Name: microfluidic chips controlled with elastomeric microvalve arrays
Uploaded: 2007-10-01T00:00:00
Description: Watch this Scientific Journal Video about Microfluidic Chips Controlled with Elastomeric Microvalve Arrays at JoVE.com

<p class="jove_content">This work was supported by the National Institute of Biomedical Imaging and Bioengineering grant #EB003307 and by the National Science Foundation Career Award to A.F.</p>

<p class="jove_title">Microfluidic device design using CorelDraw or AutoCAD software</p>
<p class="jove_content"><strong>Principle of PDMS microvalves-based devices:</strong> The devices consist of three layers: a fluidic layer containing microchambers of various sizes, a "control layer" containing the microchannels necessary to actuate the fluidic path with microvalves, and a middle thin PDMS membrane that is bound to the control layer. At rest, due to the compliance and hydrophobicity of PDMS, the membrane seals (reversibly) against its seat,...

<ol>
	<li>Li, N., Hsu, C. H., Folch, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Parallel+mixing+of+photolithographically-defined+nanoliter+volumes+using+elastomeric+microvalve+arrays.">Parallel mixing of photolithographically-defined nanoliter volumes using elastomeric microvalve arrays.</a> <em style='font-style: italic'>Electrophoresis</em>. <b>26</b> (19), 3858-3864 (2005).</li><li>Thorsen, T., Maerkl, S. J., Quake, S. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microfluidic+large-scale+integration.">Microfluidic large-scale integration.</a> <em style='font-style: italic'>Science</em>. <b>298</b> (5593), 580-584 (2002).</li></ol>

<p class="jove_content">Main advantages of our microvalve design:</p>
<ol>
<li>No extra energy source is required to close the fluidic path, hence the loaded device is highly portable; and</li>
<li>The device can be built by PDMS replicas from photolithographically-patterned SU-8 molds, allowing for microfabricating deep (up to 1 mm) channels with vertical sidewalls (i.e. the height of the features can be specified independently of their width) and resulting in very precise features.</li>
</ol>
<p class="jove_content">Advantages of the par...

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>Clean silicon wafers</td>
<td>Supplies</td>
<td>Silicon Sense Inc.</td>
<td>3P0110TEST</td>
<td>3-inch diameter, P/Boron</td>
</tr>
<tr>
<td>"Master" wafers containing SU-8 patterns</td>
<td>Supplies</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>Fabricated in house using standard photolithography procedures </td>
</tr>
<tr>
<td>Desiccators (2)</td>
<td>Equipment</td>
<td>VWR</td>
<td>24987-048</td>
<td>One for silanization, one for PDMS de-bubbling.</td>
</tr>
<tr>
<td>Balance</td>
<td>Equipment</td>
<td>OHAUS Corp.</td>
<td>SC6010</td>
<td>&nbsp;</td>
<tr>
<td>Oven</td>
<td>Equipment</td>
<td>Sheldon Mfg. Inc.</td>
<td>1330GM</td>
<td>&nbsp;</td>
<tr>
<td>MiniVortexer</td>
<td>Equipment</td>
<td>VWR</td>
<td>58816-121</td>
<td>&nbsp;</td>
<tr>
<td>Spinner</td>
<td>Equipment</td>
<td>Headway Research Inc.</td>
<td>PWM32</td>
<td>&nbsp;</td>
<tr>
<td>Plasma etcher</td>
<td>Equipment</td>
<td>Plasmatic Systems Inc. </td>
<td>Plasma Preen II-973</td>
<td>&nbsp;</td>
<tr>
<td>Hot Plate</td>
<td>Equipment</td>
<td>Torre Pines Scientific</td>
<td>HP30A</td>
<td>&nbsp;</td>
<tr>
<td>Stereoscope</td>
<td>Microscope</td>
<td>Nikon</td>
<td>TMZ1500</td>
<td>&nbsp;</td>
<tr>
<td>CCD camera</td>
<td>Equipment</td>
<td>Diagnostic Instruments</td>
<td>SPOT RT</td>
<td>&nbsp;</td>
<tr>
<td>Solenoid valves</td>
<td>Equipment</td>
<td>Lee Company</td>
<td>LHDA0511111H</td>
<td>&nbsp;</td>
<tr>
<td>Data acquisition board</td>
<td>Hardware</td>
<td>National Instruments</td>
<td>PCI 6025E, CB-50LP</td>
<td>&nbsp;</td>
<tr>
<td>LabView</td>
<td>Software</td>
<td>National Instruments</td>
<td>Version 8.0</td>
<td>&nbsp;</td>
<tr>
<td>Tridecafluoro-1,1,2,2,-tetrahydrooctyl)-1-trichlorosilane</td>
<td>Reagent</td>
<td>United Chemical Technologies</td>
<td>T2492</td>
<td>Silanization must be done in a chemical fume hood.</td>
</tr>
<tr>
<td>PDMS prepolymer and crosslinker</td>
<td>Reagent</td>
<td>Dow-Corning</td>
<td>Sylgard 184</td>
<td>&nbsp;</td>
<tr>
<td>Hexane</td>
<td>Reagent</td>
<td>EMD	</td>
<td>HX0295-6	</td>
<td>

