Name: anatomically inspired three-dimensional micro-tissue engineered neural networks for nervous system reconstruction, modulation, and modeling
Uploaded: 2017-05-31T14:00:00
Description: Watch this Scientific Journal Video about Anatomically Inspired Three-dimensional Micro-tissue Engineered Neural Networks for Nervous System Reconstruction, Modulation, and Modeling at JoVE.com

Financial support was provided by the National Institutes of Health U01-NS094340 (Cullen), T32-NS043126 (Harris), and F31-NS090746 (Katiyar)), the Michael J. Fox Foundation (Therapeutic Pipeline Program #9998 (Cullen)), the Penn Medicine Neuroscience Center Pilot Award (Cullen), the National Science Foundation (Graduate Research Fellowships DGE-1321851 (Struzyna and Adewole)), the Department of Veterans Affairs (RR&#38;D Merit Review #B1097-I (Cullen)), the American Association of Neurological Surgeons and Congress of Neurological Surgeons (2015-2016 Codman Fellowship in Neurotrauma and Critical Care (Petrov)), and the U.S. Army Medical Research and Materiel Command (#W81XWH-13-207004 (Cullen) and W81XWH-15-1-0466 (Cullen)).

All procedures involving animals were approved by the Institutional Animal Care and Use Committees at the University of Pennsylvania and the Michael J. Crescenz Veterans Affairs Medical Center and adhered to the guidelines set forth in the NIH Public Health Service Policy on Humane Care and Use of Laboratory Animals (2015).
1. Development of the Agarose Hydrogel (Acellular Component of micro-TENNs)
<ol>
	<li>Agarose solution preparation
	<ol>
		<li>Within a biosafety cabinet...

CNS injury and disease typically result in the loss or dysfunction of the long-distance axonal pathways that comprise the brain connectome, with or without concomitant neuronal degeneration. This is compounded by the limited capacity of the CNS to promote neurogenesis and regeneration. Despite the pursuit of repair strategies such as growth factor, cell, and biomaterial delivery as individual or combinatorial approaches, these techniques fail to simultaneously account for both the degeneration of neuronal cells and the l...

