Name: microscopy of fission yeast sexual lifecycle
Uploaded: 2016-03-09T15:00:00
Description: Watch this Scientific Journal Video about Microscopy of Fission Yeast Sexual Lifecycle at JoVE.com

AV foi apoiado por uma bolsa de pós-doutorado de longo prazo EMBO. Pesquisa no laboratório de Martin é financiado por uma bolsa ERC Starting (GeometryCellCycle) e uma subvenção Science Foundation Nacional Suíço (31003A_155944) para SGM.

análise de microscopia de reprodução sexual levedura 1. Preparação de Meios <ol><li> Prepare meio de esporulação Mínimo (MSL-N) 15 por mistura dos seguintes componentes: Glucose: 10 g / l, KH 2 PO 4: 1 g / L, NaCl: 0,1 g / L, MgSO4 · 7H 2 O: 0,2 g / EU. Adicionar oligoelementos (10.000x): 100 uL / L, vitaminas (1.000X): 1 mL / L, e 0,1 M de CaCl2 &#160; ml / L. Filtro-esterilizar utilizando um filtro de tamanho de poro de 0,2...

<ol>
	<li>Mata, J., Bahler, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Global+roles+of+Ste11p,+cell+type,+and+pheromone+in+the+control+of+gene+expression+during+early+sexual+differentiation+in+fission+yeast.">Global roles of Ste11p, cell type, and pheromone in the control of gene expression during early sexual differentiation in fission yeast.</a> Proc Natl Acad Sci U S A. 103 (42), 15517-15522 (2006).</li><li>Xue-Franzen, Y., Kjaerulff, S., Holmberg, C., Wright, A., Nielsen, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Genomewide+identification+of+pheromone-targeted+transcription+in+fission+yeast.">Genomewide identification of pheromone-targeted transcription in fission yeast.</a> BMC Genomics. 7, 303 (2006).</li><li>Klar, A. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Lessons+learned+from+studies+of+fission+yeast+mating-type+switching+and+silencing.">Lessons learned from studies of fission yeast mating-type switching and silencing.</a> Annu Rev Genet. 41, 213-236 (2007).</li><li>Beach, D. H., Klar, A. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Rearrangements+of+the+transposable+mating-type+cassettes+of+fission+yeast.">Rearrangements of the transposable mating-type cassettes of fission yeast.</a> EMBO J. 3 (3), 603-610 (1984).</li><li>Merlini, L., Dudin, O., Martin, S. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mate+and+fuse:+how+yeast+cells+do+it.">Mate and fuse: how yeast cells do it.</a> Open Biol. 3 (3), 130008 (2013).</li><li>Mochizuki, N., Yamamoto, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Reduction+in+the+intracellular+cAMP+level+triggers+initiation+of+sexual+development+in+fission+yeast.">Reduction in the intracellular cAMP level triggers initiation of sexual development in fission yeast.</a> Mol Gen Genet. 233 (1-2), 17-24 (1992).</li><li>Sugimoto, A., Iino, Y., Maeda, T., Watanabe, Y., Yamamoto, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Schizosaccharomyces+pombe+ste11++encodes+a+transcription+factor+with+an+HMG+motif+that+is+a+critical+regulator+of+sexual+development.">Schizosaccharomyces pombe ste11+ encodes a transcription factor with an HMG motif that is a critical regulator of sexual development.</a> Genes Dev. 5 (11), 1990-1999 (1991).</li><li>Kjaerulff, S., Lautrup-Larsen, I., Truelsen, S., Pedersen, M., Nielsen, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Constitutive+activation+of+the+fission+yeast+pheromone-responsive+pathway+induces+ectopic+meiosis+and+reveals+ste11+as+a+mitogen-activated+protein+kinase+target.">Constitutive activation of the fission yeast pheromone-responsive pathway induces ectopic meiosis and reveals ste11 as a mitogen-activated protein kinase target.</a> Mol Cell Biol. 25 (5), 2045-2059 (2005).</li><li>Obara, T., Nakafuku, M., Yamamoto, M., Kaziro, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Isolation+and+characterization+of+a+gene+encoding+a+G-protein+alpha+subunit+from+Schizosaccharomyces+pombe:+involvement+in+mating+and+sporulation+pathways.">Isolation and characterization of a gene encoding a G-protein alpha subunit from Schizosaccharomyces pombe: involvement in mating and sporulation pathways.</a> Proc Natl Acad Sci U S A. 88 (13), 5877-5881 (1991).</li><li>Toda, T., Shimanuki, M., Yanagida, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fission+yeast+genes+that+confer+resistance+to+staurosporine+encode+an+AP-1-like+transcription+factor+and+a+protein+kinase+related+to+the+mammalian+ERK1/MAP2+and+budding+yeast+FUS3+and+KSS1+kinases.">Fission yeast genes that confer resistance to staurosporine encode an AP-1-like transcription factor and a protein kinase related to the mammalian ERK1/MAP2 and budding yeast FUS3 and KSS1 kinases.</a> Genes Dev. 5 (1), 60-73 (1991).</li><li>Bendezu, F. O., Martin, S. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cdc42+explores+the+cell+periphery+for+mate+selection+in+fission+yeast.">Cdc42 explores the cell periphery for mate selection in fission yeast.