Name: reverse total shoulder arthroplasty
Uploaded: 2011-07-05T12:00:00
Description: Watch this Scientific Journal Video about Reverse Total Shoulder Arthroplasty at JoVE.com

：この手順は、均等の詳細な情報についてはTornier株式会社を参照してくださいTornier社による補綴物の総肩を逆用いて行った<a href="http://www.tornier-us.com/">http://www.tornier-us.com/</a> 。

1。はじめに： 肩甲上腕関節は複雑な関節です。それは、最小限の骨の制約があり、正常な機能のための軟組織を支えるとの間の緊張の複雑なバランスに依存しています。この本質的な関係は、肩の動きの大きな機能的な範囲を持つことができます。このバランスが非結合されている場合、機能障害の程度の差が発生します。このような大規模な涙のような腱板の機能の?...

<ol>
	<li>Boileau, P., Sinnerton, R. J., Choinard, C., Walch, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Arthroplasty+of+the+Shoulder.">Arthroplasty of the Shoulder.</a> J Bone Joint Surgery Br. 88, 562-575 (2006).</li><li>Boileau, P., Watkinson, D., Hatzidakis, A. M., Hovorka, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Neer+Award+2005:+The+Grammont+reverse+shoulder+prosthesis:results+in+cuff+tear+arthritis,+fracture+sequelae,+and+revision+arthroplasty.">Neer Award 2005: The Grammont reverse shoulder prosthesis:results in cuff tear arthritis, fracture sequelae, and revision arthroplasty.</a> J Shoulder Elbow Surg. 15, 527-540 (2006).</li><li>Boileau, P., Watkinson, D. J., Hatzidakis, A. M., Balg, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Grammont+reverse+prosthesis:+design,+rationale,+and+biomechanics.">Grammont reverse prosthesis: design, rationale, and biomechanics.</a> J Shoulder Elbow Surg. 14, 147S-161S (2005).</li><li>Cuff, D., Pupello, D., Virani, N., Levy, J., Frankle, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reverse+shoulder+arthroplasty+for+the+treatment+of+rotator+cuff+deficiency.">Reverse shoulder arthroplasty for the treatment of rotator cuff deficiency.</a> J Bone Joint Surg Am. 90, 1244-1251 (2008).</li><li>Edwards, T. B., Boulahia, A., Kempf, J. F., Boileau, P., Nemoz, C., Walch, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+influence+of+rotator+cuff+disease+on+the+results+of+shoulder+arthroplasty+for+primary+osteoarthritis:+results+of+a+multicenter+study.">The influence of rotator cuff disease on the results of shoulder arthroplasty for primary osteoarthritis: results of a multicenter study.</a> J Bone Joint Surg Am. 84, 2240-2248 (2002).</li><li>Frankle, M., Siegal, S., Pupelo, D., Saleem, A., Mighell, M., Vasey, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=There+reverse+shoulder+prosthesis+for+glenohumeral+arthritis+associated+with+severe+rotator+cuff+deficiency.+A+minimum+two-year+follow-up+study+of+sixty+patients.">There reverse shoulder prosthesis for glenohumeral arthritis associated with severe rotator cuff deficiency. A minimum two-year follow-up study of sixty patients.</a> J Bone Joint Surg Am. 87, 1697-1705 (2005).</li><li>Guery, J., Favard, L., Sirveaux, F., Oudet, D., Mole, D., Walch, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reverse+total+shoulder+arthroplasty.+Survivorship+analysis+of+eighty+replacements+followed+for+five+to+ten+years.">Reverse total shoulder arthroplasty. Survivorship analysis of eighty replacements followed for five to ten years.</a> J Bone Joint Surg Am. 88, 1742-1747 (2006).</li><li>Martin, T. G., Lanotti, J. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reverse+total+shoulder+arthroplasty+for+acute+fractures+and+failed+management+after+proximal+humerus+fractures.">Reverse total shoulder arthroplasty for acute fractures and failed management after proximal humerus fractures.</a> Orthop Clin North Am. 39, 451-457 (2008).</li><li>Wall, B., Nove-Josserand, L., O'Conner, D. P., Edwards, T. B., Walch, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reverse+total+shoulder+arthroplasty:+a+review+of+results+according+to+etiology.">Reverse total shoulder arthroplasty: a review of results according to etiology.</a> J Bone Joint Surg Am. 89, 1476-1485 (2007).</li><li>Werner, C. M., Steinmann, P. A., Gilbart, M., Gerber, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Treatment+of+painful+pseudoparesis+due+to+irreparable+rotator+cuff+dysfunction+with+the+delta+III+reverse-ball-and-socket+total+shoulder+prosthesis.">Treatment of painful pseudoparesis due to irreparable rotator cuff dysfunction with the delta III reverse-ball-and-socket total shoulder prosthesis.</a> J Bone Joint Surg Am. 87, 1476-1486 (2005).</li></ol>

