먼저 마이크로드라이브 시스템을 조립합니다. 두 개의 스툴과 이동식 Microdrive를 고정하는 나사를 사용하여 두 개의 컴퓨터 설계 보드를 연결하고 커넥터를 하나의 보드에 부착합니다. Microdrive가 모터 피질 또는 MC 영역의 각 측면에 대해 8개의 가이드 튜브로 구성된 두 세트를 운반할 수 있는지 확인합니다.
가이드 튜브를 같은 길이로 자릅니다. 각각 길이가 약 5cm이고 직경이 35마이크로미터인 16개의 니크롬 와이
Sign in or start your free trial to access this content