</a> Curr Biol. 23 (1), 42-47 (2013).</li><li>Dudin, O., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+formin-nucleated+actin+aster+concentrates+cell+wall+hydrolases+for+cell+fusion+in+fission+yeast.">A formin-nucleated actin aster concentrates cell wall hydrolases for cell fusion in fission yeast.</a> J Cell Biol. 208 (7), 897-911 (2015).</li><li>Chikashige, Y., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Telomere-led+premeiotic+chromosome+movement+in+fission+yeast.">Telomere-led premeiotic chromosome movement in fission yeast.</a> Science. 264 (5156), 270-273 (1994).</li><li>Bahler, J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Heterologous+modules+for+efficient+and+versatile+PCR-based+gene+targeting+in+Schizosaccharomyces+pombe.">Heterologous modules for efficient and versatile PCR-based gene targeting in Schizosaccharomyces pombe.</a> Yeast. 14 (10), 943-951 (1998).</li><li>Egel, R., Willer, M., Kjaerulff, S., Davey, J., Nielsen, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Assessment+of+pheromone+production+and+response+in+fission+yeast+by+a+halo+test+of+induced+sporulation.">Assessment of pheromone production and response in fission yeast by a halo test of induced sporulation.</a> Yeast. 10 (10), 1347-1354 (1994).</li><li>Tran, P. T., Marsh, L., Doye, V., Inoue, S., Chang, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+mechanism+for+nuclear+positioning+in+fission+yeast+based+on+microtubule+pushing.">A mechanism for nuclear positioning in fission yeast based on microtubule pushing.</a> J Cell Biol. 153 (2), 397-411 (2001).</li><li>Pedelacq, J. D., Cabantous, S., Tran, T., Terwilliger, T. C., Waldo, G. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Engineering+and+characterization+of+a+superfolder+green+fluorescent+protein.">Engineering and characterization of a superfolder green fluorescent protein.</a> Nat Biotechnol. 24 (1), 79-88 (2006).</li><li>Kitamura, K., Shimoda, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Schizosaccharomyces+pombe+mam2+gene+encodes+a+putative+pheromone+receptor+which+has+a+significant+homology+with+the+Saccharomyces+cerevisiae+Ste2+protein.">The Schizosaccharomyces pombe mam2 gene encodes a putative pheromone receptor which has a significant homology with the Saccharomyces cerevisiae Ste2 protein.</a> EMBO J. 10 (12), 3743-3751 (1991).</li><li>Tanaka, K., Davey, J., Imai, Y., Yamamoto, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Schizosaccharomyces+pombe+map3++encodes+the+putative+M-factor+receptor.">Schizosaccharomyces pombe map3+ encodes the putative M-factor receptor.</a> Mol Cell Biol. 13 (1), 80-88 (1993).</li><li>Motegi, F., Arai, R., Mabuchi, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Identification+of+two+type+V+myosins+in+fission+yeast,+one+of+which+functions+in+polarized+cell+growth+and+moves+rapidly+in+the+cell.">Identification of two type V myosins in fission yeast, one of which functions in polarized cell growth and moves rapidly in the cell.</a> Mol Biol Cell. 12 (5), 1367-1380 (2001).</li><li>Sajiki, K., Pluskal, T., Shimanuki, M., Yanagida, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Metabolomic+analysis+of+fission+yeast+at+the+onset+of+nitrogen+starvation.">Metabolomic analysis of fission yeast at the onset of nitrogen starvation.</a> Metabolites. 3 (4), 1118-1129 (2013).</li><li>Miyawaki, A., Nagai, T., Mizuno, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mechanisms+of+protein+fluorophore+formation+and+engineering.">Mechanisms of protein fluorophore formation and engineering.</a> Curr Opin Chem Biol. 7 (5), 557-562 (2003).</li><li>Dyer, J. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tracking+shallow+chemical+gradients+by+actin-driven+wandering+of+the+polarization+site.">Tracking shallow chemical gradients by actin-driven wandering of the polarization site.</a> Curr Biol. 23 (1), 32-41 (2013).</li><li>Beta, C., Bodenschatz, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microfluidic+tools+for+quantitative+studies+of+eukaryotic+chemotaxis.">Microfluidic tools for quantitative studies of eukaryotic chemotaxis.</a> Eur J Cell Biol. 90 (10), 811-816 (2011).</li><li>Lee, S. S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantitative+and+dynamic+assay+of+single+cell+chemotaxis.">Quantitative and dynamic assay of single cell chemotaxis.</a> Integr Biol (Camb). 4 (4), 381-390 (2012).</li></ol>

condições ambientais e disponibilidade de nutrientes em particular, afetam fortemente a fisiologia da levedura de fissão. Privação de nitrogênio é necessário para compromisso com a reprodução sexual e, inicialmente, leva a mudanças marcantes na progressão do ciclo celular mitótico (Ref. 21 e Figura 2). Após a remoção do azoto população em crescimento exponencial, o tamanho das células em divisão diminui rapidamente (Figura 2C) e a maioria das células dete...

