Name: quasi-light storage for optical data packets
Uploaded: 2014-02-06T13:00:00
Description: Watch this Scientific Journal Video about Quasi-light Storage for Optical Data Packets at JoVE.com

We gratefully acknowledge the financial support of Deutsche Telekom Innovation Laboratories.

1. Preparing the System (Figure 4)
<ol>
	<li>Insert the laser diodes LD1 and LD2 in the specific mount and connect it with the current (LDC) and temperature controllers (TEC). Turn the devices on and check the functionality of the laser diodes with the optical spectrum analyzer. Usually, a telecom wavelength around 1,550 nm is used.</li>
	<li>Connect the laser diode to the modulators (IM/PM and MZM1) according to the setup in Figure 4. The optical connectors need to be cleaned before use, to ensure the...

<ol>
	<li>Spring, J., Tucker, R. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Photonic+2+x+2+packet+switch+with+input+buffers.">Photonic 2 x 2 packet switch with input buffers.</a> Electron. Lett. 29 (3), 284-285 (1993).</li><li>Krauss, T. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Why+do+we+need+slow+light.">Why do we need slow light.</a> Nat. Photonics. 2, 448-450 (2008).</li><li>Hau, L. V., Harris, S. E., Dutton, Z., Behroozi, C. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Light+speed+reduction+to+17+meters+per+second+in+an+ultracold+atomic+gas.">Light speed reduction to 17 meters per second in an ultracold atomic gas.</a> Nature. 397, 594-598 (1999).</li><li>Chang-Hasnian, C. J., Ku, P. C., Kim, J., Chuang, S. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Variable+optical+buffer+using+slow+light+in+semiconductor+nanostructures.">Variable optical buffer using slow light in semiconductor nanostructures.</a> Proc. IEEE. 91 (11), 1897-1810 (2003).</li><li>Gersen, H., Karle, T. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Real-space+observation+of+ultraslow+light+in+Photonic+Crystal+Waveguides.">Real-space observation of ultraslow light in Photonic Crystal Waveguides.</a> Phys. Rev. Lett. 94 (7), 073903-073907 (2005).</li><li>Th&#233;venaz, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Slow+and+fast+light+in+optical+fibres.">Slow and fast light in optical fibres.</a> Nature Photon. 2, 472-481 (2008).</li><li>Uskov, A. V., Sedgwick, F. G., Chang-Hasnian, C. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Delay+Limit+of+Slow+Light+in+Semiconductor+Optical+Amplifiers.">Delay Limit of Slow Light in Semiconductor Optical Amplifiers.</a> IEEE Photon. Technol. Lett. 18 (6), 731-733 (2006).</li><li>Schneider, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Time+Delay+Limits+of+stimulated-Brillouin-scattering-based+slow+light+systems.">Time Delay Limits of stimulated-Brillouin-scattering-based slow light systems.</a> Opt. Lett. 33 (13), 1398-1400 (2008).</li><li>Sharping, J., Okawachi, Y., van Howe, J., Xu, C., Wang, Y., Willner, A., Gaeta, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=All-optical,+wavelength+and+bandwidth+preserving,+pulse+delay+based+on+parametric+wavelength+conversion+and+dispersion.">All-optical, wavelength and bandwidth preserving, pulse delay based on parametric wavelength conversion and dispersion.</a> Opt. Express. 13 (20), 7872-7877 (2005).</li><li>Okawachi, Y., Foster, M., Chen, X., Turner-Foster, A., Salem, R., Lipson, M., Xu, C., Gaeta, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Large+tunable+delays+using+parametric+mixing+and+phase+conjugation+in+Si+nanowaveguides.">Large tunable delays using parametric mixing and phase conjugation in Si nanowaveguides.</a> Opt. Express. 16 (14), 10349-10357 (2008).</li><li>Kash, M. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ultraslow+group+velocity+and+enhanced+nonlinear+optical+effects+in+a+coherently+driven+hot+atomic+gas.">Ultraslow group velocity and enhanced nonlinear optical effects in a coherently driven hot atomic gas.</a> Phys. Rev. Lett. 82 (26), 5229-5232 (1999).