Name: kinematic history of a salient-recess junction explored through a combined approach of field data and analog sandbox modeling
Uploaded: 2016-08-05T15:00:00
Description: Watch this Scientific Journal Video about Kinematic History of a Salient-recess Junction Explored through a Combined Approach of Field Data and Analog Sandbox Modeling at JoVE.com

We thank Erin Bradley and Liz Cole for their assistance in the field. Field work, thin-section preparation and material for the sandbox model was supported by Franklin &amp; Marshall College's Committee on Grants.

1. Verzameling van macroniveau veldgegevens <ol><li> Voor het uitvoeren van veldwerk, gebruiken luchtfoto&#39;s / topografische kaarten om de algemene trend van de bergen (gedefinieerd door de hedendaagse Ridge Crest), transversale zones, storingen en andere lineatie identificeren aan de macroschaal (figuur 2). <ol><li> Maken gebruik van soortgelijke grootschalige topografische kaarten en luchtfoto&#39;s, zodat patronen direct kunnen worden vergeleken. Gebruik 1: 24.000 schaal kaarten en foto&#39;s. <...

<ol>
	<li>Marshak, S., Wilkerson, M. S., Hsui, H. T., KR, M. c. C. l. a. y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Generation+of+curved+fold-thrust+belts:+Insights+from+simple+physical+and+analytical.">Generation of curved fold-thrust belts: Insights from simple physical and analytical.</a> modelsThrust Tectonics. , 83-92 (1992).</li><li>Mitra, G., S, S. e. n. g. u. p. t. a. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evolution+of+salients+in+a+fold-and-thrust+belt:+the+effects+of+sedimentary+basin+geometry,+strain+distribution+and+critical+taper.">Evolution of salients in a fold-and-thrust belt: the effects of sedimentary basin geometry, strain distribution and critical taper.</a> Evolution of Geological Structures in Micro- to Macro-scales. , 59-90 (1997).</li><li>Weil, A., Sussman, A., A, S. u. s. s. m. a. n., A, W. e. i. l. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Classifying+curved+orogens+based+on+timing+relationships+between+structural+development+and+vertical+axis+rotations.">Classifying curved orogens based on timing relationships between structural development and vertical axis rotations.</a> Orogenic curvature Geol. Soc. of Am. Special Paper. 383, 205-223 (2004).</li><li>Ismat, Z., Mitra, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Folding+by+cataclastic+flow+at+shallow+crustal+levels+in+the+Canyon+Range,+Sevier+orogenic+belt,+west-Central+Utah.">Folding by cataclastic flow at shallow crustal levels in the Canyon Range, Sevier orogenic belt, west-Central Utah.</a> J. of Struct. Geol. 23 (2-3), 355-378 (2001).</li><li>Tull, J., Holm, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Structural+evolution+of+a+major+Appalachian+salient-recess+junction:+Consequences+of+oblique+collisional+convergence+across+a+continental+margin+transform+fault.">Structural evolution of a major Appalachian salient-recess junction: Consequences of oblique collisional convergence across a continental margin transform fault.</a> Geol. Soc. of Am. Bull. 117 (3), 482-499 (2005).</li><li>Ismat, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Block+supported+cataclastic+flow+within+the+upper+crust.">Block supported cataclastic flow within the upper crust.</a> J. of Struct. Geol. 56, 118-128 (2013).</li><li>Ismat, Z., Toeneboehn, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Deformation+along+a+salient-transverse+zone+junction:+An+example+from+the+Leamington+transverse+zone,Utah,+Sevier+fold-thrust+belt+(USA).">Deformation along a salient-transverse zone junction: An example from the Leamington transverse zone,Utah, Sevier fold-thrust belt (USA).</a> J. of Struct. Geol. 75, 60-79 (2015).</li><li>Reed, F. S., Mergner, J. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Preparation+of+Rock+Thin+Sections.">Preparation of Rock Thin Sections.</a> Amer. Mineral. 38, 1184-1203 (1953).</li><li>Underwood, E. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Quantitative Stereology. , (1970).</li><li>Fry, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Random+point+distribution+and+strain+measurement+in+rock.">Random point distribution and strain measurement in rock.</a> Tectonophys. 60 (1), 89-105 (1979).</li><li>McNaught, M. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Estimating+uncertainty+in+normalized+Fry+plots+using+a+bootstrap+approach.">Estimating uncertainty in normalized Fry plots using a bootstrap approach.