Name: simulation of human-induced vibrations based on the characterized in-field pedestrian behavior
Uploaded: 2016-04-13T13:00:00
Description: Watch this Scientific Journal Video about Simulation of Human-induced Vibrations Based on the Characterized In-field Pedestrian Behavior at JoVE.com

The experiments involving walking individuals are performed in cooperation with Movement &#38; posture Analysis Laboratory Leuven (MALL)25. Their cooperation and support is gratefully acknowledged.

All procedures were approved by the ethical committee of the university hospital of the KU Leuven and each subject gave a written informed consent prior to participation.
1. 3D Motion Tracking: Configuration and Data Acquisition
<ol>
	<li>Ensure that the individual sensors are fully charged (Figure 1A). This step takes about 1 hr but can be performed on the days prior to the actual measurements. Follow the manufacturer&#39;s charging protocol.</li>
	<li>MT Manager &#8212; Da...

<ol>
	<li>Bachmann, H., Ammann, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Bachmann vibrations in structures : induced by man and machines. , (1987).</li><li>. MTw User Manual Available from: <a target="_blank" href="https://www.xsens.com/download/usermanual/MTw_usermanual.pdf">https://www.xsens.com/download/usermanual/MTw_usermanual.pdf</a> (2013)</li><li>Van Nimmen, K., Lombaert, G., Jonkers, I., De Roeck, G., Vanden Broeck, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterisation+of+walking+loads+by+3D+inertial+motion+tracking.">Characterisation of walking loads by 3D inertial motion tracking.</a> J. Sound Vib. 333 (20), 1-15 (2013).</li><li>Northern Digital Inc. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> TrueImpulse Kinetic Measurement System User Guide. , (2013).</li><li>Racic, V., Pavic, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mathematical+model+to+generate+near-periodic+human+jumping+force+signals.">Mathematical model to generate near-periodic human jumping force signals.</a> Mech. Syst. Signal Process. 24 (1), 138-152 (2010).</li><li>The MathWorks Inc. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> MATLAB and Signal Processing Toolbox Release. , (2014).</li><li>Van Nimmen, K., Van den Broeck, P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> PediVib 1.0 - A MATLAB toolbox for the simulation of human-induced vibrations. , (2015).</li><li>Li, Q., Fan, J., Nie, J., Li, Q., Chen, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Crowd-induced+random+vibration+of+footbridge+and+vibration+control+using+multiple+tuned+mass+dampers.">Crowd-induced random vibration of footbridge and vibration control using multiple tuned mass dampers.</a> J. Sound Vib. 329 (19), 4068-4092 (2010).</li><li>Van Nimmen, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Numerical and experimental study of human-induced vibrations of footbridges [dissertation]. , (2015).</li><li>Middleton, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Dynamic performance of high frequency floors [dissertation]. , (2009).</li><li>Ing&#242;lfsson, E. T., Georgakis, C. T., Ricciardelli, F., J&#246;nsson, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Experimental+identification+of+pedestrian-induced+lateral+forces+on+footbridges.">Experimental identification of pedestrian-induced lateral forces on footbridges.</a> J. Sound Vib. 330 (6), 1265-1284 (2011).</li><li>Racic, V., Brownjohn, J. M. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mathematical+modelling+of+random+narrow+band+lateral+excitation+of+footbridges+due+to+pedestrians+walking.">Mathematical modelling of random narrow band lateral excitation of footbridges due to pedestrians walking.</a> Comput. Struct. 90-91 (1), 116-130 (2012).</li><li>Reynders, E., Roeck, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=De+Reference-based+combined+deterministic-stochastic+subspace+identification+for+experimental+and+operational+modal+analysis.">De Reference-based combined deterministic-stochastic subspace identification for experimental and operational modal analysis.</a> Mech. Syst. Signal Process. 22 (3), 617-637 (2008).</li><li>Bocian, M., Macdonald, J. H. G., Burn, J. F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biomechanically+inspired+modeling+of+pedestrian-induced+vertical+self-excited+forces.">Biomechanically inspired modeling of pedestrian-induced vertical self-excited forces.</a> J. Bridg. Eng. 18 (12), 1336-1346 (2013).</li><li>&#381;ivanovi&#263;, S., Pavi&#263;, A., Ing&#242;lfsson, E. T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Modeling+spatially+unrestricted+pedestrian+traffic+on+footbridges.">Modeling spatially unrestricted pedestrian traffic on footbridges.</a> Journal of Structural Engineering. 136 (10), 1296-1308 (2010).</li><li>Agu, E., Kasperski, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Influence+of+the+random+dynamic+parameters+of+the+human+body+on+the+dynamic+characteristics+of+the+coupled+system+of+structurecrowd.">Influence of the random dynamic parameters of the human body on the dynamic characteristics of the coupled system of structurecrowd.</a> J. Sound Vib. 330 (3), 431-444 (2011).</li><li>. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Vicon Motion Systems Product Manuals. , (2012).</li><li>. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> CODAmotion Technical data sheet. , (2012).</li><li>Meichtry, A., Romkes, J., Gobelet, C., Brunner, R., M&#252;ller, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Criterion+validity+of+3D+trunk+accelerations+to+assess+external+work+and+power+in+able-bodied+gait.">Criterion validity of 3D trunk accelerations to assess external work and power in able-bodied gait.</a> Gait Posture. 25 (1), 25-32 (2007).</li><li>Jung, Y., Jung, M., Lee, K., Koo, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ground+reaction+force+estimation+using+an+insole-type+pressure+mat+and+joint+kinematics+during+walking.">Ground reaction force estimation using an insole-type pressure mat and joint kinematics during walking.</a> J. Biomech. 47 (11), 2693-2699 (2014).</li><li>Liedtke, C., Fokkenrood, S. A., Menger, J. T., van der Kooij, H., Veltink, P. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evaluation+of+instrumented+shoes+for+ambulatory+assessment+of+ground+reaction+forces.">Evaluation of instrumented shoes for ambulatory assessment of ground reaction forces.</a> Gait Posture. 26 (1), 39-47 (2007).</li><li>Boutaayamou, M., Schwartz, C., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Validated+extraction+of+gait+events+from+3D+accelerometer+recordings.">Validated extraction of gait events from 3D accelerometer recordings.</a> , 6-9 (2012).</li><li>Kavanagh, J. J., Menz, H. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Accelerometry:+A+technique+for+quantifying+movement+patterns+during+walking.">Accelerometry: A technique for quantifying movement patterns during walking.</a> Gait Posture. 28 (1), 1-15 (2008).</li><li>. MALL: Movement and posture Analysis Laboratory Leuven (Interdepartemental research laboratory at the Faculty of Kinisiology and Rehabilitation Sciences) Available from: <a target="_blank" href="https://faber.kuleuven.be/MALL/mall.php">https://faber.kuleuven.be/MALL/mall.php</a> (2015)</li></ol>