</li><li>Turukhin, A. V., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Observation+of+ultraslow+and+stored+light+pulses+in+a+solid.">Observation of ultraslow and stored light pulses in a solid.</a> Phys. Rev. Lett. 88 (2), 023602-023605 (2001).</li><li>Fleischhauer, M., Yelin, S. F., Lukin, M. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=How+to+trap+photons?+Storing+single-photon+quantum+states+in+collective+atomic+excitations.">How to trap photons? Storing single-photon quantum states in collective atomic excitations.</a> Opt. Commun. 179 (1-6), 395-410 (2000).</li><li>Zhu, Z., Gauthier, D. J., Boyd, R. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stored+Light+in+an+Optical+Fiber+via+Stimulated+Brillouin+Scattering.">Stored Light in an Optical Fiber via Stimulated Brillouin Scattering.</a> Science. 318 (5857), 1748-1750 (2007).</li><li>Preu&#223;ler, S., Jamshidi, K., Wiatrek, A., Henker, R., Bunge, C. A., Schneider, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quasi-Light-Storage+based+on+time-frequency+coherence.">Quasi-Light-Storage based on time-frequency coherence.</a> Opt. Express. 17 (18), 15790-15798 (2009).</li><li>Jamshidi, K., Preu&#223;ler, S., Wiatrek, A., Schneider, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+review+to+the+all+optical+Quasi+Light+Storage.">A review to the all optical Quasi Light Storage.</a> IEEE J. Sel. Top. Quantum Electron. Special Issue: Nonlinear Optical Signal Processing. 18 (2), 884-890 (2012).</li><li>Preu&#223;ler, S., Jamshidi, K., Schneider, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quasi-Light-Storage+Enhancement+by+Reducing+the+Brillouin+Gain+Bandwidth.">Quasi-Light-Storage Enhancement by Reducing the Brillouin Gain Bandwidth.</a> Appl. Opt. 50 (22), 4252-4256 (2011).</li><li>Schneider, T., Jamshidi, K., Preu&#223;ler, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quasi-Light+Storage:+A+Method+for+the+Tunable+Storage+of+Optical+Packets+With+a+Potential+Delay-Bandwidth+Product+of+Several+Thousand.">Quasi-Light Storage: A Method for the Tunable Storage of Optical Packets With a Potential Delay-Bandwidth Product of Several Thousand.</a> Bits, J. Lightwave Technol. 28 (17), 2586-2592 (2010).</li><li>Boyd, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Nonlinear Optics. , (2003).</li><li>Yeniay, A., Delavaux, J., Toulouse, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Spontaneous+and+Stimulated+Brillouin+Scattering+Gain+Spectra+in+Optical+Fibers.">Spontaneous and Stimulated Brillouin Scattering Gain Spectra in Optical Fibers.</a> J. Lightwave Technol. 20 (8), 1425-1432 (2002).</li><li>Preu&#223;ler, S., Schneider, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=All+optical+storage+of+phase-shift-keyed+data+packets.">All optical storage of phase-shift-keyed data packets.</a> Opt. Express. 20 (16), 18224-18229 (2012).</li><li>Preu&#223;ler, S., Schneider, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bandwidth+reduction+in+a+multistage+Brillouin+system.">Bandwidth reduction in a multistage Brillouin system.</a> Opt. Lett. 37 (19), 4122-4124 (2012).</li><li>Preu&#223;ler, S., Jamshidi, K., Wiatrek, A., Schneider, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Einfache+variable,+optische+Datenspeicherung+bis+zu+800+ns.">Einfache variable, optische Datenspeicherung bis zu 800 ns.</a> Proceedings Photonische Netze. (ITG-FB 228), P8. , (2011).</li></ol>

The most critical step during the experiment is the adjustment of the frequency comb, i.e. the bandwidth, flatness and position in respect to the data signal in the frequency domain. According to the sampling theorem in frequency domain, signal distortions are avoided if the whole bandwidth of the optical packet is sampled with an ideally flat comb. Thus, the bandwidth of the optical packet defines the minimum bandwidth of the frequency comb and in this bandwidth the comb has to be as flat as possible. A nonidea...

