Name: echo particle image velocimetry
Uploaded: 2012-12-27T12:00:00
Description: Watch this Scientific Journal Video about Echo Particle Image Velocimetry at JoVE.com

The authors gratefully acknowledge support by the National Science Foundation, CBET0846359, grant monitor Horst Henning Winter.

1. Create a Measurable Flow
<ol>
 <li>EPIV validation measurements will be demonstrated in pipe flow of a glycerin water solution (50% glycerin - 50% water). A schematic of the experimental setup is shown in Figure 1. </li>
 <li>Hollow glass spheres with a nominal diameter of 10 &mu;m are added to the fluid at a concentration of approximately 17 weight parts per million. The hollow glass spheres serve as ultrasound contrast agents, and their size and density are chosen such that they passively fo...

<ol>
	<li>White, F. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Fluid Mechanics. , (1994).</li><li>Hak, M. G. a. d. -. e. l. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Flow Control: Passive, Active, and Reactive Flow Management. , (2000).</li><li>Kim, B. H., Hertzberg, J. R., Shandas, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Development+and+validation+of+echo+PIV.">Development and validation of echo PIV.</a> Exp. Fluids. 36, 455-462 (2004).</li><li>Zheng, H., Liu, L., Williams, L., Hertzberg, J. R., Lanning, C., Shandas, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Real+time+multicomponent+echo+particle+image+velocimetry+technique+for+opaque+flow+imaging.">Real time multicomponent echo particle image velocimetry technique for opaque flow imaging.</a> Appl. Phys. Lett. 88, 261915 (2006).</li><li>Beulen, B., Bijnens, N., Rutten, M., Brands, P., van de Vosse, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Perpendicular+ultrasound+velocity+measurement+by+2D+cross+correlation+of+RF+data.+Part+A:+validation+in+a+straight+tube.">Perpendicular ultrasound velocity measurement by 2D cross correlation of RF data. Part A: validation in a straight tube.</a> Exp. Fluids. 49, 1177-1186 (2010).</li><li>Poelma, C., Mari, J. M., Foin, N., Tang, M. -. X., Krams, R., Caro, C. G., Weinberg, P. D., Westerweel, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=3D+Flow+reconstruction+using+ultrasound+PIV.">3D Flow reconstruction using ultrasound PIV.</a> Exp. Fluids. 50, 777-785 (2011).</li><li>GE VINGMED ULTRASOUND A/A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Vivid 7/Vivid 7 PRO Userâ€™s Manual. , (1988).</li><li>Szabo, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Diagnostic Ultrasound Imaging: Inside Out. , (2004).</li><li>Raffel, M., Willert, C., Wereley, S., Kompenhans, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Particle Image Velocimetry: A Practical Guide. , (2007).</li></ol>

The operating protocol for an echo particle image velocimetry (EPIV) system capable of acquiring two-dimensional fields of velocity in optically opaque fluids or through optically opaque geometries was described. Practical application of EPIV is well-suited for the study of industrial and biological flow systems, where the flow of opaque fluids occurs in a great many application. The particular system presented here was purposefully built to study the flow properties of liquefied biomass fluids used in the production of...

<table border="1">
	<tbody>
 	<tr>
 	<td>Name of the reagent</td>
 <td>Company</td>
 <td>Catalogue number</td>
 <td>Comments (optional)</td>
 </tr>
 <tr>
 		<td>Ultrasound Machine</td>
 <td>GE</td>
 <td>Vivid 7 Pro	</td>
 <td></td>
 </tr>
 <tr>
 		<td>Linear Ultrasound Array</td>
 <td>GE</td>
 <td>10 L	</td>
 <td></td>
 </tr>
 <tr>
 		<td>DC Water Pump</td>
 <td>KNF</td>
 <td>NF 10 KPDC	</td>
 <td></td>
 </tr>
 <tr>
 		<td>Vector Processing Software</td>
 <td>Lavision</td>
 <td>DaVis 7.2	</td>
 <td></td>
 </tr>
 <tr>
 		<td>Post Processing Software</td>
 <td>Mathworks</td>
 <td>MATLAB 7.12	</td>
 <td></td>
 </tr>
 <tr>
 		<td>Acrylic Tubing</td>
 <td>McMaster-Carr</td>
 <td>8486K531	</td>
 <td></td>
 </tr>
 <tr>
 		<td>Ultrasound Gel</td>
 <td>Parker</td>
 <td>Aquasonic 100	</td>
 <td></td>
 </tr>
 </tbody>
</table>