Apesar de intercâmbio genético entre duas células é o evento central na reprodução sexual, ele depende de uma cadeia de eventos que promovem a diferenciação celular, permitem a escolha do parceiro, realizar a fusão célula-célula e manter a estabilidade genômica. Assim, o ciclo de vida sexual se apresenta como um sistema modelo para estudar uma série de questões biológicas sobre interruptores de desenvolvimento, resposta a estímulos extrínsecos, a fusão da membrana plasmática, segregação cromossômica, etc. Explorando a levedura ciclo sexual para estudar esses fenômenos traz os benefícios da genética poderosos do sistema modelo, bem estabelecida abordagens de alto rendimento e de microscopia sofisticado. Sexo em levedura é um evento heterotípica entre uma célula e um P-célula M de tipos de cruzamento distintos. Os dois tipos de células expressam diferencialmente uma série de genes de 1,2, incluindo aqueles para a produção do ácido P- segregada e M-feromonas,-receptores de feromonas map3 e Mam2 bem como feromona-Proteases Sxa1 e Sxa2. Homotálico estirpes, tais como a estirpe H90 comumente utilizado, transportar a informação genética para os dois tipos de acasalamento em um único genoma e as células sofrem um padrão complexo de tipo de acasalamento de comutação ao longo do ciclo de vida do mitótico (revisto em Ref. 3). Vários isolados de levedura heterotálicas que raramente ou nunca mudar tipo de acasalamento também são comumente utilizados 4, o mais proeminente o h + N (P-tipo) e as cepas h S (M-tipo). Em levedura, a entrada no ciclo de vida sexual está sob regulação nutricional rigorosa. Apenas células de levedura de fissão deficientes em nitrogênio prender reprodução mitótico e produzir feromônios difusï¿½eis para sinalizar a presença de um parceiro de acasalamento e promover novas etapas do ciclo sexual (revisto em Ref. 5). privação de azoto de-reprime o regulador transcricional chave de Ste11 de acoplamento que funciona como um interruptor de desenvolvimento e promove expression de acasalamento genes específicos, incluindo o receptor de feromônio e o feromônio genes de produção de 6,7. Engajamento-receptor de feromônio ativa a proteína-acoplado receptor G-alfa e de sinalização MAPK a jusante que aumenta ainda mais Ste11 atividade transcricional 8-10, aumentando assim a produção de feromônio em um feedback positivo entre os parceiros de acasalamento. Níveis de feromonas são cruciais para induzir diferentes estados de polarização celular, regulando o organizador mestre da polaridade celular, a Rho-família GTPase Cdc42 11. Após a exposição a baixas concentrações de feromonas, Cdc42 activo é visualizado em manchas dinâmicos explorando a periferia da célula, e nenhum crescimento de células é observada nesta fase. níveis de feromônio aumento promover a estabilização da actividade Cdc42 a uma única zona e crescimento de uma projeção polarizada, denominado o shmoo, que traz células parceiras em contato. Posteriormente, os dois parceiros de acasalamento haplóide fundir para formar um zigoto diplóide. Um trabalho recente revela the existência de uma estrutura nova actina essencial para a fusão que é montado pela formin induzida por acasalamento FUS1 12. Este enfoque de fusão concentra processos dependentes tipo V-miosina e posiciona a maquinaria degradação da parede celular, permitindo, assim, a remodelação da parede celular para permitir o contacto da membrana plasmática, sem lise celular 12. Após a fusão célula-célula, os núcleos entram em contato e passam por cariogamia. Um movimento de vai-e-vem dependente da dineína proeminente dentro do núcleo do zigoto (o movimento do cavalo-cauda), em seguida, promove o emparelhamento de homólogos do cromossoma 13,14, que é seguido por meiose. Finalmente, os quatro produtos de meiose são embalados em esporos individuais durante a esporulação. Devido à sua complexidade e os numerosos passos envolvidos, monitoramento detalhado do acasalamento tem sido um desafio. Duas dificuldades notáveis ​​são que todo o processo leva bem mais de 15 horas e que as células são difíceis de sincronizar. estes difficulties são contornadas por abordagens de microscopia de uma única célula. Aqui um protocolo geral para investigar o ciclo de vida sexual na levedura de fissão é apresentado. Com pequenos ajustes, este protocolo permite o estudo de todas as diferentes etapas do processo, ou seja, a indução de produto do gene de acasalamento, a polarização celular e emparelhamento entre irmãos células após tipo de acasalamento de comutação e entre os parceiros não-irmã, a fusão célula-célula, e pós-fusão horse-tail movimento, a meiose e esporulação. Este método permite 1) visualizar facilmente fluorescente etiquetado proteínas ao longo do tempo pré, durante e pós-fusão; 2) discriminar o comportamento das células do tipo de cruzamento oposto; e 3) medir e quantificar parâmetros como shmooing, mating, fusão ou eficiência esporulação.