The data transport in the telecommunications networks is optically, since only optical fibers offer the capacity required for today's data traffic transmitted around the world. However, in every node of the network the optical signal has to be transferred into the electrical domain in order to process it. After processing the signal is converted back to the optical domain for further transmission. This double-transfer between the domains is both time and power consuming. In order to use an all-optical processing of the data, the problem of the intermediate storage has to be solved. Thus, lots of methods for the storage or buffering of the optical signals have been suggested. The simplest way is to send the signals into a matrix of waveguides with different lengths2. However, these matrices are bulky and the storage time cannot be tuned since it is predefined by the waveguide length.
The "Slow-Light" method relies on a tunable change of the group refractive index of a medium to slow down the propagation speed of optical signal pulses2. Several physical effects and material systems can be used for this purpose3-6. However, with these methods the signal can be slowed down by just a few bit-lengths, which is by far not sufficient for optical network nodes7,8.
Another approach uses wavelength conversion and dispersion for the generation of tunable delays. Thereby, the center wavelength of the input signal is shifted via nonlinear optical conversion. Afterwards, the signal is fed into a highly dispersive fiber. The difference in the group velocity in the dispersive fiber leads to a delay that is proportional to the product of the wavelength shift and the group-velocity dispersion (GVD) in the fiber. With a second conversion the wavelength is shifted back to the original value. For the wavelength shift techniques like four-wave mixing or self phase modulation can be used. With the conversion and dispersion method storage times up to 243 nsec of tunable delay, which correspond to 2,400 bit, were reported10. However, wavelength conversion and dispersion methods in general need special components and setups for producing a large wavelength shift and/or large GVD. Additionally, they are among the most complex and power-hungry delay methods2.
Other methods store the optical signal into an excitation of a material system. A probe beam is then used to read out the information. Usually these systems cannot be used in the area of telecommunications since they require ultrahigh or -low temperatures11, will not work with telecommunications bandwidths, or require rather complicated setups and high power12-14.
Here we show how a basic property of signals (the time-frequency coherence) can be exploited for the storage of optical data packets. Since no excitation of a material system is used, we have called the method Quasi-light Storage (QLS)15-17. The QLS is independent of the modulation, data format and data rate of the packets and can store optical packets for several thousand bit lengths18.
The basic idea can be seen in Figure 1, here rectangular shaped pulses are shown. However, the method works for every pulse shape and for packets of pulses. The only restriction is that the signals have to be time-limited.
<img alt="Figure 1" fo:content-width="5in" fo:src="/files/ftp_upload/50468/50468fig1highres.jpg" src="/files/ftp_upload/50468/50468fig1.jpg" /> 
Figure 1. Time-frequency coherence for an intensity modulated signal23. A single rectangular signal in the time domain (a) is represented by a sinc-function in the frequency-domain (b). Here the normalized intensity is shown, since it is not possible to measure the fields with optical equipment. The time domain representation for a sequence of rectangular signals is shown in (c). This sequence has still the same spectral shape. But, it consists of equidistant single frequencies under the sinc-envelope (d). The time axis are normalized to half the duration of a single signal and the frequency axis to the first zero crossings, respectively. <a href="https://www.jove.com/files/ftp_upload/50468/50468fig1highres.jpg" target="_blank">Click here to view larger image.</a>
A rectangular pulse in the time domain (Figure 1a) has a "sinus cardinalis" or sinc function sin(px) / px shaped spectrum (Figure 1b), where all frequencies under the envelope are present. A train of rectangular pulses in the time domain (Figure 1c) has still a sinc function shaped spectrum (Figure 1d) with the bandwidth &#916;f. But due to the periodicity, not all frequencies are present anymore. Instead, the spectrum consists of equidistant frequencies and the inverse of the frequency spacing defines the time separation between the pulses &#916;T = 1/&#916;v.
