Begynd med at starte Radiation Planning Assistant eller RPA. Gå derefter til dashboardet for serviceanmodninger på RPA-grænsefladen ved at klikke på serviceanmodningskanalen. Klik derefter på den nye formular for at generere en ny anmodningsformular.
Udfyld spørgsmålene under det første afsnit med titlen Demografi. Vælg derefter behandlingsteknikken i rullemenuen til behandling. Klik på informationsikonet i rullemenuen for behandlingsteknik for at få adgang til yderligere oplysninger om behandlingsteknikken.
Udfyld derefter spørgsmålene i det andet afsnit med titlen Generelle spørgsmål om behandling. Gå nu til afsnit tre med titlen Behandlingsspecifikke spørgsmål og udfyld spørgsmålene, herunder detaljerne om behandlingsmålene og recepten. Klik på send for at generere PDF-filen med serviceanmodningen.
Vælg patienten på patientlisten. Gennemse PDF-filen med serviceanmodningen, og klik på acceptér for at godkende den. Gå derefter til CT Scans-dashboardet ved at klikke på CT Scans-kanalen.
Vælg indstillingen, upload CT, og vælg den mappe, hvor CT-scanningen er gemt ved hjælp af folder explorer. Følg vejledningen for at bekræfte valget. Vælg patienten på patientlisten for at gennemgå den tilsvarende uploadede CT-scanning.
Indlæs derefter hele 3D CT-billedet ved at klikke på indlæs 3D. Rul nu mellem udsnittene i alle visninger ved hjælp af knapperne frem eller tilbage under CT-visningen for at gå til næste udsnit. Klik på højre eller venstre skiftknap for at flytte fem udsnit i begge retninger.
Du kan også flytte markøren hen over en visning og bruge musen til at rulle mellem udsnittene. Skæringsknappen kan også klikkes for at overlejre et trådkors på hver CT-visning. Klik derefter på en af de tre visninger for at flytte trådkorset, hvilket får de andre visninger til at følge i overensstemmelse hermed.
Zoom ind på billedet for at gennemgå det yderligere ved hjælp af zoompanoreringsknappen. Højreklik derefter og hold en CT-visning nede ved hjælp af musen til at zoome. Klik på markeret ISO for at flytte CT-visningerne til det markerede ISO-center.
Hvis du vil tilføje et referencepunkt, skal du først flytte de tre visninger til den ønskede placering af referencepunktet ved hjælp af skæringsværktøjet. Klik derefter på knappen Ref Point for at tilføje et referencepunkt. For at tilføje et nyt referencepunkt skal du rydde det aktuelle punkt ved at klikke på ryd referencepunkt.
Tilføj derefter en ny. Accepter CT-scanningen. Besvar derefter spørgsmålene under CT-billederne for at minimere risikoen og reducere fejl i de efterfølgende RPA-beregninger.
Klik nu på accepter og følg vejledningen. For at starte overvågningsprocessen skal du først gennemgå en fuldført RPA-plan ved at vælge patienten og vælge gennemgang øverst på hoveddashboardet. Download en færdig RPA-plan ved at klikke på downloadikonet.
Når et nyt vindue åbnes, downloades DICOM-filerne sammen med PDF-versionen af RPA-planrapporten til import til behandlingsplanlægningssystemet. For at uploade den endelige plan til hjemmesiden skal du vælge patienten og klikke på upload plan. Vælg DICOM-strukturfilen, plan- og dosisfilerne til upload.
Til sidst skal du gennemgå plansammenligningsrapporten ved at vælge patienten. Et eksempel på et lateralt felt fra en hel hjernestrålebehandlingsplan er vist her, mens et lateralt felt fra en knoglet vartegnbaseret fire feltkasseplan for livmoderhalskræft også vises. I begge tilfælde oprettede RPA en endelig planrapport efter download og import af brugerens behandlingsplanlægningssystem.
Serviceanmodningsdashboardet giver en hurtig statusoversigt over serviceanmodningen for aktuelle patienter i RPA.