A common characteristic of disorders and diseases of the central nervous system (CNS), such as traumatic brain injury (TBI), spinal cord injury (SCI), stroke, Alzheimer&#39;s disease, and Parkinson&#39;s disease, is the disconnection of axonal pathways and neuronal cell loss1,2,3,4,5,6. For instance, when an ischemic stroke goes untreated, it is estimated that axons are lost at a rate of 7 miles of axons per minute5. In the case of TBI, which approximately 1.7 million people experience each year in the U.S. alone, axonal degeneration may continue to occur years after trauma, as the initial injury precipitates a long-term neurodegenerative state4. Aggravating these deleterious effects, the CNS has a severely limited capacity for regeneration1,7,8,9. Following injury, an inhibitory environment develops that is characterized by a lack of directed guidance to distant targets, the presence of myelin-associated inhibitors that hinder neurite outgrowth, and the formation of a glial scar by reactive astrocytes8,10,11,12. The glial scar serves as a biochemical and physical barrier to regeneration, with molecules such as chondroitin sulfate proteoglycans obstructing axon outgrowth8,11. Furthermore, even though neural stem cells have been found in the adult CNS, the production of new neurons is limited, as consistent evidence of neurogenesis has only been found in the olfactory bulb, the hippocampal subgranular zone, the periventricular area, and the central canal of the spinal cord13,14. These obstacles prevent the functional recovery of lost neurons and white matter architecture following injury or disease, resulting in the often life-changing and prolonged effects of these conditions.
Despite the lack of regenerative capacity in the adult CNS, it has been demonstrated that axonal regeneration is possible if adequate environmental cues are presented to host neurons15,16,17,18. Researchers have attempted to deliver and manipulate growth factors (e.g., nerve growth factor, epidermal growth factor, glial-dependent growth factor, and neurotrophic factor-3) and other guidance molecules to stimulate plasticity and axon regeneration14,18,19. Even though these studies have confirmed that adult axons are capable of responding to growth factors, these strategies are limited by the low permeability of the blood-brain barrier and the specific spatial and temporal gradients required to promote regeneration14,18,19. Other approaches have relied on the hyperactivation of regeneration-related transcription factors in CNS neurons. For example, overexpression of the Stat3 transcription factor stimulated axonal regeneration in the optic nerve20. Nevertheless, both biomolecule delivery and overexpression of transcription factors fail to replace lost neuronal populations. Cell-based strategies have mainly centered on transplanting neural stem cells (NSCs) into the CNS, taking advantage of their capacity to replace CNS neurons, release trophic factors, and support the attempts at neurogenesis that occur after injury17. In spite of this, there are still pressing challenges hindering this approach, including the hampered ability of transplanted neural cells to survive, integrate with the host, and remain spatially restricted to the injured area6,14,17,21. In addition, cell delivery alone is incapable of reinstating the cytoarchitecture of damaged or lost axonal pathways. An alternative approach that addresses the problems facing cell and drug/chemical delivery strategies is combining these approaches with the use of biomaterials14,22,23. Biomaterials such as hydrogels are capable of emulating the biochemical and physical properties of the extracellular matrix (ECM), aiding in cell delivery and retention within the injured area, and delivering growth factors and other bioactive molecules with controlled release22. The attractive characteristics of these biomaterial-based strategies have resulted in evidence of in vivo axonal regeneration after the transplantation of scaffolds to the lesioned area24,25,26,27,28,29,30. However, acellular biomaterial strategies do not replace lost neuronal populations; when used as delivery vehicles for neuronal, glial, or neuronal precursor cells, biomaterials are incapable of reconstituting long-distance axonal networks. The challenge of developing an approach that tackles both the axonal pathway degeneration and neuronal loss associated with CNS injury and disease still remains31.
Our research group previously reported the development of implantable micro-tissue engineered neural networks (micro-TENNs), which are a type of &#160;&#34;living scaffold&#34; consisting of neuronal cell bodies restricted to one or both ends of an agarose hydrogel-ECM micro-column, with aligned axonal tracts extending throughout the interior of this three-dimensional (3D) encasement1,10,31,32. One of the main differences between this technique and previous approaches is that the cytoarchitecture of micro-TENNs is created completely in vitro and is transplanted afterwards33,34,35,36,37,38,39,40,41. In vitro fabrication offers extensive spatial and temporal control of cellular phenotype and orientation, mechanical/physical properties, biochemical cues, and exogenous factors, which benefits the integration of these scaffolds with the host after implantation41,42. Micro-TENNs are anatomically inspired because they emulate brain neuroanatomy, displaying axonal tracts similar to those that bridge distinct functional regions of the brain (Figure 1A)1. Therefore, this strategy may be able to physically replace lost white matter tracts and neurons following implantation into a lesioned region. This technique is also inspired by developmental mechanisms in which &#34;natural living scaffolds&#34; formed by radial glial cells and pioneering axons act as pathfinding guides for cell migration from the subventricular zone and axonal outgrowth, respectively43. These mechanisms are recapitulated in the aligned axonal tracts of micro-TENNs, which can present living pathways for neural cell migration and axonal regeneration by axon-mediated axonal outgrowth (Figure 1C)43. Furthermore, this strategy takes advantage of synaptic integration between the micro-TENN neurons and native circuitry, forming new relays that may contribute to functional recovery (Figure 1B)43. The capacity for synapse formation may also grant this approach the ability to modulate the CNS and respond to host tissue according to network feedback. For example, optogenetically active neurons in the living scaffolds may&#160;be stimulated to modulate host neurons through synaptic interactions (Figure 1D).
