patient preparation and subject training for hyperpolarized xenon mri

Beurteilung der Lungenfunktion mit hyperpolarisierter Xenon-129-MRT

Hyperpolarized Xenon-129 (HXe) magnetic resonance imaging (MRI)1 is a technique that offers unique insights into lung structure, function, and gas exchange processes. By dramatically amplifying the magnetization of Xenon gas through spin-exchange optical pumping, HXe MRI achieves an order-of-magnitude improvement in signal-to-noise ratio compared to thermally polarized Xenon MRI2,3,4,5,6. This hyperpolarization enables the direct visualization and quantification of Xenon gas uptake into lung tissue and blood, which would otherwise be undetectable with conventional thermally polarized MRI7.
Chemical shift saturation recovery (CSSR) MR spectroscopy8,9,10,11,12,13 has proven to be one of the most valuable HXe MRI techniques. CSSR involves selectively saturating the magnetization of Xenon dissolved in lung tissue and blood using frequency-specific radiofrequency (RF) pulses. The subsequent recovery of the dissolved-phase (DP) signal as it exchanges with fresh hyperpolarized Xenon gas in the airspaces on a timescale of ms offers important functional information about the lung parenchyma.
Since its development in the early 2000s, the techniques behind CSSR spectroscopy have been progressively refined14,15,16,17,18,19,20,21,22,23. Further, advances in modeling Xenon uptake curves have enabled the extraction of specific physiological parameters, such as alveolar wall thickness and pulmonary transit times10,24,25,26. Studies have shown CSSR&#39;s sensitivity to subtle changes in lung microstructure and gas exchange efficiency in the form of pulmonary abnormalities found in clinically healthy smokers27, as well as in a range of lung diseases, including chronic obstructive pulmonary disease (COPD)18,27,28, fibrosis29, and radiation-induced lung injury30,31. CSSR spectroscopy has also been demonstrated to be sensitive to detect oscillations in the DP signal corresponding to pulsatile blood flow during the cardiac cycle32.
While significant progress has been made, practical challenges remain in implementing CSSR spectroscopy on clinical MRI systems. Scan times requiring single-dose breath holds approaching 10 s may be too long for pediatric subjects33,34 or patients with severe lung disease35,36. Additionally, the technique is susceptible to measurement biases if acquisition parameters such as the order of the saturation delay times or the efficacy of the dissolved-phase saturation are not properly optimized21. To address these limitations and make CSSR more accessible to the broader research community, clear, step-by-step protocols for both conventional breath hold and free-breathing acquisitions, currently under development, are needed.
The objective of this paper is to present a detailed methodology for performing optimized CSSR MR spectroscopy using HXe gas. The protocol will cover polarization and delivery of the Xenon gas, RF pulse calibration, sequence parameter selection, subject preparation, data acquisition, and key steps in data analysis. Examples of experimental results will be provided. It is hoped that this comprehensive guide will serve as a foundation for CSSR implementations across sites and help realize the full potential of this technique for quantifying lung microstructural changes in a range of pulmonary diseases.

Autor im Rampenlicht: Weiterentwicklung der Lungenkrankheitsforschung mit frei atmender hyperpolarisierter Xenon-129-MRT

Quantitatives Maß für die Lungenstruktur und -funktion aus der hyperpolarisierten Xenon-Spektroskopie

Our research focuses on using hyperpolarizing on 129 MRI technology to assess pulmonary function and to investigate lung diseases. The main objective is to see how this imaging technique can lead to better detection, understanding, and tracking of different lung conditions. Most hyperpolarized lung MR imaging is performed during a breath hold.We believe that pulmonary function quantified under such an artificial condition, may not fully reflect gas exchange during regular respiration, and we are testing new free breathing measurements that do not require any breath hold. Current challenges include the optimization of the CSSR acquisition technique for consistency and accuracy in the face of physiological variation and patient compliance. Severely ill or pediatric patients struggle with maintaining lengthy breath holds.The CSSR heart technique appears particularly sensitive to changes in alveolar septal wall thickness. As we and others in the field of demonstrated, alveolar wall thickening can indicate the presence of interstitial edema, inflammation, or pulmonary fibrosis. All metrics derived from CSSR spectroscopy acquisitions are currently based on the temporal dynamics of the signal amplitudes.In the future though, we hope to include changes in peak shape and center frequency in the analysis to obtain a more complete picture of the ongoing gas exchange processes.

Patientenvorbereitung und Probandentraining für die hyperpolarisierte Xenon-MRT

Richten Sie zunächst das physiologische Überwachungssystem so ein, dass es Atemkurven und Echtzeit-Gasanalysen während der Bildgebung aufzeichnet. Schließen Sie die MRT-Raumkopfhörer an und testen Sie sie mit dem Audiosignal, das den Probanden mithilfe einer Ein- und Ausatmungs-Audioaufzeichnung leitet. Passen Sie die Wiedergabegeschwindigkeit der Audiospur an. Einatmen.Ausatmen.Basierend auf der normalen Atemfrequenz jedes Probanden. Bereiten Sie als Nächstes das Scannerbett mit einer sauberen Kopfstütze, einem Beinstützkissen und einer Decke vor. Legen Sie die gelöste Xenon 129 Brustwestenspule auf den Tisch des MRT-Scanners und stecken Sie den Anschlussstecker der Spule ein.Für eine freie Atemuntersuchung führen Sie den Probanden in die Ein- und Ausatmen-Sprachaufzeichnung ein, um während der Bildgebung eine synchronisierte Atmung zu ermöglichen. Führen Sie den Probanden in den MRT-Raum und positionieren Sie ihn auf dem Scannerbett, während er auf der offenen Xenonwestenspule liegt. Sobald die Person positioniert ist, befestigen Sie die Velcro-Gurte so, dass die Westenspirale geschlossen ist, aber die Brust der Person nicht einengt.Für eine freie Atemuntersuchung legen Sie eine Gesichtsmaske mit einem Pneumatac über das Gesicht des Patienten. Ziehen Sie die Bänder fest, so dass die Maske eng an Nase und Mund anliegt, ohne zu eng zu sein. Entfernen Sie die Maske nach der Anpassung und legen Sie sie für später beiseite, wobei Sie die Bänder hinter dem Kopf des Motivs lassen.Platzieren Sie dann zwei Pulsoximeter an beiden Zeigefingern, um die Herzfrequenz und die Blutsauerstoffsättigung während der Studie kontinuierlich zu überwachen. Setzen Sie MRT-kompatible Kopfhörer über die Ohren des Probanden. Schieben Sie den MRT-Scannertisch in die Magnetbohrung, sodass die Lungen des Probanden in der Mitte des Sichtfelds positioniert sind.

Research

JoVE Journal

Medicine

Patient Preparation and Subject Training for Hyperpolarized Xenon MRI

Quantitative Measure of Lung Structure and Function Obtained from Hyperpolarized Xenon Spectroscopy

Hyperpolarized Xenon-129 (HXe) magnetic resonance imaging (MRI) provides tools for obtaining 2- or 3-dimensional maps of lung ventilation patterns, gas ...

Forschung

Medizin

Polarizing Xenon-129 for Hyperpolarized Xenon Spectroscopy

Polarisierendes Xenon-129 für die hyperpolarisierte Xenon-Spektroskopie

Performing Hyperpolarized Xenon-129 Inhalation for Chemical Shift Saturation Recovery (CSSR) Measurement

Durchführung einer hyperpolarisierten Xenon-129-Inhalation für die Messung der chemischen Sättigungswiederherstellung (CSSR)