</td>
</tr>
<tr>
<td>Color Dyes</td>
<td>Reagent</td>
<td>Spectrum Chemical Mfg. Corp.</td>
<td>FD&C 110, 135, 150</td>
<td>Blue #1, Yellow #5, Red #3. 
</td>
</tr>
<tr>
<td>3 ml disposable transfer pipets</td>
<td>Supplies</td>
<td>Fisher Scientific</td>
<td>13-711-20</td>
<td>&nbsp;</td>
<tr>
<td>Kimwipes</td>
<td>Supplies</td>
<td>Kimberly-Clark</td>
<td>34155</td>
<td>



</td>
</tr>
<tr>
<td>Weighing boats</td>
<td>Supplies</td>
<td>VWR </td>
<td>12577-027</td>
<td>




</td>
</tr>
<tr>
<td>Tongue depressor</td>
<td>Supplies	</td>
<td>Fisher Scientific	</td>
<td>11-700-555	</td>
<td>&nbsp;</td>
<tr>
<td>P100 dishes</td>
<td>Supplies</td>
<td>Fisher Scientific</td>
<td>08-772E</td>
<td>		</td>
</tr>
<tr>
<td>Silicone tubing (1.14 mm inner diameter (I.D.))</td>
<td>Supplies	</td>
<td>Cole-Palmer Instrument Co.</td>
<td>07625-30</td>
<td>&nbsp;</td>
<tr>
<td>Tygon tubing (O.D. 1/16 in; I.D. 1/32 in)</td>
<td>Supplies	</td>
<td>Cole-Palmer Instrument Co.	</td>
<td>06418-02</td>
<td>&nbsp;</td>
<tr>
<td>Duco Cement</td>
<td>Supplies</td>
<td>Devcon</td>
<td>6245</td>
<td>



</td>
</tr>
<tr>
<td>Razor blade</td>
<td>Tools</td>
<td>VWR</td>
<td>55411-050</td>
<td>



</td>
</tr>
<tr>
<td>Needles</td>
<td>Tools</td>
<td>Fisher Scientific</td>
<td>0053482 (25 Gauge)</td>
<td>




</td>
</tr>
<tr>
<td>#5 Forceps</td>
<td>Tools</td>
<td>Fine Science Tools</td>
<td>11251-20</td>
<td>



</td>
</tr>
<tr>
<td>50 ml centrifuge tube</td>
<td>Supplies</td>
<td>Fisher Scientific</td>
<td>05-526B</td>
<td>




</td>
</tr>
<tr>
<td>Seal wrap film</td>
<td>Supplies	</td>
<td>AEP Industries Inc.	</td>
<td>0153877</td>
<td>&nbsp;</td>
<tr>
<td>1.5 ml microcentrifuge tubes</td>
<td>Supplies</td>
<td>Fisher Scientific</td>
<td>05-406-16</td>
<td>




</td>
</tr>
<tr>
<td>15 ml centrifuge tubes	</td>
<td>Supplies	</td>
<td>BD Falcon	</td>
<td>352097</td>
<td>&nbsp;</td>
<tr>
<td>Purple nitrile power-free gloves</td>
<td>Supplies 	</td>
<td>VWR 	</td>
<td>40101-348</td>
<td>&nbsp;</td>
<tr>
<td>1.2 mm Harris biopsy punch	</td>
<td>Tools</td>
<td>Ted Pella, Inc.</td>
<td>15074	</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>
	

microfluidic chips controlled with elastomeric microvalve arrays

<p class="jove_content">Miniaturized microfluidic systems provide simple and effective solutions for low-cost point-of-care diagnostics and high-throughput biomedical assays.  Robust flow control and precise fluidic volumes are two critical requirements for these applications.  We have developed microfluidic chips featuring elastomeric polydimethylsiloxane (PDMS) microvalve arrays that: 1) need no extra energy source to close the fluidic path, hence the loaded device is highly portable; and 2) allow for microfabricating deep (up to 1 mm) channels with vertical sidewalls and resulting in very precise features.</p>