回旋腱板関節症のためのRTSAを使用すると、痛みの大幅な改善、運動と機能的転帰のスコアの範囲を提供します。全体的な患者の満足度は、現在の文学の百分の80から95の範囲であったしました。すべてのプロシージャと同様に、RTSAは、リスクがないわけではありません。合併症の初期の報告では60％にもなった。技術が向上したとして、合併症発生率は減少している。

<table border="1"><tbody><tr><td> 試薬の名前 </td><td> 会社 </td><td> カタログ番号 </td><td> コメント </td></tr><tr><td>均等のは、肩を逆</td><td> Tornier、（株） </td><td>なし</td><td>より多くの情報訪問のための<a href="http://www.tornier-us.com/">http://www.tornier-us.com/</a> </td></tr></tbody></table>

reverse total shoulder arthroplasty

逆合計肩関節形成術は、最初は回旋腱板関節症での使用を承認され、よく腱移行術の再建のための適切ではなかった患者の関節炎のない慢性pseudoparalysisとしてれました。これらの患者のための伝統的な手術のオプションは限られていたと機能的な結果はサブ最適と時間に壊滅的でした。逆肩関節形成術の使用が効果的にこれらの患者の機能を復元し、それらの疾患に伴う症状を軽減することが判明している。手順は、次の2つのアプローチ、deltopectoralまたは上外側で行うことができます。補綴物の使用に伴う合併症の率が得ている経験と低い傾向より多くの最近の報告で80から60パーセントの範囲であったしました。プロテーゼ失敗した逆の肩のためのオプションが限られており、しばしば重要な関連する障害を持って復旧させてください。このプロテーゼの使用のための適応は、リビジョンの関節形成術、上腕骨近位端骨折や腫瘍のためのその使用を含めて評価され続けている。慎重な患者選択が原因プロシージャに関連付けられている重大なリスクの不可欠です。

Watch this Scientific Journal Video about Reverse Total Shoulder Arthroplasty at JoVE.com

Reverse Total Shoulder Arthroplasty

逆合計肩関節形成術は、従来の人工関節置換術または他のプロシージャで処理することができない状態の治療に使用されています。これらは主に肩の正常な生体力学カップリングの回復不能な腱板と損失と変性としなくなる条件が含まれています。

全肩​​関節形成術を逆に

Reverse total shoulder arthroplasty was initially approved for use in rotator cuff arthropathy and well as chronic pseudoparalysis without arthritis in ...

Research

JoVE Journal

Medicine

Implantation of the Syncardia Total Artificial Heart

With advances in technology, the use of mechanical circulatory support devices for end stage heart failure has rapidly increased. The vast majority of such patients are generally well served by left ventricular assist devices (LVADs). However, a subset of patients with late stage biventricular failure or other significant anatomic lesions are not adequately treated by isolated left ventricular mechanical support. Examples of concomitant cardiac pathology that may be better treated by resection and TAH replacement includes: post infarction ventricular septal defect,&#160;aortic root aneurysm / dissection, cardiac allograft failure, massive ventricular thrombus, refractory malignant arrhythmias (independent of filling pressures), hypertrophic / restrictive cardiomyopathy, and complex congenital heart disease. Patients often present with cardiogenic shock and multi system organ dysfunction. Excision of both ventricles and orthotopic replacement with a total artificial heart (TAH) is an effective, albeit extreme, therapy for rapid restoration of blood flow and resuscitation. Perioperative management is focused on end organ resuscitation and physical rehabilitation. In addition to the usual concerns of infection, bleeding, and thromboembolism common to all mechanically supported patients, TAH patients face unique risks with regard to renal failure and anemia. Supplementation of the abrupt decrease in brain natriuretic peptide following ventriculectomy appears to have protective renal effects. Anemia following TAH implantation can be profound and persistent. Nonetheless, the anemia is generally well tolerated and transfusion are limited to avoid HLA sensitization. Until recently, TAH patients were confined as inpatients tethered to a 500 lb pneumatic console driver. Recent introduction of a backpack sized portable driver (currently under clinical trial) has enabled patients to be discharged home and even return to work. Despite the profound presentation of these sick patients, there is a 79-87% success in bridge to transplantation.