</a> J. of Struct. Geol. 24 (2), 311-322 (2002).</li><li>De Paor, D. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+Interactive+Program+for+Doing+Fry+Strain+Analysis+on+the+Macintosh+Microcomputer.">An Interactive Program for Doing Fry Strain Analysis on the Macintosh Microcomputer.</a> J. of Geol. Ed. 37 (3), 171-180 (1989).</li><li>Ismat, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Folding+kinematics+expressed+in+fracture+patterns:+An+example+from+the+Anti-Atlas+fold-belt,+Morocco.">Folding kinematics expressed in fracture patterns: An example from the Anti-Atlas fold-belt, Morocco.</a> J. of Struct. Geol. 30 (11), 1396-1404 (2008).</li><li>Reches, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Faulting+of+rocks+in+three-dimensional+strain+fields:+II.+Theoretical+analysis.">Faulting of rocks in three-dimensional strain fields: II. Theoretical analysis.</a> Tectonophys. 95 (1-2), 133-156 (1983).</li><li>Reches, Z., Dieterich, J. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Faulting+of+rocks+in+three+dimensional+strain+fields:+1.+Failure+of+rocks+in+polyaxial,+servo-control+experiments.">Faulting of rocks in three dimensional strain fields: 1. Failure of rocks in polyaxial, servo-control experiments.</a> Tectonophys. 95 (1-2), 111-132 (1983).</li><li>Ismat, Z. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Evolution+of+fracture+porosity+and+permeability+during+folding+by+cataclastic+flow:+Implications+for+syntectonic+fluid+flow.">Evolution of fracture porosity and permeability during folding by cataclastic flow: Implications for syntectonic fluid flow.</a> Rocky Mount. Geol. 47 (2), 133-155 (2012).</li><li>Kwon, S., Mitra, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Three-dimensional+kinematic+history+at+an+oblique+ramp,+Leamington+zone,+Sevier+belt,+Utah.">Three-dimensional kinematic history at an oblique ramp, Leamington zone, Sevier belt, Utah.</a> J. of Struct. Geol. 28 (3), 474-493 (2006).</li><li>Casas, A. M., Simon, J. L., Seron, F. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stress+deflection+in+a+tectonic+compressional+field:+A+model+for+the+northeastern+Iberian+chain,+Spain.">Stress deflection in a tectonic compressional field: A model for the northeastern Iberian chain, Spain.</a> J. of Geophys. Res. 97, 7183-7192 (1992).</li><li>Apotria, T. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Thrust+sheet+rotation+and+out-of-plane+strains+associated+with+oblique+ramps:+An+example.">Thrust sheet rotation and out-of-plane strains associated with oblique ramps: An example.</a> J. of Struct. Geol. 17 (5), 647-662 (1995).</li><li>Hubbert, M. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Theory+of+Scale+Models+as+Applied+to+the+Study+of+Geological+Structures.">Theory of Scale Models as Applied to the Study of Geological Structures.</a> Geol. Soc. of Am. Bull. 48 (10), 1459-1520 (1937).</li><li>Sch&#246;pfen, M. P. J., Steyrer, H. P., Koyi, H. A., Mancktelow, N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Experimental+modeling+of+strike-slip+faults+and+the+self-similar+behavior.">Experimental modeling of strike-slip faults and the self-similar behavior.</a> Tectonic Modeling: A volume in honor of Hans Ramberg Geol. Soc. of Am. Mem. 193, 21-27 (2001).</li><li>Kwon, S., Mitra, G., Sussman, A., Weil, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Strain+distribution,+strain+history+and+kinematic+evolution+associated+with+the+formation+of+arcuate+salients+in+fold-thrust+belts:+the+example+of+the+Provo+salient,+Sevier+orogeny,+Utah.">Strain distribution, strain history and kinematic evolution associated with the formation of arcuate salients in fold-thrust belts: the example of the Provo salient, Sevier orogeny, Utah.</a> Orogenic curvature Geol. Soc. of Am. Special Paper. 383, 205-223 (2004).</li><li>Elliott, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+motion+of+thrust+sheets.">The motion of thrust sheets.</a> J. of Geophys. Res. 81, 949-963 (1976).</li></ol>

De Centrale Utah segment van de Sevier vouw-breuk gordel, en de noordelijke grens, de Leamington dwarse zone fungeert als een ideale natuurlijk laboratorium voor het bestuderen van saillante-uitsparing knooppunten (figuur 1). Langs deze kruising, het vervoer richting constant blijft en de stuwkracht lakens zijn ononderbroken over de kruising, dus de enige variabele is de onderliggende kelder geometrie 5. Hier presenteren we een methode om dergelijke opvallende uit...