In addition, the biomaterial-based tubular construction of micro-TENNs offers an adequate environment for cell adhesion, growth, neurite extension, and signaling, while the miniature dimensions of the constructs potentially permit minimally invasive implantation and provide a partially sequestered microenvironment for gradual integration into the brain. Indeed, recent publications have demonstrated the potential of micro-TENNs to mimic neural pathways following implantation into the rat brain. Following stereotaxic microinjection, we previously reported evidence of micro-TENN neuronal survival, maintenance of axonal tract architecture, and neurite extension into the host cortex out to at least 1 month in vivo10,31. Moreover, labeling with synapsin provided histological evidence of synaptic integration with native tissue10,31. Overall, micro-TENNs may be&#160;uniquely suited to reconstruct and modulate damaged CNS by replacing lost neurons, synaptically integrating with host circuitry, restoring lost axonal cytoarchitecture, and, in certain cases, providing regenerating axons with the appropriate pathfinding cues.
<img alt="Figure 1" src="/files/ftp_upload/55609/55609fig1.jpg" /> 
Figure 1: Principles and inspiration behind the development of micro-tissue engineered neural networks (micro-TENNs). (A) Micro-TENNs mimic the cytoarchitecture of the brain connectome (purple), in which functionally distinct regions are connected by long, aligned axonal tracts in a unidirectional (red, green) or bidirectional (blue) manner. As an example, micro-TENNs could reconstitute lost connections in corticothalamic and nigrostriatal pathways&#160;or in the perforant pathway from the entorhinal cortex to the hippocampus&#160;(adapted from Struzyna et al., 2015)1. (B) Diagram of a unidirectional and bidirectional micro-TENN (red and blue, respectively) synaptically integrating with the host circuitry (purple) to serve as a functional relay between both ends of a lesion. (C) Schematic of the axonal tracts of a unidirectional micro-TENN (green) serving as a guide for axon-facilitated regeneration of host axons (purple) towards a target with which the micro-TENN interacts. (D) Conceptual diagram of the use of optogenetically active micro-TENNS as neuromodulators, taking advantage of synaptic integration with excitatory or inhibitory neurons (bottom). <a href="http://cloudflare.jove.com/files/ftp_upload/55609/55609fig1large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
The current manuscript details the methodology utilized to fabricate micro-TENNs using embryonically derived cerebral cortical neurons. Notably, micro-TENNs could be fabricated with other types of neural cells. For example, the initial reports of successful micro-TENN development featured dorsal root ganglion (DRG) neurons32. The hydrogel micro-columns can be generated (Figure 2A) by adding liquid agarose to a custom-made, laser-cut cylindrical channel array or to capillary tubes, both containing aligned acupuncture needles. The needle forms the lumen and determines the inner diameter (ID) of the micro-column, while the capillary tube ID and the diameter of the cylinders in the laser-cut device dictate the outer diameter (OD) of the constructs. The OD and ID can be chosen according to the desired application by selecting different diameters for the device/capillary tubes and the acupuncture needles, respectively. The length of the micro-columns can also be varied; to date, we have reported the construction of micro-TENNs up to 20 mm in length10 and are actively pursuing even longer lengths. After the agarose gels and the acupuncture needles are removed, an ECM solution generally consisting of type I collagen and laminin is added to the lumen of the constructs (Figure 2C). The ECM core provides a scaffold to support neuronal cell adhesion and axonal outgrowth. Initially, primary rat cortical neurons were plated in the micro-columns using dissociated cell suspensions10,31,32. However, this approach did not produce the target cytoarchitecture in all cases, which was defined as the neuronal cell bodies restricted to the ends of the micro-columns, with the central lumen comprised of pure aligned axonal tracts. Since then, the use of a forced neuronal aggregation method (based on protocols adapted from Ungrin et al.) has enabled a more reliable and consistent fabrication of micro-TENNs with the ideal structure (Figure 2B)44. In addition to describing the current methodology, this article will show representative phase-contrast and confocal images of micro-TENNs that demonstrate the formation of axonal tracts over time, as well as the finalized target cytoarchitecture. This manuscript will also expand on noteworthy aspects of the protocol and remaining challenges and future directions of the micro-TENN technology.
<img alt="Figure 2" src="/files/ftp_upload/55609/55609fig2.jpg" /> 
Figure 2: Schematic diagram of the three-stage micro-TENN fabrication process. (A) Development of the agarose hydrogel: (i) Initially, a small acupuncture needle (e.g., 180-350 &#181;m in diameter) is inserted into the cylindrical channels of a custom-made, laser-cut mold or a capillary tube (e.g., 380-700 &#181;m in diameter). In the next step, liquid agarose in DPBS is introduced into the cylindrical channels or capillary tubes. (ii) After the agarose gels, the needle is removed and the mold is disassembled to yield the hollow agarose micro-columns. (iii) These constructs are then sterilized and stored in DPBS. (B) Primary neuron culture and the aggregate method: (i) Neuronal aggregation is performed in pyramidal micro-well arrays, cast from 3D-printed molds, that fit in the wells of a 12-well culture plate. (ii) Micro-TENNs include primary rat neurons dissociated from fetal brains of embryonic-day-18 rats. Following tissue dissociation with trypsin-EDTA and DNase I, a cell solution with a density of 1.0-2.0 x 106 cell/mL is prepared. (iii) 12 &#181;L of this solution are transferred to each well in the pyramidal micro-well array. The plate containing these micro-wells is centrifuged to produce cell aggregates. (iv) These are then incubated overnight prior to plating in the micro-columns. (C) ECM core fabrication and cell seeding: (i) Prior to cell seeding, an ECM solution containing 1 mg/mL type I collagen and 1 mg/mL laminin is transferred to the interior of the micro-TENNs and allowed to polymerize. (ii) Depending upon whether unidirectional or bidirectional micro-TENNs are being fabricated, an aggregate is placed at either one or both extremes of the micro-column, respectively. (iii) Following a period of incubation to promote adhesion, micro-TENNs are cultured in Petri dishes flooded with supplemented embryonic neuronal basal medium. (iv) After 3-5 days in culture, the final micro-TENN structure should demonstrate cell aggregates at the extremes of the micro-column, with axonal tracts spanning its length. <a href="http://cloudflare.jove.com/files/ftp_upload/55609/55609fig2large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>

