Name: polycrystalline silicon thin-film solar cells with plasmonic-enhanced light-trapping
Uploaded: 2012-07-02T08:03:00
Description: Watch this Scientific Journal Video about Polycrystalline Silicon Thin-film Solar cells with Plasmonic-enhanced Light-trapping at JoVE.com

Этот исследовательский проект при поддержке Австралийского исследовательского совета по связи с грантом РГС Солнечной Пти ООО Цзин Рао признает ее Университета Нового Южного Уэльса вице-канцлер Докторантура стипендий. СЭМ изображения были взяты Jongsung парк использованием оборудования, предоставленного Электронная микроскопия группа из Университета Нового Южного Уэльса.

1. Производство поликристаллического кремния, солнечных элементов (Анимация 3) <ol><li> Кремний пленок <ol class="lalpha"><li> Подготовка электронной лучевого испарения инструмент выпечке его на ~ 100 ° С в течение ночи, чтобы добраться до базы давление &lt;3E-8 мм рт. Предустановленные образца нагревате?...

<ol>
	<li>Henley, F. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Kerf-free+wafering.">Kerf-free wafering.</a> , 1184-1192 (2010).</li><li>Kunz, O., Wong, J., Janssens, J., Bauer, J., Breitenstein, O., Aberle, A. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Shunting+problems+due+to+sub-micron+pinholes+in+evaporated+solid-phase+crystallised+poly-Si+thin-film+solar+cells+on+glass.">Shunting problems due to sub-micron pinholes in evaporated solid-phase crystallised poly-Si thin-film solar cells on glass.</a> Progress Photovoilt.: Res. Appl. 17, 35-46 (2009).</li><li>Kunz, O., Ouyang, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=5%+Efficient+evaporated+solid-phase+crystallised+polycrystalline+silicon+solar+cells.">5% Efficient evaporated solid-phase crystallised polycrystalline silicon solar cells.</a> Progress Photovolt.: Res. Appl. 17, 567-573 (2009).</li><li>Van Nieuwenhuysen, K., Payo, M. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Epitaxially+grown+emitters+for+thin+film+silicon+solar+cells+result+in+16%+efficiency.">Epitaxially grown emitters for thin film silicon solar cells result in 16% efficiency.</a> Thin Solid Films. 518, S80-S82 (2008).</li><li>Lee, B. G., Stradin, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Light-trapping+by+a+dielectric+nanoparticle+back+reflector+in+film+silicon+solar+cells.">Light-trapping by a dielectric nanoparticle back reflector in film silicon solar cells.</a> Appl. Phys. Lett. 99, 064101 (2011).</li><li>Catchpole, K. R., Polman, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Plasmonic+solar+cells.">Plasmonic solar cells.</a> Optics Express. 16, 21793-21800 (2008).</li><li>Ouyang, Z., Zhao, X. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Nanoparticle+enhanced+light-trapping+in+thin-film+silicon+solar+cells.">Nanoparticle enhanced light-trapping in thin-film silicon solar cells.</a> Progress Photovolt.: Res. Appl. 19, 917-926 (2011).</li><li>Catchpole, K. R., Polman, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design+principle+for+particle+plasmon+enhanced+solar+cells.">Design principle for particle plasmon enhanced solar cells.</a> Appl. Phys. Lett. 93, 191113 (2008).</li><li>Beck, F. J., Mokkapati, S., Polman, A., Catchpole, K. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Asymmetry+in+photocurrent+enhancement+by+plasmonic+nanoparticle+arrays+located+on+the+front+or+on+the+rear+of+solar+cells.">Asymmetry in photocurrent enhancement by plasmonic nanoparticle arrays located on the front or on the rear of solar cells.</a> Appl. Phys. Lett. 96, 033113 (2008).</li><li>Beck, F. J., Verhagen, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Resonant+SPP+modes+supported+bt+discrete+metal+nanoparticles+on+high+index+substrates.">Resonant SPP modes supported bt discrete metal nanoparticles on high index substrates.</a> Optics Express. 19, 146-156 (2010).</li><li>Kunz, O., Ouyang, Z., al, a. t. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=5%+Efficient+evaporated+solid-phase+crystallised+polycrystalline+silicon+thin-film+solar+cells.">5% Efficient evaporated solid-phase crystallised polycrystalline silicon thin-film solar cells.</a> Progress Photovolt. 17, 567-573 (2009).</li><li>Keevers, M. J., Young, T. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=10%+Efficient+CSG+minimodules.">10% Efficient CSG minimodules.</a> , 1783-1790 (2007).</li></ol>