-Voudige stuwkracht banden bestaan ​​uit salients (of segmenten), waarbij de stuwkracht platen in aangrenzende salients ontkoppeld door uitsparingen of dwarszones 1,2,3. De overgang van saillante tot reces kan aanzienlijk complex zijn, waarbij een veelzijdige suite van structuren, en kunnen kritische aanwijzingen houden op te vouwen stuwkracht ontwikkeling riem. In deze paper, we zorgvuldig onderzoeken een saillante-uitsparing kruising, met een combinatie van multischaal veldgegevens en een zandbak model, om beter te begrijpen hoe de vervorming kan worden ondergebracht binnen de plooi stuwkracht riemen. Het verbindingspunt van de Centrale Utah segment en de transversale Leamington zone een ideale natuurlijk laboratorium voor het bestuderen saillante-uitsparing verbindingen om verschillende redenen (figuur 1). Ten eerste, de rotsen blootgesteld binnen het segment blijven, ononderbroken, in de dwarse zone 4. Dus, kan vervorming patronen continu worden gevolgd en vergeleken over de kruising. S<html> econd, de rotsen zijn in wezen monomineralic, dus variatie in de fout patronen zijn niet het gevolg van heterogeniteit binnen de eenheden, maar in plaats daarvan overeenkomen met de algehele vouwen en stak in het studiegebied 4. Ten derde, elastico wrijvingsarme mechanismen, zoals cataclastic stroom, bijgestaan ​​vervorming hele gebied, zodat directe vergelijkingen van mesoschaal storingsbeelden 4. Tenslotte de totale transportrichting bleef continu over de lengte van het segment en dwarsrichting zone; derhalve variaties in verkorten richting geen invloed op de vervorming behouden patronen 4. Al deze factoren beperken het aantal variabelen die de vervorming langs het segment en transversale zone kan hebben beïnvloed. Daardoor veronderstellen we dat de geconserveerde structuren voornamelijk gevormd door een wijziging in de onderliggende kelder 5 geometrie. Pbelasting / 54318 / 54318fig1.jpg &quot;/&gt; Figuur 1. Voorbeeld van een index kaart. De Sevier fold-breuk gordel van westen van de VS, waaruit blijkt grote salients, segmenten, uitsparingen en transversale zones. Figuur 2 aangegeven door boxed gebied (gewijzigd ten opzichte van Ismat en Toeneboehn 7). <a href="https://www.jove.com/files/ftp_upload/54318/54318fig1large.jpg" target="_blank">Klik hier om te bekijken grotere versie van dit cijfer.</a> Vouwen en stak in de centrale Utah segment en Leamington dwarse zone, vond plaats op een diepte van &lt;15 km, dat wil zeggen binnen de elastico-wrijvende regime, waar de vervorming plaatsvond in de eerste plaats door ontsluiting-schaal (&lt;1 m) fouten en cataclastic vloeien 4,6 . Omdat transport en vouwen van de stuwkracht plaat vond plaats in de eerste plaats door elastico-wrijvende mechanismen, voorspellen we dat een gedetailleerde foutanalyse verder inzicht kunnen geven in de kinematische geschiedenis van de Leamington dwarse zone en th<html> e onderliggende kelder geometrie. Om deze hypothese te testen, hebben we verzameld en geanalyseerd storingsbeelden bewaard in de rotsen in het noordelijke deel van de centrale Utah segment en in de dwarsrichting Leamington zone (figuur 2). <img alt="figuur 3" src="/files/ftp_upload/54318/54318fig2.jpg" /> Figuur 2. Voorbeeld van macroschaal topografische kaart. Shaded-relief topografische kaart van boxed gebied in figuur 1. De 4 regio&#39;s worden gescheiden door stevige witte lijnen. Bedding contacten tussen de Proterozoic Caddy Canyon kwartsiet (PCC), Proterozoic Mutual kwartsiet (PCM) en Cambrium Tintic kwartsiet (Ct) getoond. Gestippelde lijnen geven de trend van de bergen in dit gebied. Site locaties worden weergegeven met genummerde zwarte vierkantjes. Eerste-orde lineatie worden getoond met stevige grijze lijnen (gewijzigd ten opzichte van Ismat en Toeneboehn 7).ftp_upload / 54318 / 54318fig2large.jpg &quot;target =&quot; _ blank &quot;&gt; Klik hier om een ​​grotere versie van deze figuur te bekijken. Sandbox experimenten werden uitgevoerd om mee te vergelijken, en aan te vullen, de fout data. A push-blok zandbak model, met frontale en schuine hellingen, werd gebruikt om onze analyse van de structuur bewaard in staan, en rond de dwarse Leamington zone (Figuur 3) 7. De doelstellingen van deze aanpak zijn vier-voudig: 1) bepalen of de mesoschaal storingsbeelden consistent zijn, 2) bepalen of de zandbak model ondersteunt en verklaart de veldgegevens, 3) te bepalen of de zandbak model geeft meer details over de structuren die niet zijn waargenomen in het veld, en 4) nagaan of deze gecombineerde gebied-experimentele methode nuttig en gemakkelijk te reconstrueren. <img alt="figuur 3" src="/files/ftp_upload/54318/54318fig3.jpg" /> Figuur 3. Voorbeeld van een push-block model. Foto van lege sandbox model. De zuidelijke frontale helling (SFR), schuine helling (OR), Noord-frontale helling (NFR), en de vier regio&#39;s (1-4) zijn gelabeld (gewijzigd ten opzichte van Ismat en Toeneboehn 7). <a href="https://www.jove.com/files/ftp_upload/54318/54318fig3large.jpg" target="_blank">Klik hier om een grotere versie te bekijken dit figuur.</a>