<table border="0" cellpadding="0" cellspacing="0" width="1571">
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Laser cutter</td>
			<td style="width:195px;">Universal Laser Systems</td>
			<td style="width:119px;">PLS4.75</td>
			<td style="width:944px;">Used to fabricate the laser-cut micro-channel mold.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Laser-cut micro-column fabrication device</td>
			<td style="width:195px;">Custom-made</td>
			<td style="width:119px;">--------------</td>
			<td>Contact our research group if interested. Dimensions and blueprints provided in the manuscript.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Screws</td>
			<td style="width:195px;">--------------</td>
			<td style="width:119px;">--------------</td>
			<td>#4-40 with a thread diameter of 3.05 mm</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Nuts</td>
			<td style="width:195px;">--------------</td>
			<td style="width:119px;">--------------</td>
			<td>#4-40 with a thread diameter of 3.05 mm</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Acupuncture needle (180 &#181;m diameter)</td>
			<td style="width:195px;">Lhasa Medical</td>
			<td>sj.16X40</td>
			<td>The diameter may be varied according to the desired size for the micro-column lumen.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Petri dish</td>
			<td style="width:195px;">Fisher</td>
			<td>08772B</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Dulbecco&#39;s phosphate buffered saline (DPBS)</td>
			<td style="width:195px;">Invitrogen</td>
			<td>14200075</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Polystyrene disposable serological pipet</td>
			<td style="width:195px;">Fisher</td>
			<td>13-678-11D</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Agarose</td>
			<td>Sigma</td>
			<td>A9539-50G</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Capillary tube (398 &#181;m diameter)</td>
			<td style="width:195px;">Fisher</td>
			<td>21170D</td>
			<td>The diameter may be varied according to the desired size for the micro-column shell.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Hot plate</td>
			<td style="width:195px;">Fisher</td>
			<td>SP88857200</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Magnetic bar</td>
			<td style="width:195px;">Fisher</td>
			<td>1451352</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Micropipette</td>
			<td style="width:195px;">Sigma</td>
			<td>Z683884-1EA</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">25 mm gauge needle</td>
			<td style="width:195px;">Fisher</td>
			<td style="width:119px;">14-826-49</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Microscalpel</td>
			<td style="width:195px;">Roboz Surgical</td>
			<td>RS-6270</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Scissors</td>
			<td style="width:195px;">Fine Science Tools</td>
			<td>14081-09</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Forceps</td>
			<td>World Precision Instruments</td>
			<td>501985</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Hot bead sterilizer</td>
			<td style="width:195px;">Sigma</td>
			<td>Z378550-1EA</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Stereoscope</td>
			<td style="width:195px;">Nikon</td>
			<td>SMZ800N</td>
			<td>Used for all dissection steps and for micro-TENN fabrication.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Rat tail type I collagen</td>
			<td style="width:195px;">Corning</td>
			<td>354236</td>
			<td>Maintain at 4 &#186;C and remove only when needed.&#160; Use ice to preserve its temperature when in use.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Microcentrifuge tube</td>
			<td style="width:195px;">Fisher</td>
			<td>02-681-256</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Mouse laminin</td>
			<td style="width:195px;">Corning</td>
			<td>354232</td>
			<td>Maintain at 4 &#186;C and remove only when needed.&#160; Use ice to preserve its temperature when in use.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Neurobasal medium</td>
			<td style="width:195px;">Invitrogen</td>
			<td>21103049</td>
			<td>Basal medium for the culture of pre-natal and embryonic neuronal cells. Store at 4&#186;C and warm at 37 &#186;C before use.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Sodium hydroxide (NaOH)</td>
			<td style="width:195px;">Fisher</td>
			<td>SS2661</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Hydrochloric acid (HCl)</td>
			<td style="width:195px;">Fisher</td>
			<td style="width:119px;">SA48-1</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Litmus paper</td>
			<td style="width:195px;">Fisher</td>
			<td>09-876-18</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Hank&#39;s balanced salt solution (HBSS)</td>
			<td style="width:195px;">Invitrogen</td>
			<td>14170112</td>
			<td>Store at 4 &#186;C.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">0.25% Trypsin-EDTA</td>
			<td style="width:195px;">Invitrogen</td>
			<td>25200056</td>
			<td>Store at -20 &#186;C and warm at 37 &#186;C before use.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:315px;">Bovine pancreatic deoxyribonuclease (DNase) I</td>
			<td style="width:195px;">Sigma</td>
			<td>10104159001</td>
			<td>Store at -20 &#186;C and warm at 37 &#186;C before use.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">B-27 Supplement</td>
			<td style="width:195px;">Invitrogen</td>
			<td>12587010</td>
			<td>Supplement added to Neurobasal medium for the culture of hippocampal and cortical neurons. Store at -20 &#186;C and warm at 37 &#186;C before use.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">L-glutamine&#160;</td>
			<td style="width:195px;">Invitrogen</td>