The basic idea of the QLS is now simply to extract equidistant frequencies out of the spectrum of the input packet. Due to time-frequency coherence this results in a copying of the packet in the time domain. The copy with the desired delay can be extracted by a time domain switch.
The principle of our experiment is shown in Figure 2. A time-limited input signal is multiplied with a frequency comb in the frequency-domain. For the multiplication the nonlinear effect of stimulated Brillouin scattering (SBS) is used. The results are equidistant copies of the input signal in the time-domain. One of the signals is extracted with a switch driven by a rectangular function. Thus, at the output of the memory in principle a distortion-free copy of the input pulse can be expected.
<img alt="Figure 2" fo:content-width="5in" fo:src="/files/ftp_upload/50468/50468fig2highres.jpg" src="/files/ftp_upload/50468/50468fig2.jpg" /> 
Figure 2. Basic idea of the Quasi-light Storage15. A time limited input signal (a) is multiplied with a frequency comb (b) in the frequency-domain, which is denoted with a X. This leads to various copies of the signal in the time domain (c). From the generated pulse train one of the copies (d) is extracted with a time-domain switch by a rectangular read signal (e). The switch can be a modulator. The result is a storage of the optical signal. The storage time is defined by the frequency spacing between the comb lines and the read signal. <a href="https://www.jove.com/files/ftp_upload/50468/50468fig2highres.jpg" target="_blank">Click here to view larger image.</a>
SBS itself is a nonlinear effect that can occur in standard single mode fibers (SSMF) at low powers. Thereby, the signal interacts with an optical density change which is generated by a counter propagating pump wave. If the signal wave is downshifted in frequency, a gain region is formed in which the signal will be amplified. If it is up-shifted the signal will be attenuated in the corresponding loss region. The frequency shift between pump and signal is defined by the acoustic wave, which depends on the material properties. The biggest advantage of SBS for the presented application is the narrow bandwidth &#916;fSBS of the gain region. Thus, practically SBS forms a narrow linewidth optical filter. The narrow bandwidth of the gain region depends on the effective length and area of the fiber as well as on the used pump power19. The natural full-width at half-maximum (FWHM) bandwidth of the SBS gain in a SSMF is around 30 MHz. In special waveguides, such as AllWave fibers, and with high pump powers, the bandwidth can be reduced down to 10 MHz20. Due to the filter bandwidth the different copies are covered with an envelope. Therefore, the maximum storage time of the QLS inversely depends on the SBS bandwidth. A bandwidth of 10 MHz would result in a maximum storage time of 100 nsec. <a href="https://www.jove.com/files/ftp_upload/50468/50468fig3highres.jpg" target="_blank">Click here to view larger image.</a>
For very high bit-rate transmission the information has to be encoded into the phase of the carrier instead of its amplitude, since this offers a lot of advantages. Thus, contrary to pulses, the signals in these optical networks have constant amplitude. Figure 3 shows such a phase modulated signal in the time (left) and frequency domain (right). This spectrum can be sampled in the same way as that of the amplitude modulated signal21. In fact the spectrum of the rectangular function for intensity- and phase-modulated signals is filtered due to the transmission, which limits the spectrum.
<img alt="Figure 3" fo:content-width="5in" fo:src="/files/ftp_upload/50468/50468fig3highres.jpg" src="/files/ftp_upload/50468/50468fig3.jpg" /> 
Figure 3. Time-frequency coherence for a phase modulation21. In a phase modulated signal the phase of the carrier is changed by the signal which has to be transmitted. If each symbol consists of 1 bit, the phase is changed between 0 and &#960;, for instance. The left side of the figure shows the resulting time-domain representation for such a binary phase shift keyed (BPSK) signal. The resulting frequency-domain signal is shown on the right side. By comparison with Figure 1 it can be seen that the spectrum of the phase modulated signal is qualitatively the same as that of the intensity modulated signal. Thus, the QLS can be applied in the same way.

