Börja med att konstruera kylningen för lakvattenuppsamling och nätsystemet längst ner på kolonnerna. Väg upp 400 gram mineraler och 10 gram organiskt material i en skål enligt önskad behandling. Beräkna sedan vattenhållningskapaciteten med hjälp av ekvationen som visas här.
Justera vattenhållningskapaciteten till 80 % baserat på mineraltyp, kornstorlek och organisk källa. Blanda alla ingredienser försiktigt med en metallsked och fyll kolonnerna med den noggrant blandade blandningen. Placera de fyllda kolonnerna i klimatkammaren.
Ta sedan de förberedda mikrobiella kulturerna. Använd en pipett och inokulera den valda kulturen på kolonnens yta enligt önskad behandling. Skaffa daggmaskar enligt önskad densitet och placera dem försiktigt på ytan av kolonnerna enligt önskad behandling.
Placera nätet ovanpå pelarna för att undvika att daggmaskar rymmer när de väl har introducerats, och på pelare utan daggmaskar för att bibehålla samma förhållanden. Sätt sedan in kolumnerna på respektive plats i akrylskivan också. När du har ställt in bevattnings- och kontrollsystemet klickar du på Redigera för att redigera inställningarna för varje uppgift.
För att aktivera reläet klickar du helt enkelt på den uppgift som kräver att reläet är påslaget. Infoga sedan önskade inställningar i fälten Startdatum och Starttid för att ange startdatum och starttid för operationen. Klicka på Ställ in upprepning och upprepa varje för att ställa in bevattningsfrekvensen.
För att ange datum och tid när reläet ska sluta fungera, klicka på fälten Slutupprepningsdatum och Slutupprepningstid. När du har angett önskade värden klickar du på knappen Spara ändringar. Om du vill stänga av reläet klickar du på den uppgift som åtgärden är att stänga av det specifika reläet.
Ställ in tiden då reläet måste sluta fungera beroende på vattenbevattningshastigheten och bevattningsfrekvensen enligt samma kommandon som för att slå på reläet. När varje relä är inställt klickar du på Spara ändringar. Bevattningssystemet börjar sedan vattna kolonnerna enligt de inställda flödeshastigheterna och frekvenserna.
Bevattningssystemet gjorde det möjligt att justera vattnet i kolonnerna, vilket ledde till små skillnader i bevattningshastigheten. Den genomsnittliga mängden vatten var lägre för bevattningshastigheter på 50 och 150 milliliter per dag, medan den var högre för en bevattningshastighet på 100 milliliter per dag. Värdena för löst oorganiskt kol som uppmättes i slutet av experimentet varierade från 7,352 C till 259,279 milligram kol.
I slutet av försöksperioden överlevde daggmaskarna framgångsrikt i detta organomineraliska system, och visuella tecken på mikrobiell tillväxt kunde upptäckas.