<table border="0" cellpadding="0" cellspacing="0" width="667">
	<tbody>
		<tr height="17">
			<td height="17" style="height:17px;width:219px;">Glucose</td>
			<td style="width:117px;">Sigma-Aldrich</td>
			<td style="width:108px;">G8270-10KG</td>
			<td style="width:224px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">KH2PO4</td>
			<td>Sigma-Aldrich</td>
			<td>1.05108.0050</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">NaCl</td>
			<td>Sigma-Aldrich</td>
			<td>71381</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">MgSO4.7H2O</td>
			<td>Sigma-Aldrich</td>
			<td>63140</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">CaCl2</td>
			<td>Sigma-Aldrich</td>
			<td>12095</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Pantothenate</td>
			<td>AppliChem</td>
			<td>A2088,0025</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Nicotinic Acid</td>
			<td>AppliChem</td>
			<td>A0963,0100</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Inositol</td>
			<td>AppliChem</td>
			<td>A1716,0100</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Biotin</td>
			<td>AppliChem</td>
			<td>A0967,0250</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Boric Acid</td>
			<td>Sigma-Aldrich</td>
			<td>B6768-1KG</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">MnSO4</td>
			<td>AppliChem</td>
			<td>A1038,0250</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">ZnSO4.7H2O&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>Z4750</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">FeCl2.6H2O</td>
			<td>AppliChem</td>
			<td>A3514,0250</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Molybdenum oxide (VI) (MoO3)</td>
			<td>Sigma-Aldrich</td>
			<td>69850</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">KI</td>
			<td>AppliChem</td>
			<td>A3872,0100</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">CuSO4.5H2O</td>
			<td>AppliChem</td>
			<td>A1034,0500</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Citric Acid&#160;</td>
			<td>AppliChem</td>
			<td>A2344,0500</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Agarose</td>
			<td>Promega</td>
			<td>V3125</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">(NH4)2SO4&#160;</td>
			<td>Merck</td>
			<td>1.01217.1000</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">L-Leucine</td>
			<td>Sigma-Aldrich</td>
			<td>L8000-100G</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Adenine Hemisulfat Salt, mini 99%</td>
			<td>Sigma-Aldrich</td>
			<td>A9126-100G</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Uracil&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>U0750</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Lanolin</td>
			<td>Sigma-Aldrich</td>
			<td>L7387</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Vaseline</td>
			<td>Reactolab</td>
			<td>92045-74-4</td>
			<td></td>
		</tr>
		<tr height="17">
			<td height="17" style="height:17px;">Paraffin</td>
			<td>Reactolab</td>
			<td>7005600</td>
			<td></td>
		</tr>
	</tbody>
</table>

microscopy of fission yeast sexual lifecycle

The fission yeast Schizosaccharomyces pombe has been an invaluable model system in studying the regulation of the mitotic cell cycle progression, the mechanics of cell division and cell polarity. Furthermore, classical experiments on its sexual reproduction have yielded results pivotal to current understanding of DNA recombination and meiosis. More recent analysis of fission yeast mating has raised interesting questions on extrinsic stimuli response mechanisms, polarized cell growth and cell-cell fusion. To study these topics in detail we have developed a simple protocol for microscopy of the entire sexual lifecycle. The method described here is easily adjusted to study specific mating stages. Briefly, after being grown to exponential phase in a nitrogen-rich medium, cell cultures are shifted to a nitrogen-deprived medium for periods of time suited to the stage of the sexual lifecycle that will be explored. Cells are then mounted on custom, easily built agarose pad chambers for imaging. This approach allows cells to be monitored from the onset of mating to the final formation of spores.

Fissão crescimento do fermento e Acasalamento Dynamics após a remoção da fonte de nitrogênio Como privação de nitrogênio é um pré-requisito para o início da reprodução sexual na levedura de fissão, estirpe de tipo selvagem H90 homotálico foi monitorada mediante mudança de para médio privado de azoto rico em nitrogênio (Figura 2), seguindo o protocolo apresentado na Figura 1. Resumidamente, as células foram cultivadas O ...

Watch this Scientific Journal Video about Microscopy of Fission Yeast Sexual Lifecycle at JoVE.com

Microscopy of Fission Yeast Sexual Lifecycle

We provide a reproducible basic method for the long-term microscopy of the fission yeast sexual lifecycle. With minor adjustments described, the presented protocol allows research focus on different steps of the reproductive process.

Microscopia do ciclo de vida sexual por fissão de levedura

The fission yeast Schizosaccharomyces pombe has been an invaluable model system in studying the regulation of the mitotic cell cycle progression, the ...