<table border="0" cellpadding="0" cellspacing="0" width="603">
	<tbody>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Laser diode</td>
			<td style="width:147px;">3S Photonics</td>
			<td style="width:185px;">A1905LMI</td>
			<td style="width:160px;">2x</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Laser Mount</td>
			<td style="width:147px;">Tektronix</td>
			<td style="width:185px;">LDH BFY-B2</td>
			<td style="width:160px;">2x</td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;width:111px;">Temperature Controller</td>
			<td style="width:147px;">LightWave</td>
			<td style="width:185px;">LDT-5948</td>
			<td style="width:160px;">2x</td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;width:111px;">Current Controller</td>
			<td style="width:147px;">LightWave</td>
			<td style="width:185px;">LDX-3220</td>
			<td style="width:160px;">2x</td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;width:111px;">Optical amplifier</td>
			<td style="width:147px;">High-Wave</td>
			<td style="width:185px;">HWT-EDFA-B-30-1-FC/PC</td>
			<td style="width:160px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Circulator</td>
			<td style="width:147px;">OFR</td>
			<td style="width:185px;">OCT-3-IR2</td>
			<td style="width:160px;"></td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;width:111px;">Waveform Generator</td>
			<td style="width:147px;">Tektronix</td>
			<td style="width:185px;">AWG7102</td>
			<td style="width:160px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Fiber 20km</td>
			<td style="width:147px;">OFS</td>
			<td style="width:185px;">AllWave-ZWP G652C-D</td>
			<td style="width:160px;"></td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;width:111px;">Polarization Controller</td>
			<td style="width:147px;">Thorlabs</td>
			<td style="width:185px;">Fiber Pol. Contr. IPC030</td>
			<td style="width:160px;">2x</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Modulator</td>
			<td style="width:147px;">Avanex</td>
			<td style="width:185px;">IM-10-P</td>
			<td style="width:160px;">Phase</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Modulator</td>
			<td style="width:147px;">Avanex</td>
			<td style="width:185px;">SD20</td>
			<td style="width:160px;">Amplitude, extract</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Modulator</td>
			<td style="width:147px;">Avanex</td>
			<td style="width:185px;">PowerBit F-10</td>
			<td style="width:160px;">Amplitude, data</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Modulator</td>
			<td style="width:147px;">Covega</td>
			<td style="width:185px;">Mach10</td>
			<td style="width:160px;">Amplitude, comb</td>
		</tr>
		<tr height="64">
			<td height="64" style="height:64px;width:111px;">Optical Spectrum Analyzer</td>
			<td style="width:147px;">Yokogawa</td>
			<td style="width:185px;">AQ6370C</td>
			<td style="width:160px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Oscilloscope</td>
			<td style="width:147px;">Agilent</td>
			<td style="width:185px;">DCA-J 86100C</td>
			<td style="width:160px;"></td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;width:111px;">Measurement Modul</td>
			<td style="width:147px;">Agilent</td>
			<td style="width:185px;">86106B</td>
			<td style="width:160px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Fiber Laser</td>
			<td style="width:147px;">Koheras</td>
			<td style="width:185px;">Adjustik</td>
			<td style="width:160px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Coupler</td>
			<td style="width:147px;">Newport</td>
			<td style="width:185px;">F-CPL-L22151-P</td>
			<td style="width:160px;">Ratio: 90/10</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Coupler</td>
			<td style="width:147px;">Newport</td>
			<td style="width:185px;">F-CPL-L12155-P</td>
			<td style="width:160px;">Ratio: 50/50</td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Power supply</td>
			<td style="width:147px;">Zentro-elektrik</td>
			<td style="width:185px;">LD 2x15/1 GB</td>
			<td style="width:160px;"></td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;width:111px;">Electrical amplifier</td>
			<td style="width:147px;">SHF</td>
			<td style="width:185px;">826H</td>
			<td style="width:160px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Supply port</td>
			<td style="width:147px;">SHF</td>
			<td style="width:185px;">B826</td>
			<td style="width:160px;"></td>
		</tr>
		<tr height="43">
			<td height="43" style="height:43px;width:111px;">Electrical amplifier</td>
			<td style="width:147px;">Amplifier Research</td>
			<td style="width:185px;">10W1000</td>
			<td style="width:160px;"></td>
		</tr>
		<tr height="22">
			<td height="22" style="height:22px;width:111px;">Photo diode</td>
			<td style="width:147px;">Newport</td>
			<td style="width:185px;">D-8ir</td>
			<td style="width:160px;"></td>
		</tr>
		<tr height="64">
			<td height="64" style="height:64px;width:111px;">Electrical spectrum analyzer</td>
			<td style="width:147px;">HP</td>
			<td style="width:185px;">8563E</td>
			<td style="width:160px;"></td>
		</tr>
	</tbody>
</table>