The human motion and resulting GRFs are usually identified by the application of force plates, instrumented treadmills as well as optical motion capture technology such as Vicon18 and CODA19. The application of these techniques is, however, restricted to the laboratory environment. In answer to this drawback, the potential of innovative techniques that permit the measurement of &#39;natural&#39; person behavior over many repeated and uninterrupted cycles is currently investigated20. Alter...

Driven by the economic demand of efficiency and the increasing strength of (new) materials, architects and engineers are pushing the limits to build ever longer, taller and lighter structures. Typically, light and slender structures have one or more natural frequencies that lie within the dominant spectrum of common human activities such as walking, running or jumping. Likely to be subject to (near-)resonant excitation, they are often unduly responsive to human motion, resulting in disturbing or even harmful vibrations1. For these slender and lightweight structures, the vibration serviceability is a matter of growing concern, often constituting the critical design requirement.
The human motion and the resulting ground reaction forces (GRFs) are usually experimentally identified in laboratory conditions. Currently, designers are forced to rely on &#8212; what are assumed to be &#39;conservative&#39;&#160;&#8212; equivalent load models, upscaled from single-person force measurements. With designs governed by the dynamic performance under high crowd densities, a strong demand exists for the verification and refinement of the currently available load models.
The present protocol employs a 3D inertial motion tracking technique for the characterization of the natural motion of pedestrians. It is shown how this information can be used to define the correlation among the pedestrians as well as the corresponding induced loads. In a subsequent step, the characterized pedestrian behavior is used to numerically simulate the induced structural response. Comparison with the registered structural response allows to quantify the effect of unaccounted human-structure interaction phenomena, e.g., the added damping due to the presence of the pedestrians. The methodology is illustrated for full-scale experiments on a real footbridge where the structural response and the motion of the participants are registered simultaneously.