The purpose of this manuscript is to briefly review indications, management, and outcomes for the total artificial heart. Video operative techniques for device implantation are presented.

Syncardia完全人工心臓の植え込み

With advances in technology, the use of mechanical circulatory support devices for end stage heart failure has rapidly increased. The vast majority of ...

医学

Novel Diagnostics in Revision Arthroplasty: Implant Sonication and Multiplex Polymerase Chain Reaction

In orthopedic patients, foreign body-associated infections, especially periprosthetic joint infections (PJIs), are a devastating complication of arthroplasty. Infection requires complex treatment, may result in long hospitalization and causes considerable costs. Multiple surgical revisions can be necessary in these patients, with a loss in function as well as in quality of life.
The routine preoperative diagnostics include blood examination for C-reactive protein (CRP) and other biomarkers, as well as joint aspirate analysis for cell count, differentiation, and culture. Intraoperative specimens for histology and microbiology are also standard procedure. The microbiological examination of removed implants with sonication, in combination with the implementation of molecular biology techniques in microbiology, represent two novel techniques currently employed to enhance the differential diagnostics of PJI.
We present here the step-wise procedure of analyzing joint aspirate and sonication fluid, using a cartridge-based multiplex polymerase chain reaction (PCR) system. Results were matched against conventional cultures and consensus criteria for PJI. Conventional microbiological cultures from tissue biopsies, joint aspirate and sonication fluid showed a sensitivity of 66.7%, 66.7%, and 88.9%, respectively, and a specificity of 82.3%, 54.6%, and 61.5%, respectively. The PCR diagnostic of the sonication fluid and the joint fluid showed a sensitivity of 50.0% and 55.6%, respectively, and both a specificity of 100.0%. Both PCR diagnostics combined had a sensitivity of 66.7% and a specificity of 100.0%. The multiplex PCR therefore presents a rapid diagnostic tool with moderate sensitivity but high specificity in diagnosing PJI.

Differential diagnostics in painful arthroplasty is crucial for treatment success. Joint aspiration is routinely performed preoperatively. Multiplex polymerase chain reaction of the joint aspirate and the sonication fluid, a feasible tool for quick pathogen detection from these samples is described.

リビジョン人工で新規診断: 超音波処理と多重ポリメラーゼの連鎖反応のインプラント

In orthopedic patients, foreign body-associated infections, especially periprosthetic joint infections (PJIs), are a devastating complication of ...

Individualized Stem-positioning in Calcar-guided Short-stem Total Hip Arthroplasty

Bone- and soft-tissue sparing short stems are increasingly used in total hip arthroplasty (THA). However, there are a large variety of models of short stems, differing in design and function. Calcar-guided short stems provide an anatomical curvature in the medial calcar region, thus, positioning is done individually alongside the calcar in the "round-the-corner" technique. Depending on the level of the neck's osteotomy, stems can be aligned individually in a large bandwidth of varus- and valgus anatomies. This differs from conventional total hip arthroplasty and potentially includes a severe learning curve. Given that a great variety of caput-collum-diaphyseal (CCD)-angles can be retained, the reconstruction of femoro-acetabular offsets can be achieved precisely. However, particularly extensive varus- and valgus positioning has raised concerns in regard to stability and bone remodeling. The purpose of the present manuscript is to showcase the implantation technique in calcar-guided short-stem THA and to summarize short-term clinical and radiological results.

This protocol describes the round-the-corner technique and the individualized stem-positioning of calcar-guided short stems alongside the medial calcar, depending on the level of the osteotomy. This differs from conventional total hip arthroplasty and includes a learning curve.

個別のカルカル誘導短幹人工股関節のステム位置決め

Bone- and soft-tissue sparing short stems are increasingly used in total hip arthroplasty (THA). However, there are a large variety of models of short ...

