Beginnen Sie mit dem Drucken einer 3D-Form mit Zwei-Photonen-Polymerisation und montieren Sie sie auf eine Petrischale, die jetzt als Form bezeichnet wird. Für die Herstellung des Geräts inkubieren Sie die Form sieben Minuten lang mit 10 Mikrolitern Hydrophobierungsmittel und spülen Sie sie mit 70% Ethanol, gefolgt von zweimaligem deionisiertem Wasser. Geben Sie die zuvor vorbereitete PDMS-Mischung vorsichtig in die Form, bis die vorgesehene Endhöhe des Geräts erreicht ist.
Inkubieren Sie die abgedeckte Form 18 Minuten lang im vorgeheizten 80-Grad-Gefrierofen. Lösen Sie dann den ausgehärteten PDMS-Block vorsichtig von der Form unter der Laminar-Flow-Haube und tauchen Sie ihn 10 Minuten lang in Isopropanol in eine Glas-Petrischale. Schneiden Sie unter einem Stereomikroskop mit einem Augenstichmesser vorsichtig den zentralen quadratischen Abschnitt und dann entlang der Kanten des Geräts aus.
Tauchen Sie das Gerät dann 30 Minuten lang in Ethanol. Übertragen Sie das Gerät unter einer Laminar-Flow-Haube in eine neue Petrischale und lassen Sie es trocknen.