echo particle image velocimetry

The transport of mass, momentum, and energy in fluid flows is ultimately determined by spatiotemporal distributions of the fluid velocity field.1 Consequently, a prerequisite for understanding, predicting, and controlling fluid flows is the capability to measure the velocity field with adequate spatial and temporal resolution.2 For velocity measurements in optically opaque fluids or through optically opaque geometries, echo particle image velocimetry (EPIV) is an attractive diagnostic technique to generate "instantaneous" two-dimensional fields of velocity.3,4,5,6 In this paper, the operating protocol for an EPIV system built by integrating a commercial medical ultrasound machine7 with a PC running commercial particle image velocimetry (PIV) software8 is described, and validation measurements in Hagen-Poiseuille (i.e., laminar pipe) flow are reported.
For the EPIV measurements, a phased array probe connected to the medical ultrasound machine is used to generate a two-dimensional ultrasound image by pulsing the piezoelectric probe elements at different times. Each probe element transmits an ultrasound pulse into the fluid, and tracer particles in the fluid (either naturally occurring or seeded) reflect ultrasound echoes back to the probe where they are recorded. The amplitude of the reflected ultrasound waves and their time delay relative to transmission are used to create what is known as B-mode (brightness mode) two-dimensional ultrasound images. Specifically, the time delay is used to determine the position of the scatterer in the fluid and the amplitude is used to assign intensity to the scatterer. The time required to obtain a single B-mode image, t, is determined by the time it take to pulse all the elements of the phased array probe. For acquiring multiple B-mode images, the frame rate of the system in frames per second (fps) = 1/&delta;t. (See 9 for a review of ultrasound imaging.)
For a typical EPIV experiment, the frame rate is between 20-60 fps, depending on flow conditions, and 100-1000 B-mode images of the spatial distribution of the tracer particles in the flow are acquired. Once acquired, the B-mode ultrasound images are transmitted via an ethernet connection to the PC running the PIV commercial software. Using the PIV software, tracer particle displacement fields, D(x,y)[pixels], (where x and y denote horizontal and vertical spatial position in the ultrasound image, respectively) are acquired by applying cross correlation algorithms to successive ultrasound B-mode images.10 The velocity fields, u(x,y)[m/s], are determined from the displacements fields, knowing the time step between image pairs, &Delta;T[s], and the image magnification, M[meter/pixel], i.e., u(x,y) = MD(x,y)/&Delta;T. The time step between images &Delta;T = 1/fps + D(x,y)/B, where B[pixels/s] is the time it takes for the ultrasound probe to sweep across the image width. In the present study, M = 77[&mu;m/pixel], fps = 49.5[1/s], and B = 25,047[pixels/s]. Once acquired, the velocity fields can be analyzed to compute flow quantities of interest.

An instantaneous echo particle image velocimetry (EPIV) vector field is shown in Figure 3. The vector plot shows velocity vectors every fourth column, and the background color contour map corresponds to velocity magnitude. An ensemble average vector plot averaged over 1000 instantaneous EPIV vector plots is shown in Figure 4. Consistent with pipe flow, the velocity vectors are primarily in the streamwise direction, the largest velocities occur at the pipe centerline, and the velocities ...

Watch this Scientific Journal Video about Echo Particle Image Velocimetry at JoVE.com

Echo Particle Image Velocimetry

An echo particle image velocimetry (EPIV) system capable of acquiring two-dimensional fields of velocity in optically opaque fluids or through optically opaque geometries is described, and validation measurements in pipe flow are reported.

The transport of mass, momentum, and energy in fluid flows is ultimately determined by spatiotemporal distributions of the fluid velocity field.1 ...

Research

Education

JoVE Journal

JoVE Core

Engineering

Physics

Mechanical Engineering

Unit 1

Kinematics of a Particle

Vectors and Scalars

SCIENTISTS IN ACTION

Gradient Echo Quantum Memory in Warm Atomic Vapor

Gradient  echo memory (GEM) is a protocol for storing optical quantum states of light in  atomic ensembles. The primary motivation for such a technology ...

High-speed Particle Image Velocimetry Near Surfaces

Multi-dimensional and transient flows play a key role in many areas of science, engineering, and health sciences but are often not well understood. The ...

Using Neutron Spin Echo Resolved Grazing Incidence Scattering to Investigate Organic Solar Cell Materials

The spin echo resolved grazing incidence scattering (SERGIS) technique has been used to probe the length-scales associated with irregularly shaped ...

Characterization of Nanocrystal Size Distribution using Raman Spectroscopy with a Multi-particle Phonon Confinement Model

Analysis of the size distribution of nanocrystals is a critical requirement for the processing and optimization of their size-dependent properties. The ...

Development of an Experimental Setup for the Measurement of the Coefficient of Restitution under Vacuum Conditions

The Discrete Element Method is used for the simulation of particulate systems to describe and analyze them, to predict and afterwards optimize their ...

Three-dimensional Particle Tracking Velocimetry for Turbulence Applications: Case of a Jet Flow

3D-PTV is a quantitative flow measurement technique that aims to track the Lagrangian paths of a set of particles in three dimensions using stereoscopic ...

Simultaneous Measurement of Turbulence and Particle Kinematics Using Flow Imaging Techniques

Numerous problems in scientific and engineering fields involve understanding the kinematics of particles in turbulent flows, such as contaminants, marine ...

3D Printing - Evaluating Particle Emissions of a 3D Printing Pen

Three-dimensional (3D) printing as a type of additive manufacturing shows continuing increase in application and consumer popularity. The fused filament ...

Study of Protein Dynamics via Neutron Spin Echo Spectroscopy

Study of Protein Dynamics via Neutron Spin Echo Spectroscopy

Most human body proteins' activity and functionality are related to configurational changes of entire subdomains within the protein crystal structure. The ...

Deep Neural Networks for Image-Based Dietary Assessment

Due to the issues and costs associated with manual dietary assessment approaches, automated solutions are required to ease and speed up the work and ...