Studying Left Ventricular Reverse Remodeling by Aortic Debanding in Rodents

To better understand the left ventricular (LV) reverse remodeling (RR), we describe a rodent model wherein, after aortic banding-induced LV remodeling, mice undergo RR upon removal of the aortic constriction. In this paper, we describe a step-by-step procedure to perform a minimally invasive surgical aortic debanding in mice. Echocardiography was subsequently used to assess the degree of cardiac hypertrophy and dysfunction during LV remodeling and RR and to determine the best timing for aortic debanding. At the end of the protocol, terminal hemodynamic evaluation of the cardiac function was conducted, and samples were collected for histological studies. We showed that debanding is associated with surgical survival rates of 70-80%. Moreover, two weeks after debanding, the significant reduction of ventricular afterload triggers the regression of ventricular hypertrophy (~20%) and fibrosis (~26%), recovery of diastolic dysfunction as assessed by the normalization of left ventricular filling and end-diastolic pressures (E/e&#39;&#160;and LVEDP). Aortic debanding is a useful experimental model to study LV RR in rodents. The extent of myocardial recovery is variable between subjects, therefore, mimicking the diversity of RR that occurs in the clinical context, such as aortic valve replacement. We conclude that the aortic banding/debanding model represents a valuable tool to unravel novel insights into the mechanisms of RR, namely the regression of cardiac hypertrophy and the recovery of diastolic dysfunction.

Here we describe a step-by-step protocol of surgical aorta debanding in the well-established mice model of aortic-constriction. This procedure not only allows studying the mechanisms underlying the left ventricular reverse remodeling and regression of hypertrophy but also to test novel therapeutic options that might accelerate myocardial recovery.

げっ歯類における大動脈デベンディングによる左心室逆改造の研究

To better understand the left ventricular (LV) reverse remodeling (RR), we describe a rodent model wherein, after aortic banding-induced LV remodeling, ...

The Use of Mixed Reality in Custom-Made Revision Hip Arthroplasty: A First Case Report

The technology of 3D printing and visualization of anatomical structures is rapidly growing in various fields of medicine. A custom-made implant and mixed reality were used to perform complex revision hip arthroplasty in January 2019. The use of mixed reality allowed for a very good visualization of the structures and resulted in precise implant fixation. According to the authors' knowledge, this is the first described case report of the combined use of these two innovations. The diagnosis preceding the qualification for the procedure was the loosening of the left hip's acetabular component. Mixed reality headset and holograms prepared by engineers were used during the surgery. The operation was successful, and it was followed by early verticalization and patient rehabilitation. The team sees opportunities for technology development in joint arthroplasty, trauma, and orthopedic oncology.

A complex revision hip arthroplasty was performed using a custom-made implant and mixed reality technology. According to the authors&#39; knowledge, this is the first report of such procedure described in the literature.

カスタムメイドの修正人工股関節形成術における複合現実感の使用:最初の症例報告

The technology of 3D printing and visualization of anatomical structures is rapidly growing in various fields of medicine. A custom-made implant and mixed ...

In Vitro Application of a Wireless Sensor in Flexion-Extension Gap Balance of Unicompartmental Knee Arthroplasty

Unicompartmental knee arthroplasty (UKA) is an effective treatment for end-stage anteromedial osteoarthritis (AMOA). The key to UKA is the flexion-extension gap balance, which is closely related to postoperative complications such as bearing dislocation, bearing wear, and arthritis progression. The traditional gap balance assessment is performed by indirectly sensing the tension of the medial collateral ligament by a gap gauge. It relies on the surgeon's feel and experience, which is imprecise and difficult for beginners. To accurately assess the flexion-extension gap balance of UKA, we developed a wireless sensor combination consisting of a metal base, a pressure sensor, and a cushion block. After osteotomy, the insertion of a wireless sensor combination allows the real-time measurement of intra-articular pressure. It accurately quantifies the flexion-extension gap balance parameters to guide further femur grinding and tibia osteotomy, to improve the accuracy of gap balance. We conducted an in vitro experiment with the wireless sensor combination. the results showed that there was a difference of 11.3 N after applying the traditional method of flexion-extension gap balance performed by an experienced expert.