The overall goal of this method is to monitor the entire sexual reproduction process in fission yeast by light microscopy. This method describes the preparation of fission yeast cells for time-lapse imaging of various stages of the sexual lifecycle, such as mating partner choice, polarized growth, cell-cell fusion, myosis, and sporulation. The main advantage of this technique is that it provides single cell visualization and so overcomes the problem that cells do not enter sexual differentiation synchronously.This method is very simple, but the visual demonstration is useful to show how to mount several strains in parallel for microscopy. Demonstrating the procedure with my PhD student Omaya Dudin, will be Laura Merlini, a postdoc in my lab. There are several variations to this protocol which can be tailored to study various stages of the sexual lifecycle, using either homothallic or heterothallic strains.In this demonstration, homothallic H90 strains will be used. In these strains, mating type switching takes place during the last mitotic division after nitrogen deprivation, resulting in a mix of the two mating types. In the evening, two days prior to the mating experiment, inoculate freshly streaked strains from solid media into culture tubes containing 3 milliliters of minimum sporulation medium with nitrogen or MSL plus N.Incubate overnight with shaking at 25 degrees Celsius.On the following morning, if necessary, dilute the cell suspensions in MSL plus N to ensure exponential growth throughout the day. In the evening, measure the optical density and dilute the cells in 20 milliliters of MSL plus N media in 100 milliliter flasks to an optical density of 025 Wild-type cell cultures should reach an optical density 600 of about 8 the following morning. So the dilution should be adjusted accordingly, if working with strains with longer generation times.Incubate the cultures overnight at 30 degrees Celsius with shaking. On the following morning, measure the optical density to verify that each culture has an optical density 600 around 8. Pellet the cells at 1000 x g for one minute and transfer it to a 1.5 milliliter tube.Wash the cells three times in 1 milliliter of minimum sporulation medium without nitrogen or MSL minus N.After the last wash, resuspend the cells in 3 milliliters of MSL minus N medium. Measure the optical density and dilute the cells to an optical density 600 of 1.5. To begin the preparation of agarose pads, first melt an Aliquat of MSL minus N agarose 2 percent in a 95 degree Celsius heat block for 10 to 15 minutes.In the meantime, pellet 100 microliters of the cell suspension prepared earlier at 1000 x g for one minute. Remove the supernatant and resuspend cells in the residual 2 to 4 microliters of medium. With the cells waiting on the bench, add 200 microliters of the melted medium on a glass slide between two spacers.Gently place another slide on top of the melted agar. Once the agarose has solidified, carefully remove the spacers. To remove the top glass slide, gently rotate and pull it sideways.If several strains are to be imaged simultaneously, the pad can be subdivided into four mini pads. For this, use a razor blade and split the pad in its middle pulling the parts about 1 millimeter aside and repeat in the perpendicular direction. Add 1 microliter of cells to the agarose pad and wait for about one minute.Cover the cells with a cover slip and seal the entire periphery of the cover slip with heated VELAP. It is important to seal the entire cover slip to prevent desiccation of the pad. Let the pad sit for at least 30 minutes before imaging.To ensure success of the protocol, and high mating efficiency, cells are to be kept in exponential growth until nitrogen starvation and mounted without excess liquid so they are stationary on the agarose pad. Live cell imaging of the mating yeast cells is then performed at 25 degrees Celsius, or room temperature, following the procedure described in the protocol text. Time-lapse imaging allows a visualization of cells undergoing shmooing, fusion, and sporulation in the 24 hours that follow nitrogen starvation.This process is illustrated in this representative movie by the two cells magnified in the bottom-left inset. This protocol can also be used to monitor the dynamics of fluorescently tagged proteins in mating cells. Here, a heterothallic H-strain expressing myo52 tagged with 3GFP was mated with a heterothallic H+strain expressing myo52 fused to the red fluorescent tdTomato protein, as well as cytosolic GFP.The cytosolic GFP allows monitoring of the timing of fusion, visualized by its entry into the H-cell. These time-lapse images show that myo52 initially formed to dynamic zones throughout the cell cortex. Myo52 signal was then stabilized in a single focus just before the fusion event.After watching this video, you should have a good understanding of how to prepare cells for efficient mating and live cell investigation of the mating process of fission yeast.

microscopy-of-fission-yeast-sexual-lifecycle

Research

Education

JoVE Journal

JoVE Core

Biology

Human Biology

Reproduction and Development

SCIENTISTS IN ACTION

Purification of Mitochondria from Yeast Cells

Mitochondria are the main site of ATP production during aerobic metabolism in eukaryotic non-photosynthetic cells1. These complex organelles also play essential roles in apoptotic cell death2, cell survival3, mammalian development4, neuronal development and function4, intracellular signalling5, and longevity regulation6. Our understanding of these complex biological processes controlled by mitochondria relies on robust methods for assessing their morphology, their protein and lipid composition, the integrity of their DNA, and their numerous vital functions. The budding yeast Saccharomyces cerevisiae, a genetically and biochemically manipulable unicellular eukaryote with annotated genome and well-defined proteome, is a valuable model for studying the molecular and cellular mechanisms underlying essential biological functions of mitochondria. For these types of studies, it is crucial to have highly pure mitochondria. Here we present a detailed description of a rapid and effective method for purification of yeast mitochondria. This method enables the isolation of highly pure mitochondria that are essentially free of contamination by other organelles and retain their structural and functional integrity after their purification. Mitochondria purified by this method are suitable for cell-free reconstitution of essential mitochondrial processes and can be used for the analysis of mitochondrial structure and functions, mitochondrial proteome and lipidome, and mitochondrial DNA.

We describe a rapid and effective method for purification of mitochondria from the yeast Saccharomyces cerevisiae. This method enables the high-yield isolation of pure mitochondria that are essentially free of contamination by other organelles and retain their structural and functional integrity after their purification.

Purificação de mitocôndrias de células de levedura

Mitochondria are the main site of ATP production during aerobic metabolism in eukaryotic non-photosynthetic cells1. These complex organelles also play ...

Biologia

Yeast Colony Embedding Method

Patterning of different cell types in embryos is a key mechanism in metazoan development. Communities of microorganisms, such as colonies and biofilms also display patterns of cell types. For example, in the yeast S. cerevisiae, sporulated cells and pseudohyphal cells are not uniformly distributed in colonies. The functional importance of patterning and the molecular mechanisms that underlie these patterns are still poorly understood.
One challenge with respect to investigating patterns of cell types in fungal colonies is that unlike metazoan tissue, cells in colonies are relatively weakly attached to one another. In particular, fungal colonies do not contain the same extensive level of extracellular matrix found in most tissues . Here we report on a method for embedding and sectioning yeast colonies that reveals the interior patterns of cell types in these colonies. The method can be used to prepare thick sections (0.5 &mu;) useful for light microscopy and thin sections (0.1 &mu;) suitable for transmission electron microscopy. Asci and pseudohyphal cells can easily be distinguished from ovoid yeast cells by light microscopy , while the interior structure of these cells can be visualized by EM.
The method is based on surrounding colonies with agar, infiltrating them with Spurr's medium, and then sectioning. Colonies with a diameter in the range of 1-2 mm are suitable for this protocol. In addition to visualizing the interior of colonies, the method allows visualization of the region of the colony that invades the underlying agar.

