patient preparation and subject training for hyperpolarized xenon mri

Vurdering af lungefunktion med hyperpolariseret Xenon-129 MR

Hyperpolarized Xenon-129 (HXe) magnetic resonance imaging (MRI)1 is a technique that offers unique insights into lung structure, function, and gas exchange processes. By dramatically amplifying the magnetization of Xenon gas through spin-exchange optical pumping, HXe MRI achieves an order-of-magnitude improvement in signal-to-noise ratio compared to thermally polarized Xenon MRI2,3,4,5,6. This hyperpolarization enables the direct visualization and quantification of Xenon gas uptake into lung tissue and blood, which would otherwise be undetectable with conventional thermally polarized MRI7.
Chemical shift saturation recovery (CSSR) MR spectroscopy8,9,10,11,12,13 has proven to be one of the most valuable HXe MRI techniques. CSSR involves selectively saturating the magnetization of Xenon dissolved in lung tissue and blood using frequency-specific radiofrequency (RF) pulses. The subsequent recovery of the dissolved-phase (DP) signal as it exchanges with fresh hyperpolarized Xenon gas in the airspaces on a timescale of ms offers important functional information about the lung parenchyma.
Since its development in the early 2000s, the techniques behind CSSR spectroscopy have been progressively refined14,15,16,17,18,19,20,21,22,23. Further, advances in modeling Xenon uptake curves have enabled the extraction of specific physiological parameters, such as alveolar wall thickness and pulmonary transit times10,24,25,26. Studies have shown CSSR&#39;s sensitivity to subtle changes in lung microstructure and gas exchange efficiency in the form of pulmonary abnormalities found in clinically healthy smokers27, as well as in a range of lung diseases, including chronic obstructive pulmonary disease (COPD)18,27,28, fibrosis29, and radiation-induced lung injury30,31. CSSR spectroscopy has also been demonstrated to be sensitive to detect oscillations in the DP signal corresponding to pulsatile blood flow during the cardiac cycle32.
While significant progress has been made, practical challenges remain in implementing CSSR spectroscopy on clinical MRI systems. Scan times requiring single-dose breath holds approaching 10 s may be too long for pediatric subjects33,34 or patients with severe lung disease35,36. Additionally, the technique is susceptible to measurement biases if acquisition parameters such as the order of the saturation delay times or the efficacy of the dissolved-phase saturation are not properly optimized21. To address these limitations and make CSSR more accessible to the broader research community, clear, step-by-step protocols for both conventional breath hold and free-breathing acquisitions, currently under development, are needed.
The objective of this paper is to present a detailed methodology for performing optimized CSSR MR spectroscopy using HXe gas. The protocol will cover polarization and delivery of the Xenon gas, RF pulse calibration, sequence parameter selection, subject preparation, data acquisition, and key steps in data analysis. Examples of experimental results will be provided. It is hoped that this comprehensive guide will serve as a foundation for CSSR implementations across sites and help realize the full potential of this technique for quantifying lung microstructural changes in a range of pulmonary diseases.

Forfatter Spotlight: Fremme af lungesygdomsforskning med friåndende hyperpolariseret Xenon-129 MR

Kvantitativt mål for lungestruktur og funktion opnået ved hyperpolariseret xenonspektroskopi

Our research focuses on using hyperpolarizing on 129 MRI technology to assess pulmonary function and to investigate lung diseases. The main objective is to see how this imaging technique can lead to better detection, understanding, and tracking of different lung conditions. Most hyperpolarized lung MR imaging is performed during a breath hold.We believe that pulmonary function quantified under such an artificial condition, may not fully reflect gas exchange during regular respiration, and we are testing new free breathing measurements that do not require any breath hold. Current challenges include the optimization of the CSSR acquisition technique for consistency and accuracy in the face of physiological variation and patient compliance. Severely ill or pediatric patients struggle with maintaining lengthy breath holds.The CSSR heart technique appears particularly sensitive to changes in alveolar septal wall thickness. As we and others in the field of demonstrated, alveolar wall thickening can indicate the presence of interstitial edema, inflammation, or pulmonary fibrosis. All metrics derived from CSSR spectroscopy acquisitions are currently based on the temporal dynamics of the signal amplitudes.In the future though, we hope to include changes in peak shape and center frequency in the analysis to obtain a more complete picture of the ongoing gas exchange processes.

Patientforberedelse og emnetræning til hyperpolariseret xenon MR

Til at begynde med skal du opsætte det fysiologiske overvågningssystem til at registrere åndedrætskurver og gasanalyse i realtid under billeddannelse. Tilslut og test MR-rumhovedtelefonerne med lydsignalet, der guider motivet ved hjælp af en lydoptagelse fra indånding og udånding. Juster afspilningshastigheden for lydsporet. Indånding.Ånd ud.Baseret på den normale vejrtrækningsfrekvens for hver forsøgsperson. Indånd.Ånd ud. Forbered derefter scannersengen med en ren nakkestøtte, benstøttepude og tæppe. Placer den løsnede Xenon 129 brystvestspole på bordet på MR-scanneren, og sæt stikket på spolen i.For en gratis vejrtrækningsundersøgelse skal du introducere forsøgspersonen til indånding-udånding-stemmeoptagelsen for synkroniseret vejrtrækning under billeddannelse. Før forsøgspersonen ind i MR-rummet og placer dem på scannersengen, liggende oven på den åbne xenonvestspole. Når motivet er placeret, skal du fastgøre Velcro-stropperne, så vestspolen er lukket, men ikke indsnævrer forsøgspersonens bryst.For en gratis vejrtrækningsundersøgelse skal du placere en ansigtsmaske med en pneumatac over patientens ansigt. Spænd stropperne, så masken sidder tæt over næse og mund uden at stramme for meget. Efter montering skal du fjerne masken og lægge den til side til senere, og efterlade stropperne bag motivets hoved.Placer derefter to pulsoximetre på begge pegefingre for kontinuerligt at overvåge hjertefrekvens og iltmætning i blodet under undersøgelsen. Placer MR-kompatible hovedtelefoner over motivets ører. Flyt MR-scannerbordet ind i magnetboringen, så forsøgspersonens lunger er placeret i midten af synsfeltet.

Research

JoVE Journal

Medicine

Patient Preparation and Subject Training for Hyperpolarized Xenon MRI

Quantitative Measure of Lung Structure and Function Obtained from Hyperpolarized Xenon Spectroscopy

Hyperpolarized Xenon-129 (HXe) magnetic resonance imaging (MRI) provides tools for obtaining 2- or 3-dimensional maps of lung ventilation patterns, gas ...

Polarizing Xenon-129 for Hyperpolarized Xenon Spectroscopy

Polariserende Xenon-129 til hyperpolariseret xenonspektroskopi

Performing Hyperpolarized Xenon-129 Inhalation for Chemical Shift Saturation Recovery (CSSR) Measurement

Udførelse af hyperpolariseret Xenon-129-indånding til CSSR-måling (Chemical Shift Saturation Recovery)