Сгущенное поликристаллических кремниевых солнечных элементов и рассеяния света плазмонные наночастицы являются идеальными партнерами для легкого захвата. Такие клетки являются плоскими, поэтому они не могут рассчитывать на рассеяния света от текстурированных поверхностей, не може...

<table border="1"><tbody><tr><td> Название реагента </td><td> Компания </td><td> Номер по каталогу </td><td> Комментарии </td></tr><tr><td> Серебряный гранулированные </td><td> Sigma-Aldrich </td><td> 303372 </td><td> 99,99% </td></tr><tr><td> MgF 2, случайные кристаллы оптического качества </td><td> Sigma-Aldrich </td><td> 378836 </td><td> &gt; = 99,99% </td></tr><tr><td> Dulux одного слоя краски потолка </td><td> Dulux </td><td></td><td> R&gt; 90% (500-1100 нм) </td></tr></tbody></table>

polycrystalline silicon thin-film solar cells with plasmonic-enhanced light-trapping

One of major approaches to cheaper solar cells is reducing the amount of semiconductor material used for their fabrication and making cells thinner. To compensate for lower light absorption such physically thin devices have to incorporate light-trapping which increases their optical thickness. Light scattering by textured surfaces is a common technique but it cannot be universally applied to all solar cell technologies. Some cells, for example those made of evaporated silicon, are planar as produced and they require an alternative light-trapping means suitable for planar devices. Metal nanoparticles formed on planar silicon cell surface and capable of light scattering due to surface plasmon resonance is an effective approach.
The paper presents a fabrication procedure of evaporated polycrystalline silicon solar cells with plasmonic light-trapping and demonstrates how the cell quantum efficiency improves due to presence of metal nanoparticles.
To fabricate the cells a film consisting of alternative boron and phosphorous doped silicon layers is deposited on glass substrate by electron beam evaporation. An Initially amorphous film is crystallised and electronic defects are mitigated by annealing and hydrogen passivation. Metal grid contacts are applied to the layers of opposite polarity to extract electricity generated by the cell. Typically, such a ~2 &mu;m thick cell has a short-circuit current density (Jsc) of 14-16 mA/cm2, which can be increased up to 17-18 mA/cm2 (~25% higher) after application of a simple diffuse back reflector made of a white paint.
To implement plasmonic light-trapping a silver nanoparticle array is formed on the metallised cell silicon surface. A precursor silver film is deposited on the cell by thermal evaporation and annealed at 23&deg;C to form silver nanoparticles. Nanoparticle size and coverage, which affect plasmonic light-scattering, can be tuned for enhanced cell performance by varying the precursor film thickness and its annealing conditions. An optimised nanoparticle array alone results in cell Jsc enhancement of about 28%, similar to the effect of the diffuse reflector. The photocurrent can be further increased by coating the nanoparticles by a low refractive index dielectric, like MgF2, and applying the diffused reflector. The complete plasmonic cell structure comprises the polycrystalline silicon film, a silver nanoparticle array, a layer of MgF2, and a diffuse reflector. The Jsc for such cell is 21-23 mA/cm2, up to 45% higher than Jsc of the original cell without light-trapping or ~25% higher than Jsc for the cell with the diffuse reflector only.
Introduction
Light-trapping in silicon solar cells is commonly achieved via light scattering at textured interfaces. Scattered light travels through a cell at oblique angles for a longer distance and when such angles exceed the critical angle at the cell interfaces the light is permanently trapped in the cell by total internal reflection (Animation 1: Light-trapping). Although this scheme works well for most solar cells, there are developing technologies where ultra-thin Si layers are produced planar (e.g. layer-transfer technologies and epitaxial c-Si layers) 1 and or when such layers are not compatible with textures substrates (e.g. evaporated silicon) 2. For such originally planar Si layer alternative light trapping approaches, such as diffuse white paint reflector 3, silicon plasma texturing 4 or high refractive index nanoparticle reflector 5 have been suggested.
