April 22nd, 2013
•In this work, we describe the use of the atom-probe tomography technique for studying the grain boundaries of the absorber layer in a CIGS solar cell. A novel approach to prepare the atom probe tips containing the desired grain boundary with a known structure is also presented here.
Tags
Related Videos
Scanning-probe Single-electron Capacitance Spectroscopy
Casting Protocols for the Production of Open Cell Aluminum Foams by the Replication Technique and the Effect on Porosity
Energy Dispersive X-ray Tomography for 3D Elemental Mapping of Individual Nanoparticles
Experiments on Ultrasonic Lubrication Using a Piezoelectrically-assisted Tribometer and Optical Profilometer
The Measurement of Unsteady Surface Pressure Using a Remote Microphone Probe
Probing C84-embedded Si Substrate Using Scanning Probe Microscopy and Molecular Dynamics
Microfluidic Imaging Flow Cytometry by Asymmetric-detection Time-stretch Optical Microscopy (ATOM)
In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for Cu(In,Ga)Se2 Solar Cells
Fabrication of Magnetic Nanostructures on Silicon Nitride Membranes for Magnetic Vortex Studies Using Transmission Microscopy Techniques
Fabrication of Robust Nanoscale Contact between a Silver Nanowire Electrode and CdS Buffer Layer in Cu(In,Ga)Se2 Thin-film Solar Cells
ABOUT JoVE
Copyright © 2024 MyJoVE Corporation. All rights reserved