A method for embedding yeast colonies allowing sectioning for light and electron microscopy. This protocol allows determination of the distribution of sporulated cells and pseudohyphal cells within colonies providing a new tool toward understanding the organization of cell types within a fungal community.

Levedura Método Embedding Colony

Patterning of  different cell types in embryos is a key mechanism in metazoan development. Communities of microorganisms, such as colonies and biofilms ...

A Fluorescence Microscopy Assay for Monitoring Mitophagy in the Yeast Saccharomyces cerevisiae

Autophagy is important for turnover of cellular components under a range of different conditions. It serves an essential homeostatic function as well as a quality control mechanism that can target and selectively degrade cellular material including organelles1-4. For example, damaged or redundant mitochondria (Fig. 1), not disposed of by autophagy, can represent a threat to cellular homeostasis and cell survival. In the yeast, Saccharomyces cerevisiae, nutrient deprivation (e.g., nitrogen starvation) or damage can promote selective turnover of mitochondria by autophagy in a process termed mitophagy 5-9.
We describe a simple fluorescence microscopy approach to assess autophagy. For clarity we restrict our description here to show how the approach can be used to monitor mitophagy in yeast cells. The assay makes use of a fluorescent reporter, Rosella, which is a dual-emission biosensor comprising a relatively pH-stable red fluorescent protein linked to a pH-sensitive green fluorescent protein. The operation of this reporter relies on differences in pH between the vacuole (pH ~ 5.0-5.5) and mitochondria (pH ~ 8.2) in living cells. Under growing conditions, wild type cells exhibit both red and green fluorescence distributed in a manner characteristic of the mitochondria. Fluorescence emission is not associated with the vacuole. When subjected to nitrogen starvation, a condition which induces mitophagy, in addition to red and green fluorescence labeling the mitochondria, cells exhibit the accumulation of red, but not green fluorescence, in the acidic vacuolar lumen representing the delivery of mitochondria to the vacuole. Scoring cells with red, but not green fluorescent vacuoles can be used as a measure of mitophagic activity in cells5,10-12.

A Fluorescence Microscopy Assay for Monitoring Mitophagy in the Yeast Saccharomyces cerevisiae

A robust approach to monitor the delivery of organelles to the acidic lumen of the yeast vacuole for degradation and recycling is described. The method relies on the specific labeling of target organelles with a genetically encoded dual-emission fluorescence pH-biosensor, and visualization of individual cells using fluorescence microscopy.

Um Ensaio de microscopia de fluorescência para Mitophagy Monitoramento no fermento Saccharomyces cerevisiae

Autophagy is important for turnover of cellular components under a range of different conditions. It serves an essential homeostatic function as well as a ...

High-throughput Yeast Plasmid Overexpression Screen

The budding yeast, Saccharomyces cerevisiae, is a powerful model system for defining fundamental mechanisms of many important cellular processes, including those with direct relevance to human disease. Because of its short generation time and well-characterized genome, a major experimental advantage of the yeast model system is the ability to perform genetic screens to identify genes and pathways that are involved in a given process. Over the last thirty years such genetic screens have been used to elucidate the cell cycle, secretory pathway, and many more highly conserved aspects of eukaryotic cell biology 1-5. In the last few years, several genomewide libraries of yeast strains and plasmids have been generated 6-10. These collections now allow for the systematic interrogation of gene function using gain- and loss-of-function approaches 11-16. Here we provide a detailed protocol for the use of a high-throughput yeast transformation protocol with a liquid handling robot to perform a plasmid overexpression screen, using an arrayed library of 5,500 yeast plasmids. We have been using these screens to identify genetic modifiers of toxicity associated with the accumulation of aggregation-prone human neurodegenerative disease proteins. The methods presented here are readily adaptable to the study of other cellular phenotypes of interest.

Here we describe a plasmid overexpression screen in Saccharomyces cerevisiae, using an arrayed plasmid library and a high-throughput yeast transformation protocol with a liquid handling robot.

Alto rendimento Yeast Tela superexpressão Plasmid

The budding yeast, Saccharomyces cerevisiae, is a powerful model system for defining fundamental mechanisms of many important cellular processes, ...

Competitive Genomic Screens of Barcoded Yeast Libraries

By virtue of advances in next generation sequencing technologies, we have access to new genome sequences almost daily. The tempo of these advances is accelerating, promising greater depth and breadth. In light of these extraordinary advances, the need for fast, parallel methods to define gene function becomes ever more important. Collections of genome-wide deletion mutants in yeasts and E. coli have served as workhorses for functional characterization of gene function, but this approach is not scalable, current gene-deletion approaches require each of the thousands of genes that comprise a genome to be deleted and verified. Only after this work is complete can we pursue high-throughput phenotyping. Over the past decade, our laboratory has refined a portfolio of competitive, miniaturized, high-throughput genome-wide assays that can be performed in parallel. This parallelization is possible because of the inclusion of DNA 'tags', or 'barcodes,' into each mutant, with the barcode serving as a proxy for the mutation and one can measure the barcode abundance to assess mutant fitness. In this study, we seek to fill the gap between DNA sequence and barcoded mutant collections. To accomplish this we introduce a combined transposon disruption-barcoding approach that opens up parallel barcode assays to newly sequenced, but poorly characterized microbes. To illustrate this approach we present a new Candida albicans barcoded disruption collection and describe how both microarray-based and next generation sequencing-based platforms can be used to collect 10,000 - 1,000,000 gene-gene and drug-gene interactions in a single experiment.

