Name: brain slice stimulation using a microfluidic network and standard perfusion chamber
Uploaded: 2007-10-01T00:00:00
Description: Watch this Scientific Journal Video about Brain Slice Stimulation Using a Microfluidic Network and Standard Perfusion Chamber at JoVE.com

<p class="jove_content">Funding was provided by NIH MH-64611 and NARSAD Young Investigator Award. The authors would also like to acknowledge Adam Beagley, Mark Dikopf, and Ben Smith for their technical assistance.</p>

<p class="jove_title">SU-8 mold fabrication</p>
<p class="jove_step">Master preparation</p>
<ol>
<li>The SU-8 master on silicon wafer substrate is prepared using a two-step standard negative resist lithography process.</li>
<li>The alignment marks on the silicon wafer are removed using a razor blade as the height of these structures (located along the outer periphery of the wafer) is more than the actual device structures. </li>
<li>The silicon wafer is then cleaned using isopropyl alcohol and dried in a stream of N<sub>2</sub>. Support pillars...

<ol>
	<li>Blake, A. J., Pearce, T. M., Rao, N. S., Johnson, S. M., Williams, J. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Multilayer+PDMS+microfluidic+chamber+for+controlling+brain+slice+microenvironment.">Multilayer PDMS microfluidic chamber for controlling brain slice microenvironment.</a> <em style='font-style: italic'>Lab on a Chip</em>. <b>7</b>, 842-849 (2007).</li><li>Walker, G. M., Beebe, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+passive+pumping+method+for+microfluidic+devices.">A passive pumping method for microfluidic devices.</a> <em style='font-style: italic'>Lab on a Chip</em>. <b>2</b>, 131-134 (2002).</li></ol>

<p class="jove_content">Existing macroscale or microscale brain slice perfusion chambers are limited in terms of the spatial resolution they provide to expose brain slices with neurotransmitters. The microfluidic device technology demonstrated here overcomes this limitation using simple bioMEMS techniques. It is anticipated that the simplicity in the fabrication of the microfluidic device and the ease in integrating it with existing electrophysiology setups will allow widespread application of the demonstrated device technology. Interesting exp...

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>RC-26GPL</td>
<td>Tool</td>
<td>Warner Instruments</td>
<td>W2-64-0236</td>
<td>Low Profile Large Bath RC-26GLP Recording Chamber</td>
</tr>
<tr>
<td>SHD-26GH/10</td>
<td>Tool</td>
<td>Warner Instruments</td>
<td>W2-64-0253</td>
<td>Stainless steel slice hold-down for RC-26G, 1.0 mm thread spacing </td>
</tr>
<tr>
<td>PDMS (polydimethylsiloxane)</td>
<td>Reagent</td>
<td>Dow Corning</td>
<td>Sylgard 184</td>
<td>Silicone Elastomer Kit</td>
</tr>
<tr>
<td>Plasma Preen-II 862</td>
<td>Tool</td>
<td>Plasmatic Systems, Inc.</td>
<td>&nbsp;</td>
<td>Microwave plasma system</td>
</tr>
<tr>
<td>Model P-1</td>
<td>Tool</td>
<td>Warner Instruments</td>
<td>W2-64-0277</td>
<td>Series 20 Plain Platform, Model P-1</td>
</tr>
<tr>
<td>SA-NIK</td>
<td>Tool</td>
<td>Warner Instruments</td>
<td>W2-64-0291</td>
<td>Adapter for Nikon Diaphot/TE200/TE2000, SA-NIK</td>
</tr>
<tr>
<td>Oxygenated, heated ACSF (Artificial cerebro-spinal fluid)</td>
<td>Reagent</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>Exact composition will vary with application</td>
</tr>		</tbody>
		</table>
		</div>
	

brain slice stimulation using a microfluidic network and standard perfusion chamber

<p class="jove_content">We have demonstrated the fabrication of a two-level microfluidic device that can be easily integrated with existing electrophysiology setups. The two-level microfluidic device is fabricated using a two-step standard negative resist lithography process <sup>1</sup>. The first level contains microchannels with inlet and outlet ports at each end. The second level contains microscale circular holes located midway of the channel length and centered along with channel width. Passive pumping method is used to pump fluids from the inlet port to the outlet port <sup>2</sup>.  The microfluidic device is integrated with off-the-shelf perfusion chambers and allows seamless integration with the electrophysiology setup. The fluids introduced at the inlet ports flow through the microchannels towards the outlet ports and also escape through the circular openings located on top of the microchannels into the bath of the perfusion. Thus the bottom surface of the brain slice placed in the perfusion chamber bath and above the microfluidic device can be exposed with different neurotransmitters. The microscale thickness of the microfluidic device and the transparent nature of the materials [glass coverslip and PDMS (polydimethylsiloxane)] used to make the microfluidic device allow microscopy of the brain slice. The microfluidic device allows modulation (both spatial and temporal) of the chemical stimuli introduced to the brain slice microenvironments.</p>

Watch this Scientific Journal Video about Brain Slice Stimulation Using a Microfluidic Network and Standard Perfusion Chamber at JoVE.com

Brain Slice Stimulation Using a Microfluidic Network and Standard Perfusion Chamber

<p class="jove_content">We demonstrate fabrication of a simple microfluidic device that can be integrated with standard electrophysiology setups to expose microscale surfaces of a brain slice in a well controlled manner to different neurotransmitters.</p>

We have demonstrated the fabrication of a two-level microfluidic device that can be easily integrated with existing electrophysiology setups. The ...

Research

JoVE Journal

Biology

Fabrication of a Microfluidic Device for the Compartmentalization of Neuron Soma and Axons

In this video, we demonstrate the technique of soft lithography with polydimethyl siloxane (PDMS) which we use to fabricate a microfluidic device for ...

Preparing E18 Cortical Rat Neurons for Compartmentalization in a Microfluidic Device

In this video, we demonstrate the preparation of E18 cortical rat neurons. E18 cortical rat neurons are obtained from E18 fetal rat cortex previously ...

CD4+ T-Lymphocyte Capture Using a Disposable Microfluidic Chip for HIV

Cell Capture Using a Microfluidic Device

Assessing Neural Stem Cell Motility Using an Agarose Gel-based Microfluidic Device

While microfluidic technology is reaching a new level of maturity for macromolecular assays, cell-based assays are still at an infant stage1. This is ...

Trypsinizing and Subculturing Mammalian Cells

As cells reach confluency, they must be subcultured or passaged. Failure to subculture confluent cells results in reduced mitotic index and eventually in ...

Freezing, Thawing, and Packaging Cells for Transport

Cultured mammalian cells are used extensively in cell biology studies. It requires a number of special skills in order to be able to preserve the ...

Platelet Adhesion and Aggregation Under Flow using Microfluidic Flow Cells

Platelet aggregation occurs in response to vascular injury where the extracellular matrix below the endothelium has been exposed. The platelet adhesion ...

Mapping the After-effects of Theta Burst Stimulation on the Human Auditory Cortex with Functional Imaging

Auditory cortex pertains to the processing of sound, which is at the basis of speech or music-related processing1. However, despite considerable recent ...

Investigating Protein-protein Interactions in Live Cells Using Bioluminescence Resonance Energy Transfer

Assays based on Bioluminescence Resonance Energy Transfer (BRET) provide a sensitive and reliable means to monitor protein-protein interactions in live ...