Metal nanoparticles can effectively scatter incident light into a higher refractive index material, like silicon, due to the surface plasmon resonance effect 6. They also can be easily formed on the planar silicon cell surface thus offering a light-trapping approach alternative to texturing. For a nanoparticle located at the air-silicon interface the scattered light fraction coupled into silicon exceeds 95% and a large faction of that light is scattered at angles above critical providing nearly ideal light-trapping condition (Animation 2: Plasmons on NP). The resonance can be tuned to the wavelength region, which is most important for a particular cell material and design, by varying the nanoparticle average size, surface coverage and local dielectric environment 6,7. Theoretical design principles of plasmonic nanoparticle solar cells have been suggested 8. In practice, Ag nanoparticle array is an ideal light-trapping partner for poly-Si thin-film solar cells because most of these design principle are naturally met. The simplest way of forming nanoparticles by thermal annealing of a thin precursor Ag film results in a random array with a relatively wide size and shape distribution, which is particularly suitable for light-trapping because such an array has a wide resonance peak, covering the wavelength range of 700-900 nm, important for poly-Si solar cell performance. The nanoparticle array can only be located on the rear poly-Si cell surface thus avoiding destructive interference between incident and scattered light which occurs for front-located nanoparticles 9. Moreover, poly-Si thin-film cells do not requires a passivating layer and the flat base-shaped nanoparticles (that naturally result from thermal annealing of a metal film) can be directly placed on silicon further increases plasmonic scattering efficiency due to surface plasmon-polariton resonance 10.
The cell with the plasmonic nanoparticle array as described above can have a photocurrent about 28% higher than the original cell. However, the array still transmits a significant amount of light which escapes through the rear of the cell and does not contribute into the current. This loss can be mitigated by adding a rear reflector to allow catching transmitted light and re-directing it back to the cell. Providing sufficient distance between the reflector and the nanoparticles (a few hundred nanometers) the reflected light will then experience one more plasmonic scattering event while passing through the nanoparticle array on re-entering the cell and the reflector itself can be made diffuse - both effects further facilitating light scattering and hence light-trapping. Importantly, the Ag nanoparticles have to be encapsulated with an inert and low refractive index dielectric, like MgF2 or SiO2, from the rear reflector to avoid mechanical and chemical damage 7. Low refractive index for this cladding layer is required to maintain a high coupling fraction into silicon and larger scattering angles, which are ensured by the high optical contrast between the media on both sides of the nanoparticle, silicon and dielectric 6. The photocurrent of the plasmonic cell with the diffuse rear reflector can be up to 45% higher than the current of the original cell or up to 25% higher than the current of an equivalent cell with the diffuse reflector only.

Watch this Scientific Journal Video about Polycrystalline Silicon Thin-film Solar cells with Plasmonic-enhanced Light-trapping at JoVE.com

Polycrystalline Silicon Thin-film Solar cells with Plasmonic-enhanced Light-trapping

Поликристаллических кремниевых тонкопленочных солнечных элементов на стекло изготавливается путем осаждения бора и фосфора, легированных слоев кремния следует кристаллизации, пассивация дефектов и металлизации. Плазмонных свет захвата вводится путем формирования наночастиц серебра на поверхности кремния клетки ограничены с рассеянным отражатель в результате чего около 45% фототока аксессуара.

Поликристаллического кремния тонкопленочные солнечные элементы с Плазмонных повышенной световой захвата

One of major approaches to cheaper solar cells is reducing the amount of semiconductor material used for their fabrication and making cells thinner. To ...