quasi-light storage for optical data packets

Today's telecommunication is based on optical packets which transmit the information in optical fiber networks around the world. Currently, the processing of the signals is done in the electrical domain. Direct storage in the optical domain would avoid the transfer of the packets to the electrical and back to the optical domain in every network node and, therefore, increase the speed and possibly reduce the energy consumption of telecommunications. However, light consists of photons which propagate with the speed of light in vacuum. Thus, the storage of light is a big challenge. There exist some methods to slow down the speed of the light, or to store it in excitations of a medium. However, these methods cannot be used for the storage of optical data packets used in telecommunications networks. Here we show how the time-frequency-coherence, which holds for every signal and therefore for optical packets as well, can be exploited to build an optical memory. We will review the background and show in detail and through examples, how a frequency comb can be used for the copying of an optical packet which enters the memory. One of these time domain copies is then extracted from the memory by a time domain switch. We will show this method for intensity as well as for phase modulated signals.

For the measurement a 10110101 intensity modulated data pattern with a data rate of 1 Gbps was used. The black line in Figure&#160;6 represents the original signal and the colored lines represent the different storage times achieved with the QLS.&#160; The reference is measured without the QLS and the deactivated switch at the output. Under ideal conditions storage times up to 100&#8239;nsec are achievable. The results for the stored 11001101 data pattern of a phase modulated signal, again with a data ra...

Watch this Scientific Journal Video about Quasi-light Storage for Optical Data Packets at JoVE.com

Quasi-light Storage for Optical Data Packets

The article describes a procedure to store optical data packets with an arbitrary modulation, wavelength, and data rate. These packets are the basis of modern telecommunications.

Today's telecommunication is based on optical packets which transmit the information in optical fiber networks around the world. Currently, the processing ...

Research

Education

JoVE Core

JoVE Journal

Electrical Engineering

Engineering

Unit 1

Linear Time- Invariant Systems

SCIENTISTS IN ACTION

Construction and Testing of Coin Cells of Lithium Ion Batteries

Rechargeable lithium ion batteries have wide applications in electronics, where customers always demand more capacity and longer lifetime.  Lithium ion ...

Fabricating Metamaterials Using the Fiber Drawing Method

Metamaterials are man-made composite materials, fabricated by assembling components much smaller than the wavelength at which they operate 1. They owe ...

Optical Trapping of Nanoparticles

Optical trapping is a technique for immobilizing and manipulating small objects in a gentle way using light, and it has been widely applied in trapping ...

Bringing the Visible Universe into Focus with Robo-AO

The angular  resolution of ground-based optical telescopes is limited by the degrading  effects of the turbulent atmosphere. In the absence of an ...

The Generation of Higher-order Laguerre-Gauss Optical Beams for High-precision Interferometry

Thermal noise in high-reflectivity mirrors is a major impediment for several  types of high-precision interferometric experiments that aim to reach the  ...

Fabrication and Characterization of Disordered Polymer Optical Fibers for Transverse Anderson Localization of Light

We develop and characterize a disordered polymer optical fiber that uses transverse Anderson localization as a novel waveguiding mechanism. The developed ...

Writing Bragg Gratings in Multicore Fibers

Fiber Bragg gratings in multicore fibers can be used as compact and robust filters in astronomical and other research and commercial applications. Strong ...

Compact Lens-less Digital Holographic Microscope for MEMS Inspection and Characterization

A micro-electro-mechanical-system (MEMS) is a widely used component in many industries, including energy, biotechnology, medical, communications, and ...

Data Acquisition Protocol for Determining Embedded Sensitivity Functions

The effectiveness of many structural health monitoring techniques depends on the placement of sensors and the location of input forces. Algorithms for ...