We have developed comprehensive, unbiased genome-wide screens to understand gene-drug and gene-environment interactions. Methods for screening these mutant collections are presented.

Competitiva Screens Genomic de Bibliotecas Yeast Barcoded

By virtue of advances in next generation sequencing technologies, we have access to new genome sequences almost daily.  The tempo of these advances is ...

Quantitative Live Cell Fluorescence-microscopy Analysis of Fission Yeast

Several microscopy techniques are available today that can detect a specific protein within the cell. During the last decade live cell imaging using fluorochromes like Green Fluorescent Protein (GFP) directly attached to the protein of interest has become increasingly popular 1. Using GFP and similar fluorochromes the subcellular localisations and movements of proteins can be detected in a fluorescent microscope. Moreover, also the subnuclear localisation of a certain region of a chromosome can be studied using this technique. GFP is fused to the Lac Repressor protein (LacR) and ectopically expressed in the cell where tandem repeats of the lacO sequence has been inserted into the region of interest on the chromosome2. The LacR-GFP will bind to the lacO repeats and that area of the genome will be visible as a green dot in the fluorescence microscope. Yeast is especially suited for this type of manipulation since homologous recombination is very efficient and thereby enables targeted integration of the lacO repeats and engineered fusion proteins with GFP 3. Here we describe a quantitative method for live cell analysis of fission yeast. Additional protocols for live cell analysis of fission yeast can be found, for example on how to make a movie of the meiotic chromosomal behaviour 4. In this particular experiment we focus on subnuclear organisation and how it is affected during gene induction. We have labelled a gene cluster, named Chr1, by the introduction of lacO binding sites in the vicinity of the genes. The gene cluster is enriched for genes that are induced early during nitrogen starvation of fission yeast 5. In the strain the nuclear membrane (NM) is labelled by the attachment of mCherry to the NM protein Cut11 giving rise to a red fluorescent signal. The Spindle Pole body (SPB) compound Sid4 is fused to Red Fluorescent Protein (Sid4-mRFP) 6. In vegetatively growing yeast cells the centromeres are always attached to the SPB that is embedded in the NM 7. The SPB is identified as a large round structure in the NM. By imaging before and 20 minutes after depletion of the nitrogen source we can determine the distance between the gene cluster (GFP) and the NM/SPB. The mean or median distances before and after nitrogen depletion are compared and we can thus quantify whether or not there is a shift in subcellular localisation of the gene cluster after nitrogen depletion.

The fission yeast, Schizosaccharomyces pombe, is a good model system to study basic cellular processes. Here we describe a method to perform quantitative live cell analysis of fission yeast. In this particular experiment we focus on organisation of the genome within the cell nucleus, but the method can also be used to study cytosolic factors.

Quantitativas de células vivas de Análise de microscopia de fluorescência de levedura

Several microscopy techniques are available today that can detect a specific protein within the cell. During the last decade live cell imaging using ...

Sexual Development and Ascospore Discharge in Fusarium graminearum

Fusarium graminearum has become a model system for studies in development and pathogenicity of filamentous fungi. F. graminearum most easily produces fruiting bodies, called perithecia, on carrot agar. Perithecia contain numerous tissue types, produced at specific stages of perithecium development. These include (in order of appearance) formation of the perithecium initials (which give rise to the ascogenous hyphae), the outer wall, paraphyses (sterile mycelia which occupy the center of the perithecium until the asci develop), the asci, and the ascospores within the asci14. The development of each of these tissues is separated by approximately 24 hours and has been the basis of transcriptomic studies during sexual development12,8. Refer to Hallen et al. (2007) for a more thorough description of development, including photographs of each stage. Here, we present the methods for generating and harvesting synchronously developing lawns of perithecia for temporal studies of gene regulation, development, and physiological processes. Although these methods are written specifically to be used with F. graminearum, the techniques can be used for a variety of other fungi, provided that fruiting can be induced in culture and there is some synchrony to development. We have recently adapted this protocol to study the sexual development of F. verticillioides. Although individual perithecia must be hand picked in this species, because a lawn of developing perithecia could not be induced, the process worked well for studying development (Sikhakolli and Trail, unpublished).
The most important function of fungal fruiting bodies is the dispersal of spores. In many of the species of Ascomycota (ascus producing fungi), spores are shot from the ascus, due to the generation of turgor pressure within the ascus, driving ejection of spores (and epiplasmic fluid) through the pore in the ascus tip2,7. Our studies of forcible ascospore discharge have resulted in development of a "spore discharge assay", which we use to screen for mutations in the process. Here we present the details of this assay.
F. graminearum is homothallic, and thus can form fruiting bodies in the absence of a compatible partner. The advantage of homothallism is that crossing is not necessary to generate offspring homozygous for a particular trait, a facet that has facilitated the study of sexual development in this species14,7. However, heterothallic strains have been generated that can be used for crossing5,9. It is also possible to cross homothallic strains to obtain mutants for several genes in one strain1. This is done by coinoculating one Petri dish with 2 strains. Along the meeting point, the majority of perithecia will be recombinant (provided a mutation in one of the parent strains does not inhibit outcrossing). As perithecia age, they exude ascospores en masse instead of forcibly discharging them. The resulting spore exudate (called a cirrhus) sits at the tip of the perithecium and can easily be removed for recovery of individual spores. Here we present a protocol to facilitate the identification of recombinant perithecia and the recovery of recombinant progeny.