			<td>35050061</td>
			<td>Store at -20 &#186;C and warm at 37 &#186;C before use.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Sprague Dawley embryonic day 18 rats</td>
			<td style="width:195px;">Charles River</td>
			<td style="width:119px;">Strain 001</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Pasteur pipette</td>
			<td style="width:195px;">Fisher</td>
			<td style="width:119px;">22-042816</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">15 mL centrifuge tube</td>
			<td style="width:195px;">EMESCO</td>
			<td>1194-352099</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Vortex</td>
			<td style="width:195px;">Fisher</td>
			<td>02-215-414</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Centrifuge</td>
			<td style="width:195px;">Fisher</td>
			<td>05-413-115</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Hemocytometer</td>
			<td style="width:195px;">Fisher</td>
			<td>02-671-6</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Objet30 3D-Printer</td>
			<td style="width:195px;">Stratasys&#160;</td>
			<td>--------------</td>
			<td>Used to fabricate the pyramidal micro-well molds.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">3D-printed pyramidal well mold</td>
			<td style="width:195px;">Custom-made</td>
			<td style="width:119px;">--------------</td>
			<td>Contact our research group if interested. Dimensions and blueprints provided in the manuscript.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:315px;">Polydimethylsiloxane (PDMS) and curing agent</td>
			<td style="width:195px;">Fisher</td>
			<td>NC9285739</td>
			<td>Comes as kit with elastomer and curing agent. Use inside a chemical fume hood.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Funnel</td>
			<td style="width:195px;">Fisher</td>
			<td>10-348C</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">1 ml pipette bulb</td>
			<td style="width:195px;">Sigma</td>
			<td>Z509035</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Micro-spatula</td>
			<td style="width:195px;">Fisher</td>
			<td>S50821</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">12-well culture plate</td>
			<td style="width:195px;">EMESCO</td>
			<td>1194-353043</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Oven</td>
			<td style="width:195px;">Fisher</td>
			<td>11-475-154</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Incubator</td>
			<td style="width:195px;">Fisher</td>
			<td>13 998 076</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">AAV1.Syn.GCaMP6f.WPRE.SV40</td>
			<td style="width:195px;">UPenn Vector Core</td>
			<td style="width:119px;">36373</td>
			<td>Store at -80&#186;C. Commercially available adeno-associated virus (AAV) with the GCaMP6f calcium indicator.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Formaldehyde 40%</td>
			<td style="width:195px;">Fisher</td>
			<td style="width:119px;">F77P-4</td>
			<td>Formaldehyde is a toxic compound known to be carcinogenic, and must be disposed of in a separate container.&#160;</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Triton X-100</td>
			<td style="width:195px;">Sigma</td>
			<td style="width:119px;">T8787</td>
			<td>Non-ionic surfactant used to permeabilize cell membranes.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Horse serum</td>
			<td style="width:195px;">Gibco</td>
			<td style="width:119px;">16050-122</td>
			<td></td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:315px;">Mouse anti-Tuj-1/beta-III tubulin primary antibody</td>
			<td style="width:195px;">Sigma</td>
			<td>T8578-200UL</td>
			<td>Store at -20&#186;C.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Rabbit anti-synapsin 1 primary antibody</td>
			<td>Synaptic Systems</td>
			<td>106-001</td>
			<td>Store at -20&#186;C.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Donkey anti-mouse 568 secondary antibody</td>
			<td style="width:195px;">Invitrogen</td>
			<td style="width:119px;">A10037</td>
			<td>Store at 4&#186;C.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">Donkey anti-rabbit 488 secondary antibody</td>
			<td>Invitrogen</td>
			<td>A21206</td>
			<td>Store at 4&#186;C.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Hoechst 33342, Trihydrochloride</td>
			<td>Invitrogen</td>
			<td>H3570</td>
			<td>Store at 4&#186;C.&#160; Hoechst is a known mutagen that should be treated as a carcinogen.&#160; Therefore, it must be disposed of in a separate container.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">A1RSI Laser Scanning Confocal Microscope&#160;</td>
			<td style="width:195px;">Nikon</td>
			<td style="width:119px;">--------------</td>
			<td>Used for taking the confocal reconstructions of immunolabeled constructs.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">Eclipse Ti-S Microscope&#160;</td>
			<td>Nikon</td>
			<td style="width:119px;">--------------</td>
			<td>Used for taking the phase-contrast images.&#160; With digital image acquisition using a QiClick camera interfaced with Nikon Elements Basic Research software (4.10.01).</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:315px;">High-speed Fluorescence Microscope</td>
			<td style="width:195px;">Nikon</td>
			<td style="width:119px;">--------------</td>
			<td>Nikon Eclipse Ti microscope paired with an ANDOR Neo/Zyla camera for calcium imaging.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;">NIS Elements AR 4.50.00 Software</td>
			<td style="width:195px;">Nikon Instruments</td>
			<td style="width:119px;">--------------</td>
			<td>Used to identify calcium transients from the recordings taken with the high-speed fluorescence microscope.&#160;</td>
		</tr>
	</tbody>
</table>