Research

JoVE Journal

Engineering

Nanomoulding of Functional Materials, a Versatile Complementary Pattern Replication Method to Nanoimprinting

Nanomoulding функциональных материалов, Универсальный дополнительный метод репликации Шаблон для Nanoimprinting

We describe a nanomoulding technique which  allows low-cost nanoscale patterning of functional materials, materials stacks  and full devices. Nanomoulding ...

Synthesis and Characterization of High c-axis ZnO Thin Film by Plasma Enhanced Chemical Vapor Deposition System and its UV Photodetector Application

Синтез и характеристика высокого C-оси ZnO тонкой пленки по плазмостимулированного химического осаждения системы и ее УФ фотодетектор приложение

In this study, zinc oxide (ZnO) thin films with high c-axis (0002) preferential orientation have been successfully and effectively synthesized onto ...

Integration of Light Trapping Silver Nanostructures in Hydrogenated Microcrystalline Silicon Solar Cells by Transfer Printing

Интеграция легкими прилипания Серебряные наноструктур в гидрогенизированное микрокристаллическая кремниевых солнечных элементов по трансферная печать

One of the potential applications of metal nanostructures is light trapping in solar cells, where unique optical properties of nanosized metals, commonly ...

Iridium Oxide-reduced Graphene Oxide Nanohybrid Thin Film Modified Screen-printed Electrodes as Disposable Electrochemical Paper Microfluidic pH Sensors

Iridium Оксид со сниженным Графен Оксид наногибридный тонка пленка Модифицированные сериграфированного электроды как Одноразовая Электрохимический бумаги микрожидком рН Датчики

A facile, controllable, inexpensive and green electrochemical synthesis of IrO2-graphene nanohybrid thin films is developed to fabricate an easy-to-use ...

Digital Printing of Titanium Dioxide for Dye Sensitized Solar Cells

Цифровая печать диоксида титана для ячейка гретцеля

Silicon solar cell manufacturing is an expensive and high energy consuming process. In contrast, dye sensitized solar cell production is less ...

Recombination Dynamics in Thin-film Photovoltaic Materials via Time-resolved Microwave Conductivity

Рекомбинация Динамика в тонкопленочных фотоэлектрических материалов с помощью времяразрешенные СВЧ проводимости

A method for investigating recombination dynamics of photo-induced charge carriers in thin film semiconductors, specifically in photovoltaic materials ...

Monovalent Cation Doping of CH3NH3PbI3 for Efficient Perovskite Solar Cells

Monovalent Cation Doping of CH3NH3PbI3 for Efficient Perovskite Solar Cells

Одновалентного катиона легирование CH<sub&gt; 3</sub&gt; NH<sub&gt; 3</sub&gt; PbI<sub&gt; 3</sub&gt; Для эффективного перовскита солнечных батарей

Here, we demonstrate the incorporation of monovalent cation additives into CH3NH3PbI3 perovskite in order to adjust the optical, excitonic, and electrical ...

Electrospinning of Photocatalytic Electrodes for Dye-sensitized Solar Cells

Электропереработка фотокаталитических электродов для сенсибилизированных красителем солнечных элементов

This work demonstrates a protocol to fabricate a fiber-based photoanode for dye-sensitized solar cells, consisting of a light-scattering layer made of ...

In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for Cu(In,Ga)Se2 Solar Cells

In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for CuIn,GaSe2 Solar Cells

На месте Мониторинг производительности ускоренной деградации солнечных элементов и модулей: тематическое исследование для Cu (In, Ga) Se2 солнечных батарей

The levelized cost of electricity (LCOE) of photovoltaic (PV) systems is determined by, among other factors, the PV module reliability. Better prediction ...

Bulk and Thin Film Synthesis of Compositionally Variant Entropy-stabilized Oxides

Массовая и тонкопленочных синтез композиционно вариант энтропия стабилизированный оксидов

Here, we present a procedure for the synthesis of bulk and thin film multicomponent (Mg0.25(1-x)CoxNi0.25(1-x)Cu0.25(1-x)Zn0.25(1-x))O (Co variant) and ...