<table border="0" cellpadding="0" cellspacing="0" width="1081">
	<tbody>
		<tr height="65">
			<td height="65" style="height:65px;width:301px;">MTw Development Kit + MT Manager Software</td>
			<td style="width:107px;">Xsens</td>
			<td style="width:280px;">MTW-38A70G20-1</td>
			<td style="width:393px;">Development kit with wireless, highly accurate, small and lightweight 3D human motion trackers and accompanying click-in full body straps.</td>
		</tr>
		<tr height="65">
			<td height="65" style="height:65px;width:301px;">True Impulse Kinetic Measurement System + NDI Open Capture Data Acquisition and Visualization System</td>
			<td style="width:107px;">NDI Northern Digital Inc.</td>
			<td style="width:280px;">791028</td>
			<td style="width:393px;">TrueImpulse measures reaction forces exerted by humans during a wide variety of activities.</td>
		</tr>
		<tr height="65">
			<td height="65" style="height:65px;width:301px;">GMS-24</td>
			<td style="width:107px;">GeoSIG Ltd</td>
			<td style="width:280px;">Rev. 03.08.2010</td>
			<td style="width:393px;">(Wireless) accelerometers to register the structural vibrations.</td>
		</tr>
		<tr height="65">
			<td height="65" style="height:65px;width:301px;">GeoDAS GeoSIG Data Acquisition System</td>
			<td style="width:107px;">GeoSIG Ltd</td>
			<td style="width:280px;">Rev. 03.08.2010</td>
			<td style="width:393px;">Graphical MS Windows application running under Windows 9x/NT/2000, providing a software interface between users and GeoSIG recorders GSR/GCR/GBV/GT.</td>
		</tr>
		<tr height="65">
			<td height="65" style="height:65px;width:301px;">PediVib toolbox</td>
			<td style="width:107px;">KU Leuven</td>
			<td style="width:280px;">/</td>
			<td style="width:393px;">Software interface/toolbox to simulate the structural vibrations induced by pedestrians.</td>
		</tr>
		<tr height="63">
			<td height="63" style="height:63px;width:301px;">Metronome</td>
			<td style="width:107px;">/</td>
			<td style="width:280px;">/</td>
			<td style="width:393px;">A device to indicate the targetted pacing rate of the activity (free applications are available online for pc/laptop/smartphone).</td>
		</tr>
	</tbody>
</table>

simulation of human-induced vibrations based on the characterized in-field pedestrian behavior

For slender and lightweight structures, vibration serviceability is a matter of growing concern, often constituting the critical design requirement. With designs governed by the dynamic performance under human-induced loads, a strong demand exists for the verification and refinement of currently available load models. The present contribution uses a 3D inertial motion tracking technique for the characterization of the in-field pedestrian behavior. The technique is first tested in laboratory experiments with simultaneous registration of the corresponding ground reaction forces. The experiments include walking persons as well as rhythmical human activities such as jumping and bobbing. It is shown that the registered motion allows for the identification of the time variant pacing rate of the activity. Together with the weight of the person and the application of generalized force models available in literature, the identified time-variant pacing rate allows to characterize the human-induced loads. In addition, time synchronization among the wireless motion trackers allows identifying the synchronization rate among the participants. Subsequently, the technique is used on a real footbridge where both the motion of the persons and the induced structural vibrations are registered. It is shown how the characterized in-field pedestrian behavior can be applied to simulate the induced structural response. It is demonstrated that the in situ identified pacing rate and synchronization rate constitute an essential input for the simulation and verification of the human-induced loads. The main potential applications of the proposed methodology are the estimation of human-structure interaction phenomena and the development of suitable models for the correlation among pedestrians in real traffic conditions.

