I våre studier bruker vi et testbatteri som består av flere forskjellige nevropsykologiske og nevrofysiologiske metoder. Hver test er følsom for forskjellige klasser av CNS aktive stoffer. En stor fordel med denne teknikken er at den tillater gjentatte målinger i løpet av studiedager.
På denne måten kan de i konsentrasjonseffekter relasjoner bestemmes. Fordi dataene behandles og analyseres nesten umiddelbart, kan resultatene brukes til doseopptrappingsbeslutninger uten forsinkelse. For å starte denne prosedyren, slå på strømmen til testbatteridatamaskinen og slå på datamaskinen og skjermene.
Deretter sitter du motivet foran dataskjermen og joysticken. Bekreft motivets foretrukne hånd og juster joysticken tilsvarende. Be motivet holde styrespaken som en penn med armen på bordet.
Deretter starter du testskriptet via det installerte programmet. Fyll ut de forespurte detaljene, for eksempel emne- og studienummer. Deretter utfører du testen ved å klikke start på testassistanseskjermen.
Overvåk motivets ytelse på testassistanseskjermen og oppfordre motivet til å holde sirkelen rundt prikken hvis motivet ikke kan overskride vanskelighetsgraden faktor to. I dette trinnet, identifiser det ytre Canthus av høyre øye. Gjenta denne prosedyren for venstre øye.
Identifiser deretter stedet der jordelektroden, to centimeter over Nasion. Gni grundig stedene i øyeelektrodene ved hjelp av en bomullsslett hudrensingsgel for bioelektrisk måling for å redusere hudimpedansen. Vær forsiktig så du ikke sliper huden.
Men ikke gni for mykt. Deretter tørker du bort restgelen med gasbind. Påfør tre selvklebende elektroder på de forberedte stedene.
Deretter kobler du ledningene til øyeelektrodene, vasket med buffer. Plasser hånden bak trykkknappen på elektroden for å hindre at den presser inn i huden. Rett ledningene langs ørene over skulderen til motivet for å hindre at ledningene henger foran øynene.
Plugg deretter de tre ledningene i elektrodeimpedansmåleren. Start testskriptet via det installerte programmet og fyll ut de forespurte detaljene, for eksempel emne- og studienummer. Start deretter testen på Go-instruksjonen som vises på testassistanseskjermen.
For standard Pharmacode EEG er elektrodene festet til midsagittalledningene. Plasseringene er basert på 10/20-systemet. Her presenterer vi metoden for hviletilstand EEG med øynene lukket;men andre paradigmer, inkludert hendelsesrelaterte potensialer er også mulig.
Mens fire elektroder er tilstrekkelige for mange tilfeller, kan antall elektroder varieres, avhengig av eksperimentet, med maksimalt trettito. Hvis du vil utføre visuell, analog skalatest, må du instruere motivet til å score sin nåværende følelse ved å bruke musen til å merke den visuelle langslinjen som presenteres på skjermen. Informer motivet om at de mest ekstreme punktene på linjen representerer den mest ekstreme følelsen tenkelig.
Start testskriptet, og fyll ut de forespurte detaljene, for eksempel emne- og studienummer. Deretter instruerer du motivet til å starte testen ved å klikke på musen. I kroppen sway test, be motivet å stå foran datamaskinen med avstanden mellom føttene på ca 10 centimeter og armer hengende langs kroppen.
Fest strengen som stammer fra potensiometeret innebygd i testbatteridatamaskinen på midjen til motivet ved hjelp av et klips. Deretter justerer du høyden på bordet med datamaskinen på, til strengen er vannrett. Deretter ber du faget om å lukke øynene.
Start testskriptet, og fyll ut de forespurte detaljene. Deretter starter du testen ved å klikke på start body sway sampling økt på Test Assistance dataskjermen. I den visuelle, verbale læringstesten, instruer emnet, at under den visuelle presentasjonen av ordene, skulle han eller hun nevne ordene når de vises og husker dem.
Og at på slutten av listen, husker ordene med navn. Start testskriptet, og fyll ut de forespurte detaljene. Deretter må du be motivet lese de skriftlige instruksjonene som vises på skjermen.
Fortell motivet at testen vil starte når motivet trykker på mellomromstasten. Skriv inn de tilbakekalte ordene ved å klikke på de tilbakekalte ordene på Test Assistance-skjermen. Vist her er tidsforløpet av gjennomsnittsverdier for tolv friske mannlige for adaptiv sporingstest målt på flere tidspunkter etter legemiddeladministrasjon.
Prosentandelen av riktig sporet presenteres på Y-aksen. Tidspunkt etter dosering er presentert på X-aksen med doble placeboresultater. 10 milligram mecamylamin resultater, 20 milligram Mecamylamine resultater og 0,5 milligram skopolamin.
Testbatteriet er fleksibelt og kan justeres til en bestemt legemiddelprofil. Prosedyren kan også kombineres med andre farmakodynamiske målinger eller med blodprøvetaking eller medisinske vurderinger som EKG og blodtrykk. Dette kan svare på flere spørsmål om sikkerhet og farmakokinetikk.
Testbatteriet gjør det mulig for forskere å utforske hjernens penetrasjon og farmakologiske aktiviteten til nye forbindelser, ikke bare hos friske frivillige, men også hos pasienter med nevrologiske eller psykiatriske lidelser. Etter å ha sett denne videoen, bør du ha en god forståelse av hvordan dette testbatteriet kan brukes til å oppnå følsomme tiltak av stoffet påvirker over et bredt spekter av nevropsykologiske og nevrofysiologiske funksjonelle domener.