anatomically inspired three-dimensional micro-tissue engineered neural networks for nervous system reconstruction, modulation, and modeling

Functional recovery rarely occurs&#160;following injury or disease-induced degeneration within the central nervous system (CNS)&#160;due to the inhibitory environment and the limited capacity for neurogenesis. We are developing&#160;a strategy to simultaneously address&#160;neuronal and axonal pathway loss within the damaged CNS. This manuscript presents the fabrication protocol for micro-tissue engineered neural networks (micro-TENNs), implantable constructs consisting of neurons and aligned axonal tracts spanning the extracellular matrix (ECM) lumen of a preformed hydrogel cylinder hundreds of microns in diameter that may extend centimeters in length. Neuronal aggregates are delimited to the extremes of the three-dimensional encasement and are spanned by axonal projections. Micro-TENNs are uniquely poised as a strategy for CNS reconstruction, emulating aspects of brain connectome cytoarchitecture and potentially providing means for network replacement. The neuronal aggregates may synapse with host tissue to form new functional relays to restore and/or modulate missing or damaged circuitry. These constructs may also act as pro-regenerative&#160;&#34;living scaffolds&#34; capable of exploiting developmental mechanisms for cell migration and axonal pathfinding, providing synergistic structural and soluble cues based on the state of regeneration. Micro-TENNs are fabricated by pouring liquid hydrogel into a cylindrical mold containing a longitudinally centered needle. Once the hydrogel has gelled, the needle is removed, leaving a hollow micro-column. An ECM solution is added to the lumen to provide an environment suitable for neuronal adhesion and axonal outgrowth. Dissociated neurons are mechanically aggregated for precise seeding within one or both ends of the micro-column. This methodology reliably produces self-contained miniature constructs with long-projecting axonal tracts that may recapitulate features of brain neuroanatomy. Synaptic immunolabeling and genetically encoded calcium indicators suggest that micro-TENNs possess extensive synaptic distribution and intrinsic electrical activity. Consequently, micro-TENNs represent a promising strategy for targeted neurosurgical reconstruction of brain pathways and may also be applied as biofidelic models to study neurobiological phenomena in vitro.