First, it is shown how the accelerations registered near the CoM of the individuals can be used to characterize the consequent GRFs. The results are discussed here for a walking individual3. Fully comparable observations are made when rhythmical human activities, i.e., jumping and bobbing, are considered. Figure 7A and 7B show that the amplitude spectrum of the continuous vertical foot forces and the corresponding acceleration levels r...

Watch this Scientific Journal Video about Simulation of Human-induced Vibrations Based on the Characterized In-field Pedestrian Behavior at JoVE.com

Simulation of Human-induced Vibrations Based on the Characterized In-field Pedestrian Behavior

A protocol is presented for the characterization of the in-field pedestrian behavior and the simulation of the resulting structural response. Field-tests demonstrate that the in situ identified pacing rate and synchronization rate among the participants constitute an essential input for the simulation and verification of the human-induced loads.

For slender and lightweight structures, vibration serviceability is a matter of growing concern, often constituting the critical design requirement. With ...

Research

Education

JoVE Journal

JoVE Core

Engineering

Physics

Mechanical Engineering

Unit 1

Kinetics of a Particle: Force and Acceleration

Motion Along a Straight Line

SCIENTISTS IN ACTION

Simulation, Fabrication and Characterization of THz Metamaterial Absorbers

THz Metamaterial Absorbers 시뮬레이션, 제조 및 특성

Metamaterials (MM),  artificial materials engineered to have properties that may not be found in  nature, have been widely explored since the first ...

연구

공학

Simulation of the Planetary Interior Differentiation Processes in the Laboratory

행성 내부의 분화의 시뮬레이션 실험실에서 처리

A planetary interior is under high-pressure and high-temperature conditions and it has a layered structure. There are two important processes that led to ...

Laboratory Drop Towers for the Experimental Simulation of Dust-aggregate Collisions in the Early Solar System

For the purpose of investigating the evolution of dust aggregates in the early Solar System, we developed two vacuum drop towers in which fragile dust ...

Selective Area Modification of Silicon Surface Wettability by Pulsed UV Laser Irradiation in Liquid Environment

액체 환경에서의 펄스 자외선 레이저 조사에 의한 실리콘 표면의 젖음성의 선택 영역 수정

The wettability of silicon (Si) is one of the important parameters in the technology of surface functionalization of this material and fabrication of ...

Knowledge Based Cloud FE Simulation of Sheet Metal Forming Processes

시트 금속 성형 공정에 대한 지식을 바탕으로 클라우드 FE 시뮬레이션

The use of Finite Element (FE) simulation software to adequately predict the outcome of sheet metal forming processes is crucial to enhancing the ...

Effect of Bending on the Electrical Characteristics of Flexible Organic Single Crystal-based Field-effect Transistors

유연한 유기 단결정 기반 전계 효과 트랜지스터의 전기적 특성에 영향 절곡

The charge transport in an organic semiconductor depends highly on the molecular packing in the crystal, which influences the electronic coupling ...

Preparation and High-temperature Anti-adhesion Behavior of a Slippery Surface on Stainless Steel

Anti-adhesion surfaces with high-temperature resistance have a wide application potential in electrosurgical instruments, engines, and pipelines. A ...

Study of Siphon Breaker Experiment and Simulation for a Research Reactor

연구 반응 기에 대 한 사이 펀 브 레이 커 실험 및 시뮬레이션 연구

Under the design conditions of a research reactor, the siphon phenomenon induced by pipe rupture can cause continuous outward flow of water. To prevent ...

Predicting Catalyst Extrudate Breakage Based on the Modulus of Rupture

The mechanical strength of extruded catalysts and their natural or forced breakage by either collision against a surface or by a compressive load in a ...

Fabrication of Flexible Image Sensor Based on Lateral NIPIN Phototransistors

측면 NIPIN 포토 트랜지스터에 따라 유연한 이미지 센서의 제조

Flexible photodetectors have been intensely studied for the use of curved image sensors, which are a crucial component in bio-inspired imaging systems, ...