met de atomaire structuur en de FFT zijn verdwenen.