Micro-TENNs were monitored using phase-contrast microscopy to assess their cytoarchitecture and axonal outgrowth (Figure 4). Within unidirectional, 2 mm long micro-TENNs, neuronal aggregates were restricted to one end of the micro-column and projected a bundle of axons through the inner core. Axons spanned the entire length of the column by 5 days in vitro (DIV) (Figure 4A). There was a greater initial axonal growth rate in bidirectional 2 mm-lon...

Watch this Scientific Journal Video about Anatomically Inspired Three-dimensional Micro-tissue Engineered Neural Networks for Nervous System Reconstruction, Modulation, and Modeling at JoVE.com

Anatomically Inspired Three-dimensional Micro-tissue Engineered Neural Networks for Nervous System Reconstruction, Modulation, and Modeling

This manuscript details the fabrication of micro-tissue engineered neural networks: three-dimensional micron-sized constructs comprised of long aligned axonal tracts spanning aggregated neuronal population(s) encased in a tubular hydrogel. These living scaffolds can serve as functional relays to reconstruct or modulate neural circuitry or as biofidelic test-beds mimicking gray-white matter neuroanatomy.

Functional recovery rarely occurs&#160;following injury or disease-induced degeneration within the central nervous system (CNS)&#160;due to the inhibitory ...

Research

JoVE Journal

Neuroscience

Designing and Implementing Nervous System Simulations on LEGO Robots

We present a method to use the commercially available LEGO Mindstorms NXT robotics platform to test systems level neuroscience hypotheses. The first step ...

Neural Circuit Recording from an Intact Cockroach Nervous System

The cockroach ventral nerve cord preparation is a tractable system for neuroethology experiments, neural network modeling, and testing the physiological ...

In vivo Optogenetic Stimulation of the Rodent Central Nervous System

In vivo Optogenetic Stimulation of the Rodent Central Nervous System

The ability to probe defined neural circuits in awake, freely-moving animals with cell-type specificity, spatial precision, and high temporal resolution ...

Modeling Astrocytoma Pathogenesis In Vitro and In Vivo Using Cortical Astrocytes or Neural Stem Cells from Conditional, Genetically Engineered Mice

Modeling Astrocytoma Pathogenesis In Vitro and In Vivo Using Cortical Astrocytes or Neural Stem Cells from Conditional, Genetically Engineered Mice

Current astrocytoma models are limited in their ability to define the roles of oncogenic mutations in specific brain cell types during disease ...

In Vitro Modeling of Cancerous Neural Invasion: The Dorsal Root Ganglion Model

In Vitro Modeling of Cancerous Neural Invasion: The Dorsal Root Ganglion Model

One way that solid tumors disseminate is through neural invasion. This route is well-known in cancers of the head and neck, prostate, and pancreas. These ...

Protocol for Three-dimensional Confocal Morphometric Analysis of Astrocytes

As glial cells in the brain, astrocytes have diverse functional roles in the central nervous system. In the presence of harmful stimuli, astrocytes modify ...

Quadruple Immunostaining of the Olfactory Bulb for Visualization of Olfactory Sensory Axon Molecular Identity Codes

The mouse olfactory system is often used to study mechanisms of neural circuit formation&#12288;because of its simple anatomical structure. An Olfactory ...

Simultaneous Recordings of Cortical Local Field Potentials, Electrocardiogram, Electromyogram, and Breathing Rhythm from a Freely Moving Rat

Monitoring the physiological dynamics of the brain and peripheral tissues is necessary for addressing a number of questions about how the brain controls ...

Three-Dimensional Shape Modeling and Analysis of Brain Structures

Statistical shape analysis of brain structures has been used to investigate the association between their structural changes and pathological processes. ...

Transplantation of Chemogenetically Engineered Cortical Interneuron Progenitors into Early Postnatal Mouse Brains

Neuronal development is regulated by a complex combination of environmental and genetic factors. Assessing the relative contribution of each component is ...