In Vitro Application of a Wireless Sensor in Flexion-Extension Gap Balance of Unicompartmental Knee Arthroplasty

This protocol presents a cadaveric study of a wireless sensor used in medial unicompartmental knee arthroplasty. The protocol includes the installation of an angle measuring device, standardized Oxford unicompartmental knee arthroplasty osteotomy, preliminary assessment of flexion-extension balance, and application of the sensor to measure flexion-extension gap pressure.

インビトロ 単一区画型膝関節形成術の屈曲-伸展ギャップバランスにおける無線センサの応用

Unicompartmental knee arthroplasty (UKA) is an effective treatment for end-stage anteromedial osteoarthritis (AMOA). The key to UKA is the ...

ラットモデルにおける五十肩のためのTuina療法

Tuina in a Frozen Shoulder Rat Model: An Efficient and Reproducible Protocol

Frozen shoulder (FS) is a common condition with no defined optimal therapy. Tuina therapy, a traditional Chinese medicine (TCM) technique used to treat FS patients in Chinese hospitals, has demonstrated excellent results, but its mechanisms are not fully understood. Building on a previous study, this work aimed to develop a Tuina protocol for an FS rat model. We randomly divided 20 SD rats into control (C; n = 5), FS model (M; n = 5), FS model Tuina treatment (MT; n = 5), and FS model oral treatment (MO; n = 5) groups. This study used the cast immobilization method to establish the FS rat model. The effect of Tuina and oral dexamethasone on the glenohumeral range of motion (ROM) was evaluated, and the histological findings were assessed. Our study showed that Tuina and oral dexamethasone were able to improve shoulder active ROM and preserve the structure of the capsule, with Tuina therapy proving to be more effective than oral dexamethasone. In conclusion, the Tuina protocol established in this study was highly effective for FS.

著者スポットライト:五十肩に対するTuina療法の有効性の調査 

This study develops an efficient and reproducible Tuina protocol for treating frozen shoulder established in a rat model. This approach will help to study the Tuina therapy treatment method for frozen shoulders.

凍結肩甲ラットモデルの推拿:効率的で再現性のあるプロトコル

Frozen shoulder (FS) is a common condition with no defined optimal therapy. Tuina therapy, a traditional Chinese medicine (TCM) technique used to treat FS ...

五十肩の治療におけるスモールニードルナイフ療法の治療効果

Clinical Efficacy of Small Needle Knife Therapy on Stage I-II Frozen Shoulder

Frozen shoulder is a kind of aseptic inflammatory disease of the shoulder caused by strain, trauma, and other reasons, resulting in shoulder joint pain and limited function. The protocol presented here demonstrates the operation of a small needle knife in treating frozen shoulders, including patient management, material preparation, positioning, operation, and postoperative care. The purpose of this protocol is to relieve the pain and functional limitations and improve the living ability of patients with frozen shoulders. In our study, 76 stage I-II frozen shoulder patients who met the inclusion criteria were randomly divided into a control group and a treatment group (n=38). Patients in the control group received functional exercise, while the treatment group received small needle knife therapy with functional exercise. The visual analogue scores (VAS), the Constant and Murley scores (CMS), and the thickness of the coracohumeral ligament (CHL) under ultrasound were evaluated. After small needle knife therapy, the VAS score was significantly lower in the treatment group (5.11 &plusmn; 0.89) than in the control group (5.49 &plusmn; 0.65; t=-2.065, p&lt;0.05); the CMS score was significantly higher in the treatment group (64.72 &plusmn; 4.78) than in the control group (60.97 &plusmn; 6.00; t=2.947, p&lt;0.05); the CHL thickness was significantly decreased in the treatment group (2.38 &plusmn; 0.36) than in the control group (2.57 &plusmn; 0.42; t=-2.117, p&lt;0.05). These results indicate that the small needle knife significantly relieved the pain symptoms, improved the shoulder function, reduced the CHL thickness, and improved the quality of life and, therefore, had significant therapeutic efficacy in stage I-II frozen shoulder patients.

著者スポットライト:小さな針ナイフ療法による五十肩の治療 

The protocol presented here describes the detailed operation method and proves the effectiveness of a small needle knife in the treatment of frozen shoulders.

ステージI-IIの五十肩に対する小針ナイフ療法の臨床効果

Frozen shoulder is a kind of aseptic inflammatory disease of the shoulder caused by strain, trauma, and other reasons, resulting in shoulder joint pain ...

全肩​​関節形成術を逆に

全肩関節形成術を逆に