<table border="0" cellpadding="0" cellspacing="0" width="1362">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:227px;">fiberboard</td>
			<td style="width:140px;">Any</td>
			<td style="width:195px;">NA</td>
			<td style="width:800px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">finishing lacquer</td>
			<td>Any</td>
			<td>NA</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">epoxy</td>
			<td>Epoxy technology</td>
			<td>Parts A and B: 301-2 2LB</td>
			<td>best if warmed to 80&#186; - 125&#186;. If warming is not possible, it will cure fine, it will just take 1 week, rather than 1 day.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">ramp wood-pine</td>
			<td>Any</td>
			<td>NA</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">painters tape</td>
			<td>Any</td>
			<td>NA</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">rabbit joints</td>
			<td>Any</td>
			<td>NA</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">countersunk fasteners</td>
			<td>Any</td>
			<td>NA</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">sand paper</td>
			<td>Any</td>
			<td>NA</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">play sand</td>
			<td>Any</td>
			<td>NA</td>
			<td>best if homogenous grain size, ~0.5mm</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">food coloring</td>
			<td>Any</td>
			<td>NA</td>
			<td>best to use one color and a dark color</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">plastic mesh/grid</td>
			<td>Any</td>
			<td>NA</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">square cross oins</td>
			<td>Any</td>
			<td>NA</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">crank screw</td>
			<td>Any</td>
			<td>NA</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">crank handle</td>
			<td>Any</td>
			<td>NA</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">sheet metal</td>
			<td>Any</td>
			<td>NA</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">dividers bars</td>
			<td>Any</td>
			<td>NA</td>
			<td></td>
		</tr>
	</tbody>
</table>

kinematic history of a salient-recess junction explored through a combined approach of field data and analog sandbox modeling

Within fold-thrust belts, the junctions between salients and recesses may hold critical clues to the overall kinematic history. The deformation history within these junctions is best preserved in areas where thrust sheets extend from a salient through an adjacent recess. We examine one such junction within the Sevier fold-thrust belt (western United States) along the Leamington transverse zone, northern Utah. Deformation within this junction took place by faulting and cataclastic flow. Here, we describe a protocol that examines these fault patterns to better understand the kinematic history of the field area. Fault data is supplemented by analog sandbox experiments. This study suggests that, in detail, deformation within the overlying thrust sheet may not directly reflect the underlying basement structure. We demonstrate that this combined field-experimental approach is easy, accessible, and may provide more details to the deformation preserved in the crust than other more expensive methods, such as computer modeling. In addition, the sandbox model may help to explain why and how these details formed. This method can be applied throughout fold-thrust belts, where upper-crustal rocks are well preserved. In addition, it can be modified to study any part of the upper crust that has been deformed via elastico-frictional mechanisms. Finally, this combined approach may provide more details as to how fold-thrust belts maintain critical-taper and serve as potential targets for natural resource exploration.