Sexual Development and Ascospore Discharge in Fusarium graminearum

Sexual crosses and isolation of recombinant progeny are important research tools for the filamentous fungus, Fusarium graminearum, The techniques necessary successfully carry out these processes are presented.

Desenvolvimento Sexual e descarga de ascósporos em Fusarium graminearum</em

Fusarium graminearum has become a model system for studies in development and pathogenicity of filamentous fungi. F. graminearum most easily produces ...

Spatiotemporal Analysis of Cytokinetic Events in Fission Yeast

Cytokinesis, the final step in cell division is critical for maintaining genome integrity. Proper cytokinesis is important for cell differentiation and development. Cytokinesis involves a series of events that are well coordinated in time and space. Cytokinesis involves the formation of an actomyosin ring at the division site, followed by ring constriction, membrane furrow formation and extra cellular matrix remodeling. The fission yeast, Schizosaccharomyces pombe (S.&#160;pombe)&#160;is a well-studied model system that has revealed with substantial clarity the initial events in cytokinesis. However, we do not understand clearly how different cytokinetic events are coordinated spatiotemporally. To determine this, one needs to analyze the different cytokinetic events in great details in both time and in space. Here we describe a microscopy approach to examine different cytokinetic events in live cells. With this approach it is possible to time different cytokinetic events and determine the time of recruitment of different proteins during cytokinesis. In addition, we describe protocols to compare protein localization, and distribution at the site of cell division. This is a basic protocol to study cytokinesis in fission yeast and can also be used for other yeasts and fungal systems.

The fission yeast, Schizosaccharomyces pombe&#160;is an excellent model system to study cytokinesis, the final stage in cell division. Here we describe a microscopy approach to analyze different cytokinetic events in live fission yeast cells.

Análise espacial e temporal da Cytokinetic Eventos na levedura de fissão

Cytokinesis, the final step in cell division is critical for maintaining genome integrity. Proper cytokinesis is important for cell differentiation and ...

4D Microscopy of Yeast

The goal of this protocol is to characterize how membrane compartments form and transform in live cells of budding yeast. Many intracellular compartments in yeast are dynamic, and a full understanding of their properties requires time-lapse imaging. Multi-color 4D confocal fluorescence microscopy is a powerful method for tracking the behavior and composition of an intracellular compartment on a time scale of 5-15 min. Rigorous analysis of compartment dynamics requires the capture of thousands of optical sections. To achieve this aim, photobleaching and phototoxicity are minimized by scanning rapidly at very low laser power, and the pixel dimensions and Z-step intervals are set to the largest values that are compatible with sampling the image at full resolution. The resulting 4D data sets are noisy but can be smoothed by deconvolution. Even with high quality data, the analysis phase is challenging because intracellular structures are often numerous, heterogeneous, and mobile. To meet this need, custom ImageJ plugins were written to array 4D data on a computer screen, identify structures of interest, edit the data to isolate individual structures, quantify the fluorescence time courses, and make movies of the projected Z-stacks. 4D movies are particularly useful for distinguishing stable compartments from transient compartments that turn over by maturation. Such movies can also be used to characterize events such as compartment fusion, and to test the effects of specific mutations or other perturbations.

This protocol describes the analysis of fluorescently labeled intracellular compartments in budding yeast using multi-color 4D (time-lapse 3D) confocal microscopy. The imaging parameters are chosen to capture adequate signals while limiting photodamage. Custom ImageJ plugins allow labeled structures to be tracked and quantitatively analyzed.

4D microscopia de levedura

The goal of this protocol is to characterize how membrane compartments form and transform in live cells of budding yeast. Many intracellular compartments ...

Biological Sample Preparation by High-pressure Freezing, Microwave-assisted Contrast Enhancement, and Minimal Resin Embedding for Volume Imaging

The described sample preparation technique is designed to combine the best quality of ultrastructural preservation with the most suitable contrast for the imaging modality in a focused ion beam scanning electron microscope (FIB-SEM), which is used to obtain stacks of sequential images for 3D reconstruction and modelling. High-pressure freezing (HPF) allows close to native structural preservation, but the subsequent freeze substitution often does not provide sufficient contrast, especially for a bigger specimen, which is needed for high-quality imaging in the SEM required for 3D reconstruction. Therefore, in this protocol, after the freeze substitution, additional contrasting steps are carried out at room temperature. Although these steps are performed in a microwave, it is also possible to follow traditional bench processing, which requires longer incubation times.The subsequent embedding in minimal amounts of resin allows for faster and more precise targeting and preparation inside the FIB-SEM. This protocol is especially useful for samples that require preparation by high-pressure freezing for a reliable ultrastructural preservation but do not gain enough contrast during the freeze substitution for volume imaging using FIB-SEM. In combination with the minimal resin embedding, this protocol provides an efficient workflow for the acquisition of high-quality volume data.

Here we present a protocol for combining two sample processing techniques, high-pressure freezing and microwave-assisted sample processing, followed by minimal resin embedding for acquiring data with a focused ion beam scanning electron microscope (FIB-SEM). This is demonstrated using a mouse tibial nerve sample and Caenorhabditis elegans.

Preparação de amostras biológicas por congelamento de alta pressão, realce de contraste assistida por microondas e resina mínima incorporação para a imagem latente de Volume

The described sample preparation technique is designed to combine the best quality of ultrastructural preservation with the most suitable contrast for the ...