<p class="jove_content">The PDMS microvalves-based devices consist of three layers: a fluidic layer containing fluidic paths and microchambers of various sizes, a control layer  containing the microchannels necessary to actuate the fluidic path with microvalves, and a middle thin PDMS membrane that is bound to the control layer.  Fluidic layer and control layers are made by replica molding of PDMS from SU-8 photoresist masters, and the thin PDMS membrane is made by spinning PDMS at specified heights. The control layer is bonded to the thin PDMS membrane after oxygen activation of both, and then assembled with the fluidic layer. The microvalves are closed at rest and can be opened by applying negative pressure (e.g., house vacuum). Microvalve closure and opening are automated via solenoid valves controlled by computer software.</p>

<p class="jove_content">Here, we demonstrate two microvalve-based microfluidic chips for two different applications. The first chip allows for storing and mixing precise sub-nanoliter volumes of aqueous solutions at various mixing ratios.  The second chip allows for computer-controlled perfusion of microfluidic cell cultures.</p>

<p class="jove_content">The devices are easy to fabricate and simple to control.  Due to the biocompatibility of PDMS, these microchips could have broad applications in miniaturized diagnostic assays as well as basic cell biology studies.</p>

Watch this Scientific Journal Video about Microfluidic Chips Controlled with Elastomeric Microvalve Arrays at JoVE.com

Microfluidic Chips Controlled with Elastomeric Microvalve Arrays

<p class="jove_content">We demonstrate protocols for manufacturing and automating elastomeric polydimethylsiloxane (PDMS)-based microvalve arrays that need no extra energy to close and feature photolithographically defined precise volumes.   A parallel subnanoliter-volume mixer and an integrated microfluidic perfusion system are presented.</p>

Miniaturized microfluidic systems provide simple and effective solutions for low-cost point-of-care diagnostics and high-throughput biomedical assays.  ...

Research

JoVE Journal

Biology

A Microfluidic Device with Groove Patterns for Studying Cellular Behavior

We describe a microfluidic device with microgrooved patterns for studying cellular behavior.  This microfluidic platform consists of a top fluidic channel ...

A Gradient-generating Microfluidic Device for Cell Biology

 The fabrication and operation of a gradient-generating microfluidic device for studying cellular behavior is described.  A microfluidic platform is an ...

Cell Capture Using a Microfluidic Device

Fabrication of the Thermoplastic Microfluidic Channels

In our lab, we have successfully isolated nucleic acids directly from microliter and submicroliter volumes of human blood, urine and stool using ...

Microfluidic Applications for Disposable Diagnostics

In this interview, Dr. Klapperich discusses the fabrication of thermoplastic microfluidic devices and their application for development of new ...

Mapping Bacterial Functional Networks and Pathways in <em>Escherichia Coli</em> using Synthetic Genetic Arrays

Mapping Bacterial Functional Networks and Pathways in Escherichia Coli using Synthetic Genetic Arrays

Phenotypes  are determined by a complex series of physical (e.g. protein-protein) and  functional (e.g. gene-gene or genetic) interactions (GI)1. While ...

Design and Use of Multiplexed Chemostat Arrays

Chemostats are continuous culture systems in which cells are grown in a tightly controlled, chemically constant environment where culture density is ...

Assembly of Nucleosomal Arrays from Recombinant Core Histones and Nucleosome Positioning DNA

Core histone octamers that are repetitively spaced along a DNA molecule  are called nucleosomal arrays. Nucleosomal arrays are obtained in one of two  ...

A Rapid Protocol for Integrating Extrachromosomal Arrays With High Transmission Rate into the <em>C. elegans</em> Genome

A Rapid Protocol for Integrating Extrachromosomal Arrays With High Transmission Rate into the C. elegans Genome

Microinjecting DNA into the cytoplasm of the syncytial gonad of Caenorhabditis elegans is the main technique used to establish transgenic lines that ...

Identifying Protein-protein Interaction Sites Using Peptide Arrays

Protein-protein interactions mediate most of the processes in the living cell and control homeostasis of the organism. Impaired protein interactions may ...