Luchtfoto&#39;s werden gebruikt om het veld onderverdelen in vier regio&#39;s (1-4), gebaseerd op de ontwikkeling van de moderne bergrug kam (figuur 2). Multi-schaal schuld gegevens worden vergeleken tussen deze vier regio&#39;s. Ervan uitgaande dat deze trend veranderingen weerspiegelen de onderliggende kelder geometrie, wordt de schuine helling gepositioneerd binnen Regio 2 en 3, waar de bergen trend schuin op de Sevier fold-breuk gordel. Gedurende de vier regio&#39;s,...

Watch this Scientific Journal Video about Kinematic History of a Salient-recess Junction Explored through a Combined Approach of Field Data and Analog Sandbox Modeling at JoVE.com

Kinematic History of a Salient-recess Junction Explored through a Combined Approach of Field Data and Analog Sandbox Modeling

Kinematic histories of fold-thrust belts are typically based on careful examinations of high-grade metamorphic rocks within a salient. We provide a novel method of understanding fold-thrust belts by examining salient-recess junctions. We analyze the oft-ignored upper crustal rocks using a combined approach of detailed fault analysis with experimental sandbox modeling.

Kinematische Geschiedenis van een Salient-uitsparing Junction onderzocht door middel van een gecombineerde aanpak van veldgegevens en analoge Sandbox Modeling

Within fold-thrust belts, the junctions between salients and recesses may hold critical clues to the overall kinematic history. The deformation history ...

The overall goal of this experiment is to track the deformation of thrust sheets as they move over oblique ramps. This method can help answer key questions in the field, such as how thrust sheets evolve in complex settings. The main advantages of this technique are that it is simple, inexpensive, and can be compared directly to the field data.This video shows how to use a push-block sandbox to replicate micro-scale faults found in the field. Field identification of micro-scale faults is covered in the text protocol, as is the general construction of the sandbox. To load the sandbox, use standard play sand, which is relatively homogeneous, with an average grain size of 5 milimeters.Prepare the sand by dying half of it. First, fill a 5 gallon bucket a quarter full. Then mix in enough black food coloring to make the sand a uniform dark green, which is easily distinguishable from the sand's original color.Upon drying the sand, as described in the text protocol, load the box with alternating layers of colored and uncolored sand, and ensure that each layer's leveled after it is added. The thicknesses of the sand pack that provides the clearest and most reproducible results should be arrived at empirically. This example shows a 3.5 centimeter sand pack with alternating colors every 6 centimeters.Next, gently press a plastic mesh composed of half inch of half inch squares onto the sand to produce a grid indentation. Then, insert square cross pins two inches apart throughout the sand. Next, mount a camera to view the entire sandbox.Now, push the sand with the crank-driven push-block to recreate shortening seen in the field. Move the push-block slowly enough that changes in the sand can be carefully documented. The speed should not affect the results.While pushing the sand, track the deformation by observing the shape changes of the squares, and track the amount of transport and vertical rotation by observing the motion of the pins. Repeat this process until the formed structures resemble those preserved in nature. Once the sandbox results mimic those preserved in nature, collect sample data.First, remove all cross pins from the sand. Then, to make samples, separate in epoxy portions of the deformed sand. This requires pre-cut sheet metal dividers.The bottom edge of the dividers must be made to match the angle of the ramp where the sample is to be taken and must fully extend the length of the ramp. The divider must also be taller than the sand pack. Before using a divider, cover it with painter's tape for easy cleanup.One end of the divider must be closer to control the flow of the epoxy, and the other end of the divider must be open to minimized disturbances to the sand pack. Next, fasten the divider using 1/4 inch by four inch screws, sheets with 3/8 inch diameter aluminum tubing. In this case, two dividers are used.One is placed on the oblique ramp, the other covers the frontal oblique ramp junction. Now, pour warm epoxy over the sand within the divider until no more epoxy can be absorbed, so the sand is fully saturated and will not come apart. After several days of drying, slide the dividers out of the sandbox, then lift the epoxied samples out from the surrounding sand.Using a rock saw, cut the samples perpendicularly and parallel to the strike of the ramps. Then, using permanent marker, highlight the bedding, folds, and faults within the exposed slices. A field study found four adjacent regions, each with mesoscale faults.The faults preserve a deformation fabric, which was penetrative and homogeneous at the mesoscale. The fault patterns were also unique within each region, which supported the macroscale assumption that an oblique ramp underlies regions two and three, and suggested that the conjugate-conjugate fault analysis was reliable. Using a sandbox model, a break was formed that was comparable to the position and orientation of the boundary between regions two and three on the macroscale maps.This supported the notion that the break in the overlying thrust sheet may have formed via a complex interaction of an eastward-moving thrust sheet over an oblique ramp. Analysis of epoxied sandbox samples was also supportive. Samples taken from the frontal ramp region accommodated transport to the east, while samples from the oblique ramp region accommodated transport to the southeast.After watching this video, you should have a good understanding of how to build, run, and modify sandbox models to replicate a specific field area. Once mastered, this technique can be done in one week if performed properly. After its development, this technique paved the way for researchers in the field of structural geology to explore the usefulness of fault data and how these data can be further interpreted with the aid of models.Thanks for watching and good luck with your models.

Research

JoVE Journal

Environment

Surface Renewal: An Advanced Micrometeorological Method for Measuring and Processing Field-Scale Energy Flux Density Data

Advanced micrometeorological methods have become  increasingly important in soil, crop, and environmental sciences.  For many scientists without formal ...

Calibrated Passive Sampling - Multi-plot Field Measurements of NH3 Emissions with a Combination of Dynamic Tube Method and Passive Samplers

Calibrated Passive Sampling - Multi-plot Field Measurements of NH3 Emissions with a Combination of Dynamic Tube Method and Passive Samplers

Geijkte Passive Sampling - Multi-plot Field Metingen van NH<sub&gt; 3</sub&gt; Emissies met een combinatie van Dynamic Tube Methode en passieve samplers

Agricultural ammonia (NH3) emissions (90% of total EU emissions) are responsible for about 45% airborne eutrophication, 31% soil acidification and 12% ...

Extracting Metrics for Three-dimensional Root Systems: Volume and Surface Analysis from In-soil X-ray Computed Tomography Data

Het halen van Metrics voor Driedimensionale Root Systems: Volume en Surface Analysis van In-bodem X-ray Computed Tomography Gegevens

Plant roots play a critical role in plant-soil-microbe interactions that occur in the rhizosphere, as well as processes with important implications to ...

Modification and Application of a Leaf Blower-vac for Field Sampling of Arthropods

Wijziging en toepassing van een bladblazer-vac voor Field Sampling geleedpotigen

Rice fields host a large diversity of arthropods, but investigating their population dynamics and interactions is challenging. Here we describe the ...

Reliable Method for Assessing Seed Germination, Dormancy, and Mortality under Field Conditions

Betrouwbare methode voor het beoordelen van zaadkieming, zaadrust en Sterfte onder veldomstandigheden

We describe techniques for approximating seed bank dynamics over time using Helianthus annuus as an example study species. Strips of permeable polyester ...

Field Experiments of Pollination Ecology: The Case of Lycoris sanguinea var. sanguinea

Field Experiments of Pollination Ecology: The Case of Lycoris sanguinea var. sanguinea

Veldexperimenten van Bestuiving Ecologie: De zaak van<em&gt; Lycoris sanguinea</em&gt; Var.<em&gt; sanguinea</em

Plant-pollinator interactions have been studied for approximately one hundred years. During that time, many field methods have been developed to clarify ...

Use of a Filter Cartridge for Filtration of Water Samples and Extraction of Environmental DNA

Het gebruik van een filter cartridge voor filtratie van watermonsters en Winning van Environmental DNA

Recent studies demonstrated the use of environmental DNA (eDNA) from fishes to be appropriate as a non-invasive monitoring tool. Most of these studies ...

Development of Metarhizium anisopliae as a Mycoinsecticide: From Isolation to Field Performance

Development of Metarhizium anisopliae as a Mycoinsecticide: From Isolation to Field Performance

Ontwikkeling<em&gt; Metarhizium anisopliae</em&gt; Als een mycoinsecticide: van isolatie tot veldprestatie

A major concern when developing commercial mycoinsecticides is the kill speed compared to that of chemical insecticides. Therefore, isolation and ...

Experimental Methods of Dust Charging and Mobilization on Surfaces with Exposure to Ultraviolet Radiation or Plasmas

Experimentele methoden van stof opladen en mobilisatie op oppervlakken met blootstelling aan ultraviolette straling of plasma 's

Electrostatic dust transport has been hypothesized to explain a number of observations of unusual planetary phenomena. Here, it is demonstrated using ...

A Video Surveillance System to Monitor Breeding Colonies of Common Terns (Sterna Hirundo)

A Video Surveillance System to Monitor Breeding Colonies of Common Terns Sterna Hirundo

Een Video surveillancesysteem te controleren met het fokken van kolonies visdieven (Sterna Hirundo)

Many waterbird populations have faced declines over the last century, including the common tern (Sterna hirundo), a waterbird species with a widespread ...